Warning message in Solman

Hi
We are getting Warning notification in solution manager saying ' The transport target is not the project transport target. Continue, or Cancel release and change transport target?
COuld you please throw some light on what this Warning is all about and why its been shown suddenly in our Solution Manager system.
Does it has anything to do with the TMS configration  that we do after system refresh as post refresh activity?
regards,
Vinodh.

I had this problem too after Solution Manager upgrade to 7.0 EHP 1. Can someone tell me what is this warning?
Thanks,
Antonello

Similar Messages

  • CCMS issue: "Determining warning messages from CCMS"

    Hi!
    We have a performance problem by accessing of solution in tcode DSWP.
    We retrieve the warning: "Determining warning messages from CCMS"
    In order to solve or analyse this problem I have the following questions:
    1) How collects CEN the data from satelite systems?
    1a)  how? -->  RFC, etc.
    1b) mode? --> Push, Pull, etc.
    2) How the data will be transfered from CEN to tcode DSWP?
    Any helpful information will be appreciated.
    regards
    Thom

    Hi Thom,
    Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
    See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
    You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
    Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
    If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
    Best regards,
    Ruediger

  • Tcode DSWP, Determining warning messages from CCMS

    We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
    We configured SOLMAN as CEN system and activated the CCMSPING with –push option.
    For almost the 2/3 of the systems we configured SAPCCM4X agents.
    Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
    Determining warning messages from CCMS
    It tooks a while and then it is possible to access  the desired solution.
    My important question is of course:
    How can this issue be solved?
    Is there some techniques to analyse and change the problem
    How can I check whether all the agents work in push mode and that we do not use standard CCMS methods that can cause the RFC load? 
    Thank you very much for any helpful information
    Regards
    Thom

    Hi Thom,
    Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
    See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
    You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
    Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
    If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
    Best regards,
    Ruediger

  • CCMS: Determining warning messages from CCMS

    Hi!
    We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
    We configured SOLMAN as CEN system and activated the CCMSPING with –push option.
    For almost the 2/3 of the systems we configured SAPCCM4X agents.
    Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
    Determining warning messages from CCMS
    It tooks a while and then it is possible to enter into the solution.
    My important question is of course:
    How can this issue be solved?
    Is there some techniques to analyse and change the problem
    As I know there are two ways of sending/retrieving the data:
    via RFC (pull)
    via CCMS (push)
    Which method is faster?
    Is there some changes in CCMSPING possible? (interval for sending/retrieving the data)?
    Is there some other settings (likw profile parameters e.g. rdisp/...) that could be performed to solve the problem?
    Thank you very much for any helpful information
    Regards
    Thom

    Hi Thom,
    The CCMSPING agent uses two methods to check availability. One is to connect to the message server using "Ping monitoring" the other method is to check whether you can actually login on the application server and that requires an RFC connection. When you configure Availability monitoring you will see you can configure either or both methods depending on what your requirements are.
    The data is collected and stored in a memory segment reserved for monitoring. The agent connects to this segment on your monitored systems and transfers it to your CEN at the set intervals where it is cached. Edit: sorry if confusing, this method used by sappccm4x agent. CCMSPING connects directly to your application server message service to check availability.
    You keep asking which is faster but as mentioned you may require both methods depending on your requirements.
    Factors like how busy your application servers are(RFC calls require free dialog work processes) and how long the agent should wait before receiving a response will effect the performance which is why you are able to adjust ping timeout and frequency. How many systems are being monitored and how much data is being transfered from those systems is another factor to consider.
    Regards,
    Nelis
    Edited by: Nelis Lamprecht on May 15, 2008 3:11 PM

  • Can anybody identify this warning message?

    It always appear when I'm creating a logical port on my SolMan system. What message should I get from it? Should I do anything to my web service?
    Thank you!

    This is a known issue.
    Contact [email protected] and ask for "Combined muxer" patch.
    Kumar
    Anirudh wrote:
    Hi,
    I am getting following message on my console :
    <Sep 10, 2002 7:12:38 PM GMT+08:00> <Warning> <Posix Performance Pack> <Got exception
    for fd: '123' with no corresponding table entry>
    <Sep 11, 2002 12:40:48 AM GMT+08:00> <Warning> <Posix Performance Pack> <Got exception
    for fd: '151' with no corresponding table entry>
    I have deployed the WL server on HP-UX 11.0 and wlserver version is 6.1 sp2. Could
    anybody explain the warning message ?
    TIA
    Anirudh

  • I am getting a warning message when i am trying to create a host-named sitecollection.

    Hi guys,
          I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
    http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
    When i tried to create a customer root site. I am getting a warning message
    " WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
    Application.  The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
    this port."
    I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
    Can anyone help me to solve. And i wanna know why this error message comes!!!
    Thanks in advance
    Rajendran.

    First, you shouldn't create a host named site collection on a Web app that has host header named.  Doing that implements host names at two different levels and will not work reliably.  Second I'm not sure what you mean when you say you didn't
    use the FQDN but used just the domain name.  A Full url will always be either an FQDN or a shorter Netbios name.  If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url  There is no way
    to use just the domain name.  For example, Contoso.com is the domain name.  Server.contoso.com or WEbsite.contoso.com are FQDNs.  YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
    still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain.  What is the URL for your root site and your host named site?
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Warning message in ALV report

    Hi Experts,
    In ALV report i am getting warning like
    " Field string LS_HEADER is not referenced statically"
    Actually i declared this field as "DATA: ls_header TYPE slis_listheader.".
    How to correct this warning message.
    Thanks in advance.
    Thanks,
    Madhu.

    Dear Madhu,
    You are not using LS_HEADER statically that you have defined in the program. You will get a warning message since you have defined a field that you have not referenced statically.
    Are you using this field dynamically? You can delete/comment the code if you are not using it statically and dynamically.
    Moved the thread ABAP forum. Post your queries in relevant forums to get efficient answers.
    Regards,
    Naveen

  • Warning message in BW Report  through Portal

    Friends,
    I really need your help to remove the waring message.
    For the purpose of changing the description on the Selection screen from “Cost Cetnters (Authorised Values)” to “Funds Centers” I had changed the ZCCTRATI variable description to Funds Centers
    Issue:
    When we open the old report we see the following information message.
    " Value if variable ZCCTRAT1 is automatically converted
    I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
    Can u help me how to remove this ?

    Hi Manohar,
    Edit to add: Here I assume you have a Web Application Designer (WAD) report.
    You can suppress system and warning messages in WAD. Try this and see if it helps.
    - Go to your WAD report
    - In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
    - Click Web Item
    - Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
    Hope this helps,
    Regards,
    Petter
    Message was edited by: M Petter

  • Error message into warning message KO450

    Hi,
    There are  unsettle RA  value in project PAD-9114. Because of  this unsettle RA  value in  the project  we are not able to  close the project and receiving error message like below:
    1.There is still WIP for wbs
    2.Balance of  wbs is not zero.
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    How  to change  above  error message   into warning message so that   it will allow us to  close  the project.
    With regards,
    V.krishnamoorthy

    Hi,
    Thanks  for your answer. But still i am receiving the same error
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    With regards,
    V.krishnamoorthy

  • Standard warning messages in Vendor Request Form

    Hi All,
    Please let us know, how are the standard warning messages in Vendor Request Form while creation/search are displayed.
    For example, I am getting an soft warning message text, at vendor creation which says "Some of the records were not found; for more information, check the log".
    Here we don't have any log traces to be checked for, and we have verified the back end record resultset count which is same, irrelevant of the warning message being shown.
    These messages are displayed only at two places:
    1) The search navigation page, where all the searched record results are displayed and we continue further for creation of vendor workflow.
    2) When the workflow of vendor creation is completed, along with the "Workflow has been completed" success message, this warning message is also shown.
    I want to know, from where these messages are being populated and how to suppress these messages.
    Kindly suggest.
    Thanks in advance!
    Message was edited by: Oxana Noa Zubarev

    Hi All,
    Attaching the screen shot for refernce:
    After we click on "continue with create/edit" button, after few details have been entered, the work flow completes.
    There are we are getting these error message as highlighted above.
    Let me know if any info from my end would help in getting the root cause.
    Thanks in advance.

  • I downloaded Firefox 4.0 onto my Mac but when I try to open it I get a warning message saying "The following disk images couldn't be opened" What do I do now?

    While running Firefox, I got a prompt saying their was an update. I did that, but then got another message saying that it was recommended I update firefox to 4.0. I downloaded it, but never received a prompt to drag the image into my applications folder. I also never saw an image of firefox 4.0 on my desktop. Firefox 4.0 was in my downloads folder but got the above warning message when I clicked on it. I tried downloading it again, but the same thing happened. Now what? It appears that Firefox is still running, although I haven't yet tried to go to another website.

    Try:
    *http://thexlab.com/faqs/resetlaunchservices.html
    * http://guides.macrumors.com/Repairing_Permissions

  • Removing warning messages - PTMW

    Hi,
    I must to restrict the message apperance for transaction PTMW. In PTMW, when managers click on Goto -> Process Process Messages, they should see only the error messages. I tried to use badi PT_BLP_USER, but without success. Can you tell me how I can do this requirement ?
    Thanks

    The warning messages are fine and normal. (You may want to sellect a different build folder, looks lik eyou are building to where your apps are?)
    Not sure about how you are trying to burn them (I use Toast or DVD SP itself), but in general make a new disc, then add the VIDEO_TS and AUDIO_TS folders

  • Removing std warning message in SRM 7.1

    HI,
    We are on SRM 7.1 ECS.
    Whenever account assignment category is changed before ordering a cart,a std warning message is displayed "Enter a value in the mandatory field in account assignment" which is very annoying.Is there any way this message can be stopped to be displayed in the SC screen?
    Pls advise.
    Thanks in advance.

    Thanks Ricardo.
    We are on SP SAPK-70105 for SRM SERVER 701 .I dont undsratnd how this correction came in to our system.
    I'm assuming the corrections of note 1607395 are in the system and hence this message.How do I avoid this message?I tried adding it to table BBPV_PDMSG but that didnt help.
    Pls help.

  • Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

    Hi,
    I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
    Has any other user had such a problem, and if so, how did they rectify it.
    Any advice would be greatly appreciated.
    Thanks in advance.
    clarinet99

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • FV50-Park a G/L Account Document BDC Warning message in screen 1001

    I need some help with a BDC program.  I am working on a BDC program to process transaction FV50.   I went to SHDB and created a recording macro. When I test the recording with u201Csimpleu201D information the recording works correctly and the document is parked.  But, when I try to park a document with todays date for the Document Date and I use a date from a previous period I get a warning message which requires an extra screen to be displayed and u201Centeru201D has to pressed. My recording does not work when I get a warning message. I went back and re-recorded transaction FV50 and cause the u201Cwarningu201D message to be displayed so that I can add the extra screen to my BDC recording. I do not see the u201Cextrau201D screen in the new BDC recording.  Anyone know why? How can I make this BDC program handle this extra warning message?

    You will have to add some logic to your program to check the date. If it is from the previous period, process the warning screen; otherwise, do not.
    You may run into other problems as well. FV50 looks like an EnjoySAP transaction and not well suited to batch input.
    Rob

Maybe you are looking for