WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x8db

Hi
Boot device: /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@w5001517bb2817e11,0:a File and args:
SunOS Release 5.11 Version 11.2 64-bit
Copyright (c) 1983, 2014, Oracle and/or its affiliates. All rights reserved.
WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x8db
WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x911
I have this issue on a T4-2 running Ldom 3.1.
I found this document.
Document 1507514.1 Booting Control Domain Reports "malformed MD, No CPUs Found In Latency Group" Errors
I tried the documented workaround (set-var, rm-var, save config)
After poweroff/poweron the messages are still there.
Any ideas?
Thanks,
Marcel

Hi Eze
Yes, we use SR-IOV and I/O domain
# ldm list-io |grep BUS
NAME                                      TYPE   BUS      DOMAIN   STATUS
pci_0                                     BUS    pci_0    primary IOV
pci_1                                     BUS    pci_1    secondaryIOV
The WARNING message is always displayed at control domain boot.
Fw is at 8.5.0.a since Summer:
-bash-4.1$ vdcfadm -c show_log | grep "Firmware Version changed" |grep s0013
12:02:2014 18:55:51 INFO 11183 config:console_check:check_console(86) Firmware Version changed from 8.2.2.c to 8.4.0.b for Node s0013
02:06:2014 09:17:44 INFO   1156 config:console_check:check_console(86) Firmware Version changed from 8.4.0.b to 8.5.0.a for Node s0013
Solaris Upgrade was as follows:
-bash-4.1$ vdcfadm -c show_log | grep "Updated Patch-Level" | grep s0013
23:10:2014 12:20:48 INFO 10181 pkg:pkg_analyze:(200) Updated Patch-Level for 's0013' from '1.19.0.6.0 (U1.SRU19)' to '2.3.0.5.0 (U2.SRU3)'
20:11:2014 07:31:23 INFO 15836 pkg:pkg_analyze:(200) Updated Patch-Level for 's0013' from '2.3.0.5.0 (U2.SRU3)' to '2.3.0.4.1 (U2.SRU3)'
First message I have is from 6.11.2014. Older logs are lost.
# grep lgrp_minlat_node messages.3 | head -1
Nov 6 19:25:04 s0013 unix: [ID 251664 kern.warning] WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x960
I try to change CPUs later.
Best regards,
Marcel

Similar Messages

Javadoc: warning - Multiple sources of package comments found for package

h1. The Problem
By creating the Maven Site for our software we receive the following error messages:
javadoc: warning - Multiple sources of package comments found for package*
We use maven with maven projects containing multiple maven modules.
We have the same package names used in different modules (e.g. util-api with package util.text and util-impl with package util.text)
Package Info are created using package-info.java files.
We use maven-javadoc-plugin
A search pointed to the following old links:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=5095714
http://forums.sun.com/thread.jspa?forumID=41&threadID=713300
Does anyone experience the same problem? How can it be solved?
h1. Our configuration
$ mvn -version
Apache Maven 2.2.0 (r788681; 2009-06-26 15:04:01+0200)
Java version: 1.6.0_14
Default locale: de_CH, platform encoding: UTF-8
OS name: "linux" version: "2.6.18-92.1.1.el5" arch: "amd64" Family: "unix"
maven-javadoc-plugin version=2.6.1
no special configuration

h1. The Problem
By creating the Maven Site for our software we receive the following error messages:
javadoc: warning - Multiple sources of package comments found for package*
We use maven with maven projects containing multiple maven modules.
We have the same package names used in different modules (e.g. util-api with package util.text and util-impl with package util.text)
Package Info are created using package-info.java files.
We use maven-javadoc-plugin
A search pointed to the following old links:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=5095714
http://forums.sun.com/thread.jspa?forumID=41&threadID=713300
Does anyone experience the same problem? How can it be solved?
h1. Our configuration
$ mvn -version
Apache Maven 2.2.0 (r788681; 2009-06-26 15:04:01+0200)
Java version: 1.6.0_14
Default locale: de_CH, platform encoding: UTF-8
OS name: "linux" version: "2.6.18-92.1.1.el5" arch: "amd64" Family: "unix"
maven-javadoc-plugin version=2.6.1
no special configuration

Benefit Error "No Benefit Plans found for Program Grouping"

Hi Experts,
While running Report for Employee Eligibility RPLBEN01 it through an Error Message
"No Benefit Plans found for Program Grouping 1st/2nd"
I have configured 1st and 2nd Program Grouping and maintained respective features also.
Can any body guide me to clear this issue.
Thanks in Advance.
vnk

check this view V_T5UBU whether you have created the record for you plan against your first program grouping and second program grping

After installation of Mavericks, I get the warning : Apple Qmaster File Agent not found. Any solutions?

Hello,
Everything was great running Mavericks in FCPX and seemingly Compressor... up until I hit the 'submit' button on a project. I found the following thread, which is related, but it doesn't mention Mavericks so I started a new one here. I'm guessing my problem has to do with Mavericks because I was able to export videos fine yesterday before the upgrade. I followed Russ' potential solution in that thread to no avail. The same problem happens whether I try to use the systems cluster or not. Here's the thread:
https://discussions.apple.com/message/23434754#23434754
After trying all of that, I decided to use FCS Remover to remove FCPX, Compressor and QMaster (like I've had to do in the past when something would stop working after an update). I then re-installed everything and opened my Compressor project back up for export. I was expecting it to go through at that point, but alas, the same dreaded warning message appears: "An internal error occurred: Apple Qmaster File Agent not found."
I'm stumped. Don't know what to do besides uninstalling all my pro apps, including QMaster, and reinstalling.
Any ideas?

I set QMaster Preferences for Compressor Services to "Share" = checked and "Managed" = Checked, then I set Instances to 4, it did not work, back to the original error "Qmaster file Agent not found".
Look at some of your information I noticed that in Qmaster Preference the "Advanced" - Network - Use Network Interface: "All Interfaces". So I changed that to "Built-in Ethernet 2" (NIC my cable is plugged into) and set "Enable Port Range: From 50,000 with number of ports 1000".
So, for the heck of it I tried setting Instances to 2 -- and it worked, look in Batch Monitor I see 5 segments, 1 audio and 4 video with 2 out of 4 video transcoding (each was assigned about a 2 min chunk of video). Progress -- ok, so now I set Instances to 3 and submit batch -- it's still working, I get 7 segments 6 video and 1 audio. Ok the big test, setting Instances to 4 and it still works!! 9 segments, 8 video and 1 audio, WoooHoo, its working!
Just to be sure I open up Activity monitor and all 4 of my CPUs were cranking at 95% utilization.
Also checked OS X firewall setting, they are set to most minimal. Checked my router also, 192.168.1.2 is the IP assigned to my MacPro and the router is set to DMZ that specific IP (meaning is basically open to any port).
But I think the KEY in my case was to change the "Use Network Interface" from "All Interfaces" to "Built-in Ethernet 2" and then Enable Port Range from 50,000.
On a side note, the progress bars in Batch Monitor and in Compressor are way off with the "Remaining" time estimates -- overall progress will suddenly jump -- it looks as if the remaining time isn't being divided by the number segments currently running or something?
Thank you for your assistance.
Rob.

Removing warning for "Default CSS file not found."

I am getting this warning in Flash Builder:
"Default CSS file not found."
I can not for the life of me figure out how to get rid of it. Any suggestions?

Default css file can be specified as a compiler option (per SWC, I think).
See http://livedocs.adobe.com/flex/3/html/help.html?content=compilers_14.html
For example, flex framework has a default CSS file: C:\Program Files\Adobe\Adobe Flash Builder 4\sdks\3.5.0\frameworks\projects\framework\default.css
Do you have some library project or a swc with default css file option turned on, but the css file is missing?

Error: Warning Unresponsive script, dom.max_script_run_time : not found

The fix for error: Warning Unresponsive script says goto config page
about:config page, search for the preference dom.max_script_run_time
- this parameter not found on the config page
Please advise
== This happened ==
A few times a week
== always

I have pretty much the same problem -- I run three different types of Browsers (Firefox 3.6; Internet Explorer 6; Chrome) and I've found that they are all affected by this ... thing.
I suspect that there is some kind of war going on, or a very aggressive move by Yahoo onto the Browsers and Search Engine scene. With Yahoo trying to be an 800 lb (Pound weight) Gorilla - again, Yawn!
I this because I've recently installed an AntiVirus application (which is a really good one -- but, unfortunately for the AntiVirus maker they did not look closely enough at who they were getting into bed with -- The 800 Pound Gorilla, Yahoo.
This AntiVirus's installer had a default setting to make Yahoo Search my default search engine -- it was a tiny notice about this and I happened to look otherwise Yahoo would have installed openly onto my computer (and I don't want them. I've been using computers since before the Internet was publicly and generally available and I know only too well Yahoo's Huge Ego and Navel gazing behaviour.
Basically, Mozilla are on Yahoo's side, because -- in the minds of the anarchists of Mozilla -- Google had no right to make a Browser.
This is Mozilla getting its own back on Google and Google Chrome. Mozilla are culpable in this assault on our own property -- our own computers. By two organizations who are bitter at Google. Actually, they are jealous of Google because Google succeeded on the quality and purity of Google products and their terrific business sense and strategy.
Now, Mozilla and Yahoo have got in cahoots (and chumps like the supplier of my AntiVirus have been sucked into this) to "Do something about Google" as Mozilla proclaimed they would do (should they get the chance) some few years ago.
Now, I have in my computer: Yahoo software and a Mozilla Browser which are both acting truly as Malware. Now that AntiVirus company which loaded Yahoo software onto my computer can understand why I wrote to them pointing all this out (and they, a multi-million or billion pound organization missed what tiny little me could see) that they have helped Malware get onto my system -- now their up-to-that-moment very well thought of AntiVirus and organization ... Well, their name is now mud (but I shall not say their name here. Let them suffer their stupidity and shame, that should be enough for them. They are going to have a time of it cleaning this little ol' mess up.)

SM Diagnostics Warning " No landscape element has been found "

Hi All,
I am in the process of setting up the SM Diagnostics on Sol Man 4.0 SP10. I have deployed the LMSERVICE11_0-20001429.SCA file when I login as J2EE_Admin to SM Diagnostics I see the following warning
Warning : <b></b>No landscape element has been found. There might be none or you are not authorized to see any of them.
I am not sure if I can go ahead with SMD wizard before I clear this warning.
Thanks
Sunil

Hello Paula,
I've tried SMDIAG_WIZARD but it also ended with error :
<i>The data could not be passed to the Solution Manager Diagnostics.
Solution Manager Diagnostics error message: <--Localization failed: ResourceBundle='com.sap.engine.services.rfcengine.RFCRes
Procedure
Check the RFC connection and the Solution Manager Diagnostics configuration
</i>
I've checked the RFC connection n found no error. I've also checked SMD config, it looked fine. But, I'm still wondering there is no RFC setting in SMSY for non-ABAP system. any idea ?
Thx n Regards,
Adhi
Message was edited by:
Adhi Wibowo

ITunes deleted apps - still a warning message keeps appearing: 'iTunes has found purchased items on the iPhone..."

Hi
I'm trying to delete apps in iTunes Library and from the iPhone.
1. Goto Library > Apps then I deleted the apps I dont use.
2. Goto the iPhone, select Apps then deleted apps from there that I'm no longer using.
3. Click Sync. Then I get the following warning:
iTunes has found purchased items on the iPhone “4S 16GB iPhone” that are not present in your iTunes library. Do you want to transfer these items from this iPhone back to your iTunes library? If you do not transfer these purchased items to your iTunes library, they will be removed from the iPhone.
4. I clicked 'Dont Transfer'. This is fine as I dont want the apps on the iPhone anymore.
5. I ejected the iPhone.
6. Later, I reconnect the iPhone again to iTunes. The warning appears again:
iTunes has found purchased items on the iPhone “4S 16GB iPhone” that are not present in your iTunes library. Do you want to transfer these items from this iPhone back to your iTunes library? If you do not transfer these purchased items to your iTunes library, they will be removed from the iPhone.
7. Clicked 'Dont Transfer'.
8. Then I tried 'Transfer'. This transfered "something" .. I dont know what transferred as I had deleted a few apps.
Why does this warning keep appearing everytime I reconnect? I'm not sure what it means or what it's meant to do.
Please can you advise me? I dont know what I'm doing wrong.

Don't transfer, right click the device in iTunes and select Back Up.
Though, the iTunes interface is designed to be computer - phone and not the other way around, you may need to use something else to preserve your data.

A Warning about malformed URI

I got this warning after running some code through HTML Tidy.
Can anyone tell me what it means. The page validates ok but I would
still like to know if this is something I need to fix.
Thanks
Martin

Change this:
<div id="intro"><img id="bestvalue"
src="../siteimages/FlashLocal.png"
To this:
<div id="intro"><img id="bestvalue"
src="../siteimages/FlashLocal.png">
Nancy O.
Alt-Web Design & Publishing
www.alt-web.com

Creator dies without warning due to "Child tree not found."

*********** Exception occurred ************ at 6:09 PM on Apr 14, 2006
Annotation: Exception occurred in Request Processor
java.lang.IllegalArgumentException: Child tree not found.
at org.netbeans.modules.javacore.parser.ASTProvider.findTree(ASTProvider.java:264)
at org.netbeans.modules.javacore.parser.ASTProvider.findTree(ASTProvider.java:260)
at org.netbeans.modules.javacore.parser.ASTProvider.findTree(ASTProvider.java:260)
at org.netbeans.modules.javacore.parser.ElementInfo.refreshASTree(ElementInfo.java:80)
at org.netbeans.modules.javacore.jmiimpl.javamodel.MetadataElement.getASTree(MetadataElement.java:961)
at org.netbeans.modules.javacore.jmiimpl.javamodel.MetadataElement.getASTree(MetadataElement.java:451)
at org.netbeans.modules.javacore.jmiimpl.javamodel.ResourceImpl.cachePositions(ResourceImpl.java:491)
at org.netbeans.modules.javacore.jmiimpl.javamodel.ResourceImpl.getFeaturePosition(ResourceImpl.java:479)
at org.netbeans.modules.javacore.jmiimpl.javamodel.FeatureImpl.getPosition(FeatureImpl.java:271)
at org.netbeans.modules.javacore.JMManager.getElementPosition(JMManager.java:704)
at org.netbeans.modules.javacore.JMManager.getElementPosition(JMManager.java:690)
at org.netbeans.modules.java.OverrideAnnotation$Descriptor.getLine(OverrideAnnotation.java:157)
at org.netbeans.modules.java.OverrideAnnotation.updateLine(OverrideAnnotation.java:64)
at org.netbeans.modules.java.OverrideAnnotationSupport$1.run(OverrideAnnotationSupport.java:148)
at org.netbeans.editor.BaseDocument.render(BaseDocument.java:1033)
at org.netbeans.modules.java.OverrideAnnotationSupport.processOverriddenAnnotation(OverrideAnnotationSupport.java:155)
at org.netbeans.modules.java.OverrideAnnotationSupport.processOverriddenAnnotationImpl(OverrideAnnotationSupport.java:179)
at org.netbeans.modules.java.OverrideAnnotationSupport.access$400(OverrideAnnotationSupport.java:44)
at org.netbeans.modules.java.OverrideAnnotationSupport$Request.computeAnnotations(OverrideAnnotationSupport.java:418)
at org.netbeans.modules.java.OverrideAnnotationSupport$Request.run(OverrideAnnotationSupport.java:402)
at org.openide.util.Task.run(Task.java:189)
at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:330)
[catch] at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:721)
*********** Exception occurred ************ at 6:09 PM on Apr 14, 2006
Annotation: Exception occurred in Request Processor
java.lang.IllegalArgumentException: Child tree not found.
at org.netbeans.modules.javacore.parser.ASTProvider.findTree(ASTProvider.java:264)
at org.netbeans.modules.javacore.parser.ElementInfo.refreshASTree(ElementInfo.java:80)
at org.netbeans.modules.javacore.jmiimpl.javamodel.MetadataElement.getASTree(MetadataElement.java:961)
at org.netbeans.modules.javacore.jmiimpl.javamodel.MetadataElement.getASTree(MetadataElement.java:451)
at org.netbeans.modules.javacore.jmiimpl.javamodel.ResourceImpl.cachePositions(ResourceImpl.java:491)
at org.netbeans.modules.javacore.jmiimpl.javamodel.ResourceImpl.getFeaturePosition(ResourceImpl.java:479)
at org.netbeans.modules.javacore.jmiimpl.javamodel.FeatureImpl.getPosition(FeatureImpl.java:271)
at org.netbeans.modules.javacore.JMManager.getElementPosition(JMManager.java:704)
at org.netbeans.modules.javacore.JMManager.getElementPosition(JMManager.java:690)
at org.netbeans.modules.java.OverrideAnnotation$Descriptor.getLine(OverrideAnnotation.java:157)
at org.netbeans.modules.java.OverrideAnnotation.updateLine(OverrideAnnotation.java:64)
at org.netbeans.modules.java.OverrideAnnotationSupport$1.run(OverrideAnnotationSupport.java:148)
at org.netbeans.editor.BaseDocument.render(BaseDocument.java:1033)
at org.netbeans.modules.java.OverrideAnnotationSupport.processOverriddenAnnotation(OverrideAnnotationSupport.java:155)
at org.netbeans.modules.java.OverrideAnnotationSupport.processOverriddenAnnotationImpl(OverrideAnnotationSupport.java:179)
at org.netbeans.modules.java.OverrideAnnotationSupport.access$400(OverrideAnnotationSupport.java:44)
at org.netbeans.modules.java.OverrideAnnotationSupport$Request.computeAnnotations(OverrideAnnotationSupport.java:418)
at org.netbeans.modules.java.OverrideAnnotationSupport$Request.run(OverrideAnnotationSupport.java:402)
at org.openide.util.Task.run(Task.java:189)
at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:330)
[catch] at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:721)

Hi There,
Please provide more information as to when this behaviour occurs,
Does it happen everytime or just ocassinally?
What are you doing when this happens?
Also which OS are you on?
K

Error : Syntax check form not found in function group program

Hi All,
I have a function group ZMRMK. In its source code the function-pool SAPLZMRMK contains error
"Form XYZ does not exits"
There is an include in SAPLZMRMK named lzmrmkf01 : in this include there is an include lmrmkf02 . Here XYZ is called->
perform XYZ.
The form XYZ is written in LMRMKF16 and this include is in function pool SAPLMRMK.
Kindly suggest how to remove this error.

Hi
Yes you do
But It seems many standard includes are missing in the Z-function group: perhaps this function group was created in another system or in another release?
It's strange many includes are missing, this is a typical upgrade problem:
A standard function group was copied, but only some components were copied, so the function group use Z-include and standard ones, now in the new system "old standard includes" calls new routine defined in new include, used in standard function group, but not in Z-function group.
If it's so, you need to put the missing include manually
Max

Determining Where Hits Were Found (XML Section Groups)

Hello all,
Hoping for a bit of help. It's my first time posting here, but I've benefitted from reading a lot of your posts. I have created a single Oracle Text index for a resume database of sorts. It utilizes a user datastore. The procedure I use gathers a a single user's information in my database and organizes it via XML tags that are assigned in the procedure - outputs a CLOB. I did this in order to try the AUTO SECTION GROUP option when indexing, so that I could use the WITHIN operator.
So, for example, the procedure is given the rowid for a single employee, and the output may be:
<ALL>
<PERSONAL>
83019
John Smith
10/05/1973
Baltimore, MD
</PERSONAL>
<SKILLS>
Oracle Database Administrator
.NET Developer
</SKILLS>
</ALL>
My problem is I wish to know the SPECIFIC section groups where hits were registered if I search all of the XML
SELECT EMPLOYEE_ID
FROM EMPLOYEE_TBL
WHERE CONTAINS (DUMMY_COLUMN, 'developer WITHIN ALL', 1) > 0
ORDER BY SCORE (1) DESC
My output is:
EMPLOYEE_ID
83019
Is there any way I can also list the sections where hits were registered for this user? In this example, I'd want the "SKILLS" section to show up in the result set.

skMed,
Yes, that is a problem. Alternatives are the first method using UNION ALL or creating a MATERIALIZED VIEW and indexing that, similar to what I demonstrated to the other poster on this thread, or CTX_DOC.HIGHLIGHT as Roger said. I have provided a demonstration of the problem below, followed by an alternative solution that uses CTX_DOC.HIGHLIGHT as Roger suggested. I used a function but Roger may have a more elegant method.
SCOTT@orcl_11g> CREATE TABLE employee_tbl
2    (employee_id NUMBER,
3      fname          VARCHAR2 (7),
4      lname          VARCHAR2 (7),
5      dob          DATE,
6      city          VARCHAR2 (9),
7      state          VARCHAR2 (2),
8      dummy_column VARCHAR2 (1),
9      CONSTRAINT emp_id_pk PRIMARY KEY (employee_id))
10 /
Table created.
SCOTT@orcl_11g> CREATE TABLE skills
2    (employee_id NUMBER,
3      skill          VARCHAR2 (30),
4      CONSTRAINT skills_id_fk FOREIGN KEY (employee_id) REFERENCES employee_tbl (employee_id))
5 /
Table created.
SCOTT@orcl_11g> CREATE TABLE jobs
2    (employee_id NUMBER,
3      job          VARCHAR2 (30),
4      CONSTRAINT job_id_fk FOREIGN KEY (employee_id) REFERENCES employee_tbl (employee_id))
5 /
Table created.
SCOTT@orcl_11g> BEGIN
2    INSERT INTO employee_tbl VALUES
3       (1, 'Adam', NULL, NULL, NULL, NULL, NULL);
4    INSERT INTO employee_tbl VALUES
5       (2, 'Bob', NULL, NULL, NULL, NULL, NULL);
6    INSERT INTO employee_tbl VALUES
7       (3, 'Charles', NULL, NULL, NULL, NULL, NULL);
8    INSERT INTO employee_tbl VALUES
9       (4, 'David', NULL, NULL, NULL, NULL, NULL);
10    INSERT INTO skills VALUES (1, 'OTHERS');
11    INSERT INTO skills VALUES (2, '.NET');
12    INSERT INTO skills VALUES (3, 'OTHERS');
13    INSERT INTO skills VALUES (4, '.NET');
14    INSERT INTO jobs   VALUES (1, '.NET');
15    INSERT INTO jobs   VALUES (2, 'OTHERS');
16    INSERT INTO jobs   VALUES (3, '.NET');
17    INSERT INTO jobs   VALUES (4, '.NET');
18 END;
19 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> CREATE OR REPLACE PROCEDURE resume
2    (p_rowid IN     ROWID,
3      p_clob     IN OUT CLOB)
4 AS
5 BEGIN
6    FOR e IN
7       (SELECT employee_id,
8            employee_id || ' ' || fname || ' ' || lname || ' ' || dob || ' '
9            || city || ',     ' || state AS personal
10        FROM      employee_tbl
11        WHERE ROWID = p_rowid)
12    LOOP
13       DBMS_LOB.WRITEAPPEND (p_clob, 10, '<PERSONAL>');
14       DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (e.personal), e.personal);
15       DBMS_LOB.WRITEAPPEND (p_clob, 11, '</PERSONAL>');
16       DBMS_LOB.WRITEAPPEND (p_clob, 8, '<SKILLS>');
17       FOR s IN (SELECT skill FROM skills WHERE employee_id = e.employee_id) LOOP
18         DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (s.skill) + 1, s.skill || ' ');
19       END LOOP;
20       DBMS_LOB.WRITEAPPEND (p_clob, 9, '</SKILLS>');
21       DBMS_LOB.WRITEAPPEND (p_clob, 12, '<JOBHISTORY>');
22       FOR j IN (SELECT job FROM jobs WHERE employee_id = e.employee_id) LOOP
23         DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (j.job) + 1, j.job || ' ');
24       END LOOP;
25       DBMS_LOB.WRITEAPPEND (p_clob, 13, '</JOBHISTORY>');
26    END LOOP;
27 END resume;
28 /
Procedure created.
SCOTT@orcl_11g> SHOW ERRORS
No errors.
SCOTT@orcl_11g> BEGIN
2    CTX_DDL.CREATE_PREFERENCE ('your_datastore', 'USER_DATASTORE');
3    CTX_DDL.SET_ATTRIBUTE ('your_datastore', 'PROCEDURE', 'resume');
4    CTX_DDL.CREATE_SECTION_GROUP ('your_sec_group', 'XML_SECTION_GROUP');
5    CTX_DDL.ADD_FIELD_SECTION ('your_sec_group', 'PERSONAL', '<PERSONAL>', TRUE);
6    CTX_DDL.ADD_FIELD_SECTION ('your_sec_group', 'SKILLS', '<SKILLS>', TRUE);
7    CTX_DDL.ADD_FIELD_SECTION ('your_sec_group', 'JOBHISTORY', '<JOBHISTORY>', TRUE);
8 END;
9 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> CREATE INDEX resume_idx ON employee_tbl (dummy_column)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS
4    ('DATASTORE     your_datastore
5       SECTION GROUP     your_sec_group
6       STOPLIST     CTXSYS.EMPTY_STOPLIST')
7 /
Index created.
SCOTT@orcl_11g> CREATE OR REPLACE FUNCTION list_element
2    (p_string     VARCHAR2,
3      p_element    INTEGER,
4      p_separator VARCHAR2 DEFAULT ':')
5    RETURN          VARCHAR2
6 AS
7    v_string      VARCHAR2 (32767);
8 BEGIN
9    v_string := p_separator || p_string || p_separator;
10    v_string := SUBSTR (v_string, INSTR (v_string, p_separator, 1, p_element) + LENGTH (p_separator));
11    RETURN SUBSTR (v_string, 1, INSTR (v_string, p_separator) - 1);
12 END list_element;
13 /
Function created.
SCOTT@orcl_11g> SELECT * FROM employee_tbl ORDER BY employee_id
2 /
EMPLOYEE_ID FNAME   LNAME   DOB       CITY      ST D
          1 Adam
          2 Bob
          3 Charles
          4 David
SCOTT@orcl_11g> SELECT * FROM skills ORDER BY employee_id
2 /
EMPLOYEE_ID SKILL
          1 OTHERS
          2 .NET
          3 OTHERS
          4 .NET
SCOTT@orcl_11g> SELECT * FROM jobs ORDER BY employee_id
2 /
EMPLOYEE_ID JOB
          1 .NET
          2 OTHERS
          3 .NET
          4 .NET
SCOTT@orcl_11g> COLUMN ixv_value    FORMAT A26
SCOTT@orcl_11g> COLUMN from_section FORMAT A15
SCOTT@orcl_11g> SELECT ixv_value,
2          list_element (ixv_value, 1) AS from_section,
3          TO_NUMBER (list_element (ixv_value, 3)) AS token_type
4 FROM   ctx_user_index_values
5 WHERE ixv_index_name = 'RESUME_IDX'
6 AND    ixv_class = 'SECTION_GROUP'
7 /
IXV_VALUE                  FROM_SECTION     TOKEN_TYPE
SKILLS:SKILLS:17:Y         SKILLS                   17
PERSONAL:PERSONAL:16:Y     PERSONAL                 16
JOBHISTORY:JOBHISTORY:18:Y JOBHISTORY               18
SCOTT@orcl_11g> COLUMN token_info FORMAT A30 WORD_WRAPPED
SCOTT@orcl_11g> SELECT token_text, token_type, token_first, token_last, token_count
2 FROM   dr$resume_idx$i
3 WHERE token_text = 'NET'
4 /
TOKEN_TEXT       TOKEN_TYPE TOKEN_FIRST TOKEN_LAST TOKEN_COUNT
NET                       0           1          4           4
NET                      17           2          4           2
NET                      18           1          4           3
SCOTT@orcl_11g> -- problem:
SCOTT@orcl_11g> SELECT t.employee_id, t.fname,
2          SCORE (1),
3          list_element (v.ixv_value, 1) AS from_section
4 FROM   employee_tbl t, dr$resume_idx$i i, dr$resume_idx$k k, ctx_user_index_values v
5 WHERE CONTAINS (t.dummy_column, '.NET%', 1) > 0
6 AND    i.token_text = 'NET'
7 AND    i.token_type = TO_NUMBER (list_element (v.ixv_value, 3))
8 AND    k.docid BETWEEN i.token_first AND i.token_last
9 AND    k.textkey = t.ROWID
10 ORDER BY t.employee_id
11 /
EMPLOYEE_ID FNAME     SCORE(1) FROM_SECTION
          1 Adam             3 JOBHISTORY
          2 Bob              3 JOBHISTORY
          2 Bob              3 SKILLS
          3 Charles          3 SKILLS
          3 Charles          3 JOBHISTORY
          4 David            6 JOBHISTORY
          4 David            6 SKILLS
7 rows selected.
SCOTT@orcl_11g> -- alternative solution:
SCOTT@orcl_11g> CREATE OR REPLACE FUNCTION from_section
2    (p_emp_id IN VARCHAR2,
3      p_text      IN VARCHAR2,
4      p_rowid IN ROWID)
5    RETURN VARCHAR2
6 AS
7      hightab   ctx_doc.highlight_tab;
8      v_clob       CLOB;
9      v_clob2   CLOB;
10      v_section VARCHAR2 (32767);
11      v_result VARCHAR2 (32767);
12 BEGIN
13    CTX_DOC.HIGHLIGHT ('resume_idx', p_emp_id, p_text, hightab, FALSE);
14    DBMS_LOB.CREATETEMPORARY (v_clob, TRUE);
15    DBMS_LOB.CREATETEMPORARY (v_clob2, TRUE);
16    resume (p_rowid, v_clob);
17    FOR i IN 1 .. hightab.COUNT LOOP
18       v_clob2 := SUBSTR (v_clob, 1, hightab(i).offset);
19       v_clob2 := SUBSTR (v_clob2, 1, INSTR (v_clob2, '>', -1) - 1);
20       v_section := SUBSTR (v_clob2, INSTR (v_clob2, '<', -1) + 1);
21       v_result := v_result || ',' || v_section;
22    END LOOP;
23    DBMS_LOB.FREETEMPORARY (v_clob);
24    DBMS_LOB.FREETEMPORARY (v_clob2);
25    RETURN LTRIM (v_result, ',');
26 END from_section;
27 /
Function created.
SCOTT@orcl_11g> SHOW ERRORS
No errors.
SCOTT@orcl_11g> COLUMN from_section FORMAT A60 WORD_WRAPPED
SCOTT@orcl_11g> SELECT t.employee_id, t.fname, SCORE (1),
2          from_section (employee_id, '.NET%', ROWID) AS from_section
3 FROM   employee_tbl t
4 WHERE CONTAINS (t.dummy_column, '.NET%', 1) > 0
5 ORDER BY t.employee_id
6 /
EMPLOYEE_ID FNAME     SCORE(1) FROM_SECTION
          1 Adam             3 JOBHISTORY
          2 Bob              3 SKILLS
          3 Charles          3 JOBHISTORY
          4 David            6 SKILLS,JOBHISTORY
SCOTT@orcl_11g>

Non Tempo-Event Found Warning

I'm hanging on by a learning curve thread as I score a film. Made to 59 minutes out 77, and ****..now I get this Warning Window saying: "Non Tempo-Event found in Sync Reference." I've tried to look it up in the Logic Reference Manual and here in the Logic Pro 7 discussions, but didn't find anything. Does anyone how this happened and how I could correct.
Any help is appreciated.

Last night I had it working great. And then this morning I wake up and load the project and now I get that warning window, AND the film audio is out of synch with the film by about 2 mintues by the end, it seems to have happened after this one section in the middle where I tried to change the tempo in the tempo bar above from 110 to 132 and then back to 110 after it, in playback I get another warning that says "Error while trying to synchronize Audio and MIDI." In the past I did try a beat mapping to figure out the tempo of this same audio section so that I could set it correctly to put some loops in at the right tempo. Now everything is screwed up.
Is there another place to ask these technical discussion questions, it seems that this discussion area is a lot less active than the Final Cut Pro area. Any other websites?
I appreciate it.

Malformed clamav database

Clamav error listed below generated every 2 or 3 seconds.
Apr 19 16:18:11 bni org.clamav.clamd[64556]: LibClamAV Warning: **************************************************
Apr 19 16:18:11 bni org.clamav.clamd[64556]: LibClamAV Warning: *** The virus database is older than 7 days! ***
Apr 19 16:18:11 bni org.clamav.clamd[64556]: LibClamAV Warning: ***   Please update it as soon as possible.    ***
Apr 19 16:18:11 bni org.clamav.clamd[64556]: LibClamAV Warning: **************************************************
Apr 19 16:18:11 bni org.clamav.clamd[64556]: LibClamAV Error: cli_loadinfo: Digital signature not found
Apr 19 16:18:11 bni org.clamav.clamd[64556]: LibClamAV Error: Can't load daily.info: Malformed database
Apr 19 16:18:11 bni org.clamav.clamd[64556]: LibClamAV Error: cli_tgzload: Can't load daily.info
Apr 19 16:18:11 bni org.clamav.clamd[64556]: LibClamAV Error: Can't load /var/clamav/daily.cvd: Malformed database
Apr 19 16:18:11 bni org.clamav.clamd[64556]: ERROR: Malformed database
Apr 19 16:18:11 bni com.apple.launchd[1] (org.clamav.clamd[64556]): Exited with exit code: 1
Apr 19 16:18:11 bni com.apple.launchd[1] (org.clamav.clamd): Throttling respawn: Will start in 10 seconds
Apr 19 16:18:13 bni jabberd/c2s[333]: [7] [::ffff:192.168.0.241, port=64398] connect
Apr 19 16:18:13 bni jabberd/c2s[333]: SASL callback for non-existing host: bni.private
Apr 19 16:18:13 bni jabberd/c2s[333]: [7] [::ffff:192.168.0.241, port=64398] disconnect jid=unbound, packets: 0
Apr 19 16:18:15 bni com.apple.wikid.mailinglists[64557]: mail:status = "list-updated"
Apr 19 16:18:16 bni jabberd/c2s[333]: [7] [::ffff:192.168.0.241, port=64399] connect
Apr 19 16:18:16 bni jabberd/c2s[333]: SASL callback for non-existing host: bni.private
Apr 19 16:18:16 bni jabberd/c2s[333]: [7] [::ffff:192.168.0.241, port=64399] disconnect jid=unbound, packets: 0
Apr 19 16:18:19 bni jabberd/c2s[333]: [7] [::ffff:192.168.0.241, port=64402] connect
Apr 19 16:18:19 bni jabberd/c2s[333]: SASL callback for non-existing host: bni.private
Apr 19 16:18:19 bni jabberd/c2s[333]: [7] [::ffff:192.168.0.241, port=64402] disconnect jid=unbound, packets: 0
Any thoughts to correct would be appreciated.
JB

JB - today, I have been disecting this issue at hand. Here's my fix
The noise from the Console (process restarting every few seconds, a good reason, but poor messages on how to fix or what is the real issues!):
Console
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          LibClamAV Warning: **************************************************
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          LibClamAV Warning: *** The virus database is older than 7 days! ***
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          LibClamAV Warning: ***   Please update it as soon as possible.    ***
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          LibClamAV Warning: **************************************************
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          LibClamAV Error: cli_loadinfo: Digital signature not found
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          LibClamAV Error: Can't load daily.info: Malformed database
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          LibClamAV Error: cli_tgzload: Can't load daily.info
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          LibClamAV Error: Can't load /var/clamav/daily.cvd: Malformed database
9/11/11 11:37:36 AM          org.clamav.clamd[1623]          ERROR: Malformed database
9/11/11 11:37:36 AM          com.apple.launchd[1]          (org.clamav.clamd[1623]) Exited with exit code: 1
9/11/11 11:37:36 AM          com.apple.launchd[1]          (org.clamav.clamd) Throttling respawn: Will start in 10 seconds
9/11/11 11:37:46 AM          org.clamav.clamd[1626]          LibClamAV Warning: ***********************************************************
9/11/11 11:37:46 AM          org.clamav.clamd[1626]          LibClamAV Warning: *** This version of the ClamAV engine is outdated.     ***
9/11/11 11:37:46 AM          org.clamav.clamd[1626]          LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
9/11/11 11:37:46 AM          org.clamav.clamd[1626]          LibClamAV Warning: ***********************************************************
9/11/11 11:37:47 AM          org.clamav.clamd[1626]          LibClamAV Warning: ***********************************************************
9/11/11 11:37:47 AM          org.clamav.clamd[1626]          LibClamAV Warning: *** This version of the ClamAV engine is outdated.     ***
9/11/11 11:37:47 AM          org.clamav.clamd[1626]          LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
9/11/11 11:37:47 AM          org.clamav.clamd[1626]          LibClamAV Warning: ***********************************************************
Console - quiet now - haha   for a few minutes
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Limits: Global size limit set to 104857600 bytes.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Limits: File size limit set to 26214400 bytes.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Limits: Recursion level limit set to 16.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Limits: Files limit set to 10000.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Archive support enabled.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Algorithmic detection enabled.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Portable Executable support enabled.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          ELF support enabled.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Mail files support enabled.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          OLE2 support enabled.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          PDF support enabled.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          HTML support enabled.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Self checking every 600 seconds.
9/11/11 11:37:53 AM          org.clamav.clamd[1626]          Set stacksize to 1048576
Fixed by running:    freshclam
Run Program: Terminal Window -> type: sudo freshclam
mac-001:~ ladmin$ sudo su
Password:
sh-3.2# freshclam
ClamAV update process started at Sun Sep 11 11:36:53 2011
Downloading main-52.cdiff [100%]
Downloading main-53.cdiff [100%]
main.cld updated (version: 53, sigs: 846214, f-level: 53, builder: sven)
WARNING: getfile: daily-9451.cdiff not found on remote server (IP: 200.236.31.1)
WARNING: getpatch: Can't download daily-9451.cdiff from database.clamav.net
WARNING: getfile: daily-9451.cdiff not found on remote server (IP: 208.72.56.53)
WARNING: getpatch: Can't download daily-9451.cdiff from database.clamav.net
WARNING: getfile: daily-9451.cdiff not found on remote server (IP: 69.12.162.28)
WARNING: getpatch: Can't download daily-9451.cdiff from database.clamav.net
WARNING: Incremental update failed, trying to download daily.cvd
Downloading daily.cvd [100%]
[LibClamAV] ***********************************************************
[LibClamAV] *** This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
daily.cvd updated (version: 13600, sigs: 190348, f-level: 60, builder: guitar)
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Current functionality level = 58, recommended = 60
DON'T PANIC! Read http://www.clamav.net/support/faq
Downloading bytecode.cvd [100%]
[LibClamAV] ***********************************************************
[LibClamAV] *** This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
bytecode.cvd updated (version: 144, sigs: 41, f-level: 60, builder: edwin)
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Current functionality level = 58, recommended = 60
DON'T PANIC! Read http://www.clamav.net/support/faq
Database updated (1036603 signatures) from database.clamav.net (IP: 150.214.142.197)
sh-3.2#
Back to Console Log
so after 10 minutes I get this now
9/11/11 11:47:53 AM          org.clamav.clamd[1626]          No stats for Database check - forcing reload
9/11/11 11:47:53 AM          org.clamav.clamd[1626]          Reading databases from /var/clamav
9/11/11 11:47:53 AM          org.clamav.clamd[1626]          LibClamAV Warning: ***********************************************************
9/11/11 11:47:53 AM          org.clamav.clamd[1626]          LibClamAV Warning: *** This version of the ClamAV engine is outdated.     ***
9/11/11 11:47:53 AM          org.clamav.clamd[1626]          LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
9/11/11 11:47:53 AM          org.clamav.clamd[1626]          LibClamAV Warning: ***********************************************************
9/11/11 11:47:54 AM          org.clamav.clamd[1626]          LibClamAV Warning: ***********************************************************
9/11/11 11:47:54 AM          org.clamav.clamd[1626]          LibClamAV Warning: *** This version of the ClamAV engine is outdated.     ***
9/11/11 11:47:54 AM          org.clamav.clamd[1626]          LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
9/11/11 11:47:54 AM          org.clamav.clamd[1626]          LibClamAV Warning: ***********************************************************
9/11/11 11:48:00 AM          org.clamav.clamd[1626]          Database correctly reloaded (1035192 signatures)
What Steps did I take and what versions do I have now on my Mac Server Snow 10.6.8 ?
This is what I did:
1. downloaded the Mark's Version (latest one)
2. downloaded & Installed the Calav - apple open source site to get latest "Engine"
Oh, you can reload the entire ClamAv on your Mac Server by the Apple Open Source Site:
http://www.apple.com/opensource/
clamav
clamav
0.97
Server
3. downloaded the stable version of Mark's "ClamXav" using the base 'Clamav' from apple standard.
   http://www.clamxav.com/download.php
4. Installed Mark's current version. See Settings for new folder to quarantine.
okay, to be continued...
Best Regards,
TJ

Sun-Java-System-SMTP-Warning

Customers using our company's products have been finding the following error message when sending messages with image attachments from our devices:
"Sun-Java-System-SMTP-Warning: Lines longer than SMTP allows found and truncated"
RFC 2045 - Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies http://www.faqs.org/rfcs/rfc2045.html
states:
(5)   Encoded lines must not be longer than 76 characters,
          not counting the trailing CRLF. If longer lines are
          found in incoming, encoded data, a robust
          implementation might nevertheless decode the lines, and
          might report the erroneous encoding to the user.Our devices comply with this RFC to the letter.
Can anyone explain why the Sun Java System SMTP server is rejecting these messages?
If necessary, I can provide network capture files from the connection between our device and an SMTP server.
A sample successful SMTP connection with a Postfix SMTP server follows:
220 doc.doc.pixord.com ESMTP Postfix
EHLO pixord.com
250-doc.doc.pixord.com
250-PIPELINING
250-SIZE 20480000
250-VRFY
250-ETRN
250 8BITMIME
MAIL FROM:
250 Ok
RCPT TO:
250 Ok
DATA
354 End data with <CR><LF>.<CR><LF>
from:
to:
subject: This is just test.
date: Thu, 05 May 2005 08:10:09 +0800
MIME-Version: 1.0
Content-Type: multipart/mixed;
.boundary="--=_iMaIl_BoUnDrY_1"
----=_iMaIl_BoUnDrY_1
Content-Type: text/plain;
This is just a test.
----=_iMaIl_BoUnDrY_1
Content-Type: image/jpeg;
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
.filename="test.jpg"
/9j/2wCEABALDA4MChAODQ4SERATGCgaGBYWGDEjJR0oOjM9PDkzODdASFxOQERXRTc4UG1RV19i
Z2hnPk1xeXBkeFxlZ2MBERISGBUYLxoaL2NCOEJjY2NjY2NjY2NjY2NjY2NjY2NjY2NjY2NjY2Nj
Y2NjY2NjY2NjY2NjY2NjY2NjY2NjY//EAaIAAAEFAQEBAQEBAAAAAAAAAAABAgMEBQYHCAkKCwEA
----SNIPPED BY ME----
Skz7VZIFMKj0oAgJHoaaSPepyi+lNMYoAhOPWm8eoqYximmP3oA//9k=
----=_iMaIl_BoUnDrY_1--
250 Ok: queued as 5AC3815763F
RSET
250 Ok
QUIT
221 ByeMIME message was snipped by me in order to shorten the message.
I also removed the E-mail addresses.

I'm sorry.
1. The max line length is 998 characters, plus cr/lf
2. If you're getting the error message, then whatever that message was composed with is broken, and emitting lines longer than that.
Messaging Server has configurable choices. By default, it simply truncates the lines. You can choose to "wrap" them.
See channel keyword, "wrapsmtp"

WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x8db

Similar Messages

Maybe you are looking for