Warning message in call transaction
Hi,
I am using a CALL TRANSACTION with MODE E due to which all the Warning messages are being ignored. I can't change the MODE E option.
Is there any other way by which i can display the warning messages while updating data.
THANKS IN ADVANCE.
Try using FM FORMAT_MESSAGE after CALL TRANSACTION.
Similar Messages
-
Display error messages in Call transaction
Hi Gurus,
I have donme BDC using call transaction..can anybody help me in displaying the error messages in call transaction..
A detailed code wud be very much helpful..
full marks wud given
regards
Sahilhi check this,
PERFORM Z11_BDC_VA02.
ELSE.
MESSAGE I013 WITH TEXT-013.
ENDIF.
ELSE.
CLEAR V_FLAG.
MESSAGE E012 WITH TEXT-012.
ENDIF.
FORM z11_bdc_va02 .
*COVER 1
perform bdc_dynpro using 'SAPMV45A' '0102'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-VBELN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-VBELN'
wa_head_detail-vbeln.
*COVER 2
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
*COVER 3
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=ITNE'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
*COVER 4
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-KWMENG'.
perform bdc_field using 'VBAP-MATNR'
wa_head_detail-matnr.
perform bdc_field using 'RV45A-KWMENG'
v_kwmeng.
perform bdc_field using 'VBAP-VRKME'
wa_head_detail-meins.
*COVER 5
perform bdc_dynpro using 'SAPLSPO2' '0101'.
perform bdc_field using 'BDC_OKCODE'
'=OPT1'.
call transaction 'VA02' using it_tab1 mode 'A' UPDATE 'S' MESSAGES INTO
IT_TAB_ERROR.
"CAlling transaction with all screen
Loop at it_tab_error.
if it_tab_ERROR-MSGTYP = 'E' .
clear v_flag.
message I014 with TEXT-014.
else.
clear v_flag.
message I019 with TEXT-019.
endif.
endloop.
refresh it_tab1.
clear V_KWMENG.
ENDFORM. " z11_bdc_va02
Reward if helpful,
Gaurav J.
Edited by: GAURAV on Feb 4, 2008 9:10 AM -
Where will store the messages in Call transaction
Hi all,
will the messages in call transaction stored in database? if not where it will be stored?
Thanks for sending reply
VenkatHello Venkat,
Messages in the Call Transaction are stored in a Internal table of type BDCMSGCOLL.They are not stored in the Database.
We need to do the following.
"Declare internal table of type BDCMSGCOLL
Data : t_messages TYPE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
CALL TRANSACTION ia06
USING t_bdc_data
MODE 'A'
UPDATE 'S'
MESSAGES INTO t_messages.
DATA: l_mstring(480).
LOOP AT t_messages.
SELECT SINGLE * FROM t100 WHERE sprsl = t_messages-msgspra
AND arbgb = t_messages-msgid
AND msgnr = t_messages-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH t_messages-msgv1 INTO l_mstring.
REPLACE '&2' WITH t_messages-msgv2 INTO l_mstring.
REPLACE '&3' WITH t_messages-msgv3 INTO l_mstring.
REPLACE '&4' WITH t_messages-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH t_messages-msgv1 INTO l_mstring.
REPLACE '&' WITH t_messages-msgv2 INTO l_mstring.
REPLACE '&' WITH t_messages-msgv3 INTO l_mstring.
REPLACE '&' WITH t_messages-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / t_messages-msgtyp, l_mstring(250).
ELSE.
WRITE: / t_messages.
ENDIF.
ENDLOOP.
Regards,
Arun Sambargi. -
Warning message in LI11N transaction
Warning message "Material flagged for deletion" does not appear in the transaction LI11N - Enter inventory count - for materials flagged for deletion. Tried searching SAP notes but couldnt find. Checked in 4.7, ERP 5 and ERP 6 releases but in all systems no warning message is given.
Is there any solution. I couldnt find any user exits. Tried with field exits. But I believe only error messages could be given in field-exits.
Please let me know if any other solution is possible.
RegardsTry using FM FORMAT_MESSAGE after CALL TRANSACTION.
-
Messages from call transaction don't appear
Hello everyone,
I'm having a problem that i never experienced.
I have a call transaction for T-code 'FOB1', like this:
CALL TRANSACTION f_tcode USING bdc_tab MODE f_mode UPDATE 'S'
MESSAGES INTO messtab.
I allready tried using 'A' mode and 'N' mode, but the problem persists. My table messtab, that should, at least, bring the message for successfull creation of document, is completely empty!! with one difference. If i choose "visible" mode, a warning appears that is not a concern for creating the document. That 'W' message appears in my table messtab, ONLY if i run the call transaction with 'visible' mode. It looks like if the messages are being deleted so fast that the system doesn't catch them.
Any suggestions ??
Thank you.Thank you for all your answers, but my problem persists.
In response to all:
- I tried eliminating the UPDATE statement or using option 'A', but the message table still appears empty.
- When i create a document through transaction FOB1, it does send a S message with the number of the document created.
- I tried creating a Batch Input and process it through SM35, and the log shows several S messages.
I'm having trouble solving this one. Any more suggestions ? -
How to get a message from call transaction in RFC call
Hello :
I would like to ask one favor i make a 2 call transaction in a RFC funtion when i make the first CALL TRANSACTION using te next statement.
CALL TRANSACTION 'F-43'
USING bdcdata MESSAGES INTO messtab2 OPTIONS FROM l_fromopt.
I recive the number of the document in the field sy-msgv1 from the message table messtab2 , then i make the second CALL TRANSACTION and i am waiting to get the other number of the document from the table messtab3 using the next statatement.
CALL TRANSACTION 'FIBLFFP'
USING bdcdata MESSAGES INTO messtab3 OPTIONS FROM l_fromopt. but now the table messtab3 don't send the number of document , and i need to get the number of this document for making a REFERENCE.
thanks a lot for you helpFORM bdc_transaction USING tcode TYPE tcode.
DATA: l_mstring(480).
DATA: l_subrc TYPE sy-subrc,
lwa_t100 TYPE t100.
DATA : gv_ctumode TYPE ctu_params-dismode VALUE 'A'.
call transaction using
BREAK-POINT.
REFRESH gt_messtab.
CLEAR gwa_messtab.
gv_ctumode = gc_ctumode.
CALL TRANSACTION tcode USING gi_bdcdata "#EC CI_CALLTA
MODE gv_ctumode
UPDATE gc_cupdate
MESSAGES INTO gt_messtab.
l_subrc = sy-subrc.
IF sy-subrc <> 0.
WRITE: / 'CALL_TRANSACTION',
tcode,
'returncode:',
l_subrc,
'RECORD:',
sy-index.
LOOP AT gt_messtab INTO gwa_messtab.
CLEAR lwa_t100.
SELECT SINGLE * FROM t100 INTO lwa_t100 WHERE sprsl = gwa_messtab-msgspra
AND arbgb = gwa_messtab-msgid
AND msgnr = gwa_messtab-msgnr.
IF sy-subrc = 0.
l_mstring = lwa_t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH gwa_messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH gwa_messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH gwa_messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH gwa_messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH gwa_messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH gwa_messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH gwa_messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH gwa_messtab-msgv4 INTO l_mstring.
ENDIF.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = gwa_messtab-msgid
lang = sy-langu
no = gwa_messtab-msgnr
v1 = gwa_messtab-msgv1
v2 = gwa_messtab-msgv2
v3 = gwa_messtab-msgv3
v4 = gwa_messtab-msgv4
IMPORTING
msg = l_mstring
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CONDENSE l_mstring.
IF NOT l_mstring IS INITIAL.
WRITE: / gwa_messtab-msgtyp, l_mstring(250).
MESSAGE l_mstring TYPE 'I'.
ENDIF.
ELSE.
WRITE: / gwa_messtab.
ENDIF.
ENDLOOP.
SKIP.
ENDIF. -
Problem with Warning Message in Financial Transactions eg. F-02
Hello Experts,
I have implemented a BTE - SAMPLE_INTERFACE_00001025 as a Z_SAMPLE_INTERFACE_00001025 for Account related transactions say for eg. F-02.
I had to implement 2 scenarios :
1) In which system should display Error Message and stop the user to post FI transaction.
2) In which system displays a Warning message but allows the user to continue with the posting of FI transaction.
The Error message worked successfully as it halted the transaction. But the warning message is not appearing. System is directly posting the FI transaction without showing any warning message.
I also tried using a status message, but it did not work. Neither did Information message work.
Here is what I have used,
I have created a Message class zbudget in which I have specified the messages.
Message E000(zbudget) with var1 var2 var3. ............. This is working successfully.
Message W000(zbudget) with var1 var2 var3.............. This has failed.
Can you please help me out in this.Yes, you are correct Deepak.
The warning message is getting overwritten by the final message "Document Number XXXX is posted in company code YYY".
Is there any way to display this warning message for some time limit. I tried to use Wait for '2' seconds. But this also did not work.
Please help me out as I am not getting any workaround for this problem.
Thanks,
Danish. -
How to track error message when calling Transaction: va02
Hi all,
As we all know, when we change an order through T-Code: VA02, system will update modified data to corresponding database. Meanwhile, if our operate is not legal or incorrect on T-code: VA02, system will call corresponding error messages to us.
Now I want to know:
1. how to track the error messages
2. Is there any Tcode such as: SM21 that we can see the message logs after our operation?
Thanks.Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
USING g_t_bdcdata
MODE g_l_mode
UPDATE 'S'
MESSAGES INTO g_t_msg .
errors will be stpored in the table g_t_msg ..
Thanks . -
Bdc error message in call transaction
Hi all,
Can anyone send me a program where they have used the ' BDCMSGCOLL ' structure and format_message FM. I need only complete program, please don't send sample codings or just a part of coding.
Points are assured.
Thanks and regards,
subbu.Hi,
Here is the BDC recording program for updating a custom field (out of 3 custom fields) in CALL TRANSACTION method depends upon which value is given in text file, based on that the corresponding radio button will be selected for that PERNR in PA30.(For 3 custom fields in PA0007) created.
Flat file contains 1) PENR 2) Custom field1 3) CF2 4) CF3.
The values are like [ '636363', ' ', 'X', ' ' ] .
Here is the complete program using BDCMSGCOLL structure.
report Y0007_BDC NO STANDARD PAGE HEADING MESSAGE-ID RP LINE-SIZE 180." LINE-COUNT 28.
DATA DECLARATION *
TYPES : BEGIN OF TY_0007,
PERNR TYPE PERNR, " PERNR
SCHKZ TYPE SCHKN, " Work Schudule
ZTERF TYPE PT_ZTERF, " Time Magmt Status
R1 TYPE C,
R2 TYPE C,
R3 TYPE C,
END OF TY_0007.
DATA : INT_0007 TYPE STANDARD TABLE OF TY_0007 WITH HEADER LINE,
WA_0007 TYPE TY_0007.
DATA: P_FNAME TYPE IBIPPARMS-PATH.
DATA : begin of int_out occurs 0,
pernr type persno,
mesg(300),
end of int_out.
DATA : BEGIN OF int_err occurs 0,
pernr type persno,
mesg(300),
end of int_err.
include bdcrecx1.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK A WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS : P_PATH TYPE string.
SELECTION-SCREEN END OF BLOCK B.
SELECTION-SCREEN END OF BLOCK A.
CALL FUNCTION FOR INPUT FILE NAME *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = P_FNAME.
p_path = p_fname.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = P_PATH
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = INT_0007
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
*Looping pernr values*
LOOP AT INT_0007 INTO WA_0007.
perform bdc_dynpro using 'SAPMP50A' '1000'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*INSERTING THE PERNR VALUE*
perform bdc_field using 'RP50G-PERNR'
WA_0007-PERNR. "'00001011'.
perform bdc_field using 'RP50G-TIMR6'
'X'.
perform bdc_field using 'BDC_CURSOR'
'RP50G-CHOIC'.
perform bdc_field using 'RP50G-CHOIC'
'0007'.
perform bdc_dynpro using 'SAPMP50A' '1000'.
perform bdc_field using 'BDC_CURSOR'
'RP50G-PERNR'.
perform bdc_field using 'BDC_OKCODE'
'=INS'.
perform bdc_field using 'RP50G-PERNR'
WA_0007-PERNR. "'1011'.
perform bdc_field using 'RP50G-TIMR6'
'X'.
perform bdc_field using 'RP50G-CHOIC'
'Planned Working Time - 0007'.
perform bdc_dynpro using 'MP000700' '2000'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'P0007-BEGDA'
'12/01/2007'.
perform bdc_field using 'P0007-ENDDA'
'12/31/9999'.
*INSERTING THE WORK SCHEDULE*
perform bdc_field using 'P0007-SCHKZ'
WA_0007-SCHKZ. "'N12'.
perform bdc_field using 'P0007-ZTERF'
WA_0007-ZTERF. "'1'.
*INSERTING THE OVERTIME CLASS*
IF WA_0007-R1 = 'X'.
perform bdc_field using 'ZHQ0007-OVT_ELGBLE'
'X'.
ELSEIF WA_0007-R2 = 'X'.
perform bdc_field using 'ZHQ0007-OVT_NOTELG'
'X'.
ELSEIF WA_0007-R3 = 'X'.
perform bdc_field using 'ZHQ0007-OVT_TMPELG'
'X'.
ENDIF.
*BDC output for transaction code*
perform bdc_transaction using 'pa30'. (STD)
perform f_bdc_output using 'pa30'. (write on our own)
ENDLOOP.
**Writing the output**
PERFORM f_write_output.
perform close_group.
*& Form f_write_output
text
--> p1 text
<-- p2 text
FORM f_write_output .
*For Successfull Records*
if int_OUT[] IS NOT INITIAL.
WRITE : /50 TEXT-004 color 4.
write : / sy-uline.
LOOP AT INT_OUT.
WRITE : /40 int_out-pernr,50 '-->',54 int_out-mesg.
ENDLOOP.
ENDIF.
write / sy-uline.
SKIP 2.
*For Error records*
if int_err[] IS NOT INITIAL.
WRITE /53 text-005 color 6.
write / sy-uline.
LOOP AT int_err.
write :/40 int_err-pernr,50 '-->',54 int_err-mesg.
ENDLOOP.
endif.
write / sy-uline.
ENDFORM. " f_write_output
*& Form f_bdc_output
text
-->P_0369 text
FORM f_bdc_output USING VALUE(P_0369).
DATA: L_MSTRING(480).
DATA: L_SUBRC LIKE SY-SUBRC.
REFRESH MESSTAB.
*Capturing the output message*
CALL TRANSACTION 'PA30' USING BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO MESSTAB.
L_SUBRC = SY-SUBRC.
IF SMALLLOG <> 'X'.
LOOP AT MESSTAB.
*Selection for capturing the text for records*
SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
*Moving the text from T100 to local variable*
L_MSTRING = T100-TEXT.
IF ( MESSTAB-MSGTYP = 'W' or
MESSTAB-MSGTYP = 'S' OR
MESSTAB-MSGTYP = 'E' ).
*Moving the success records pernr and text to internal table*
IF MESSTAB-MSGTYP = 'S'.
INT_OUT-PERNR = WA_0007-PERNR.
INT_OUT-MESG = L_MSTRING.
APPEND INT_OUT.
CLEAR INT_OUT.
*Moving the success records pernr and text to internal table*
ELSEIF MESSTAB-MSGTYP = 'E'.
*For getting the error text exactly*
IF L_MSTRING CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.
ENDIF.
CONDENSE L_MSTRING.
INT_ERR-PERNR = WA_0007-PERNR.
INT_ERR-MESG = L_MSTRING.
APPEND INT_ERR.
CLEAR INT_ERR.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
SKIP.
ENDIF.
*& CALL FUNCTION 'BDC_OPEN_GROUP'
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = E_USER
KEEP = E_KEEP
HOLDDATE = E_HDATE.
E_GROUP_OPENED = 'X'.
ENDIF.
*& CALL FUNCTION 'BDC_INSERT'
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'PA30'
TABLES
DYNPROTAB = BDCDATA.
*& CALL FUNCTION 'BDC_CLOSE_GROUP'
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
REFRESH BDCDATA.
ENDFORM. " f_bdc_output
Hope it helps u..
Kindly reward points if helpful
Regards,
Shanthi -
Error message during call transaction
Hi all,
I want to get the message type after calling the transaction method. I've simulated an input for error, and I expect that the returned message type should be 'E' or 'W'. But it (SY-MSGTY and msgtab-MSGTYP) still returns 'S' even there is error. What's wrong ?
Call transaction 'VL02N' USING BTAB MODE 'N' UPDATE 'S'.
messages into msgtab.CALL TRANSACTION tcode USING bdcdata
MODE ctumode
UPDATE cupdate
MESSAGES INTO messtab.
LOOP AT messtab.
msgtype = messtab-msgtyp.
Check what the actual tranaction is giving as message for eg. mm01 does give u a sucess message saying data for the matnr is already maintained. -
Avoiding messages in call transaction.
Hello.
I would like to avoid messages to be displayed during a call transaction.
I have already stored them in an internal table, but that doesn't prevent them to appear during execution.
What should I do?
Thanks.Hi,
Try
CALL TRANSACTION tcode MODE 'N'
Please reward if useful.
thanks
Arjun -
Hi ,
Iam using call transaction(tcode ff67).
In this iam getting warning in foreground where as in background it is not showing the
warning message. In background the record is being saved.
If there is any warning message in background how to handle the situation.hi
warning message is a type of message where the user can still go ahead in processing the transaction.
say for example a person is getting warning message in foreground. if he hits ENTER, he can proceed further. whereas in background, the warning messages occured are overtaken and the processing is done further similar way.
warning message is not error message, it is just like information. so no need to interrupt the process in case of such messages.
you can read the warning message in call transaction method using the internal table with structure BDCMSGCOLL.
DATA: it_bdcmsgcoll like bdcmsgcoll occurs 0 with header line.
CALL TRANSACTION 'XYZ' - -- -- -- - messages into IT_BDCMSGCOLL.
in that structure you have a parameter MSGTYP. you can read the internal table with key MSGTYP = 'W'.
hope this info helps you
thx
pavan -
Pls tell me how to check the errors in BDC CALL TRANSACTION
lemme know
HI ,
check for the bold part..
REPORT ZCONCUR_UPLOAD_TO_SAP NO STANDARD PAGE HEADING
LINE-SIZE 170
LINE-COUNT 58
MESSAGE-ID ZM.
Internal Table *
*-Internal table for the Header input data from the Comma Delimited file
DATA: BEGIN OF IT_DATA_HEADER OCCURS 0,
ID TYPE C, "Identifier
BUKRS(6), "Company Code
WAERS(7), "Currency
NEWKO(12), "Vendor
XBLNR(16), "First Name
XBLNR1(16), "Last Name
BLDAT(12), "Document/Posting date
PK(15), "Reference
WRBTR(15), "Amount
BKTXT(27), "Doc.header text
BKTXT1(27), "Item text
SELNO(8), "Serial No
END OF IT_DATA_HEADER.
*-Internal table for the item input data from the Comma Delimited file
DATA: BEGIN OF IT_DATA_ITEM OCCURS 0,
ID TYPE C, "Identifier
NEWKO(19), "Vendor
BUKRS(6), "Company Code
KOSTL(12), "Cost center
WRBTR(15), "Amount
SGTXT(50), "Text
SELNO(8), "Serial No Header
SELNO1(8), "Serial No item
END OF IT_DATA_ITEM .
*-Internal table for the Header input data from the Comma Delimited file
*-Removing " " From Comma Delimited file
DATA: BEGIN OF IT_FINAL_HEADER OCCURS 0,
ID TYPE C, "Identifier
BUKRS LIKE BKPF-BUKRS, "Company Code
WAERS LIKE BKPF-WAERS, "Currency
NEWKO TYPE RF05A-NEWKO, "Vendor
XBLNR LIKE BKPF-XBLNR,
XBLNR1 LIKE BKPF-XBLNR,
BLDAT(10), " LIKE BKPF-BLDAT, "Date
PK(15), "Reference
WRBTR(15), "Amount
BKTXT LIKE BKPF-BKTXT, "Doc.header text
BKTXT1 LIKE BKPF-BKTXT, "Item text
SELNO TYPE I, "Serial No
FLAG TYPE C,
END OF IT_FINAL_HEADER.
*-Internal table for the Item input data from the Comma Delimited file
*-Removing " " From Comma Delimited file
DATA: BEGIN OF IT_FINAL_ITEM OCCURS 0,
ID TYPE C, "Identifier
NEWKO TYPE RF05A-NEWKO, "Account
BUKRS LIKE BKPF-BUKRS, "Company Code
KOSTL LIKE BSEG-KOSTL, "Cost Center
WRBTR(15), "Amount
SGTXT LIKE BSEG-SGTXT, "Text
SELNO TYPE I, "Serial No
SELNO1 TYPE I, "Serial No
END OF IT_FINAL_ITEM.
**-Internal table for the input data from the file
DATA : BEGIN OF P_DOWNLOAD OCCURS 0,
V_FILEREC(1000) TYPE C,
END OF P_DOWNLOAD.
*--- Internal Table for Success messages
DATA : BEGIN OF I_SUCC OCCURS 0,
HEADER(50),
MSG(100), "SUCCESS message
END OF I_SUCC.
*--- Internal Table for error messages
DATA : BEGIN OF I_ERROR_LOG OCCURS 0,
HEADER(50),
MSG(100), "Error message
END OF I_ERROR_LOG.
*--- Internal table for getting the BDC data
DATA : BEGIN OF IT_BDCDATA OCCURS 0.
INCLUDE STRUCTURE BDCDATA. " Table to hold BDC data
DATA : END OF IT_BDCDATA.
*--- Internal table for reading the messages of call transaction
DATA : BEGIN OF IT_MESSAGE_TAB OCCURS 0.
INCLUDE STRUCTURE BDCMSGCOLL. "Table to hold messages
DATA : END OF IT_MESSAGE_TAB.
DATA DECLARATIONS *
DATA:
V_ERROR_COUNTER TYPE I, " error records counter
V_MSG(100), " used for Error message
V_LINES TYPE I, " used for format message
V_HEAD LIKE SY-CPROG, " Heading for report
XMODE VALUE 'N', " EXECUTION MODE
V_SUCCESS_COUNTER TYPE I, " Success records counter
V_UNAME LIKE APQI-USERID, " User Name
V_TOTAL TYPE I. " Total records uploaded
DATA : V_SELNO TYPE I.
DATA : V_CHECK TYPE I.
DATA : V_HEADER(50) TYPE C. "Header Information
DATA : V_SUCC_MSG LIKE BDCMSGCOLL-MSGV1."Success Message
DATA : V_ZERO(4) VALUE '0.00'. "Checking Zero
DATA : V_CHECK_ZERO LIKE BSEG-WRBTR. "Checking Zero
DATA : V_CHECK_ZERO1 LIKE BSEG-WRBTR. "Checking Zero
DATA : V_SYSTEMDATE LIKE BKPF-BUDAT.
DATA : V_VALUE TYPE I.
DATA : V_VALUE1 TYPE I.
DATA : V_VALUE2 TYPE I.
Flags
DATA:
F_BDC_OPEN, " BDC session open check.
F_CONTINUE_PROCESSING. " To continue further processing
CONSTANTS *
CONSTANTS:
C_SESSION_NAME LIKE APQI-GROUPID VALUE 'F-43', "Session
C_X VALUE 'X'. " Used for falgs
SELECTION SCREEN *
*--- Selection Screen with Block and title
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-038.
PARAMETER: P_FNAME LIKE RLGRAP-FILENAME DEFAULT
'C:\Concur.txt'.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = P_FNAME
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC <> 0.
MESSAGE E999 WITH 'Error in opening a file'(009).
ENDIF.
Top-of-page *
TOP-OF-PAGE .
*---perform to display the standard header
PERFORM STANDARD_HEADER.
--START OF SELECTION--
START-OF-SELECTION.
Upload data
PERFORM UPLOAD_DATA.
move data to bdcdata internal table
PERFORM MOVE_DATA_F43.
*--- Posting the valid data to F-43
IF F_BDC_OPEN = C_X.
*---perform to close bdc group
PERFORM CLOSE_GROUP.
ENDIF.
END OF SELECTION *
END-OF-SELECTION.
CHECK F_CONTINUE_PROCESSING IS INITIAL.
PERFORM DISPLAY_REPORT.
*& Form MESSAGE_FORMAT
MESSAGE FORMAT
FORM MESSAGE_FORMAT.
CLEAR V_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MESSAGE_TAB-MSGID
LANG = 'EN'
NO = IT_MESSAGE_TAB-MSGNR
V1 = IT_MESSAGE_TAB-MSGV1
V2 = IT_MESSAGE_TAB-MSGV2
V3 = IT_MESSAGE_TAB-MSGV3
V4 = IT_MESSAGE_TAB-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
V_MSG = SPACE.
ENDIF.
ENDFORM. " MESSAGE_FORMAT
*& Form F4_HELP
FORM F4_HELP.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = 'C:\'
MODE = 'O'
TITLE = TEXT-025 "'Upload File'
IMPORTING
FILENAME = P_FNAME
EXCEPTIONS
SELECTION_CANCEL = 3
SELECTION_ERROR = 4.
CASE SY-SUBRC.
WHEN 3.
MESSAGE I000 WITH TEXT-007. " Selection Cancel.
WHEN 4.
MESSAGE I000 WITH TEXT-008. " Selection Error.
ENDCASE.
ENDFORM. " F4_HELP
*& Form STANDARD_HEADER
STANDARD_HEADER
FORM STANDARD_HEADER.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
CASE V_HEAD.
WHEN 'Summary Report'(001).
WHEN 'SUCC_REPORT'.
**---To display the field headings for Success report.
ULINE (154).
WRITE : /001 SY-VLINE,
002 'Header Details '(011),
052 SY-VLINE,
053 'Document Number'(036),
154 SY-VLINE.
ULINE (154).
WHEN 'Error Report'.
**---To display the field headings for error report.
ULINE (154).
WRITE : /001 SY-VLINE,
002 'Header Details '(011),
052 SY-VLINE,
053 'Error Message/Text'(035),
154 SY-VLINE.
ULINE (154).
ENDCASE.
ENDFORM. " STANDARD_HEADER
*& Form DISPLAY_REPORT
Display Report Details
FORM DISPLAY_REPORT.
PERFORM SUMMARY_REPORT.
PERFORM SUCC_REPORT.
PERFORM ERROR_REPORT.
ENDFORM. " DISPLAY_REPORT
*& Form SUMMARY_REPORT
Success & Error Count Number
FORM SUMMARY_REPORT.
WRITE : /030 SY-TITLE.
SKIP 1.
WRITE : /005 'Program Name : '(032),
024 SY-REPID,
080 'Date :'(033),
088 SY-DATUM.
SKIP 1.
V_HEAD = 'Summary Report'(001).
ULINE (132).
WRITE : /1 SY-VLINE,
5 'No. of Records read from the Data file'(014),
45 ':', V_TOTAL LEFT-JUSTIFIED,
132 SY-VLINE,
/1 SY-VLINE,
5 'No. of Records successfully posted'(015),
45 ':', V_SUCCESS_COUNTER LEFT-JUSTIFIED,
132 SY-VLINE,
/1 SY-VLINE,
5 'No. of Records Failed'(023),
45 ':'(031), V_ERROR_COUNTER LEFT-JUSTIFIED,
132 SY-VLINE.
IF NOT F_BDC_OPEN IS INITIAL.
WRITE: /1 SY-VLINE,
5 'Session Name'(022),
45 ':'(031), C_SESSION_NAME LEFT-JUSTIFIED,
132 SY-VLINE.
ENDIF.
ULINE (132).
IF NOT F_BDC_OPEN IS INITIAL.
WRITE: /1 SY-VLINE,
5 'Session Name'(022),
45 ':'(031), C_SESSION_NAME LEFT-JUSTIFIED,
132 SY-VLINE.
ENDIF.
ULINE (132).
ENDFORM. " SUMMARY_REPORT
*& Form ERROR_REPORT
Error Report
FORM ERROR_REPORT.
IF NOT I_ERROR_LOG[] IS INITIAL.
SORT I_ERROR_LOG. " by tcode.
V_HEAD = 'Error Report'(013).
NEW-PAGE.
LOOP AT I_ERROR_LOG.
WRITE: /001 SY-VLINE,
002 I_ERROR_LOG-HEADER,
052 SY-VLINE,
053 I_ERROR_LOG-MSG,
154 SY-VLINE.
ULINE (154).
ENDLOOP.
ENDIF.
ENDFORM. " ERROR_REPORT
*& Form ERROR_REPORT
Success Report
FORM SUCC_REPORT.
IF NOT I_SUCC[] IS INITIAL.
SORT I_SUCC. " by tcode.
V_HEAD = 'SUCC_REPORT'(034).
NEW-PAGE.
LOOP AT I_SUCC.
WRITE: /001 SY-VLINE,
002 I_SUCC-HEADER,
052 SY-VLINE,
053 I_SUCC-MSG,
154 SY-VLINE.
ULINE (154).
ENDLOOP.
ENDIF.
ENDFORM. " SUCC_REPORT
*& Form OPEN_SESSION
FORM OPEN_SESSION.
DATA : V_DATE LIKE SY-DATUM. " For Hold Date.
V_DATE = SY-DATUM - 1. " Hold date
V_UNAME = SY-UNAME. " User name
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = C_SESSION_NAME
HOLDDATE = V_DATE
KEEP = 'X'
USER = V_UNAME
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'Session can not be opened'(019).
STOP.
ENDIF.
F_BDC_OPEN = 'X'.
ENDFORM. " OPEN_SESSION
*& Form BDC_INSERT
FORM BDC_INSERT USING P_TCODE TYPE ANY.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = P_TCODE
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'Unable to insert, Error record'(037).
STOP.
ENDIF.
ENDFORM. " BDC_INSERT
*& Form CLOSE_GROUP
FORM CLOSE_GROUP.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'Session can not be closed'(021).
STOP.
ENDIF.
ENDFORM. " CLOSE_GROUP
*& Form UPLOAD_DATA
Upload Data From the text file
FORM UPLOAD_DATA.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_FNAME
FILETYPE = 'DAT'
TABLES
DATA_TAB = P_DOWNLOAD
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
OTHERS = 10.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'File does not Exist'(003).
ELSEIF P_DOWNLOAD[] IS INITIAL.
MESSAGE E000 WITH 'Input file is empty'(004).
ENDIF.
DATA: V_INDEX LIKE SY-TABIX.
IF NOT P_DOWNLOAD[] IS INITIAL.
LOOP AT P_DOWNLOAD.
V_INDEX = SY-TABIX.
*Removing double quotes
DO.
REPLACE '"' WITH '' INTO P_DOWNLOAD.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
ENDDO.
MODIFY P_DOWNLOAD INDEX V_INDEX.
CONDENSE P_DOWNLOAD.
IF P_DOWNLOAD(1) = '1'.
*Finding the header information, creating key field
V_SELNO = SY-TABIX.
ENDIF.
WE ARE NOT HAVING KEY FIELD IN HEADER/ITEM IN THE FILE.
SO WE ARE CREATING MANUAL KEY FIELD IN INTERNAL TABLE (SELNO).
IF P_DOWNLOAD(1) = '1'.
Moving header information into IT_DATA_HEADER Internal Table
SPLIT P_DOWNLOAD AT ',' INTO
IT_DATA_HEADER-ID
IT_DATA_HEADER-BUKRS
IT_DATA_HEADER-WAERS
IT_DATA_HEADER-NEWKO
IT_DATA_HEADER-XBLNR
IT_DATA_HEADER-XBLNR1
IT_DATA_HEADER-BLDAT
IT_DATA_HEADER-PK
IT_DATA_HEADER-WRBTR
IT_DATA_HEADER-BKTXT
IT_DATA_HEADER-BKTXT1.
IT_DATA_HEADER-SELNO = V_SELNO.
CONDENSE : IT_DATA_HEADER-ID, IT_DATA_HEADER-BUKRS,
IT_DATA_HEADER-WAERS, IT_DATA_HEADER-NEWKO,
IT_DATA_HEADER-XBLNR, IT_DATA_HEADER-XBLNR1,
IT_DATA_HEADER-BLDAT, IT_DATA_HEADER-PK,
IT_DATA_HEADER-WRBTR, IT_DATA_HEADER-BKTXT,
IT_DATA_HEADER-BKTXT1, IT_DATA_HEADER-SELNO.
APPEND IT_DATA_HEADER.
CLEAR IT_DATA_HEADER.
ELSEIF P_DOWNLOAD(1) = '2'.
Moving header information into IT_DATA_ITEM Internal Table
SPLIT P_DOWNLOAD AT ',' INTO
IT_DATA_ITEM-ID
IT_DATA_ITEM-NEWKO
IT_DATA_ITEM-BUKRS
IT_DATA_ITEM-KOSTL
IT_DATA_ITEM-WRBTR
IT_DATA_ITEM-SGTXT.
IT_DATA_ITEM-SELNO = V_SELNO.
IT_DATA_ITEM-SELNO1 = SY-TABIX.
CONDENSE: IT_DATA_ITEM-ID,IT_DATA_ITEM-NEWKO,IT_DATA_ITEM-BUKRS,
IT_DATA_ITEM-KOSTL,IT_DATA_ITEM-WRBTR,
IT_DATA_ITEM-SGTXT,IT_DATA_ITEM-SELNO,
IT_DATA_ITEM-SELNO1.
APPEND IT_DATA_ITEM.
CLEAR IT_DATA_ITEM.
ENDIF.
ENDLOOP.
*SORT HEADER & ITEM INTERNAL Table
SORT IT_DATA_HEADER BY SELNO.
SORT IT_DATA_ITEM BY SELNO SELNO1.
*Header Information
LOOP AT IT_DATA_HEADER.
IT_FINAL_HEADER-ID = IT_DATA_HEADER-ID.
IT_FINAL_HEADER-BUKRS = IT_DATA_HEADER-BUKRS.
IT_FINAL_HEADER-WAERS = IT_DATA_HEADER-WAERS.
IT_FINAL_HEADER-NEWKO = IT_DATA_HEADER-NEWKO.
CONCATENATE IT_DATA_HEADER-XBLNR IT_DATA_HEADER-XBLNR1
INTO IT_FINAL_HEADER-XBLNR.
IT_FINAL_HEADER-BLDAT = IT_DATA_HEADER-BLDAT.
IT_FINAL_HEADER-PK = IT_DATA_HEADER-PK.
IT_FINAL_HEADER-WRBTR = IT_DATA_HEADER-WRBTR.
IT_FINAL_HEADER-BKTXT = IT_DATA_HEADER-BKTXT.
IT_FINAL_HEADER-BKTXT1 = IT_DATA_HEADER-BKTXT1.
IT_FINAL_HEADER-SELNO = IT_DATA_HEADER-SELNO.
APPEND IT_FINAL_HEADER.
CLEAR IT_FINAL_HEADER.
ENDLOOP.
*Item Information
LOOP AT IT_DATA_ITEM.
CHECKING ZERO IN THE IT_DATA_ITEM-WRBTR FIELD
It will not append the IT_FINAL_ITEM
V_CHECK_ZERO = IT_DATA_ITEM-WRBTR.
IF V_CHECK_ZERO NE V_CHECK_ZERO1. "V_ZERO.
IT_FINAL_ITEM-ID = IT_DATA_ITEM-ID.
IT_FINAL_ITEM-NEWKO = IT_DATA_ITEM-NEWKO.
IT_FINAL_ITEM-BUKRS = IT_DATA_ITEM-BUKRS.
IT_FINAL_ITEM-KOSTL = IT_DATA_ITEM-KOSTL.
IT_FINAL_ITEM-WRBTR = IT_DATA_ITEM-WRBTR.
IT_FINAL_ITEM-SGTXT = IT_DATA_ITEM-SGTXT.
IT_FINAL_ITEM-SELNO = IT_DATA_ITEM-SELNO.
IT_FINAL_ITEM-SELNO1 = IT_DATA_ITEM-SELNO1.
APPEND IT_FINAL_ITEM.
CLEAR IT_FINAL_ITEM.
CLEAR : V_CHECK_ZERO,V_CHECK_ZERO1.
ENDIF.
ENDLOOP.
SORT IT_FINAL_HEADER BY SELNO.
SORT IT_FINAL_ITEM BY SELNO.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form MOVE_DATA_F43
Call Transaction F-43
FORM MOVE_DATA_F43.
*MOVE THE SYSTEM DATE TO
CLEAR V_SYSTEMDATE.
V_SYSTEMDATE = SY-DATUM.
LOOP AT IT_FINAL_HEADER.
CLEAR V_CHECK.
V_CHECK = IT_FINAL_HEADER-SELNO.
MOVE HEADER DATA TO BDCDATA INTERNAL TABLE
PERFORM BDC_BUILD_HEADER.
MOVE ITEM DATA TO BDCDATA INTERNAL TABLE
PERFORM BDC_BUILD_ITEM.
<b>* Call Transcation (F-43)
CALL TRANSACTION 'F-43' USING IT_BDCDATA
MODE XMODE
UPDATE 'S'
MESSAGES INTO IT_MESSAGE_TAB.</b>
IF error record found, it will move to batch Input session
IF SY-SUBRC <> 0.
V_ERROR_COUNTER = V_ERROR_COUNTER + 1. " Inc the counter
CLEAR V_LINES.
DESCRIBE TABLE IT_MESSAGE_TAB LINES V_LINES.
READ TABLE IT_MESSAGE_TAB INDEX V_LINES.
*--- <b>Perform to read the messages
PERFORM MESSAGE_FORMAT.</b>*--- Appending the error records into error table
CONDENSE IT_FINAL_HEADER-BUKRS.
CONDENSE IT_FINAL_HEADER-NEWKO.
CONDENSE IT_FINAL_HEADER-XBLNR.
CONDENSE IT_FINAL_HEADER-BLDAT.
CONCATENATE IT_FINAL_HEADER-BUKRS ','
IT_FINAL_HEADER-NEWKO ','
IT_FINAL_HEADER-XBLNR ','
IT_FINAL_HEADER-BLDAT
INTO V_HEADER.
I_ERROR_LOG-HEADER = V_HEADER.
I_ERROR_LOG-MSG = V_MSG.
APPEND I_ERROR_LOG.
CLEAR I_ERROR_LOG.
*-- Posting the error record to Session
IF F_BDC_OPEN IS INITIAL.
PERFORM OPEN_SESSION.
ENDIF.
PERFORM BDC_INSERT USING 'F-43'.
ELSE.
V_SUCCESS_COUNTER = V_SUCCESS_COUNTER + 1.
*-- READING ONLY SUCCESS MESSAGE(MSGNR 312)
LOOP AT IT_MESSAGE_TAB WHERE MSGNR = '312'.
V_SUCC_MSG = IT_MESSAGE_TAB-MSGV1.
ENDLOOP.
*--- Perform to read the messages
PERFORM MESSAGE_FORMAT.
*--- Appending the Success records into Success table
CONDENSE IT_FINAL_HEADER-BUKRS.
CONDENSE IT_FINAL_HEADER-NEWKO.
CONDENSE IT_FINAL_HEADER-PK.
CONDENSE IT_FINAL_HEADER-XBLNR.
CONDENSE IT_FINAL_HEADER-BLDAT.
CONCATENATE IT_FINAL_HEADER-BUKRS ','
IT_FINAL_HEADER-NEWKO ','
IT_FINAL_HEADER-PK ','
IT_FINAL_HEADER-XBLNR ','
IT_FINAL_HEADER-BLDAT
INTO V_HEADER.
I_SUCC-HEADER = V_HEADER.
I_SUCC-MSG = V_SUCC_MSG.
APPEND I_SUCC.
CLEAR I_SUCC.
ENDIF.
V_TOTAL = V_TOTAL + 1.
REFRESH: IT_BDCDATA,
IT_MESSAGE_TAB.
CLEAR: IT_BDCDATA,
IT_MESSAGE_TAB.
ENDLOOP.
ENDFORM. " MOVE_DATA_F43
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
*& Form BDC_BUILD_HEADER
Header Information
FORM BDC_BUILD_HEADER.
Header Details
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0100'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_FIELD USING 'BKPF-BLDAT'
IT_FINAL_HEADER-BLDAT.
PERFORM BDC_FIELD USING 'BKPF-BLART'
'KR'.
PERFORM BDC_FIELD USING 'BKPF-BUKRS'
IT_FINAL_HEADER-BUKRS.
Moveing System date to Posting date in the document
CLEAR IT_FINAL_HEADER-BLDAT.
CONCATENATE V_SYSTEMDATE4(4) V_SYSTEMDATE0(4)
INTO IT_FINAL_HEADER-BLDAT.
PERFORM BDC_FIELD USING 'BKPF-BUDAT'
IT_FINAL_HEADER-BLDAT.
PERFORM BDC_FIELD USING 'BKPF-WAERS'
IT_FINAL_HEADER-WAERS.
PERFORM BDC_FIELD USING 'BKPF-XBLNR'
IT_FINAL_HEADER-PK.
PERFORM BDC_FIELD USING 'BKPF-BKTXT'
IT_FINAL_HEADER-BKTXT.
PERFORM BDC_FIELD USING 'FS006-DOCID' '*'.
IF IT_FINAL_HEADER-WRBTR CA '-'.
REPLACE '-' WITH SPACE INTO IT_FINAL_HEADER-WRBTR.
CONDENSE IT_FINAL_HEADER-WRBTR.
PERFORM BDC_FIELD USING 'RF05A-NEWBS' '25'.
ELSE.
PERFORM BDC_FIELD USING 'RF05A-NEWBS' '31'.
ENDIF.
PERFORM BDC_FIELD USING 'RF05A-NEWKO'
IT_FINAL_HEADER-NEWKO.
*-- Item Vendor Details
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0302'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'BSEG-WRBTR'
IT_FINAL_HEADER-WRBTR.
PERFORM BDC_FIELD USING 'BSEG-SGTXT'
IT_FINAL_HEADER-BKTXT1.
ENDFORM. " BDC_BUILD_HEADER
*& Form BDC_BUILD_ITEM
Item Information
FORM BDC_BUILD_ITEM.
DATA L_FIRST TYPE C.
LOOP AT IT_FINAL_ITEM WHERE SELNO = V_CHECK.
IF L_FIRST IS INITIAL.
L_FIRST = C_X.
Line Item ( PstKy,Account & New Company Code)
CONDENSE IT_FINAL_HEADER-BLDAT.
IF IT_FINAL_ITEM-WRBTR CA '-'.
REPLACE '-' WITH SPACE INTO IT_FINAL_ITEM-WRBTR.
CONDENSE IT_FINAL_ITEM-WRBTR.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0302'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' '/00',
'RF05A-NEWBS' '50',
'RF05A-NEWKO' IT_FINAL_ITEM-NEWKO,
'RF05A-NEWBK' IT_FINAL_ITEM-BUKRS.
ELSE.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0302'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' '/00',
'RF05A-NEWBS' '40',
'RF05A-NEWKO' IT_FINAL_ITEM-NEWKO,
'RF05A-NEWBK' IT_FINAL_ITEM-BUKRS.
ENDIF.
Amount & Text
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0300'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' '/00',
'BSEG-WRBTR' IT_FINAL_ITEM-WRBTR,
'BSEG-SGTXT' IT_FINAL_ITEM-SGTXT,
'DKACB-FMORE' 'X'.
Cost Center
PERFORM BDC_DYNPRO USING 'SAPLKACB' '0002'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' 'ENTE',
'COBL-KOSTL' IT_FINAL_ITEM-KOSTL.
ELSE.
Line Item ( PstKy,Account & New Company Code)
IF IT_FINAL_ITEM-WRBTR CA '-'.
REPLACE '-' WITH SPACE INTO IT_FINAL_ITEM-WRBTR.
CONDENSE IT_FINAL_ITEM-WRBTR.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0300'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' '/00',
'RF05A-NEWBS' '50',
'RF05A-NEWKO' IT_FINAL_ITEM-NEWKO,
'RF05A-NEWBK' IT_FINAL_ITEM-BUKRS.
ELSE.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0300'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' '/00',
'RF05A-NEWBS' '40',
'RF05A-NEWKO' IT_FINAL_ITEM-NEWKO,
'RF05A-NEWBK' IT_FINAL_ITEM-BUKRS.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLKACB' '0002'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' 'ENTE'.
Amount & Text
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0300'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' '/00',
'BSEG-WRBTR' IT_FINAL_ITEM-WRBTR,
'BSEG-SGTXT' IT_FINAL_ITEM-SGTXT,
'DKACB-FMORE' 'X'.
Cost Center
PERFORM BDC_DYNPRO USING 'SAPLKACB' '0002'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' 'ENTE',
'COBL-KOSTL' IT_FINAL_ITEM-KOSTL.
ENDIF.
ENDLOOP.
*Save Details
PERFORM BDC_DYNPRO USING 'SAPMF05A' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BU'.
PERFORM BDC_DYNPRO USING 'SAPLKACB' '0002'.
PERFORM BDC_FIELD USING: 'BDC_OKCODE' 'ENTE'.
ENDFORM. " BDC_BUILD_ITEM
Thanks
Mahesh -
In call transaction how can we handle error records.
hai..tellme how can we handle error records in call transaction..we can get error records into one flatfile ok...then we have to execute the same bdc program with dat flat file (error records) once again...is it wright ..
Hi,
check this program u will get idea
seee this prog. its will help u .
copy and run this prog.
TYPES : BEGIN OF t_disp ,
vendorno(9),
compcc(13),
purchorg(14),
accgroup(15),
title(7),
name(5),
country(8),
ordcurr(14),
END OF t_disp.
TYPES : BEGIN OF t_err,
msgtyp LIKE bdcmsgcoll-msgtyp,
l_mstring(250),
END OF t_err.
DATA: i_disp TYPE STANDARD TABLE OF t_disp,
wa_disp TYPE t_disp,
i_err TYPE STANDARD TABLE OF t_err,
wa_err TYPE t_err.
data definition
Batchinputdata of single transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
error session opened (' ' or 'X')
DATA: e_group_opened.
message texts
TABLES: t100.
PARAMETER : p_file1 LIKE ibipparms-path,
p_cmode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
*selction screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file1.
AT SELECTION-SCREEN ON p_file1.
IF p_file1 IS INITIAL.
MESSAGE 'FILE IS NOT FOUND' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM f_disp_file1.
END-OF-SELECTION.
PERFORM f_disp_errs.
*& Form F_DISP_FILE1
text
--> p1 text
<-- p2 text
FORM f_disp_file1 .
DATA: l_filename1 TYPE string.
MOVE p_file1 TO l_filename1.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_filename1
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = i_disp
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*? prepare BDC data
DELETE i_disp INDEX 1.
LOOP AT i_disp INTO wa_disp .
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_disp-vendorno.
'ztest_1'.
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_disp-compcc.
'0001'.
PERFORM bdc_field USING 'RF02K-EKORG'
wa_disp-purchorg.
'0001'.
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_disp-accgroup.
'0001'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_disp-title.
'Mr.'.
PERFORM bdc_field USING 'LFA1-NAME1'
wa_disp-name.
'test name'.
PERFORM bdc_field USING 'LFA1-SORTL'
'TEST NAME'.
PERFORM bdc_field USING 'LFA1-LAND1'
wa_disp-country.
'in'.
PERFORM bdc_field USING 'LFA1-SPRAS'
'en'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-AKONT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPDA'.
PERFORM bdc_field USING 'LFM1-WAERS'
wa_disp-ordcurr.
'inr'.
PERFORM bdc_transaction USING 'XK01'.
WRITE:/ WA_DISP-VendorNo,
WA_DISP-COMPCC,
WA_DISP-PURCHORG,
WA_DISP-ACCGROUP,
WA_DISP-title,
WA_DISP-name,
WA_DISP-country,
WA_DISP-ORDCURR.
CLEAR: wa_disp.
REFRESH bdcdata.
ENDLOOP.
ENDFORM. " F_DISP_FILE1
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF FVAL NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form bdc_transaction
text
-->P_0322 text
FORM bdc_transaction USING tcode.
DATA: l_mstring(480),
l_subrc LIKE sy-subrc.
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
MODE p_cmode
UPDATE 'L'
MESSAGES INTO messtab.
l_subrc = sy-subrc.
IF SMALLLOG 'X'.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
LOOP AT messtab.
SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
AND arbgb = messtab-msgid
AND msgnr = messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / messtab-msgtyp, l_mstring(250).
*? Send this errors to err internal table
wa_err-msgtyp = messtab-msgtyp.
wa_err-l_mstring = l_mstring.
APPEND wa_err TO i_err.
ELSE.
WRITE: / messtab.
ENDIF.
CLEAR: messtab, wa_err.
ENDLOOP.
SKIP.
ENDIF.
ENDFORM. " bdc_transaction
*& Form f_disp_errs
text
--> p1 text
<-- p2 text
FORM f_disp_errs .
SORT i_err BY msgtyp.
LOOP AT i_err INTO wa_err.
AT FIRST.
WRITE : / text-002.
ULINE.
ENDAT.
AT NEW msgtyp.
IF wa_err-msgtyp = 'S'.
WRITE : / text-003.
ULINE.
ELSEIF wa_err-msgtyp = 'E'.
WRITE : / text-001.
ULINE.
ENDIF.
ENDAT.
WRITE : / wa_err-msgtyp, wa_err-l_mstring.
CLEAR wa_err.
ENDLOOP.
ENDFORM. " f_disp_errs
Regards -
Call transaction (MF60) with variant
hi
in user will save some variant of the TCODE : MF60, and will put they in job what use SM36 to set job schedule.but the resule message can't be know in BG work.
i want to write a report to run the Transaction (MF60) and to save message with abap application log.
first:
how to find the Transaction contain variant?
second:
if i use abap code: CALL transaction in report,how to set variant to transaction.
three:
i know the command:SUBMIT will call from VARIANT:
but MF60's report is RMPU_SEL_SCREEN,but this report have two transaction: MF60,MF63.
how to set Transaction to this RMPU_SEL_SCREEN.
four:
i know the SM36 will set variant to TCODE,how to open job in ABAP.
thank you very much!in my company,users will create themselves varaints about MF60.
and they put variants in job schedule (use SM36 ) in bg work at night.
so when these job is over,the last message don't show for they.
they doubt about it and they will spent lot time to get what oneself document for last genearate.
i want to write a report and put this report in job schedule to run MF60.
and get last message for call transaction in abap appliacation log.
next day users just use TCODE SLG1 to view last night run MF60 result.
so first i must get all MF60 of variant what will be run and get message
when this transancations is over.save message in database!
thank you very much for your help!
Maybe you are looking for
-
Until this gets resolved we can't access iPhoto or my iPhoto library. Unfortunately didn't back up my photos before we "upgraded" to Yosmite. Any ideas?
-
Basic question on setting Redundancy as the Retention policy
DB version:11g I am planning to implement Differential Incremental Backup for my database. My strategy is Sunday --> Level 0 backup Monday --> Level 1 backup Tuesday--> Level 1 backup Wednesday--> Level 1 backup Thursday--> Level
-
Vertical thin blue line on LCD
Is there an easy fix to get rid of this line on my screen? it's about 3 inches in from the left of the edge of the screen, running the full-length top-to-bottom. Any info would be appreciated. Thanks.
-
Dear Experts I need to find out what table stores the information for Selection Conditions in RSA1 > right-mouse-click on cube> Manage . Its now invisible even though invisibility is not turned on. Please advise. Thanks. regards Pascal
-
Error Code -1 Returned by core audio driver-Please help!
I can't open GB3, each time I try, it gives this message error: Error Code -1 Returned by core audio driver What can I do? Intel 2.16, OS: Leopard, and I use Guitar Rig 2 which work fine.