Warning message about Rx power high on Catalyst 4900M

We get the following warning messages in the log on our 4900M:
Dec 12 09:21:37.367 EST: %SFF8472-5-THRESHOLD_VIOLATION: Te3/8: Rx power low warning; Operating value: -12.1 dBm, Threshold value: -9.9 dBm.
Dec 12 09:31:37.537 EST: %SFF8472-5-THRESHOLD_VIOLATION: Te3/8: Rx power low warning; Operating value: -12.1 dBm, Threshold value: -9.9 dBm.
the 4900M is connected to a 3560E at port Te0/2. No violations are reported on the 3560E.
We have already replaced modules on both the 4900M and the 3560E. We also replaced the fiber patch cables, and moved the patch cables to connect to a backup set of fiber cables.
Additional logs:
4900M#show interfaces transceiver module 3
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Tx Power Rx Power
Port (Celsius) (Volts) (dBm) (dBm)
Te3/5 33.2 0.00 -2.1 -3.1
Te3/6 31.9 0.00 -1.6 -3.0
Te3/7 30.3 3.22 -2.3 -2.4
Te3/8 29.7 3.23 -2.2 -12.1
3560E#show interfaces transceiver module 1
Transceiver monitoring is disabled for all interfaces.
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Current Tx Power Rx Power
Port (Celsius) (Volts) (mA) (dBm) (dBm)
Te0/1 32.0 0.00 8.1 -2.1 -2.0
Te0/2 31.2 0.00 1.2 -2.6 -3.9
We are unsure what else the issue could be. Any ideas would be appreciated.

Can you provide more detail as to what is in the link between the 4900M and the 3560E?
4900M --- patch cord --- bulkhead panel ---- ? backbone cable ? ---- bulkhead panel --- patch cord --- 3560E
Do you know if there are any other connectors or splices in the network? How many fibers are in the backbone cable? Which transceiver are you using?

Similar Messages

Warning message about Rx power high on Catalyst 4500E

Hi,
The following messages are logged in the irregular on Catalyst 4500E Supervisor Engine 7-E.
Are these fiber links required the attenuators?
%SFF8472-5-THRESHOLD_VIOLATION: Te2/6: Rx power high warning; Operating value:   0.5 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te3/6: Rx power high warning; Operating value:   0.9 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te2/6: Rx power high warning; Operating value:   0.6 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te3/6: Rx power high warning; Operating value:   0.9 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te2/6: Rx power high warning; Operating value:   0.6 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te3/6: Rx power high warning; Operating value:   0.9 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te2/6: Rx power high warning; Operating value:   0.6 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te3/6: Rx power high warning; Operating value:   0.8 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te2/6: Rx power high warning; Operating value:   0.5 dBm, Threshold value:   0.4 dBm.
%SFF8472-5-THRESHOLD_VIOLATION: Te3/6: Rx power high warning; Operating value:   0.9 dBm, Threshold value:   0.4 dBm.
Thank you for your cooperation in advance.
-------- Additional Logs Start --------
Cat45E+Sup7E#show interfaces Te2/6 | inc media type
Full-duplex, 10Gb/s, link type is auto, media type is 10GBase-LR
Cat45E+Sup7E#show interfaces Te3/6 | inc media type
Full-duplex, 10Gb/s, link type is auto, media type is 10GBase-LR
Cat45E+Sup7E#show interfaces transceiver module 2
Load for five secs: 5%/1%; one minute: 6%; five minutes: 6%
Time source is NTP, 13:29:28.720 JST Tue Feb 19 2013
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
                                 Optical   Optical
           Temperature Voltage Tx Power Rx Power
Port       (Celsius)    (Volts) (dBm)     (dBm)
Te2/1        35.6       3.26      -1.6      -0.2
Te2/2        37.0       3.26      -1.7      -0.3
Te2/3        35.1       3.27      -2.6      -2.2
Te2/4        36.7       3.28      -2.5      -2.5
Te2/5        35.6       3.25      -1.3      -0.9
Te2/6        35.0       3.26      -1.7       0.6
Te2/7        36.1       3.28      -2.4      -2.8
Te2/8        35.1       3.28      -2.4      -3.0
Te2/9        33.1       3.23      -2.4      -2.4
Te2/10       32.2       3.32      -2.1      -3.0
Te2/11       35.0       3.25      -2.5      -2.9
Cat45E+Sup7E#show interfaces transceiver module 3
Load for five secs: 6%/2%; one minute: 6%; five minutes: 6%
Time source is NTP, 13:29:44.348 JST Tue Feb 19 2013
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
                                 Optical   Optical
           Temperature Voltage Tx Power Rx Power
Port       (Celsius)    (Volts) (dBm)     (dBm)
Te3/1        36.2       3.26      -2.1       0.2
Te3/2        35.6       3.26      -1.7      -0.6
Te3/3        36.8       3.26      -2.4      -3.4
Te3/4        36.8       3.28      -2.5      -2.6
Te3/5        35.2       3.26      -1.3       0.0
Te3/6        36.2       3.26      -1.1       0.9
Te3/7        34.2       3.28      -2.4      -2.8
Te3/8        34.0       3.29      -2.0      -3.1
Te3/9        35.4       3.28      -2.5      -2.3
Te3/10       32.5       3.24      -2.4      -4.2
Te3/11       34.2       3.28      -2.4      -3.2
Cat45E+Sup7E#show interfaces transceiver threshold-table
Load for five secs: 7%/3%; one minute: 6%; five minutes: 6%
Time source is NTP, 13:29:52.304 JST Tue Feb 19 2013
              Optical Tx     Optical Rx    Temp     Laser Bias    Voltage
                                                    current
10GE LR SFP+
Min1            -12.20        -18.40        -5            N/A          3.00
Min2             -8.20        -14.40        0             N/A          3.10
Max2              0.50          0.50        70            N/A          3.50
Max1              3.50          3.50        75            N/A          3.60
-------- Additional Logs End --------

Hello Marivin.
I am configured new WS-C4500X-32 switches for distribution layer and server aggreation WS-C3650-48TQ-E with these model.
I am geetting below error message. I read your document but i ham getting here low alaram, i have observed because of this i am loosing connectiy with my neibhor device and ehter channel is flapping.
Kindly help me to fix this....
*Jan 28 23:54:04.417: %SFF8472-5-THRESHOLD_VIOLATION: Te1/29: Rx power low alarm; Operating value: -16.4 dBm, Threshold value: -13.9 dBm.
*Jan 28 23:54:07.317: %SFF8472-5-THRESHOLD_VIOLATION: Te1/31: Rx power low warning; Operating value: -10.5 dBm, Threshold value: -9.9 dBm.
*Jan 28 23:54:07.417: %SFF8472-5-THRESHOLD_VIOLATION: Te1/32: Rx power low warning; Operating value: -11.4 dBm, Threshold value: -9.9 dBm.

I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?

I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?

If you don't get an answer here, ask in the forums devoted to MS stuff:
http://answers.microsoft.com/en-us/mac/forum/macexcel

Firefox displays warning message about an SSL site

When I connect to an SSL site, sometimes firefox displayes a warning message and I can select add exception. When I click on "I understand the risk" and then "view certificate", it says no need to add exception. It actually shows the EV SSL Cert green bar. Why is the firefox showing the error in first place. I do use host file entry for the SSL site. This does not happen all the time. Sometimes, the page with the green bar is shown properly. This is a big problem as once you enter some information and submit, the warning may come back again and page is then not shown.

How did Firefox showed that warning?
Was the a pop-up on a sliding bar at the top of the browser page or a message on the web page?
Do you remember any content of that message?
Was it about a certificate (secure connection)?
Rename the file "permissions.sqlite" to permissions.sqlite.sav in the Firefox Profile Folder to remove all exceptions (cookies, images, pop-ups, software).
If renaming didn't help then you can undo and rename the file permissions.sqlite.sav to permissions.sqlite to get back the old exceptions.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
Please update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates"
The Firefox Firefox/4.0.1 version that you currently run is no longer supported with security updates.
*http://en.wikipedia.org/wiki/Vulnerability_(computing)
*http://www.mozilla.org/security/known-vulnerabilities/
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html

Warning message about CMP problem when launching query - how to suppress?

Dear Experts
How can I suppress warning message that did not stop the query from running?
I encounter this message when 1st launching it. The next run , it does not show. But if user run it i think may still show. How to suppress it?
The message is :
=================
Characteristic [Z_I_NN_FN]Application Sub Grou of the MultiProvider is not provided by the PartProvider ZC_00N; this means it is not identified. However, [Z_I_NN_FN]Application Sub Grou is compounded to 0COMP_CODE and 0COMP_CODE is identified with characteristic Z_I_MM_FM for InfoProvider ZC_006.
In this case, there is a compounding or CMP problem with [Z_I_NN_FN]Application Sub Grou in the MultiProvider for PartProvider ZC_006.
Processing characteristics with CMP problems in the data manager is very complicated and can have a negative impact on performance. The data manager cannot use SIDs for these characteristics (at least not in the corresponding InfoProvider) because the initial SID = 0 for [Z_I_NN_FN]Application Sub Grou is not the same as the initial compound key for 0COMP_CODE [Z_I_NN_FN]Application Sub Grou (that is, when real values are posted in ZC_006 for 0COMP_CODE).
For this reason, hierarchies for [Z_I_NN_FN]Application Sub Grou must often be read at leaf level. Furthermore, it is not possible to use hierarchy aggregates for [Z_I_NN_FN]Application Sub Grou or for the remaining InfoProviders.
System Response
Where possible, the system tries to avoid negative impacts on performance. Unfortunately, such performance issues cannot be avoided if the correct results are to be displayed.
Procedure
When working with important MultiProviders, you should always avoid characteristics with CMP problems.
====================
Please advise how to address CMP problem error message when launching query.
regards
Pascal

Hi Pascal,
Why dont you select those compounding objects in Multiprovider itself.As far as i understand while activating the MP it throws an error if compounding objects are not selected.
One more thing to add which i noticed you can try running the query on analyzer if you are running it on RSRT.
You can see the data even if MP is not active on analyzer but not on RSRT.
Hope it helps.
Regards,
AL

Warning message about ClassNotFoundException in a new web project

- Eclipse 3.3M6
- Web Tools Platform 2.0M6
Hello, everybody!
I created a Dynamic Web Project using JSF and JPA, but I'm getting the following
warning message in the Problems view:
Classpath entry org.eclipse.jdt.USER_LIBRARY/Biblioteca JPA will not be exported or published. Runtime ClassNotFoundExceptions may result.
This user library, Biblioteca JPA, is composed of this jars:
antlr-2.7.6.jar
cglib.jar
dom4j.jar
ejb3-persistence.jar
hibernate3.jar
hibernate-annotations.jar
hibernate-entitymanager.jar
sqljdbc.jar
jboss-hibernate.jar
In the project I also have these libraries:
Biblioteca JSF:
commons-collections.jar
jstl.jar
myfaces-api.jar
myfaces-impl.jar
JBoss v4.0:
jboss-j2ee.jar
jbossall-client.jar
javax.servlet.jar
javax.servlet.jsp.jar
activation.jar
mail.jar
So, I would like to know how do I configure the Bliblioteca JPA to disable possible
problems with ClassNotFoundExceptions happening at runtime. What do I have to add or
change on it to get rid of the warning message? Or whatever is the solution that you
use when this message appear.
Thank you in advance.
Marcos

Hi Deepa,
>As there is no way where we can upload images directly
Please provide a link to support this statement.
And, of course, you can upload images. Have a look [here|Re: Visual composer 7.1 upload the image](at your own thread!)
Regards,
Vani V

Keep getting warning message about my Computers Hostname, any solutions please?

This is the Warning Message that keeps appearing every so often.
This computer’s local hostname “Basil-9.local” is already in use on this network. The name has been changed to “Basil-10.local”.

Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. Disconnect the Ethernet cable or turn off Wi-Fi.
Sometimes it happens because a device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
Rename the computer in the Sharing preference pane.

Warning message about CSS style

Hi, there
I'm experiencing a problem. I've checked FLEX 2 livedoc and
found out all styles I defined in an external css files are
supported style. However, the warning message "CSS type selectors
are not supported in components" appeared when I run my
application. Does any one know how I can resolve it?
Thanks in advance
David

Hi, Peter
The warning message is like following:
"Warning /webContent/view/Login.mxml:-1
CSS type selectors are not supported in components."
I've found the warning message will disappear if I remove the
following css code:
"ScrollBar {
trackColors: #E4ECF3, #FFFFFF;
fillColors: #FFFFFF, #E4ECF3;
borderColor: #BAD0E4;
themeColor: #D8E3ED;
cornerRadius: 0;
ComboBox {
fillColors: #E4ECF3, #FFFFFF;
rollOverColor: #FCEEC5;
selectionColor: #FFE38C;
cornerRadius:0;
themeColor:#FFE38C;
fontWeight: normal;
CheckBox{
borderStyle: none;
borderThickness: 1;
themeColor:#8AA9CE;
I don't know why, and could you help me to solve it?
Thanks in advance
David

Warning message about non XA connection factory

Hi,
I'm using 10.0 MP2 and deployed an MDB which uses TransactionManagementType.CONTAINER with TransactionAttributeType.NOT_SUPPORTED. As I don't need a transaction I am referencing a non XA Connection Factory.
I am seeing this message in the logs..
<04-Nov-2010 10:29:54 o'clock GMT> <Warning> <JMSPool> <BEA-169817> <The JMS connection factory resource localconnFactory declared in the EJB "WLPooledSonicJmsTransactionNotSupportedMessageDrivenBean" as part of application "sampleejbs-ear-0" does not support XA. It cannot be used inside a transaction context.>
Can I safely ignore this warning?
Thanks
Mandy

As long as you do not use it inside a transaction, you do not have to worry.

Warning message about a multi-touch device

It's just two weeks old. Whenever I boot up, there's a warning in the Event Viewer as follows:
"A multi-touch device reported inconsistent contact information."
The Event ID is 264.
Does this mean that the screen is defective? I've googled but can't find any solution. If the problem is not solved can I claim for a replacement under warranty?
Any help would be appreciated.

Hello @fantin,
I understand you are getting an error related to your touchscreen on your computer that you have only had for 2 weeks. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. As this is a new unit you want to ensure that not only is it working correctly, but that any issues are properly documented and dealt with properly and immediately.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I try to use the brush tool and paint white but the only color working is grey! I got a warning message about graphics hardware, but everything seems to be fine with the graphics. What is wrong?

I get this message...but everything seems to be fine with the graphics hardware....help!?

The message is referring to 3D features which are not supported by cards with less than 512 MB of vRam.
Try Restore Preferences:
Windows - CTRL-SHIFT-ALT immediately after you double-click the PS icon.
Macintosh - CMD-SHIFT-OPTION immediately after you double-click the PS icon.
Nancy O.

Warning message about cache

Every time I start up Bridge I get the message "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."
This "problem" doesn't seem to cause any dificulties for me in working with bridge, but I would like to get rid of the message. However I can't find any file called "central cache" to purge -- I presume purge means drag to the trash -- and I don't see any place called "Cache Preferences" where it might be located. Does anyone have any suggestions?

Glad it worked for u Peter.
all adobe appliations has option to delete cache files in preferences..it helps in deleting them periodically.

CET: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Rx power high warning; Operating value: -0.9 dBm, Threshold value: -1.0 dBm.

Hei
we have some switches that are connected with our nexus switches via SFP-10GLR. all switches are ok but only one is getting warnings in the logs saying: CET: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Rx power high warning; Operating value: -0.9 dBm, Threshold value: -1.0 dBm.
all the SFP,s are same in alle switches.

%SFF8472-5-THRESHOLD_VIOLATION Vs SFF8472-5-THRESHOLD_VIOLATION.
The first one is printed for the ports that are configured, but not connected/active.
You can avoid such error messages simply shutting down unused ports.
The latter indicates that there is a real threshold violation.
For more details on these error messages, check out.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1/XE_330SG/system/messages/emsg.html#wp1634341
Action Plan:
========
Can you please try clearing the interface counters, so that we can notice the frequency of errors.
Also I researched on the logs that we are observing on our device and have seen cases where the issue has been resolved by physically removing and reinserting transceiver.
Please refer below link for more details:
http://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi?action=search&counter=0&paging=5&links=reference&index=all&query=SFF8472-5-THRESHOLD_VIOLATION

Warning Message - Tracknumber of CEvLaunch too high! Help?

Hi there
I am attempting to import a midi file I found online into GarageBand 09 but I get the following pop up
*Beta-only warning message - not to be localized:*
*Tracknumber of CEvLaunch too high!*
I'm not really too sure what this means? Does it maybe mean the volume is too high? Or there are too many tracks for Garageband to cope with?
When I click OK a few times on the pop up it then pops up
*Launch Event without associated track found!*
*Changed to track 1.*
I then have only 3 tracks for this song when I know there are many more.
I want to be able to hear and use all of the tracks form this midi file in GarageBand 09.
FYI when I play the midi file with Quicktime 7 it sounds fine, with all the tracks being audible.
Can anyone help?
Thanks!

I have a way around this message popping up (but would still like to know why this error appears).
I downloaded this free program
*Midi File Editor 2.01*
Available here
http://mac.softpedia.com/progDownload/Midi-File-Editor-Download-71782.html
Opened the file, and then saved it as a new name.
Imported it to GarageBand and it worked with no errors (although the instruments are way off)
Its a very old feeling program Midi File Editor 2.01, but hey, it worked!
Yay!

Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart,

Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart, something to do with a Panic report?
Thanks
Brian

Hi mende1,
you asked me to post the Kernal panic report then next time it appears, sorry for the delay but it was fine until yesterday when it happened again so here it is, hope you can make sense of this, thank you for your help.
Regards
Brian
Interval Since Last Panic Report: 97797 sec
Panics Since Last Report:          1
Anonymous UUID:                    17D8F909-09A9-4BC6-A153-A12F75529506
Sun Jan 27 09:32:57 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff80002b4b31, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000800a9118, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0xffffff80008c2028, RBX: 0x00000000800a9100, RCX: 0xffffff800ae5bf00, RDX: 0x0000000000000080
RSP: 0xffffff8078713e68, RBP: 0xffffff8078713eb0, RSI: 0x000000005aefd876, RDI: 0x00000000800a9118
R8: 0x0000000000000010, R9: 0x0000000000000000, R10: 0xfffffe802662d000, R11: 0x00080000000263f3
R12: 0xffffff8078713f60, R13: 0xffffff8078713f78, R14: 0x0000000000000000, R15: 0x00000000800a9118
RFL: 0x0000000000010002, RIP: 0xffffff80002b4b31, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000000800a9118, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8078713b10 : 0xffffff8000220792
0xffffff8078713b90 : 0xffffff80002c4794
0xffffff8078713d40 : 0xffffff80002da55d
0xffffff8078713d60 : 0xffffff80002b4b31
0xffffff8078713eb0 : 0xffffff80002352a5
0xffffff8078713ec0 : 0xffffff800036489d
0xffffff8078713ee0 : 0xffffff8000345031
0xffffff8078713fb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 1750251829240
last loaded kext at 51464252613: com.apple.filesystems.msdosfs          1.7.1 (addr 0xffffff7f815c7000, size 57344)
last unloaded kext at 215848970782: com.apple.driver.AppleFileSystemDriver          13 (addr 0xffffff7f825c2000, size 12288)
loaded kexts:
com.vmware.kext.vmnet          3.0.0
com.vmware.kext.vmioplug          3.0.0
com.vmware.kext.vmci          3.0.0
com.vmware.kext.vmx86          3.0.0
com.apple.filesystems.msdosfs          1.7.1
com.apple.driver.AppleBluetoothMultitouch          70.12
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.GeForce          7.3.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleIRController          312
com.apple.driver.AppleUSBCardReader          3.0.6
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.nvenet          2.0.17
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AirPort.Atheros40          505.67.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleUSBOHCI          5.1.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          160.7
com.apple.driver.AppleHIDKeyboard          160.7
com.apple.driver.AppleMultitouchDriver          231.4
com.apple.driver.IOBluetoothHIDDriver          4.0.8f17
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.nvidia.nv50hal          7.3.2
com.apple.NVDAResman          7.3.2
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
com.apple.iokit.IOUSBMassStorageClass          3.0.3
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.8
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0x24300000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: hub_device, 0x0409 (NEC Corporation), 0x0059, 0x26400000 / 2
USB Device: Tablet, 0x172f, 0x0037, 0x26410000 / 6
USB Device: Mass Storage Device, 0x058f (Alcor Micro, Corp.), 0x6362, 0x26430000 / 5
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0x26440000 / 4
USB Device: JumpDrive, 0x05dc (Lexar Media, Inc.), 0xa205, 0x26441000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 4

Warning message about Rx power high on Catalyst 4900M

Similar Messages

Maybe you are looking for