Warning - Joikuspot broken with Belle

Be careful:
if you use Joikuspot Premium (makes your phone a wifi hotspot), there are several reports that after the upgrade to Belle it will no longer work on E7, N8, C7.
There is even a warning from Nokia that Joikuspot on C7 will not work.
So if this is important to you, delay the upgrade until Joikuspot will get an upgrade too.
Solved!
Go to Solution.

Hello,
There is no need to worry, Joikuspot will work very well with your
upgraded Belle devices (as you can see, I'm using it right now!).
From @joikuspot twitter tweet, 02/13/12;
"If you use Belle and Joikuspot, remember to turn ON your phone's wifi!"
As you know, easiest way to do it is swipe vertically your phone's screen
from up and make sure the Wi-Fi sign is "blue".
Enjoy your browsing!
-vvaino
#SwitchToLumia

Similar Messages

Joikuspot C7 with Belle

There is some rumour at Nokia's list of incompatibilities with Belle that Joikuspot Premium does not run on C7 under new Symbian Belle.
Can anybody confirm that? It seems strange that only the C7 would have problems.

You have a valid data SIM in this device?
Happy to have helped forum in a small way with a Support Ratio = 37.0

IPhone 3S was used with Bell, then unlocked to use with Rogers. Now I want to use it as iPod (Don't want to activate as phone),but when connecting to iTunes I'm getting message: There is no SIM card, disconnect and insert new SIM card. Help?

I have an old iPhone 3S, that was used with Bell. My friend lost her phone and I lend her this one, which she unlock to use with Rogers. I got it back and want to use as an iPod not the phone, but when I connected to iTunes I am getting this message: "There is no SIM card installed in the iPhone you are attempting to activate. Please diconnect and insert a SIM card".
I went to Bell and Rogers where we tried inserting active cards but message never changed.
On the phone itself I am able to get wifi but finish with "Your phone could not be activated because the activation server is temporary anavailable."
I run diagnostic from iTunes:everything is working properly, only message out of normal is "iTunes is not running in safe mode"
How can I sinc this phone with iTunes, so I can use it to lisen to music?
Any help will be apriacieted

I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where

N8 with BELLE .. attributes of NOTE change always ...

Hi! I've updated my N8 to Symbian Belle.. and It change the file notes simply by opening it without changing it!! This changes the order of my notes!!
You don't know how I'm MAD with Nokia for that reason!!!
The clock in Stand-by I hate, much better the one of Anna!!
The small square on stand-by should be an envelope? Where is the magnifying glass?
I can't see the SMS like BEFORE, I HATE CONVERSATION MODE, I like to see sms like before.. the number of Radio ( that does not rotate) Station has gone away... the zoom of the photo now are slowly than before..
When I save a photo with MODIFY the pic will be saved in the OTHER memory non in the same MEMORY I've choose.. Why?
Why I've updated Belle? Good question.
Thank you
Sorry for my bad english, but Belle will let me go away from NOKIA!!

With Anna was enough to click on the top left corner to change the video aspect ratio when watching a video..now with Belle is more difficult .. click on the bottom, change aspect ratio... was it really necessary?

Warning: Procedure created with compilation errors.

I am trying to upload a pdf file into a blob column of a table. I get this error with these three ways of doing that:Warning: Procedure created with compilation errors.
Any ideas why?
-- THE STORAGE TABLE FOR THE IMAGE FILE
ALTER TABLE PDM
DROP PRIMARY KEY CASCADE;
DROP TABLE PDM CASCADE CONSTRAINTS;
CREATE TABLE PDM (
DNAME VARCHAR2(30), -- DIRECTORY NAME
SNAME VARCHAR2(30), -- SUBDIRECTORY NAME
FNAME VARCHAR2(30), -- FILE NAME
IBLOB BLOB); -- IMAGE FILE
-- CREATE THE PROCEDURE TO LOAD THE FILE
CREATE OR REPLACE PROCEDURE LOAD_FILE (
PDNAME VARCHAR2,
PSNAME VARCHAR2,
PFNAME VARCHAR2) IS
SRC_FILE BFILE;
DST_FILE BLOB;
LGH_FILE BINARY_INTEGER;
BEGIN
SRC_FILE := BFILENAME('PDF_DIR', '266-5210.pdf');
-- INSERT A NULL RECORD TO LOCK
INSERT INTO PDM
(DNAME, SNAME, FNAME, IBLOB)
VALUES
(PDNAME, PSNAME, PFNAME, EMPTY_BLOB())
RETURNING IBLOB INTO DST_FILE;
-- LOCK RECORD
SELECT IBLOB
INTO DST_FILE
FROM PDM
WHERE DNAME = PDNAME
AND SNAME = PSNAME
AND FNAME = PFNAME
FOR UPDATE;
-- OPEN THE FILE
DBMS_LOB.FILEOPEN(SRC_FILE, DBMS_LOB.FILE_READONLY);
DBMS_LOB.OPEN(DST_FILE, DBMS_LOB.LOB_READWRITE);
-- DETERMINE LENGTH
LGH_FILE := DBMS_LOB.GETLENGTH(SRC_FILE);
-- READ THE FILE
DBMS_LOB.LOADFROMFILE(DST_FILE, SRC_FILE, LGH_FILE);
-- UPDATE THE BLOB FIELD
UPDATE PDM
SET IBLOB = DST_FILE
WHERE DNAME = PDNAME
AND SNAME = PSNAME
AND FNAME = PFNAME;
-- CLOSE FILE
DBMS_LOB.FILECLOSE(SRC_FILE);
END LOAD_FILE;
-- THE STORAGE TABLE FOR THE IMAGE FILE
ALTER TABLE PDM
DROP PRIMARY KEY CASCADE;
DROP TABLE PDM CASCADE CONSTRAINTS;
CREATE TABLE PDM
FNAME VARCHAR2(1000)
,IBLOB BLOB
-- CREATE THE PROCEDURE TO LOAD THE FILE
CREATE OR REPLACE PROCEDURE LOAD_FILE AS (
SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
DST_FILE BLOB;
BEGIN
-- INSERT A NULL RECORD TO LOCK
INSERT INTO PDM
(FNAME, IBLOB)
VALUES
('262-2827.pdf', EMPTY_BLOB())
RETURNING IBLOB INTO DST_FILE;
-- OPEN THE FILE
DBMS_LOB.FILEOPEN(SRC_FILE, DBMS_LOB.FILE_READONLY);
DBMS_LOB.OPEN(DST_FILE, DBMS_LOB.LOB_READWRITE);
-- READ THE FILE
DBMS_LOB.LOADFROMFILE( SRC_FILE, DST_FILE);
-- UPDATE THE BLOB FIELD
UPDATE PDM
SET FNAME = SRC_FILE,
IBLOB = DST_FILE;
-- CLOSE FILE
DBMS_LOB.CLOSE(DST_FILE);
DBMS_LOB.FILECLOSE(SRC_FILE);
COMMIT;
END LOAD_FILE;
ALTER TABLE IMAGE_TABLE
DROP PRIMARY KEY CASCADE;
DROP TABLE IMAGE_TABLE CASCADE CONSTRAINTS;
CREATE TABLE IMAGE_TABLE (
ID NUMBER PRIMARY KEY,
IMAGE ORDSYS.ORDIMAGE);
CREATE OR REPLACE DIRECTORY IMAGEDIR AS 'C:\cards\';
GRANT READ ON DIRECTORY IMAGEDIR TO PUBLIC;
GRANT READ ON DIRECTORY MY_FILES TO twilliam;
GRANT READ ON DIRECTORY MY_FILES TO tmwillia;
CREATE OR REPLACE PROCEDURE IMAGE_IMPORT(DEST_ID NUMBER,
FILENAME VARCHAR2)
IS
IMG ORDSYS.ORDIMAGE;
CTX RAW(64) := NULL;
BEGIN
DELETE FROM IMAGE_TABLE
WHERE ID = DEST_ID;
INSERT INTO IMAGE_TABLE (ID, IMAGE)
VALUES (DEST_ID, ORDSYS.ORDIMAGE.INIT())
RETURNING IMAGE INTO IMG;
IMG.IMPORTFROM(CTX, 'FILE', 'IMAGEDIR', FILENAME);
UPDATE IMAGE_TABLE SET IMAGE=IMG WHERE ID=DEST_ID;
END
CALL IMAGE_IMPORT(7142,'125-0502.pdf');
CALL IMAGE_IMPORT(7143,'125-0503.pdf');
SELECT ID,
T.IMAGE.GETHEIGHT(),
T.IMAGE.GETWIDTH()
FROM IMAGE_TABLE T;
SELECT ID,
T.IMAGE.GETFILEFORMAT(),
T.IMAGE.GETCOMPRESSIONFORMAT()
FROM IMAGE_TABLE T;
SELECT ID,
T.IMAGE.GETCONTENTFORMAT(),
T.IMAGE.GETCONTENTLENGTH()
FROM IMAGE_TABLE T;

In the second load_file procedure you should probably change the update command
-- UPDATE THE BLOB FIELD
UPDATE PDM
SET FNAME = SRC_FILE,
IBLOB = DST_FILE;into this
-- UPDATE THE BLOB FIELD
UPDATE PDM
SET IBLOB = DST_FILE
WHERE FNAME = '262-2827.pdf';but I'm not sure how to explain the eof error message. Usually this happens when you forget an "END;" or "END LOOP;" command.
Ok I rechecked and the declaration of the second procedure seems wrong
-- CREATE THE PROCEDURE TO LOAD THE FILE
CREATE OR REPLACE PROCEDURE LOAD_FILE AS (
SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
DST_FILE BLOB;
BEGINshould be rewritten as
-- CREATE THE PROCEDURE TO LOAD THE FILE
CREATE OR REPLACE PROCEDURE LOAD_FILE
AS
SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
DST_FILE BLOB;
BEGIN
...I removed one parenthesis which was not closed.
And for the image_import procedure there is a semikolon missing after the final END.
END*;*
Edited by: Sven W. on Nov 24, 2008 5:54 PM.
Edited by: Sven W. on Nov 24, 2008 5:56 PM
Edited by: Sven W. on Nov 24, 2008 5:59 PM

Can't add mailboxes to gmail but when I try the same procedure with Bell mail I don't get an edit button so can't add any mailboxes.

I have 2 email accounts Gmail and Bell mail. I can add mailboxes to gmail but when I try the same procedure with Bell mail I don't get an edit button so can't add any mailboxes.

Mailboxes can be added only to IMAP accounts. Is Bell setup as IMPAP or POP?

E6-00: what's wrong with Belle refresh (and other ...

I've been following this forum and have always been up-to-date with E6-00 firmware. I've been almost happy with Belle and was expecting hardly the Belle refresh version for the Music player upgrade. What I got was - ? I don't know. Just the new version and no instant visible change. However... :
- the Music Player is the same. Meaning, no song search and still ridiculous user interface
- the phone tries to establish the data connection quite often even if no application is open
- the phone is hardly responsive from time to time (while looking for the network connection)
- the phone does not want to connect to the wifi. Restart helps.
- the phone loses the network operator and does not reconnect. Happened once (when roaming). Restart helps immediately.
- the Microsoft Apps: pursued upgrade. I personally do not need them. The screen is simply to small to use them effectively.
- (not a complaint) the battery life: I think the battery life is not really affected by the OS. Those complaining about shorter battery life should check how much time they spend using the phone, being connected to wifi, etc.
I'm very disappointed with the E6-00. I try to keep it positive but it keeps me down with every (new) issue. Does anyone has advice what to do with upper mentioned issues? I bought the phone ~2 months after it was available. I'm assuming that these first production series can have hardware issues? My phone was on reparation twice: for the notification light (hardware thing) and bluetooth issues (voice not heard over the bluetooth headset). The latter is still present I think...
I consider buying E71 since there's no other good (Nokia) phone on the market. What makes me sad the most is that my iPod touch does wifi connection and other things smoothlessly... But I don't want an iPhone (which is in principle the same as iPod touch), I just want a good Nokia.
Regards,
P

strelamcqueen:
I agree with your post except for the fact that Belle hosed my E6. Meaning: if you look at all my other posts, it's all about the GPS data functions that were awesome with the E71 then went away with the E6 on Anna. At least with Anna, there was an app called LeGPSData2 that restored most of the E71 GPS functionality. LeGPSData2 is not compatible with Belle. Sooo, I am currently using my E6 ONLY because of the decent camera.
Belle made the UI look pretty but that's it. I found the same problems with the responsiveness that you mentioned and issues with not connecting to my home wifi when I try to browse the net at home. There's nothing like downloading a bunch of big files only to discover that I've chewed up a bunch of data because the phone didn't connect to wifi. I put the wifi widget on one of my home screens and I make sure that I manually connect to wifi now before starting the browser. The Microsoft app via the upgrade were a joke. They actually took over Quick Office so that Excel and Word opened with MS Office Mobile. This would be fine but they open so tiny they are unreadable and they are not editable with MS Office Mobile for some reason. I removed the MS apps immediately.
My battery life suffered a lot after Belle refresh. With normal use as before the upgrade I would get home with about 50% battery with 3G ON. With Belle refresh, The battery won't make it through a full day with 3G on and I end up with about 25% battery at the end of the day with 3G off. Good thing I don't use much data through the day!
This is actually my second E6; long story but the first I upgraded to Belle and was disappointed with the loss of LeGPSData2 app. This one I was forced to upgrade to Belle refresh because while updating Ovi Maps one night, the update completely deleted the Ovi Maps app and I could not get it back without updating the OS to Belle refresh.
So I am with you. I too am very disappointed with the E6 but most of my disappointment comes from the software 'upgrades'. If Nokia would just leave well enough alone, all would be fine. I am sorry I have no advice to take care of the problems you and I are facing. I am in search of a new phone now and if I don't downgrade to an E72, I won't be getting a Nokia again. It's a sad story because I have been a die hard Nokia fan for a long time.
DS
@adrianhughes:
HUH? stelamcqueen is asking advice from other USERS. That's what the forum is about.

Angry birds free with Belle update

few days back,i reset my phone by deleting all the data and the angry birds that came free with Belle update on my Nokia 500 also got deleted.how can I get it back.please reply asap.

You should have created a backup of your data before resetting.Now I guess there is no way you can get it back except reinstalling the firmware.
In Love With My C6-01:Now running on Nokia Belle!

Warning: Type created with compilation errors. sql : oracle 11gr2

I'm trying to create a supertype customer service and subtype agent and supervisor, so they can inherent values however when I try to run this in oracle sql: a message comes up
Warning: Type created with compilation errors.
What is wrong with the code below?
Create or replace type customer_s_type as object ( csID number, csName varchar(15), csType number ) NOT FINAL; Create or replace type supervisor_type UNDER customer_s_type ( title varchar (10) ); Create or replace type agent_type UNDER customer_s_type (title varchar (10)); Create table supervisor of supervisor_type ( CONSTRAINT supervisor_PK PRIMARY KEY (csID)); Create table agent of agent_type (CONSTRAINT agent_PK PRIMARY KEY (csID)); create table customer_service( csID number(10), csType number(10), constraint supervisor_pk primary key(csID) );

Wile creating TYPE you need to terminate with a back slash (/) semi colon does not work.
Try like this
create or replace type customer_s_type as object ( csid number, csname varchar(15), cstype number ) not final
create or replace type supervisor_type under customer_s_type ( title varchar (10) )
create or replace type agent_type under customer_s_type (title varchar (10))

Warning: Function created with compilation errors. ???

I created a function with a warning:
Warning: Function created with compilation errors.
I'd like to know more detailed information about this warning, how to find them?
If only with this warning, I don't know how to correct the definition of the function.
BTW, because it is a warning, I just try to run the sql stmt which will call this function:
SQL> select strdiff(ename, 'FOR') from emp;
select strdiff(ename, 'FOR') from emp
ERROR at line 1:
ORA-06575: Package or function STRDIFF is in an invalid state.
/* strdiff is the name of function */
Thanks in advance!

Hi,
I think that your posting may be more suited to the PL/SQL forum.
after the function is created with errors you should try the command:
show err
or
show errors
this should at least give you some idea of what is wrong.
regards Michael

So without warning while surfing with Safari, it will just close? I haven't been able to pin it to a certain action, but it does it regularly . It...

So without warning while surfing with Safari, it will just close? I haven't been able to pin it to a certain action, but it does it regularly .
10 times in last 20 mins Grrrr. updates all up to date.

"...updates all up to date"
Well there you go. There's your mistake. The iOS 8 updates have seriously hosed Safari. Here are your options: (a) you can jump through all kinds of hoops resetting, restoring, reloading, etc. for hours/days, or (b) you can save yourself a lot of aggravation and wait for an update that really "just works".

Firmware Update for my blackberry 8830 world edition with Bell Canada

Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada? I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update. I don't want to update if it is not necessary and not be able to run my blackberry. If I am able to update where would I go to get the 4.5 update?

You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5.

Iphone 6 with IOS 8.0.2 bluetooth broken with RHB430N Radio in 2011 Ram 1500

I got my 64GB Iphone 6 just after release date, paired properly with my RHB430N radio in my 2011 Dodge Ram 1500 and worked great. When the new update of IOS came out 8.0.2, I installed that on my phone. Now the bluetooth is broken with my radio. It seems to pair ok from the radio side but I get a message that the phone cant see the uconnect radio during pairing. When I try and make a call, It wont work through voice activation, if I do get to work, the call stays active for about 5sec on the radio then it shuts off, the phone stays on making the call. Weird!
I tried a factory reset on the radio, as well as network reset on my iphone with no luck. My Iphone 4S i had previously paired and worked fine with IOS 7.1.2
anyone else with the issue? I noticed a few other people with different vehicle makes with the same issue after the 8.0.2 update and like I said it paired and worked fine with IOS 8.0 out of the box.
any fixes or work arounds available meantime?

I got my 6 three days ago (fine device, by the way. Meg St Clair will be proud of me: I finally took the plunge, I who claimed that I would never buy another iPhone, but I'm dithering...), and so far, no issues, none whatsoever, when syncing my phone via USB.
WiFi syncing is another matter, though, because the phone simply doesn't appear in iTunes. I've checked all the right boxes, made sure the phone was set to accept WiFi syncing, to no avail.
I'll look into it this weekend, just in case I missed something.
But I can tell you this: all the content I had backed-up is now back on the phone, nothing's missing. I have a 2006 MacBook Pro running Snow Leppard.

I have two phones, one (4S) with Bell in Canada, the other (5, soon enough) with ATT in the US. Since I spend more time in Canada, I'd rather the 5 up there. Can I swap the sim cards? Neither phone is unlocked.

I have two phones, one (4S) with Bell in Canada, the other (5, soon enough) with ATT in the US. Since I spend more time in Canada, I'd rather the 5 up there. Can I swap the sim cards? Neither phone is unlocked.

iphone 5 will use nanosim instead of microsim so that one won't work
you could check you with carrier to see if they will give you another sim though but I dunno if the ATT 5 will have the right data bands so you might not get LTE or w/e

I want to email some photos, after i click send, a warning window opens with no text. help?

i want to email some photos, after i click send, a warning window opens with no text. help?

No way to help without you actually sharing details
does it involve iPhoto for the Mac in any way? If so how? What version of iPhoto and of the OS? What is the exact error message? What email client do you use with iPhoto?
LN

Warning - Joikuspot broken with Belle

Similar Messages

Maybe you are looking for