Warning message about CMP problem when launching query - how to suppress?

Dear Experts
How can I suppress warning message that did not stop the query from running?
I encounter this message when 1st launching it. The next run , it does not show. But if user run it i think may still show. How to suppress it?
The message is :
=================
Characteristic [Z_I_NN_FN]Application Sub Grou of the MultiProvider is not provided by the PartProvider ZC_00N; this means it is not identified. However, [Z_I_NN_FN]Application Sub Grou is compounded to 0COMP_CODE and 0COMP_CODE is identified with characteristic Z_I_MM_FM for InfoProvider ZC_006.
In this case, there is a compounding or CMP problem with [Z_I_NN_FN]Application Sub Grou in the MultiProvider for PartProvider ZC_006.
Processing characteristics with CMP problems in the data manager is very complicated and can have a negative impact on performance. The data manager cannot use SIDs for these characteristics (at least not in the corresponding InfoProvider) because the initial SID = 0 for [Z_I_NN_FN]Application Sub Grou is not the same as the initial compound key for 0COMP_CODE [Z_I_NN_FN]Application Sub Grou (that is, when real values are posted in ZC_006 for 0COMP_CODE).
For this reason, hierarchies for [Z_I_NN_FN]Application Sub Grou must often be read at leaf level. Furthermore, it is not possible to use hierarchy aggregates for [Z_I_NN_FN]Application Sub Grou or for the remaining InfoProviders.
System Response
Where possible, the system tries to avoid negative impacts on performance. Unfortunately, such performance issues cannot be avoided if the correct results are to be displayed.
Procedure
When working with important MultiProviders, you should always avoid characteristics with CMP problems.
====================
Please advise how to address CMP problem error message when launching query.
regards
Pascal

Hi Pascal,
Why dont you select those compounding objects in Multiprovider itself.As far as i understand while activating the MP it throws an error if compounding objects are not selected.
One more thing to add which i noticed you can try running the query on analyzer if you are running it on RSRT.
You can see the data even if MP is not active on analyzer but not on RSRT.
Hope it helps.
Regards,
AL

Similar Messages

Warning message about ClassNotFoundException in a new web project

- Eclipse 3.3M6
- Web Tools Platform 2.0M6
Hello, everybody!
I created a Dynamic Web Project using JSF and JPA, but I'm getting the following
warning message in the Problems view:
Classpath entry org.eclipse.jdt.USER_LIBRARY/Biblioteca JPA will not be exported or published. Runtime ClassNotFoundExceptions may result.
This user library, Biblioteca JPA, is composed of this jars:
antlr-2.7.6.jar
cglib.jar
dom4j.jar
ejb3-persistence.jar
hibernate3.jar
hibernate-annotations.jar
hibernate-entitymanager.jar
sqljdbc.jar
jboss-hibernate.jar
In the project I also have these libraries:
Biblioteca JSF:
commons-collections.jar
jstl.jar
myfaces-api.jar
myfaces-impl.jar
JBoss v4.0:
jboss-j2ee.jar
jbossall-client.jar
javax.servlet.jar
javax.servlet.jsp.jar
activation.jar
mail.jar
So, I would like to know how do I configure the Bliblioteca JPA to disable possible
problems with ClassNotFoundExceptions happening at runtime. What do I have to add or
change on it to get rid of the warning message? Or whatever is the solution that you
use when this message appear.
Thank you in advance.
Marcos

Hi Deepa,
>As there is no way where we can upload images directly
Please provide a link to support this statement.
And, of course, you can upload images. Have a look [here|Re: Visual composer 7.1 upload the image](at your own thread!)
Regards,
Vani V

I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?

I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?

If you don't get an answer here, ask in the forums devoted to MS stuff:
http://answers.microsoft.com/en-us/mac/forum/macexcel

After upgrading to Mavericks on my Mac Pro, mail always requires that I type in my password when launching. How do I change that?

After upgrading to Mavericks on my Mac Pro, mail always requires that I type in my password when launching. How do I change that?

If your password is accepted, and Mail connects to the account, but you're prompted for the password repeatedly, take each of the following steps that you haven't already tried. Note: these steps don't apply if the server rejects the password. That's a different problem.
Step 1
When prompted for the password, check the box marked Remember this password in my keychain.
Step 2
Check that the keychain is working.
Step 3
Check that the default keychain is unlocked.

Firefox displays warning message about an SSL site

When I connect to an SSL site, sometimes firefox displayes a warning message and I can select add exception. When I click on "I understand the risk" and then "view certificate", it says no need to add exception. It actually shows the EV SSL Cert green bar. Why is the firefox showing the error in first place. I do use host file entry for the SSL site. This does not happen all the time. Sometimes, the page with the green bar is shown properly. This is a big problem as once you enter some information and submit, the warning may come back again and page is then not shown.

How did Firefox showed that warning?
Was the a pop-up on a sliding bar at the top of the browser page or a message on the web page?
Do you remember any content of that message?
Was it about a certificate (secure connection)?
Rename the file "permissions.sqlite" to permissions.sqlite.sav in the Firefox Profile Folder to remove all exceptions (cookies, images, pop-ups, software).
If renaming didn't help then you can undo and rename the file permissions.sqlite.sav to permissions.sqlite to get back the old exceptions.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
Please update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates"
The Firefox Firefox/4.0.1 version that you currently run is no longer supported with security updates.
*http://en.wikipedia.org/wiki/Vulnerability_(computing)
*http://www.mozilla.org/security/known-vulnerabilities/
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html

I;m no longer able to use the Penn State ANGEL system (I teach on line) for my email and intead get messages about "script" problems.

Question
I'm no longer able to use the Penn State ANGEL system (I teach on line) for my email and instead get messages about "script" problems

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problem when activating Query from Business Content

Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- Kit

Hi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh

Warning message about CSS style

Hi, there
I'm experiencing a problem. I've checked FLEX 2 livedoc and
found out all styles I defined in an external css files are
supported style. However, the warning message "CSS type selectors
are not supported in components" appeared when I run my
application. Does any one know how I can resolve it?
Thanks in advance
David

Hi, Peter
The warning message is like following:
"Warning /webContent/view/Login.mxml:-1
CSS type selectors are not supported in components."
I've found the warning message will disappear if I remove the
following css code:
"ScrollBar {
trackColors: #E4ECF3, #FFFFFF;
fillColors: #FFFFFF, #E4ECF3;
borderColor: #BAD0E4;
themeColor: #D8E3ED;
cornerRadius: 0;
ComboBox {
fillColors: #E4ECF3, #FFFFFF;
rollOverColor: #FCEEC5;
selectionColor: #FFE38C;
cornerRadius:0;
themeColor:#FFE38C;
fontWeight: normal;
CheckBox{
borderStyle: none;
borderThickness: 1;
themeColor:#8AA9CE;
I don't know why, and could you help me to solve it?
Thanks in advance
David

Warning message on log off when application is running

How can I make a warning message when a user is trying to logoff windows while an application made with labview is still running ?
I want to pop something that ask the user if he's sure he wants to quit.
thanks

I was working on just this issue today. Here is a vi (in 7.1.1) and an exe showing it. The exe has been renamed to a .llb to get around some attachment restrictions, so rename it (after scanning with you antivirus of choice!). I can make it in 8.0 if needed (don't currently have 8.2 installed)
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Attachments:
shutdown.vi ‏31 KB
shutdown.llb ‏62 KB

Problem when exporting Query from Web template to Excel Sheet.

Hello,
Im encoutering a problem when im trying to export query output from web template to excel sheet.
A popup windown appears when excel sheet opens which reads.."problem cameup in the following areas during load : Cell Value".The report layout appears to be fine but the totals shows unwanted values starting with * followed by number.
Any valuable inputs, what could be the problem. where can i rectify the same.
Regards
Ellora

Hello A K,
Thanks for ur time and response but the option u mentioned did not serve my purpose.
The problem seems to be only with pirticular cells.As mentioned earlier the layout appears properly..all the values are seen..but the end result..totals are disturbed.
eg: If the report shows in template the total value :20,668,554...when exported the values is shown as **668553.88000000600000.
So what could be the problem ? any template setting ? global setting to look at ?
Regards
Ellora

Warning Message in Sales Order when Sales price less than Cost Price

HI
Generally when we raise a sales order if Sales price is less than that of Cost price , System will provide us a warning message inside the sales order screen. Now , this is not coming. Is there any settings in the configuration to get this warnin message. Please help us on the above
Regards
Anis

There is no configuration is available for this from functional side.
Try with User Exit MV45AFZZ , for this Co ordinate with your ABAPer.
Regards,
Ramesh

Warning message should be raised when user changes Business Area in MIRO.

Hello all,
My requirement is,
When in MIRO transaction, in details tab the BA (Business Area) comes from PO line items. When user changes this Business Area to some other value then the system should raise a warning message and continue with the transaction. It happens in MRHR transaction in 4.6. Now we are on ECC6.0 and user wants this functionality.
So is there any configuration to be done or so I need to write User Exit?
Please explain in details like where to make these config settings and all.
Thanks in advance.

Hi Harshal,
Make use of EXIT_SAPLMRMP_010 in Enchancement LMR1M001 User exits in Logistics Invoice Verification.
Raise your warning message by validating GSBER present in structure in exit's FM : EXIT_SAPLMRMP_010
hope this helps.
Regds,
abhee

Warning message, if Quantity=0, when creating a sales order with VA01orVA02

Hi Experts,
Currently, if the user do not enters any value in QUANTITY field, while creating a sales order(or even VA02 too) ..........we are getting a Warning message(VU001).
So, I need to change it to hard error message type, am changing the message type, but, its not reflecting, and still its throwing a warning message(VU001)!!
Let me know that, What is the correct user exit to incorporate my changes?
From where this message generating? am keeping a watch point with this message (VU001), but, its not stopping!!
System is ECC 6.0
repliaes appreciated
thanq
Edited by: SAP ABAPer on Dec 22, 2008 4:38 PM

thanq
(the reason, why my original code was worked is that, I put my code in SAVE user exit!!)
yes, its working, but, the scaenrio is different, so, its like,
if the user entered my_matnr with quantity = 0,
then presses ENTER,
now, we are getting a WARNING MESSAGE of message class & # is VU001, saying the Item 000010 is quantity 0...........so, here I need to change it to HARD ERROR message.
So, as soon as press the ENTER button(after enetring 0 qty matnr)........I need to get HARD error message, so, where should I incorporate the changes? is it MOVE FIELD TO VBAP user exit?
thanq

Warning message about Rx power high on Catalyst 4900M

We get the following warning messages in the log on our 4900M:
Dec 12 09:21:37.367 EST: %SFF8472-5-THRESHOLD_VIOLATION: Te3/8: Rx power low warning; Operating value: -12.1 dBm, Threshold value: -9.9 dBm.
Dec 12 09:31:37.537 EST: %SFF8472-5-THRESHOLD_VIOLATION: Te3/8: Rx power low warning; Operating value: -12.1 dBm, Threshold value: -9.9 dBm.
the 4900M is connected to a 3560E at port Te0/2. No violations are reported on the 3560E.
We have already replaced modules on both the 4900M and the 3560E. We also replaced the fiber patch cables, and moved the patch cables to connect to a backup set of fiber cables.
Additional logs:
4900M#show interfaces transceiver module 3
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Tx Power Rx Power
Port (Celsius) (Volts) (dBm) (dBm)
Te3/5 33.2 0.00 -2.1 -3.1
Te3/6 31.9 0.00 -1.6 -3.0
Te3/7 30.3 3.22 -2.3 -2.4
Te3/8 29.7 3.23 -2.2 -12.1
3560E#show interfaces transceiver module 1
Transceiver monitoring is disabled for all interfaces.
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Current Tx Power Rx Power
Port (Celsius) (Volts) (mA) (dBm) (dBm)
Te0/1 32.0 0.00 8.1 -2.1 -2.0
Te0/2 31.2 0.00 1.2 -2.6 -3.9
We are unsure what else the issue could be. Any ideas would be appreciated.

Can you provide more detail as to what is in the link between the 4900M and the 3560E?
4900M --- patch cord --- bulkhead panel ---- ? backbone cable ? ---- bulkhead panel --- patch cord --- 3560E
Do you know if there are any other connectors or splices in the network? How many fibers are in the backbone cable? Which transceiver are you using?

Warning message box pops up when opening Flash CC in Flash CS6

See attached image.
Is there a way to get rip off the message? I had turn off all warning box under Preferences > Warnings, it still poping up!
Thx.

If any Flash CC file is opened Flash CS6, a warning message would appear. Unfortunately, there's no way to disable this alert unless you re-save your file in Flash CS6 once.

Warning message about CMP problem when launching query - how to suppress?

Similar Messages

Maybe you are looking for