Warning in PLM WUI

Hi All,
I am trying to display a document in PLM Web UI, but document is unable to display.
Warning : No entry for document maintained in Viewer customization.
I did all configurations in Viewer.
Any idea................
Thnaks,
Tarun.

Hi Tarun,
Please check the table entries in table /PLMB/CADV_VVAC (view /PLMB/VCADV_VVAC) for your used vieweid.
IMG: PLM WEB UI -> PLM Web Application -> Viewer -> Define Viewer Application.
Best regards,
Roland

Similar Messages

File path defaulted to 'C:\fakepath' when attaching an original on PLM WUI

Hi,
When trying to attach an original via PLM WUI, we notice that the file path is defaulted as 'C:\fakepath' instead of the document path of the original.
We see this behaviour happening only with PLM WUI, and the functionality works perfectly fine with SAP GUI.
Any expert opinions appreciated.
Regards,
Vivek Pandey

HI Vivek,
If you go to Internet Explorer; Tools; Internet Option; Security; Custom; find the "Include local directory path when uploading files to a server" (it is quite a ways down) and click on "Enable" You may have to restart your computer, but this works & eliminates that "fakepath" that inhibits the upload file path.
Regards
Abhishek Aynipully

PLM WUI BOM Enhancement

Hello,
I have a requirement for PLM WUI BOM enhancement. The requirement is adding a custom tab in the item details view....
I have tried with call method io_oif->add_subview and call method io_oif->add_mainview.
Could anyone guide me in this topic? Thanks!!
Regards,
Saravana

Hello,
Thanks for your replies....
I have enhanced Web Dynpro component /PLMU/WDC_MBOM by adding a new view. But still the new tab is not populated in item details view.... is anything else, we need to check ?
Regards,
Saravana

Configuration Guide for PLM WUI

Hi All,
Does anyone have a link to Configuration Guide for PLM WUI?..
I do have SAP PLM 7.0 Master Guide, but I am looking specifically for Config guide for PLM WUI
Thanks in Advance
Regards,
Aby

Hi Aby,
you can find the online help here:
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/fc/30f52becb143aaa23aeecc5eb2cfcb/frameset.htm |http://help.sap.com/erp2005_ehp_04/helpdata/EN/fc/30f52becb143aaa23aeecc5eb2cfcb/frameset.htm ]
In case you are using the Enterprise Portal, you can find more about the new PLM Business Package here:
ht[http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/31e187540f48a8a83fe8f9c6cd2885/frameset.htm|http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/31e187540f48a8a83fe8f9c6cd2885/frameset.htm]
PLM Wiki
[http://wiki.sdn.sap.com/wiki/display/PLM/PLM|http://wiki.sdn.sap.com/wiki/display/PLM/PLM]
Martin

How to delete Root Context for ACC - PLM WUI

Hi All,
Is there any way to delete the Root Context already created in R3 for ACC
Regards,
Aby

Hi Neil,
The contexts are stored int able HRP7600..
We deleted the root contexts which were not created properly from there..
Regards,
Aby

PLM 7.02 WUI Navigation settings

Hello,
       When i enter a BOM in display mode, I see a hyperlink in the bom items. If we click that it will go to classic material master view.
We are using PLM and MDG-M. My requirement is as follows....When we click the BOM items, it should go to MDG-M material master not the classic material master view.
        Kindly let me know the configuration settings/the process of linking the navigation from PLM WUI to the MDG-M. Thanks!!
Regards,
Saravana

Hi Saravana,
you have 2 options:
1. reach it with launchpad customizing (transaction: LPD_CUST)
Open the following entry:
PLM     CM_MAT_BOMMAT    Context Menu for Material - for BOM OIF
Here you can define a new context menu entry to navigate to your target (MDG-M). Then you can open it in MDG-M with a right click on the material number in the BOM and selecting the menu item you just created.
2. you can change the behaviour of the left click on the material
I can be custom development or you can try to use one of the following BAdIs:
Product Lifecycle Management (PLM) -> PLM Web User Interface -> Settings for BO Framework and Navigation -> Navigation, Parameter Mapping, and Services -> Business Add-Ins for Navigation and Parameter Mapping
a)     BAdI: UI Framework Parameters
b)     BAdI: Context Menu
Best regards
Tamas

PLM UI: How to hide fields in Create Engineering record screen?

Hi Experts,
I have an requirement, where I need to hide fields that are present in "Create Engineering Record" screen, I need only 4 to 5 fields among them I want remaining fields to be hidden.
Please kindly help me in achieving this.
Thanks in advance!
Thanks and regards,
Prathyusha Rudraraju

Hello Prathyusha,
I assumed that you want some fields to be invisible for all scenarios so i suggested the option of configuration instead of enhancing the SAP Standard component.
and i would copy paste what i already wrote
"So if your use case includes that fields needs to be hidden for all users and for all clients you should go for Configuration
and if it is only for selected clients you could go for Customization.
and if it is only for selected users you could go for personalization "
I am sorry i completely overlooked that you want to achieve that as per user role, i would suggest you to read about Access Control Management, and revisit whether you want to change the UI or you dont want to display data as per user role and all those operations update create as per the role.
Impact of ACM on the Work with PLM Web UI - Authorizations and Access Control Context (PLM-WUI-APP-ACC) - SAP Library

Standard SAP PLM ICF Services missing

Hello All,
I am currently working on SAP ECC 6.0 Ehp6.I need to access Change Management functionalites from NWBC on html.
I have assigned suitable roles and i could able to get the Menu to create the CHange Number but it shoots an error when i try to Create.
I have identified that wda_ecn_oif service is not available under webdynpro/plmu/.
How to add the standard PLM ICF services to the existing System?
I also see that PLMWEBUI 7.0 software component is missing.Is is required to get the standard PLM ICF services in place.If so please let me know the installation procedure for PLMWEBUI 7.0 software component to my existing system
Regards,
Praveen.

Hello Praveen,
i think the ICF services are added to your system with the PLM Core.
You need minimum the following software componets for the PLM Core:
SAP WEB UIF 7.0
EA_APPL 604
SAP APPL 604
EA-iPPE 404
PLMWUI 700
Please check if you have these.
For the Configuration an Installation of the PLMWUI there is an discussions which might help you.
Configuration Guide for PLM WUI | SCN
Regards,
Pascal

Customizing Launchpad im PLM 7 - switch to transaction and closing the new

Hello,
I have the following problem:
We want to establish the WebUI for PLM 7 in our company step by step. At first, we want to rollout the NWBC for Windows with a user role that provides the SAP standard control center with the object independent search and the personal list of objects. If you click on a link to an object in the hit list of the search, you normally jump to the corresponding WebUI of the object. In difference to this behavior, I configured in the launchpad (TA lpd_cust) that the system opens the u201Coldu201D transaction in a new window instead of opening the WebUI, for example the transaction mm03 for u201Cdisplay materialu201D. This works fine, but when I close the window I get a popup with the error message u201CThe transaction was terminated by the useru201D.
My question: Is there a possibility to avoid this error message?
kind regards,
Rainer

Hi Rainer
In PLM WUI for Material - We have You can Also. Here we do provide "Display Material in ERP" (essentially MM03) to be launched as SAP GUI for HTML.
The same customziing lpd_cust is used for "Navigation" (lets say from Search Results) or "You can Also" in detailed screen of Material.
Could you check if
- YCA in Display Material - launches SAP GUI for HTML. And you can close (x) the tab with out error. You can close via "exit" button as well, which launches a pop-up to save unsaved data etc..
- then check if context menu customzing you have created has same customizing as YCA -> Display Material in ERP.
I tried in my test system at SAP labs and it works.
Regards
Kiran

Error while checking-in Document using PLMWUI

Hi All,
When we try to check-in an original file from PLM WUI to DMS_C1-ST it is not allowing to save.. An error is displayed as "Security list does not exist "
We can check-in the document in R3, but the same is not wrking from PLM WUI..
Any idea why this is happening..? User has all roles related to SAP_PLMWUI
Regards,
Aby
Edited by: Aby Thomas on May 4, 2010 11:52 AM
Edited by: Aby Thomas on May 4, 2010 11:59 AM

Hi Marcus,
We are accessing the Document through Netwear portal using PLM WUI..
Parameter vaues I have mentioend iis n the whitelist setup in spro-sap netweaver-application server-webdynpro abap-set up whitelist
Inside that for each application we need to define parameter vaues, I am not sure what is the value I should give there..
The error says - Incorrect parameter vlaues while trying to display the document.. Its opening using the "Copy to " option but not from "Display" option in PLM WUI..
Hope I am clear..
Regards,
Aby

White list error message

Hi Experts!
We have an issue when displaying originals(in DIRs) in PLM WUI, Portal.
The issue can be summarized like this:
JPG-Images or PDF files are stored on a shared folder. (Not in SAP System)
We then create an original in a DIR(document info record). We do NOT check in the original but only use file as a link.
(In our solution we will not check in the originals but the versioning will be controlled in the linked folder).
Example:
We create an original with the following link
sharedfolder\images\image01.jpg
Anyone can afterwards log on the system and click display original and the jpf or pdf is shown.
This procedure works perfectly fine when we are in SAPGUI.
But in the Portal the system acts different from case to case.
Case 1
When a colleague of mine has added an original in SAPGUI and I
then press display in Portal I get a security list error message, Wrong downloading server
(We have defined the white list, TCode wdr_acf_wlist, and downloaded it.
In this case we have tried
sharedfolder\images\ as downloading server for example)
Case 2
When I have added an original in SAPGUI and then press display in the Portal the image is shown
->Why do I NOT get the error message in this case?
Any ideas why the system works this way and how I can solve it?
Thanks in advance!
Mikael

Hi Mikael,
I was led to this thread via search on SDN for "white list". We need to set up an external facing portal and need to set up reverse proxy plus white list. We have an OSS message running with prio very high but don't seem to get a helpful answer. Can you give info on how to configure the revese proxy (we aim at citrix gateway as reverse proxy) with white list? or can you describe your architecture with focus on white list? very kind regards, Matthias Kasig

SAP ME 6.0 with Product Visualization 7.2

Hi,
In SAP ME 6.0 Test&Repair has been replaced by Product Visualization.
I have downloaded it from SAP Portal, but when running the executable on my client (32-bit Windows 7)
it starts Extracting files, but then the installation does not go any further.
I get a log file in the folder C:\Program Files\SAP\SapSetup\LOGs, which is pretty interesting.
First it is extracting all files to my temporary directory, but when the setup should begin the log file has these lines:
11:26:00 SapSelfX 1 CreateProcess() on C:\Users\NORDEB~1\AppData\Local\Temp\Temp.Sap\PV7201_0-20007860\SapA00B\Setup\NwSapSetup.exe /product:PV /noRestart
11:26:00 SapSelfX 1 with current directory C:\Users\NORDEB~1\AppData\Local\Temp\Temp.Sap\PV7201_0-20007860
11:26:00 SapSelfX 1E Exit code: 2
The installation tries to run the executable NwSapSetup.exe, but that file is not extracted. The name of the setup executable extracted is: SapPVSetup.exe
Have anyone succeeded in installing Product Visualization 7.2?
Br,
Johan

Hi Johan,
I've just installed PV7200_0-20007860.exe on my Vista 32bit - and it works fine. But running PV7201_0-20007860.exe seems to lead nowhere. You might need to submit a ticket against PLM-WUI-APP-VWR component.
Regards,
Sergiy

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

DMS Errors in PLM Web UI

Hi Folks,
I am running into errors when trying to edit an original and add an original to a DIR using the PLM Web UI (everything works fine in SAPGUI).
Upon opening the DIR (which as created in SAPGUI) I get the warning "No entry for the document maintained in viewer customizing". Not sure exactly what this is referring to and I could not find anything in customizing. If I try to edit or add an original I get the message "Inconsistent security list".
After searching forums and notes I came across note 1224097 (PLM Web User Interface: Installation of Applets) which talks about creating white lists using transaction WDR_ACF_WLIST. I am not sure if this is related to my issue, however, when I went into the transaction there was no default white lists as the note mentions. Is this typically done by basis?
Appreciate any help or suggestions you might have in getting the issue resolved. Support pack levels are mentioned below.
SAP_BASIS SAPKB70207
PLMWUI SAPK-70104INPLMWUI
Thanks,
Lashan

administrator can set up the whitelist in Customizing for SAP NetWeaver under SAP
Web Application Server Web Dynpro ABAP Set-Up Active Controls Whitelist .
o The whitelist has to be named DEFAULT.
o File Extension
All files of this type can be executed in an external program by using the
Customizing option %auto%. For more information see Customizing for Logistics
General under Product Lifecycle Management PLM Web User Interface
Objects Document in PLM Web UI Define Workstation Application
o Application
Enter applications to be used for viewing or editing a file.
o Download
Enter at least one directory and one server. The system opens the directory and
all subdirectories for the download.
o Upload
Enter at least one directory and one server. The system opens the directory and
all subdirectories for the upload.
Make an entry for each option (File Extension, Application, Download,
Upload).
o Find the correct server name for upload and download
Working with a local whitelist in a SAP system requires a certificate for the system used.
The administrator must download the certificate using transaction WDR_ACF_GEN_CERT.
Alternatively, the administrator can create the new certificate in Customizing for SAP
NetWeaver under Application Server Web Dynpro ABAP Generate Certificate for
Whitelist
3. Each user has to install the certifcate using transaction ACF_WHITELIST_SETUP.
Alternatively, the user can install the certificate via Customizing for SAP NetWeaver
under Application Server Web Dynpro ABAP Activate Active Controls Whitelist .
o The provided list of whitelists is only for display reasons. The certificate is always
installed for the DEFAULT whitelist.
o You have to install the certificate after each change of the DEFAULT whitelist

Unable to Open Process Route Tab in DIR (PLM webUI page)

Hello PLM Guru's
I am unable to open the Process Route Tab in the DIR Web UI page.I get an error message for "Name: AcfApplet, Publisher : SAP AG , Location :http://..../com_sap_acf_updown.jar".When I click run it keeps running but not opening the Process route page. This does not happen when I open Process route for BOM/Material Master.
Is there any problem with my browser settings or any SAP config?
Kindly advice.
Thanks & Regards
Jo Pz

Hi Jo,
the issue can be with your Java version and SAP ACF version. SAP has just released a new version of ACF which should be compatible with the latest Java version.
You can try to look on the following SAP notes (take the first as first):
1224097 - PLM Web User Interface: Installation of Applets
1868468 - ACF: file upload/download security warning mixed mode
1958459 - AcfUpDownload, AcfExecute, ActiveXControl: Events werden nicht verarbeitet
1854273 - ACF-WDABAP: ACFExecute/Upload: Focus problem
Best regards
Tamas

Warning in PLM WUI

Similar Messages

Maybe you are looking for