Warning message before deleting notes

Hello, I'm using Macs Mail program and syncing my notes with icloud. Sometimes I slip up and delete a note too soon and it automatically deletes the note permanently. I remember I used to have a warning come up before it did that, but now, when I delete the note once, it's permanently gone forever. It's not even in the trash or online.
Does anyone know how to set a warning before you delete a note using mail?
Thanks
Mail v. 5.2
OSX Lion 10.7.2
Mac Book Pro Intel Quad Core

Thank you so much for replaying
I have another question related to creating popup
I have page template and only one jspx page based on the template named"UIShell.jspx"
I make a lot of page fragments , I have - untill now- about 15 page fragments.
all these fragments are shown as dynamic regions within UIShell.jspx"
My question is
Should I create popup dialog window in each page fragment in order to display the messages?
If the answer is "YES" this will not be a good approach - I think.
Is there a way to create just one popup dialog and use it an any page fragments.
Regards
Edited by: ta**** on Apr 17, 2011 8:44 AM

Similar Messages

Display Warnning message before delete row

i have a table and i added a column and but in it a button that perform delete action
when i press the button a row is deleted but i want to display warning message before deleting for example
"are you sure you want to delete this row ?" Yes or No
If press yes the row will be deleted else no action is taken
how can i do this ?

You can use clientListener to do this.
<af:commandImageLink text="Submit" id="cil1" partialSubmit="true" >
<af:clientListener type="action" method="customConfirm"/>
</af:commandImageLink>
<af:resource type="javascript">
customConfirm = function(event) {
var answer = confirm('Are you sure you want to delete this row?');
try
if (!answer) {
var component = AdfPage.PAGE.findComponentByAbsoluteId("cil1");
..... your action here.....
catch(e) {
alert(e)
</af:resource>
But if there is a event or event listener on the commandimagelink then it will always be called. To avoid that you could remove the actionlistener and add serverlistener and call it through the javascript function. See the "Web User Interface Developer's Guide for Oracle Application
Development Framework" for more info.

How to display warning message before deleting a record?

Hi all
I want to display a warning popup message( "Do you realy want to delete the record? Yes - No" ) before user delete a record. My page fragment contains simple <af:table> which display the employees data and operations buttons "commit - delete - rollback"
I use Jdeveloper release 11.1.4
Database : oracle 10g
Thanks in advance

Thank you so much for replaying
I have another question related to creating popup
I have page template and only one jspx page based on the template named"UIShell.jspx"
I make a lot of page fragments , I have - untill now- about 15 page fragments.
all these fragments are shown as dynamic regions within UIShell.jspx"
My question is
Should I create popup dialog window in each page fragment in order to display the messages?
If the answer is "YES" this will not be a good approach - I think.
Is there a way to create just one popup dialog and use it an any page fragments.
Regards
Edited by: ta**** on Apr 17, 2011 8:44 AM

Warning messages "You are not a receiver of the work item"...

Hi Experts,
We are facing an issue in which couple of users are getting warning messages "You are not a receiver of the work item" in there Portal Inbox. But they are not getting any warning message while accessing the same from R/3 inbox. We tried replicating the issue but it is working fine for us. Is it related to workitems which are of any particular type??? Kindly suggest.....
Just to add some more thing we have gone through the Forum : UWL workitem error: you are not a receiver of the work item and also the OSS notes: 1133821, but we do not get any appropriate solution.
Please suggest.
Appreciate your quick response.
Thanks,
Harish
Edited by: harish vyas on May 3, 2010 1:24 PM

Hi Enrique,
Yes users are using SSO.
As suggested I have checked in transaction SU53 and there is no error message for the user i.e. we are getting success message as "The last authorization check was successful".
Please suggest what can I try.
Also adding to this, Warning message which users are getting is not a show stopper i.e. they are able to process workitems successfully.
Thanks,
Harish

How to send a warning message before closing soft via X of the title bar

With labview 8.2:
I would like to send a warning message before closing my soft when the user press the "X" of the title bar. Is it possible to do that without a Windows dll?
Thanks a lot,
Daniel.

Gerd,
I think a filter event for 'Panel close?' is more appropriate because you have the possibility to cancel the event or continue the event.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

Throw a warning message before calender opens

Hi,
I wanted to throw a warning message whenever we are clicking on the calender icon but before the calender opens.
Kindly help me.

Hi,
To throw a warning message before the calendar opens, do the next steps:
1- Find the applet that has the calendar icon and open its browser script.
2- On the Browser script Edit Mode, expand the folder "EDIT" that contains all controls mapped.
3- Find the target Control and expand the events to edit the "onfocus" event.
4- Insert some code like that:
function Edit__0__Control__Birth_SDate__onfocus (applet, id)
alert("Message");
}Finnaly, don't forgot the genbscript.
Regards.

How to display a confirmation message before deletion

Hi,
I have an application and I want to display a confirmation message before people delete a record.
The button on page 42 is number 90 "Supprimer cette fiche". It is a Submit as "DELETE_ALL". I have seen that the delete buttons are redirections to the url javascript:confirmDelete(htmldb_delete_message,'DELETE');, but I cannot use this as my button is not a redirection, but a submit.
http://apex.oracle.com/pls/otn/f?p=4550
Workaspace : ESPACE2008
User : guest
password : acdc2009
Name of application is Activites
Thank you for your kind answers.
Christian

Hi Christian.
You can use the same logic for your own processing logic.
the syntax is...
javascript:confirmDelete(htmldb_delete_message,'YOUR_PROCESS_NAME');Replace 'YOUR_PROCESS_NAME' with the name of your page process that handles the bulk delete. Don't for get the single-quotes either side of your process name.
Hope this helps.
Simon

Why is the security warning messages menu deleted on firefox 4?

The warning messages option under security menu is missing on ff4. Is there an easier way to get it back instead of using "about:config"?

Not that I have seen.

IT105 warning message "user does not exist in this period"

Does anyone know if we can change the warning message on IT105 subtype 0001 to be an error message? This is causing an issue when HR are entering the User ID before it's been created in SU01, so sometimes there is a mismatch.
Hope you can help, thanks in advance!

This message is hardcoded as a warning in the method CHECK_USERID_EXISTENCE. Like it was suggested above, you will need an access key to change it into a message type 'E'. Other option is to do this validation via the AFTER_INPUT Method of the BAdI HRPAD00INFTY.
~Suresh

Why does everyone else seem to get 180 days and several warning messages before THEIR accounts are deleted??

I got a text message this morning informing me that my vzw pix account had been permanently deleted due to 60 days of inactivity. So I searched online to see if there was some way to get my pictures back, since I had very little room to store them on my crap phone I deleted them once they were uploaded. I come to find out that no, there is no way to get them back and also it seems that everyone else in the whole world had 180 days and more than one text message an entire month before their account was deleted. This is ridiculous and I would have preferred that Verizon not offer any storage at all if they just delete everything you save with only one warning that you can easily forget about in a month. I also want to know why everyone else seems to get 180 days of inactivity and I get 60, and why they get multiple messages warning them when I got one.

Hello arlahalvorsen,
I know pictures have great value. I'm sorry to hear your pictures were deleted. As you already know once the pictures have been deleted there is no way to retrieve them. The inactive period for "Free" Multimedia and Messaging accounts has been reduced from 180- to 60-calendar days. Previously, a customer would be sent messages at day 150, 170, and 180 letting them know that their account is inactive and subject to termination at day 180 of inactivity. Now customers receive messages at day 30, 50, and 60-calendar days of inactivity. Thank you.
Tominque B.
Please follow us on Twitter @VZWSupport

Fiedl Validation for Warning Message not for Error Message

hi all,
we know for field validation, once it not meet the validation, it will throw out the error message and don't allow you to save the record.
But is there any way to show warning message just a note then user can continue the operation?
Thanks
Amanda

hey ady,
Is there any authoritative explanation from oracle which mention this part? As I need to follow it to our client which explain this is impossible.
Thanks
Amanda

Retrieving deleted Notes from iPad

For some reason, within recent times I have deleted some of my Notes while typing or adding info. This time it was 3 at once, incl. 2 copies of an impt. Note. Is there any way they can be retrieved? Why does this keep happening?

Thanks. I don't have iCloud backup because it gave me endless problems with the iPad and I had to disable it eventually. This is so annoying; Apple Team we are overdue for a solution that allows us to retrieve the Notes more easily, or at least warn users before deleting!

Report on Warning Message in sales order

I have configured in OVA8 such that it only gives a "Warning Message" and does not block the sales order.
Because these sales order are not blocked they don't need to be released. I need a report on list of sales order where warning messages have appeared for credit limit exceed.
As its only warning message and not erro, it needn't be released so VKM1, VKM2 & VKM4 doesn't solve the issue.

Hi,
It is not possible to get the report as you required in Std. System considers the sales order if the warning msg appears as same as a normal SO without any warnign msg. In status level (table VBUK) there won't be any change.
If you need it deliberately, then you shall take help from ABAp to develop a Z-report that too you need to use some sales order level user exit to capture the warning message(Message no. V1152) generated sales order no.s and then you can use the same info in Z-report.
Hope this helps..
Reg,
JJ
Edited by: Jagsap on Apr 14, 2010 1:22 PM

Warning message when launching iTunes

I upgraded to iTunes8 and on launching iTunes, the following error message appears "The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of other CD burning software. Please reinstall iTunes." I then reinstalled the "Repair" from the downloaded file (iTunes8Setup), but the warning message still appears after rebooting my computer and launching iTunes . I then removed iTunes from my computer and reinstalled iTunes from this download (iTunes8Setup). I rebooted my computer and launched iTunes, same result. Any ideas on how I can fix this warning message. Please note this warning message did not appear when launching my previous version of iTunes.

I do not burn any CD's so don't have one to insert into the drive to test the diagnostics. No I am not running 64 bit version of XP.
See below results from rinning the diagnostics.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
ACER Aspire E500
iTunes 8.0.0.35
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.0.25
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number D1F09C78CC** <Edited by Moderator>
Current user is an administrator.
The current local date and time is 2008-09-29 21:28:09.
iTunes is not running in safe mode.
Video Display Information
ATI RADEON XPRESS 200 Series
SAPPHIRE RADEON X300SE
RADEON X550
SAPPHIRE RADEON X300SE - Secondary
RADEON X550 Secondary
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {EFAF9826-1BC6-4217-A75F-70968D938047}
Description: Bluetooth LAN Access Server Driver - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:03 1970
Lease Expires: Thu Jan 01 04:00:03 1970
DNS Servers:
Adapter Name: {31029B03-6743-4E35-B15F-555C4A5A585E}
Description: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:03 1970
Lease Expires: Thu Jan 01 04:00:03 1970
DNS Servers:
Adapter Name: {1A454B26-0287-4327-8BBC-7F3E9B4D5B16}
Description: WAN (PPP/SLIP) Interface
IP Address: 86.97.62.8
Subnet Mask: 255.255.255.255
Default Gateway: 86.97.62.8
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:00 1970
Lease Expires: Thu Jan 01 04:00:00 1970
DNS Servers: 213.42.20.20
213.42.20.20
195.229.241.222
Active Connection: ADSL USB MODEM DIAL-UP
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-09-28 06:05:23.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: NTIDrvr (1.0.0.6),
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.0.35 is currently running.
iTunesHelper 8.0.0.35 is currently running.
Apple Mobile Device service 2.10.31.0 is currently running.
Universal Serial Bus Controllers:
ALi PCI to USB Open Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
Serial Number: JQ608FRWTXL
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

Warning message before deleting notes

Similar Messages

Maybe you are looking for