Warning message :Assignment of appointment rules to rule ID incorrect

Hi ,
In solution manager service desk :
I am getting a warning message Assignment of appointment rules to rule ID incorrect when trying to edit the calling hours by pressing the Calling hour s Button in Control Tab.
I have checked with some of the other BP's available in system and they are responding good to edit, for calling hours.
Only few BP's have this warning message coming up.
Can you please suggest some solution for this issue.
Thanks
Siva

Hi,
Seems it is due to inconsistency with rule ID.
can you paste this query in CRM forum. there you may get some answers to fix this.
Thanks,
Jansi

Similar Messages

  • Warning message assignment to accounts

    Hi
    Is it possible to assign warning messages to some certain accounts or is it always the way that warning messages are related to all accounts. I have tried se91 but did not find a solution. Where you can handle these messages and is it even possible to assign them to accounts??
    BR
    Jaakko

    This thread is in wrong forum. Sorry about that. I have resolved this by assigning messages to users.

  • Warning message in IT0021

    Hi experts,
    When i create, change or display the record in IT0021with any subtype, it shows warning message "Assignment to feature P0021 did not take place ", what does it mean? what will happen if i ignore this message? where it will going to effect?
    How to handle this warning message?
    Kindly guide me in this..

    Hi,
    pls check the feature P0021 is configured against country grouping 40 and required subtypes.
    The subtypes 1 (Spouse), 2 (Child), and 10 (Divorced spouse) are supported
    now save and activate the same CTRL+F3.
    regards,
    puja
    Edited by: pujapushap on Mar 5, 2012 7:09 AM

  • Warning Messages in BPEL to Business rules

    Hi ,
    On Compilation i am receiving the following warning .. Canany one advice me why am i receiving the below warning messages .
    Project: C:\Documents and Settings\600674748\Desktop\BusinessRules\BusinessRules\BusinessRules.jpr
    C:\Documents and Settings\600674748\Desktop\BusinessRules\BusinessRules\BPELProcess2.componentType
    Warning: property "partnerLink.MLCBusniessRulesDictionary1.MLCBusniessRulesDictionary1_DecisionService.DecisionService" may not be understood by BPEL component BPELProcess2 - it will likely be ignored.
    Warning: property "partnerLink.MLCBusniessRulesDictionary1.MLCBusniessRulesDictionary1_DecisionService.wsdlRuntimeLocation" may not be understood by BPEL component BPELProcess2 - it will likely be ignored.
    Warning: property "partnerLink.MLCBusniessRulesDictionary1.MLCBusniessRulesDictionary1_DecisionService.decisionServiceDetails" may not be understood by BPEL component BPELProcess2 - it will likely be ignored.
    Warning: property "partnerLink.MLCBusniessRulesDictionary1.MLCBusniessRulesDictionary1_DecisionService.optSoapShortcut" may not be understood by BPEL component BPELProcess2 - it will likely be ignored.
    Regards ,
    Naga

    Hi Naga,
    How did you resolve this.
    Thanks,
    Ravi

  • How to post own message to monitor RSMON from transfer rules

    I'd like to post descriptions for errorneous (for business process, not for R/3) data which drop package by setting ABORT <> 0 or RETURNCODE <> 0.
    How can i do this in start routine for transfer rules and in transfer rules themselves?
    I tryed RSSM_MON_WRITE_MONITOR_IC and RSAL_LOG_WRITE. But really this messages don't appear in monitor. The most i achive is to show message during "sumulate transfer" using RSSM_MON_WRITE_MONITOR_IC.
    And another thing, that I don't want to create my own message class and messages, Just to post text as error. Is that possible?

    Hi,
    I had given wrong answer.
    Appending lines to MONITOR is only poosible when we want to create logs for wrong data at the time of Update Rules.
    Here You will create a routine for an info object.And then you check some condition .If it is not satisfying you will add lines to MONITOR. Here you donot require to declare it. It is already declared in Program RS_ROUTINE.This program will be included for each routine of upadte rule.
    In the similar mannner, you will add lines to G_T_ERRORLOG , in transfer routine,if want to give error message at the time of transfer rule. Here you donot require to declare it. It is already declared in Program RS_ROUTINE.This program will be included for each routine of Transfer rule.
    With rgds,
    Anil Kumar Sharma .P

  • Problem while changing data for STO Assign Delivery type and checking rule

    Hi All,
    In Set up STO..... executing Assign delivery type and checking rule.
    I am trying to add values to Rule for Adoption of ATP Results in Purchasing(REVFE),Delivery Type for Stock Transfers Within a Company Code(LFART1) and another two more fields..After entering the data When i clik Save button... it shows "Data was Saved".But its not showing when i went back and come
    I have checked in debugg mode and table T161V table ..waht ever i entered its not saved in Database table.
    We have checked in another system its working fine..
    Can anyone please help me  on this?

    Solved by posting in OSS.
    The below include has to be uncommented.
    While doing upgrade this include  L0ME6F00 has commented INCLUDE L0ME6F99 has uncommented
         view related include-files   (never change, please)        *
    *{   REPLACE        CB2K900006                                        2
      INCLUDE L0ME6F00.      " subprograms

  • Enter a true account assignment object with revenues - WARNING MESSAGE

    Hi All Experts,
    I am configuring PCA. Where my GL balances are not getting updated with having assignment of Profit Center. I am getting this below warning message :
    Enter a true account assignment object with revenues
    Message no. KI166
    Diagnosis
    You made an account assignment for 410000, a revenue element, in controlling area 8000 to a cost center or profit center.
    System Response
    Cost centers and profit centers can carry revenues in the SAP system as statistics only. To ensure reconciliation between FI and CO for revenue element 410000, a CO account assignment object must record the revenues as a real value. This object type is used for updating to the reconciliation ledger.
    In principle, it is possible for the SAP system to automatically derive this CO account assignment object, the reconciliation object. However, all postings made in CO for costing-based Profitability Analysis are logged in the reconciliation ledger under "reconciliation object". In this manner, the reconciliation ledger identifies the exact values flowing into the operating profit. If you post reconciliation objects during revenue postings to cost centers or profit centers, you must do so while keeping the interpretation of the reconciliation ledger reports in mind. The sums of revenue postings to profitability segments, cost centers, and profit centers cannot be broken down further.
    Procedure
    To avoid posting to reconciliation objects, make account assignments to a real CO account assignment object.
    If you want to post to reconciliation objects, you can change this message to a warning or a note for future users, or deactivate the message entirely. Use the Implementation Guide under "Controlling: General" and choose Change message control. Enter area KI and message number 166. If you do not enter an individual user here, the change is valid for all users.
    I dont understand when I am giving PC as CO Object assignment which is I think true assignment for revenue collecting over. Still system showing this warning message. I know this can be supressed by just pressing ENTER and I can save. By posting  in this way document even , I am not able to draw any report based on PC, neither KE5Z or F.01. All says No data found.
    What configuration piece I am missing ? Can any expert guide ?
    Regards,
    Revati Joshi.

    Just go to OKB9 and check the Cost Element, whether any default cost center or Profitability segment have been been assigned or
    not.
    If not, check if the Cost element is Revenue related, assign Profitability analisys. If not, check with settings of PCA.
    You shoukd never assign PC to a cost element ntil unless it is a Revenue element.
    Hope it helps
    Thanks

  • Where can I define Account assignment category for order settlement rules

    Dear Gurus,
        When I used Tcode: CO07 to create a rework order for parent order. But I cann't find the Account assignment category = Ord (Order) in the maintain Settlement rule overview.
      Where can I define Account assignment category for order settlement rules?
      Please help me. Thanks!
    Regards
    Paul.

    I've resolved this question.
        Firstly, run OPJH - Define Order Types, we should assign settlement profile for the order type.
        Secondly, Run OKO7-Maintain Settlement Profile, find and mailtain the settlement profile. In 'Valid Receivers' we should set the field 'Order' = 1-(Settlement Optional).
        Thirdly, run CO07 - Create Order without material. We can find account assignment catetory 'ORD' in maintaining Settlement rule.
    Edited by: Paul Chan on Feb 16, 2009 5:15 AM

  • Where to configure Account Assignment Category for WBS Settlement Rule?

    Hi,
    I would like to know where is the Account Assignment Category for WBS settlement rule (FXA, CTR, G/L, WBS)  being configured. (SPRO Path)
    Currently when I go to our settlement rule creation screen I can only see WBS and FXA, I need to add MAT (Material)
    Thanks!
    Regards,
    Vivian

    Hi Shrikant,
    Do you mean in my CJ02 WBS Settlement Rule creation screen, I cannnot put MAT as account assignment category?
    Does it mean that WBS element CANNOT be settled to material? and we can only settle PM order to material?
    Thanks!
    Regards,
    Vivian

  • FB70 why does system show warning message "enter true account assignment" ?

    FB70 why does system show warning message "enter a true account assignment object with revenues" ?
    i enter profit center but i still get warning message "enter a true account assignment object with revenues" 
    what should i do ?
    my  system have CO-PA .

    Dear,
    Please see that the profit center which you are entering in FB70 must have segment.
    still it gives warning message do worry enter it will post the transaction.
    bsrao

  • When Role is assigned to User through membership rule then it's membership is not added to OID ?

    Hi All,
          I have OIM 11gR2 installed with  LDAPSync enabled.
    When tried to assign Role to User through membership rule, Role is successfully assigned to User in OIM, but it is not added in OID.
    Role membership is added in OID when User requests Role through Catalog search. Also, Role membership is added in OID after running job 'LDAPSync Post Enable Provision Role Memberships to LDAP '.
    How can I add Role membership in OID  as soon as Role is assigned to User  through membership rule in OIM ?

    Hi
    It sounds like you have not selected anything on the Presentation & Data tab of the Workspace Startpoint/User Service.
    You need to specify:
    Your Asset (the form you want to present to the user)
    An associated Action Profile (tells the server how you want the form rendered...typically it is set to Default which uses the Render PDF Form process)
    The variable to hold your data(typically an xml variable)
    Make sure these are set.
    Diana

  • Warning: No patterns found. Skipping rewrite rules creation for Meet simple URLs.

    Hi 
    It feels like a have tested the most that I can Google, but im new on Lync..
    I have a lync multitennant 2013 server.
    But when I run enable-cscomputer I get the following
    WARNING: No patterns found. Skipping rewrite rules creation for Meet simple URLs.
    WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
    WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
    WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
    WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
    WARNING: "Enable-CsComputer" processing has completed with warnings. "5" warnings were recorded during this run.
    WARNING: Detailed results can be found at "C:\Users\xxx\AppData\Local\Temp\Enable-CsComputer-26374787-f6b5-4a07-b8f4-7bd819d3ffc3.html".
    Im not sure what to test? And what to do to verify that the settings is correct. Im new on Lync.. So all tips are greatly appreciated.

    To set the DNS name for the simple URL for multitenant Lync Server, run the following cmdlets:
    $BaseURL = "https://meet.litwareinc.com/"
    set-CsProvisionServiceConfiguration -SimpleUrlDnsName $BaseURL
    To verify that the DNS name was set, run the following cmdlet:
    (Get-CsProvisionServiceConfiguration).SimpleUrlDNSName
    The following is a similar thread you can refer to:
    http://social.technet.microsoft.com/Forums/lync/en-US/dfa064d8-5c53-4a69-aecd-ffe487a353d1/lync-meet-now-not-working
    Lisa Zheng
    TechNet Community Support

  • Create warning message at the time of order creation

    I am looking for a  solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"

    The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver.  If the used cost center is belongs to some other company code, said warning message should occure.
    I tried user exit, field exit, also used std message control (KO-458).  Nothing is working.

  • Getting Warning while assigning Dimension in to Model in version 10.0

    Hi,
    Iam getting an warning message "Control definition not valid because new Dimension are added in to Model" & "Control result was reset because new Dimension are added in to Model" while assigning Dimensions to the Model.
    Please help me on this issue. Screenshot attached.
    Regards,
    Sudheer

    Hi,
    Controls might exist on this model.
    To check for the existing Controls.Goto Aministartion-->Rules -->Controls .  After you adding the new dimension you have to revisit the controls which were already existing.
    Thanks,
    Raju

  • TM01 Create Fixed-Term Deposit : Warning message encountered

    Hi,
    I am creating Transaction in TM01. Upon saving, warning message is displayed "No accoutn assignment reference was found". What could be the possible reason why the error message prompt. and what could be the possible effect if I continue saving the Transaction.
    Thanks.

    Hi Kalawiswis,
    To configure Acct Assignment Ref, please follow the follwoing series of links:
    Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Assignment References
    If you are using standard AAR available, no need to create new, but recommended to create your own with correct identification parameters
    Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Assignment Reference Determination (OTC Transactions)
    You can use the standard assignemnt or create your own rules for deriving AAR.
    Financial Supply Chain Management> Treasury and Risk Management>Transaction Manager> General Settings> Accounting> Link to Other Accounting Components> Define Account Determination
    This needs to be done after finalising your GL head where actual flows should post the amount with TBB1
    Regards
    Prasad AV

Maybe you are looking for

  • How do I burn a disc image (img file) to dvd?

    I created a disc image from iDVD, but my disc drive on my home computer is broken. With a flash drive, I copied the img file onto my work computer & burned the file to disc. However, while the file copied, the disc doesn't play as normal dvd. What am

  • Button link to a specific frame in time line

    Ok I have created my buttons and the content for the specific frames. I have named the button and given it an instance name. I have also given my specific frame a name and set that label type to Name. Whats the code for turning getting my button to l

  • Query Parameter Data Type error betwee IE6 and IE7

    Hello all. This is a strange one. Using MII v12. When setting parameters for a SQL query from Javascript, the query executes properly on IE7 but generates errors on IE6. The errors are JDBC errors having to do with "Conversion failed when converting

  • Depreciation run for a period of 24 days

    Hello Plz help me how to run dep for 24 days in the month. Cany any body

  • Billing relevance in MTO with assembly processing

    Hi, can anyone provide advise on this? I created a service material (DIEN) that will generate a production order in the sales order.  However, if i set the billing relevance to 'Not relevant', the production order cannot be created.  Is there a reaso