Warning message in ITS MOBILE

Hello,
In ITS Mobile after entering user name and password it takes me to LM00 transaction.
But before LM00 transaction is displayed I get 4 warning messages. I need to press OK/Close for each message. The same warning message appears when I move between transaction in the RF Menu also. I don't get any warning message if I test the same in the internet explorer in desktop.
Below is the warning message displayed:
Warning message u2018Microsoft Jscript runtime error, Line:304, Character:1, Error: Object doesnu2019t support this property or method, Source :(Null)u2019
I use handheld MC9090 with Windows Mobile 5.
Regards,
Karthik

Hello Karthik,
Is the logon screen the ITSmobile logon screen? It sounds like your system is configured to use the standard logon, which would result in a javascript error on some mobile browsers. Please go to SICF and make sure that your service's settings are the same as for the itsmobile00 service.
Edgar

Similar Messages

HT1926 Installing iTunes 11.1.4 on windows XP issues warning message: Service "Apple Mobile Device' failed to start. starting iTunes shows MSVCR80.dll not found.

Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
I install from iTunes.com. Install issues the messages:
Service "Apple Mobile Device' failed to start.
Verify that you have sufficient privileges to start system services
I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
iTunes was not installed correctly.
Please reinstall iTunes
Error 7 (Windows error 126)
Tring to start iTunes from desktop gives:
This application failed to start because MSVCR80.dll was not found
Re-installing the application may fix the problem.
Further repair or remove/reinstall does not fix the problem (including after reboot)
Thie is the first time this has happened. I'm not sure where to go from here
Thanks for any help.

Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
Apple Application Support
Apple Mobile Device Support
Aple Sortware Update
Bonjour
iTunes
Reboot and install/

I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?

I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?

If you don't get an answer here, ask in the forums devoted to MS stuff:
http://answers.microsoft.com/en-us/mac/forum/macexcel

Publish warning message in SRM ITS

Hello Friends
We are implementing SRM 5.0 & want to publish warning message in SRM ITS.
Could anybody guide me how we can do it for web browser.

Hello Soumik,
Do your check - according to your function rule(s) - in method BBP_DOC_CHECK from BAdI BBP_DOC_CHECK_BADI for object type BUS2200.
Then, populate or not exporting table ET_MESSAGES with blocking or warning message: this message will be displayed at user's bottom screen.
Regards.
Laurent.

SSIS package fails with the error as given below. But its warning messages are incorrect.

My SSIS package loads data from access database to SQL Server database.
It's a straight copy. It fails with the below warnings and error message as shown below:
Error messages:
[OLE DB Source [113]] Error: There was an error with OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID] on OLE DB Source.Outputs[OLE DB Source Output]. The column status returned was: "Text was truncated or one or more characters had no
match in the target code page.".
[OLE DB Source [113]] Error: The "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]" failed because truncation occurred, and the truncation row disposition on "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]"
specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
There are 3 warning messages even before I run the package. Warnings are all about the mismatch between the source and destination column sizes.
I cross checked the source and destination column sizes. The destination column sizes are fairly high than the source column sizes.
It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Thank you.

It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Please check if the dev destination table has same column data types and size as compared with pre prod table
Thanks, hsbal

ITS (mobile) login without popup

Hi folks,
I have implemented ITSmobile, and it works fine except for one detail: the login procedure.
When I create my ICF service as described in SAP Help (CL_MOBILE_SYSTEM_LOGIN as login class), I always have to login twice to my service (first on the webpage, then I receive a popup, and I have to login again, and then I can enter my ITS Mobile transaction).
I've toyed with the 'L (alternative)' procedure on the Logon Data tab, and the only way I don't get the popup seems to be when I set 'Fields Authentication' as the only authentication procedure. (together with 'X - do not switch') under system login. However, if I do this, I get the message that System Login is not possible because some entries are missing in the alternative procedure.
I can't find the necessary information about ITS login procedures and it bothers me that I can't seem to get this right.
So if anyone can share with me how they have setup ITS Mobile login, or knows anything about the different options, please let me know. Thanks in advance.
Rob

Edgar,
Thanks, but that's what I did.
However, I'd like to know more about the different options and why all other options use a popup. The main concern about the option I've chosen now (fields authentication) is that it gives a warning message (even though you can log on fine), and that looks quite unprofessional (you also can't disable it, apparently).

How to remove the warning messages in CODE INSPECTOR of my report......?

Hi All,
I am trying to do the check to my program i.e CODE INSPECTOR. i am seeing the following warning messages below.
1 warning message
Program zraj0xxx include zraj0xxx row 000083 Column0000
%LINR-VBUP contains a hyphen
(The Hyphen is used as a dereferencing operator! )
Note: when i double click on the above message its taking me to the below code of my program.
DATA %COUNT-VBUP(4) TYPE X.
DATA %LINR-VBUP(2).
TABLES VBPA.
DATA %COUNT-VBPA(4) TYPE X.
DATA %LINR-VBPA(2).
2 warning message
Program zraj0xxx include zraj0xxx row 000079 Column0000
Field string VLPMA is not referenced statically in the program
Note: when i double click on the above message its taking me to the below code of my program.
SELECTION-SCREEN: BEGIN OF BLOCK PROG
                           WITH FRAME TITLE TEXT-F58.
TABLES: VLPMA,
              VLKPA.
TABLES VBUP.
3 warning message
Program zraj0xxx include zraj0xxx row 000001 Column0000
TEXT- GOH from the text pool is not used.
Note: when i double click on the above message its taking me to the below code of my program.
REPORT ZHYD0147 LINE-SIZE 255 NO STANDARD PAGE HEADING
   MESSAGE-ID ZB
   LINE-COUNT 065(001).
Thanks in advance.
Rajesh.

Hi Rajesh,
First warning message.
DATA %COUNT-VBUP(4) TYPE X.
DATA %LINR-VBUP(2).
TABLES VBPA.
DATA %COUNT-VBPA(4) TYPE X.
DATA %LINR-VBPA(2).
Here you are not supposed to use hyphen but instead use '_'.
Second warning message
Program zraj0xxx include zraj0xxx row 000079 Column0000
Field string VLPMA is not referenced statically in the program
That means you are not using this VLPMA any where in your program so bettr delete fromt he Top Include.
Note: when i double click on the above message its taking me to the below code of my program.
Third warning message
Program zraj0xxx include zraj0xxx row 000001 Column0000
TEXT- GOH from the text pool is not used.
this also means that you are not using this Text elemnt anywhere of your program.So delete this one also.
Thanks
Rohini.

Warning message in mir4 while posting

hi friends ,
In miro while we post the parked document then it display the warning message as "RG23 Part II posting not yet done" , when we click on enter , the document is posting . But the user wants that as an error message not the warning message. So please tell me in what way i can get the solution.
with regards,
prasad.

Hi
1. Setting up Vendor/Customer is OK to get net balance as you said
2. Spl GL account to track share capital also seems OK
3. For grants, there is a specific functionality under PSM (Public Sector Management) component of FSCM... I guess, this is added in EhP4.. I am not sure if it was there earlier as well
Fund Mngt can also be tried for funds mngt, but am not too sure... Its better to use the specific functionality
4. Regarding budgeting in CO, it can not be on individual GL accounts.. To have budget on GL accounts, you need to activate Funds MNgt.... Std budgetary control in CO is @ Internal Order Level
Regards
Ajay M

Warning Message in query result as 'Notification Number DBMAN 345'

Hi ,
I have a warning message while executing the query
'Diagnosis
Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read.
There is a restriction on a navigation attribute of the listed characteristic in the query. This filters all characteristic values of the master-data bearing characteristic for which there is not yet master data out of the result.
For performance reasons, this filtering is unavoidable.
System Response
Procedure
In case of doubt, find other restirctions directly on the characteristic values of the characteristics contained in the DataStore object.
Procedure for System Administration
Notification Number DBMAN 345 '
'i am getting this error because of cutomer exit variables on navigatioanl attributes of Omaterial'
I tried supressing it in RSRT.. but unable to find the message.
I tried debugging and assigning enhancement points in FM BAL_LOG_MSG_READ.. As it is standard function module its not suggestable to do..
can we creat custom FM ?? will it be called if we write code to supress warning message??
Please let me know how to use BADI'S in order to supress the error message that appearing in query result?
Thanks All.

Hi,
The warning is raised due to the following reasons:
- you have a selection in the filter of a navigation attribute
- in your DSO you do not use the option "SIDs Generation upon Activation"
If the option "SIDs Generation upon Activation" is not flagged,
you may get char.values for an Infoobject in the system not
having any SIDs. As a result you may see in the report less data as
expected.
For example we have Infoobject A with its Nav.attribute B
Infoobject A   Nav.attribute B
12             13   ->> has a SID in the X-table
11             10
9              13   ->> has no SID in the X-table
If you define a selection on B =13 in the query, you only get infoobject
A with key 12 displayed in the result, since only B =13 has a SID
in the relevant X-table.
The warning refers to this behaviour and cannot be avoided unless you:
   - flag the option in the ODS-settings
   - or remove the filter defined on 0MATERIAL__xxxx
Thanks,
Venkat

Warning message in VT01 or 02n Shipment completion

II am trying to create a warning message when Pressing the Shipment completion button in VT01 or 02n Transaction.
Standard Activity profile does not have any area to enter a custom Formula or Routine that will help the developer to enter the logic. Also I donu2019t want to use output type to trigger work flow that will call the required program - it will be too data heavy.
Case: We use a Packaging Unit that basically is used to determine the Total, tare and loaded weight (HU in Shipments). The delivery assigned to the Shipment has its item QTY which should be within the Loaded weight of the handling unit. Hence need some sort of pop up or warning message that will inform on Shipment completion u2013 any help or ideas

Best option here is to use user exit in shipment to create pop up.
Hope it helps.

Warning message in Transaction VF31

Hi,
I want a warning message in transaction VF31 and my system is ECC 5.0.
I couldnt locate any billing exit.
Is it possible to throw a warning message in this case?

Hi Ronaldo
I do agree that it is a standard program and that is why Copying of standard program to Z program and assignment of that Z program will be correctly done my the Technical consultants . So its better to take help of the technical consultants So that we wont face any problem when we run VF31 again after changing the program
Regards
Srinath

Report on Warning Message in sales order

I have configured in OVA8 such that it only gives a "Warning Message" and does not block the sales order.
Because these sales order are not blocked they don't need to be released. I need a report on list of sales order where warning messages have appeared for credit limit exceed.
As its only warning message and not erro, it needn't be released so VKM1, VKM2 & VKM4 doesn't solve the issue.

Hi,
It is not possible to get the report as you required in Std. System considers the sales order if the warning msg appears as same as a normal SO without any warnign msg. In status level (table VBUK) there won't be any change.
If you need it deliberately, then you shall take help from ABAp to develop a Z-report that too you need to use some sales order level user exit to capture the warning message(Message no. V1152) generated sales order no.s and then you can use the same info in Z-report.
Hope this helps..
Reg,
JJ
Edited by: Jagsap on Apr 14, 2010 1:22 PM

Warning message in a report throwing out completely

Hi All,
I have areport in which a warning message is getting generated inside standard fm .
Its coming inside a FM which inturn is turn call some other FM and so on ,so its not throwing any exception to catch it.
When the warning message is coming the report is completely throwing us out,its not continuing if you press enter after warning.
The FM which I am calling in the start of selection event of my program is RMXM951_RECIPE_TRANSFORM_START.
This FM inturn is calling FM MRTRS965_BOM_GENERATION in this we after some points its calling the PERFORM create_bom.
The warning message is coming inside this perform.
The report is actaully written to convert multiple general receipes to master recepies at a time.
We have standard SAP transaction to acheive this but it does one at a time and not multiple.However the stadard program being module pool the transaction is continuing after the warning message once we press the enter key.
So kinldy let me know how to proceed on this.
Thanks you all very much in advance.
Regards,
Kishore.

Hi Kishore
debugg your program and find out the location where this warning message is coming
and change the code for your warning message.
Like what i did in my one of the program for the same reason.
it was an error message on some validation and it was also throwing me out of the program.
I write:
message 'Invalid Entry' type 'S' display like 'E'.
leave to list processing.
this code displayed my success message like an error message and keep me on the same screen so that I canenter the correct values.
So I think you need to do some thing like that.
Thanks
Lalit Gupta

A warning message in the Inbound part of the IDOC

Hi all,
A warning message is being displayed for the Inbound part of the IDOC.
Here is the message.
No filters , No conversion , No version change .
IDoc successfully processed in the ALE layer
    The IDoc has passed through the ALE layer successfully and can now be
    passed to the application. This transfer is either done online or as a
    background job, depending on the settings in the partner profile.
    If there are no further status records, the IDoc waits for the next run
    of the transfer report to the application.
    Success or failure when passing the IDoc to the application is
    documented in the subsequent status records.
Actions in the ALE layer
    The parameter 'No filters' indicates whether the processing in the ALE
    layer led to segments of the inbound IDoc being omitted. The important
    criteria here are the settings in the segment filter and in the
    distribution model for this sender.
    The parameter 'No conversion' indicates whether field values were
    converted in the ALE layer. This is the case if the IDoc contains
    organizational units to be converted, or if the ALE conversion tool for
    this sender is activated.
    The parameter 'No version change' indicates whether the IDoc was
    converted into an earlier version of the IDoc type. This happens if the
    IDoc type of the sender is different from its own IDoc type.
I have checked all the necessary Config settings and all of them are in place.
Your help on this will be highly appreciated.
- Surya.

Hi,
The IDOC may have successfully passed through the application, but check whether the status of the IDOC is changed to 53.
No filters, No conversions, No version change
occurs when the IDOC is not processed fully.
It may have stopped the processing without raising any error...
Check the program, whether there is any piece of code which stops the processing of the IDOC without changing its status to 51.
Sharin.

Warning message in workbook when execute it

Hi Experts,
When I execute a workbook ,I am receiving below warning message,
Warning: There is a condition on Customer Store ,results row suppress ,active on Customer
Warning: There is a condition on Customer PO Number ,results row suppress ,active on Custom
Warning: There is a condition on Material,results row suppress ,active on DIM1[ZDIM
After I select close warning message,it is excuting and results are shown.Today i automate the report execution.But its ended with ABAP\4 raise exception short dump and job got failed.Pls advice me how to avoid it.

HI Malini,
Run the Queries induvidually in rsrt and suppress the messages in it.
Thne try to run the work Book.
Hope this solves the issue.
Regards.
Shafi.

Warning message in ITS MOBILE

Similar Messages

Maybe you are looking for