Warning message during the settlement of WBSE

Hi,
We have PS structure. During the settlement cost booked in WBSE moves to AUC & from AUC to final asset.
While settling the cost from AUC to Final asset, I am getting the warning message " Asset Value date earlier that Asset Capitalization date". If I am still continues then settlement for the that WBSE will be done.
Now what are the impact of this warning mesage to WBSE settlement, Depreciation run & its value calculation.
Please advice whether I should continue this type of settlement or do some rectifications..
Thanks & Reagrds,
Pradip

When you do the settlement to your final asset you can fill in the Asset Value date (right part of the screen).
This date is used to derivate the capitalization date and then the depreciation start date (it is possible to fill this in manual, or to change it manual in the asset TC AS02)
You have to look in the in the asset what is in and what is the reason of the message TC AS03

Similar Messages

Create warning message at the time of order creation

I am looking for a solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"

The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver. If the used cost center is belongs to some other company code, said warning message should occure.
I tried user exit, field exit, also used std message control (KO-458). Nothing is working.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

How to load a warning message in the sub_VI in a true 'case' statement.

I wrote a sub virtual instrument (sub_VI) containg a case structure in which a warning message is supposed to be shown only when a case is true, and this works fine by itself alone. However, when I put this sub_VI in the main VI program, the warning message doesn't come up even when the case under sub_VI is true. Is there any way to show this warning message even with the sub_VI under the main VI ?

By default, sub VI's do not open their front panel when run. If you are putting your warning message on the front panel, then the message will appear when the VI is run on its own (as the main VI) but not when it is run as a sub VI.
If you use one of the dialog functions such as the "One Button Dialog" fromt the "Time and Dialog" menu, then the message will appear even if used in a sub VI.
The other option is to right click on your sub VI and set it's properties to open when run and close again afterwards.
Rob

HT1848 i Authorize my apple 4s in to my computer,but my phone non syncing to my computer, the warning message is , the phon colld not synced because this computer is no longer autherise for purchased item that are on this iPhone., wat i do??

I Authorize my apple 4s in to my computer,but my phone non syncing to my computer, the warning message is , the phon colld not synced because this computer is no longer autherise for purchased item that are on this iPhone., wat i do??

Well Authorize the Computer...........

Warning Messages to the log

Hi Experts,
I want to send a warning message to the order log , for this I used
CALL FUNCTION 'CRM_MESSAGE_COLLECT'
        EXPORTING
          iv_caller_name = 'ORDER'
          iv_ref_object = iv_guid
          iv_msgno       = 002
          iv_msgid       = 'ZMSG'
          iv_msgty       = 'W'
          iv_cumulate    = 'X'
        EXCEPTIONS
          not_found      = 1
          appl_log_error = 2
          OTHERS         = 3.
MESSAGE ID 'ZMSG' TYPE 'W' NUMBER '002' .
But the problem is order is not saving at all, I want order to be saved and the warning message to be in the log.
Please help me out in this.
Thanks in Advance,
Praveen

I am using it in the BADI_ORDER_SAVE, when I do not add this message to the log the pop up message is coming out fine.
In this FM if I send E to iv_msgty ,its working fine too.The problem is coming only for warning messages.
Your time in replying to this thread will be appreciated.
Thanks in Advnace,
Praveen

Warning message on the portal

Hi,
We are able to get error message on the cProjects portal using the method MESSAGE_ADD of class CL_RPM_MESSAGE_SERVICES by passing type E. But when i try to pass type W or I for warning or information message it does not show up on the portal. How do we display a warning message on the cProjects portal.
Regards,
Simmi

the warning message worked in another method

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled new

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled the newest and one older version of itunes. still nothing. I tried to delete some files that is hidden as directed by apple. I have been trading emails with customer support but it has been no help at all. I am running Windows XP. Before i wiped my computer I ran itunes with no problem, on this computer, this week.

WOOOOOOOOOOOO!!!! JUST WANTED TO UPDATE Y'ALL THAT BY SOME STROKE OF HEAVENLY GLORY, ITUNES DECIDED TO WORK AGAIN!!!
WOOOOOOOOOOOOOO!!!
How did I do it you ask??
after all the stuff I updated you about, I tried one last time to install....still didn't work...so once again I wiped my system of everything itunes and apple related
well today I was trying to watch a video that required me to get the quicktime plug in, and it too me to a page that was a quicktime install + itunes 7.blah blah blah instead of the other way around
well, don't ask me why, but low and behold
IT WORKS!!!!
I HAVE MY ITUNES BACK!!! (JUMPS FOR JOY)
Just wanted to share my shear elation

Can we save the warning message in the message log of Lead.

Hi,
I have an requirement where i have to raise an warning message while "creation of lead from campaign" on campaign UI, I can raise that warning message using below code.
DATA lr_message_service TYPE REF TO cl_bsp_wd_message_service.
lr_message_service = cl_bsp_wd_message_service=>get_instance( ).
lr_message_service->add_message( iv_msg_type = if_genil_message_container=>mt_warning
iv_msg_id = 'ztest'
iv_msg_number = 006
iv_msg_level = '1' ).
but how can i retain this warning message in the lead message log ? "when ever i will open that lead again that warning message should be there"
thanks & regards
raman khurana.

Hi,
Below are the steps to write to the log and then read it,
1. Create a Log useing FM BAL_LOG_CREATE. This will return the log handle.
2. Add messages to log using FM BAL_LOG_MSG_ADD. Importing parameters are log handle and the message.
3. You can read the log by passing the log handle to FM BAL_GLD_SEARCH_MSG. This will return the message handle.
4. Now pass the message handle to FM BAL_LOG_MSG_READ. This inturn return the message id and class. Pass the msg. details to FM BAL_DSP_TXT_MSG_READ to read the message text.
Regards,
Arun Kumar

How to aviod L3 008 message during the TO creation (Technically)

Hi ,
How to skip the L3 008 error message during the TO cration , we have picking strategy user exit is active and we want to skip the L3 008 error message for specific logic in user exit .
We had found FM RV_DELIVERY_PICK_VIEW is helpful but how to implement at quants level or LIPS table ? .
Please suggest .
Thanks ,
Raghu

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

How to handle warning message for the fields in tab merging , PERSONAS 2.0

Hi all,
Please advice me on the below issue.
In a transaction VA32 , I have merged the fields from one tab to another tab using tab caching.
when i try to change the value of a merged fields , it throws the warnings message. So it is continuously looping from one tab to another tab.
So i tried to use the additional editor concepts in tab caching as below.
Looping is stopped and throws warning message in the same tab.
All the changes are saved successfully only when the enter button is clicked once in the main screen, else the changes are not saved and my previous value remains.
Anybody have an idea on how we can use Additional actions in Tab caching concepts.
Thank you,
Arun

Hi Kranthi,
When i try to save the fields which i merged from different tab is not saving.
Please find the below details.
Green highlighted fields are custom fields which is merged from different screen like header or item overview screen. This is handled in script button.
Red highlighted fields are merged from different tab like shipping or sales using tab caching concept.
While changing the value of the fields which is merged from different tab , and press ENTER then it throws the Warning message if occurs.
After warning message, if i try to save using the script button for copying all the custom fields which is merged from different screen , pasted it to their respective screens and also saved.
Its working fine.
When i try to save it before pressing ENTER button then the respective changes had made in the merged fields from different tab are not reflected.
How we can handle this issue?
Thank you,
Arun

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Script for generating warning message during Shutdown by GPO

Hello,
I want to apply GPO in my AD to generate a warning message in the pop-up window just after when user click SHUT-DOWN in their system .
But I don't know what are the script for the same in batch file. Any body please suggest me.
Thanks

Hello,
i know the process how to apply it , the only things i have a problem is the content of script as i mentioned above and now below also. I shown the script above which i used so far here only i need how to improve my script .
echo msgbox "Hey! Here is a message!" > %tmp%\tmp.vbs
cscript /nologo %tmp%\tmp.vbs del %tmp%\tmp.vbs
Thanks

Warning messages with the option to continue or cancel

I am fairly new to the world of JSF and I need to have the ability to present a warning to the user, and allow them the option to continue or to cancel. I need to do this via a message on the page with a link rather than a javascript alert box. The basic usability would be this, the user uses the webapp to create an object, they can then go in and edit the object, while editing they have the option to delete the object, the "delete" control is a button. If they click on this button, I need a way to warn the user but allow them to continue anyway. Currently we have a facility to add a warning to the page, but what I would like to do is add a link or even a button to that page that will allow the delete to take place. Does anyone have any ideas? I've spent quite a few hours on google and haven't found anything similar to what I'm trying to do. The inability to use javascript has been dictated to me, so that is not an option.

Try this...
Create two similar "submit" buttons. The only difference is that one will reload the current page, with your warning message displayed. The second will actually execute the delete action.
When the page is first viewed, the first button will be rendered and the second button will not be rendered. You can facilitate this using the rendered attribute on the commandLink or commandButton, and then tying that to a boolean variable in the backing bean.
When the first delete button is clicked, you perform the necessary action to display the warning message, flip the rendered boolean, and return the same page again. The page will be reloaded, this time with the second button rendered and the first button not rendered.
When the second delete button is clicked, you perform the delete, flip the boolean again (especially if your backing bean is in session scope!) and return the user to the appropriate page. If the user chooses cancel, then remember to flip the boolean again.
Hope this helps!
CowKing

How do I enable the low ink warning message on the HP 7520 e all in one printer

How do I enable the low ink warning message on the HP 7520 e all in one printer? Or is it even available on this model?
This question was solved.
View Solution.

ccardwell,
Welcome to the HP Forum.
The following Assumes a Recent Windows Operating System is installed on your computer...
The Photosmart 7520 allows you select when you would like to receive Ink Alerts:
Right Away -- as soon as there is a need for attention
Only when you initiate a print job
The Full Feature Software installation procedure places the Printer Assistant shortcut on the Desktop.
Install Full Feature Software – Photosmart 7520
Open the Printer Assistant shortcut > tap on the Estimated Ink Levels icon (along the top ribbon) >
Toolbox opens > Select tab Advanced Settings >
Under Show Alerts > CHECK desired setting
Click Close
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Warning message during the settlement of WBSE

Similar Messages

Maybe you are looking for