Warning Message:- Field BRSCH from structure CUSTOMER-CENTRAL_DATA-CENTRAL-DATA is provided by Business partner

Hi Experts,
I get this error when replication the Organization Unit created in transaction BP from CRM to ECC.
The error is generated in ECC system and Error Class is CVI_EI.
Any ideas.
Kind Regards,
Gaurav

Hi Gaurav,
The Business partner does not have 'industry Key' that is reason the warning msg is coming.
BRSCH- Industry Field
you can check this in structure 'CMDS_EI_VMD_CENTRAL_DATA ' which will be filled at run time and later validation happen in Program 'Fill_customer_central' on it. You can set up breakpoint at line number 183 where the validation is failing and warning message is getting raised.
Please assign point if above information helpful.:-)
Thanks
Prem

Similar Messages

Warning message in creation of structure

Hi,
Created a structure combining 3 tables .While checking it out showing a warning message
Y***-NETWR (Specify reference table AND reference field).
y***-VOLUM(Specify reference table AND reference field).

Got my answer...sorry

Warning message on jump from a BI report

On jump from a BI report to another (from any characteristic or key figure), following warning message comes up in the second report "Source selection for 0FISCPER incompatible for target selection". This is user specific, not all users are getting this message. It is not an authorization issue. Please provide your thoughafter and soughtafter suggestions.
Edited by: Suprabhat99 on May 18, 2011 3:23 PM

Hi Suprabhat,
Please check if all the Query restrictions like variables,selection options,interval,hierarchy etc is same for Source and Target Query for that paticular char - 0FISCPER.
Then Incase there is no discrepancy in above types then please check SAP note 1265027:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323635303237%7d
Also below forum should help resolve your issue :
Re: Jump Query
Regards,
Akanksha

How to set not synchonize from CRM to R/3 in some type of business partner

Dear Sir,
our office have the ECC6 and crm 5.0, we have the some typel business partner synbetween r/3 and CRM . However, we had setting one bussiness partner number with external number , and we are not allow to synchoize back to r/3 . Where can i settting??
Please kindly advise.
Thank you and best regards
Vimol

Dear Krisnen,
Please kindly clarify for more your explanation . We never use t-code: smoeac. So, I don't know how to configure it .
THnak you and best regards,
Vimol

Add field from structure maintanace option for datasource in LBWE (BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field not by structure maintanace option in LBWE but form append structure option from that structure MC02M_0ITM ( that field is not in that maintanace option in LBWE) than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Unable to add field from structure maintanace opt for datasource(LBWE BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Cant add field from structure maintanace option for datasource(LBWE BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Warning messages creation in VKP5 & VKP6

Hi All,
I am creating some warning messages in VKP5 from BADI " SPC_POSTING_CONTROL" .
1.Warning messages are not stroing in the LOGS , because logs badi is triggering after executing the VKP5.
2.When i am creating the pricing document from menubar option in the o/p of VKP5 Badi is not triggering .When i click on the save button then the badi triggering but i am unable see the messages in the log .
3.I have found one exit "EXIT_SAPLWVK1_003" this one triggering when i click from menu bar option but it does not have table paramater for storing more than one warning message it contains structure i can store only one message .
4.When i run the VKP6 also badi is not triggering but exit is triggering when i change any data in the o/p of vkp6 .
Our sytem is SAP-IS retails system ,same fucntionality working in SAP -R/3 . I donot the reason why its not working for SAP-IS retail system .
If any body have the solution please provide to me .
Regards
Srihari

Hi Shihari
Check the BADI 'PWL_SP_DETERMINATION'. You have a sample coding, en method PROCESSCHECK_AND_SP_DETSEQ_SET you have this coding:
* Assumption: No worklist entry if change of margin is less than 5%
* Caution: There might be prices that are zero, so exclude that case
if ( not pi_i_kalp-endpa is initial ) and
*--- Only external vendor or internal vendor with sales price (in case
*--- of a two step calculation purchase price can be zero, the
*--- following check does not make sense then)
     ( ( pi_i_kalp-bewrk is initial ) or
       ( not pi_i_kalp-bewrk is initial and
         not pi_i_kalp-ekpnn is initial ) ).
*-- Determine margin with curr. sales price and new net/net purch price
    workfield = ( pi_i_kalp-endpa - pi_i_kalp-ekpnn ) * proz100
                / pi_i_kalp-endpa.
*-- Relation of new and old margin ------------------------------------*
    margin_relation = ( workfield / pi_i_wkbp_copy-spabr ) * proz100.
*-- Absolut change in margin ------------------------------------------*
    margin_change = margin_relation - proz100.
    margin_change = abs( margin_change ).
*-- Margin change lower than a certain limit -> Exclude worklist entry *
    if margin_change lt margin_change_max.
      pe_exclude_calc_item = 'X'.
*---- Create message in log -------------------------------------------*
      clear i_log.
      move-corresponding pi_i_kalp to i_log.
      i_log-msgid = 'WV'.
      i_log-msgty = 'I'.
      i_log-msgno = '852'.
      i_log-msgv1 = margin_change.
      i_log-msgv2 = margin_change_max.
      append i_log to pe_t_erro.
      exit.
    endif.       " Change lower than a predefined maximum limit
endif.         " PI_I_CALP-ENDPA not zero
I hope this helps you
Regards
Eduardo

Issuing a warning message while changing the payment terms in FB02

Hi Gurus,
The requirement is as follows:
For a particular payment terms meant for customer only when we change the payment terms in FB02, the system should give an warning message.
For example - A customer has the payment terms 0001in his master data and thus in the accoutning document as well after releasing billing to accounting. An user wants to change the payment terms to 0070 being in FB02. As and when he puts the payment terms 0070, the system should give an warning meesage saying 'bla bla bla ........' or the same message at the time of saving the document.
How to make this possible. Please help.
Rgds,
BABA

Mr. Tiwari,
This is the standard feature of SAP!!! You get below messages
1)
Net due date on 05.10.2007 is in the past
Message no. F5149
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number can be taken from the technical documentation.
2)
Net due date on 05.10.2007 is in the past
Message no. F5149
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number can be taken from the technical documentation.
Terms of payment changed; Check
Message no. F5231
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number can be taken from the technical documentation.
Regards
Santosh Hegde

MSS - ECM - Have control about the error/warning messages

Hi experts,
We're working on MSS 6.0 EHP2.
We need to manage the messages appeared in the Compensation Planning scenario. It's possible to get a lot of messages if you have many employees. Then, I'd like to manage those messages to filter only the most important ones.
In the presentation situated in http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e04131e7-a828-2b10-23bd-9fcf1a33e418, page 24 it shows: "Messages appear as defined in Customizing" But I don't know how I can do it.
I can personalize the iview and put the message area to invisible, but then we lost all the messages and that it what we don't want.
Could you please help me??
Thanks

Messages returned are of types : Informational, Warning and Error. What you can do (if you want to do from WD Java side ) try checking the BEcmplanning Web Dynpro Component present in MSS-ECM development component. There if you go to the context of the component controller you will see a context node named something as MD_Messages .... This context is filled at the time a backend function module is called and then based on the selected plan type FPM message manager gets the related message and displays in the message area. What you can do is.. before it gets displayed you can write a small logic to filter the messages..
In our case actually requirement was something related to more customization, where we needed to add (some messages based on custom logic) and remove some of the SAP message. So what we did, after getting the message from SAP standard Function module we passed the message table content to our custom function module which at the backend filtered/added messages and the final messages we got from our custom function module, were placed back into the MD_Messages context so the FPM message manager displays what we finally gave to it.

Supression of warning message

Hi All
I am getting warning message
Initial RANGE line for customer exit variable ZCALDAYFISPER is ignored    after the execution of report and before the input variables. I want to supress this mesaage or remove it...
How to do it?/
Please help
Regards
Megha

Hi Megha,
if you are using a webtemplate then you can suppress the warning message by including
        <param name="SUPPRESS_SYSTEM_MESSAGES" value="X"/>
        <param name="SUPPRESS_WARNINGS" value="X"/> in the html code.
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value="YTEMPlate1"/>
         +<param name="SUPPRESS_SYSTEM_MESSAGES" value="X"/>+
         +<param name="SUPPRESS_WARNINGS" value="X"/>+
         <param name="VARIABLE_SCREEN" value="X"/>
         <param name="MENU_BOOKMARK" value=""/>
         <param name="MENU_CHARACTERISTIC_PROPERTIES" value=""/>
         <param name="MENU_VALUE_PROPERTIES" value="X"/>
         <param name="MENU_QUERY_PROPERTIES" value="X"/>
         TEMPLATE PROPERTIES
</object>
Regards,
Rk.

Once the Add-on is loaded into SAP B1 it is genearting follwing the warning message

Hi Experts ,
Once the Add-on is loaded into SAP B1 it is genearting follwing the warning message is "Conversion from string """" to type 'Double' is not valid "
Please find the attachment
Thanks for the Support,
Satish.

Hi,
At least one of addon function is to convert a string to number. If that string is empty, it may cause error. Need verification before converting.
Thanks,
Gordon

Help in fetching data from structure

Hi All
       I have a requirement wherein I need to show date field DATUM from structure PTK10 .This is related to trip reporting. Now I don't see this particular field in any DB Table. How can I show this date in my report? any clues..
is there any way out..?
Pls respond .
Thanks & Regards
Babita Sharma

Hi
    I am using following tables in my program.
TABLES : ptrv_head,     "General Trip Data
         ptrv_scos,     "Trip Statistics-Cost Assignment
         ptrv_perio,    "Period Data of a Trip
         pa0001,        "HR Master Record:Infotype 0001(Org.Assignment)
         t706b5,        "Names for Travel Expense Types
         v_ptrv_head,
         "Join to Tables PTRV_HEAD & PTRV_SHDR & PTRV_PERIO
         v_ptrv_srec.   "Join to PTRV_SREC & PTRV_SADD
Also , as suggested by Mrutyunjaya, direct access of structure in select
query is not possible.
any clues..
Thanks & Regards,
Babita Sharma

Warning message in Adobe form

Hi ,
My form is accessed through portal.
I want a warning message to be displayed when there is no data in the dropdown.
The message can be given
1. At the start when the form opens up Or
2. When the user clicks on the dropdown.
Please help me with this.
Points will be rewarded for useful answers.
Thanks.

Thomas,
In the initialize event of your drop-down put following code.Change language to javascript.
        var DataBinding = this.bind.ref;
     // the data binding may contain "$data.<root data name>" instead of $record
     DataBinding = DataBinding.replace("$data."+xfa.record.name,"$record");
     DataBinding = DataBinding.replace("$record.", "");
     var itemNode = xfa.form.resolveNode("xfa.datasets.data."+xfa.record.name+".sap-vhlist."+DataBinding.replace(/(\.)/g,"\\.").replace(/(\[\*\])/g,""));
     var size = 0;
     try
         size = itemNode.nodes.length;
         xfa.host.messageBox("Size is :"+size);
         if(size == 0)
              xfa.host.messageBox("Month is empty");
     catch(e)
          xfa.host.messageBox("Error");

Create Business Partner from foreing customer

Hi all.
I have a problem. When I create a customer by transaction XD01, if customer is Spanish (I'm in Spain),
business partner is created automatically, I see this is right in transaction BP. But if I create a foreing customer, business partner isn't created, I mean, in transaction BP, the new customer doesn't exist.
Could you help me?
Thanks a lot.
Marta.

I am not sure, whether the issue is in R/3 or in CRM. If the issue is there when you try to create an overseas customer via XD01, then you need to check the partner determination procedure configuration. If the issue is there when you execute BP, then you need to check in CRM. By the way, what is the message system was popping up and in which transaction code.
G. Lakshmipathi

Warning Message:- Field BRSCH from structure CUSTOMER-CENTRAL_DATA-CENTRAL-DATA is provided by Business partner

Similar Messages

Maybe you are looking for