Warning message on startup and 3D disabled

A little while ago I started receiving a message on Photoshop startup saying that 3D requires a minimum of 512mb of vRAM.I havn't made any changes to my hardware.
I have a ATI 5700 graphics card installed, I don't really know what vRAM is but when I run a DxDiag it reports that there is 4095mb on the card, is this the vRAM, i don't know? If not how can I determine how vRAM I have?
Thanks,
Bernie

Pwlb wrote:
> The program seems to run ok, but I don't understand
what's causing this
> message or where I may have requested a language 'en'.
>
> Any ideas anyone? And how do I get rid of the warning
message?
This tech note may contain information related to your
problem
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=61246414
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Similar Messages

Warning message on startup

Hi Everyone,
I'm very new to Fireworks. Just starting to learn it with my
trusty "Macromedia Studion 8 For Dummies"!
On startup I'm getting the message "Problem loading the
content XML. You've requested a language ('en') which does not have
any available content".
The program seems to run ok, but I don't understand what's
causing this message or where I may have requested a language 'en'.
Any ideas anyone? And how do I get rid of the warning
message?
Many thanks for your time if anyone can help - sorry if it's
a dumb question.
Paul

Pwlb wrote:
> The program seems to run ok, but I don't understand
what's causing this
> message or where I may have requested a language 'en'.
>
> Any ideas anyone? And how do I get rid of the warning
message?
This tech note may contain information related to your
problem
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=61246414
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Internet Connection Message at startup and various moments of the day

I started out using a dial-up connection, then later upgraded to ethernet. Now, everytime I start up my iMac I get a Internet Connection message. Here's what it says, The selected communications device does not exist. Please verify your settings and try again. I click ok and my wirless still works. Then, later during my session I get the message again. Any thoughts on how to get rid of this message? Thanks in advance.
p.s. is this the right place for this question?
Thanks,
mdawg

Yes, this is the right place for such a question.
The issue with your problem is working out specifically which 'communications device' the Mac is complaining about. It's presumably the modem, but that's not necessarily the case.
The first place to look would be in System Preferences -> Network.
What network ports are enabled there? If the modem is still listed and is the preferred connection (it's at the top), then the Mac is going to try to use the modem and fall-back to the ethernet network if the modem fails.
If that is the case the solution is simple - just use the Show popup menu in Network Preferences to select Network Port Configurations. Here you can enable and disable different ports, as well as change their priority (by dragging them up/down).
Either drag the ethernet port to the top of the list or, if you never expect to go back to the modem, disable the modem option.

Error Message, user exits, and editing disabled problem.

HEllo I recently had an assignment where I have to create a user exit with an error message. I had no problems with the error message but after an error occurs, with this line:
<b> MESSAGE ID 'ZSD' TYPE 'W' NUMBER '002'.</b>
the fields have become disabled and there seems to be no way to enable the fields for changing. Is there a way to fix this. Thanks people and take care!

Oh, TYPE E, when issuing an error message, all fields are disabled unless you tie it to a field or group of fields. This is commonly done by using the CHAIN...ENDCHAIN statements in the PAI of the screen. Do you have access to this? I assume that you are issueing the message from within a MODULE, right? You are probably calling this module in the PAI flow logic of the screen. You will need to do something like this.
Here P_BUKRS is the screen field and CHECK_BUKRS is the module where you are checking the value and issuing the error message. Using the CHAIN, you can tie other fields to the check so that they are also enabled when the error message is issued.
CHAIN.
field p_bukrs module check_bukrs.
ENDCHAIN.
Regards,
Rich Heilman

Error message on startup and shutdown

When I start the system I receive a message that says
"[ 0.00000] tsc: Fast TSC calibration failed
/dev/sda1: clean, 122821/1831424 files, 873225/7323624 blocks
[ 6.345621] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 6.346256] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 6.346932] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users
firmware and download the correct firmware for this driver version. Please caref
ctions on this website."
The error message is typed the way I see it and being new to arch Linux I have no idea what to do. Any guidance would be greatly appreciated.
Thank you

Dr.Asian wrote:Yes i just tried the steps in the article and there was no change. .. I ran "sudo pacman -S b43-fwcutter" and "sudo pacman -S b43-fwcutter wget" restarted the PC and got the same message.
But, why did you not install https://aur.archlinux.org/packages/b43-firmware/ in accordance with the wiki article I linked for your convenience?

Really weird warning message at startup, then crash - Ipod Classic 80gb

Its been on its way out for about a year but now it looks like its finally broken.
When I start it up it gets a warning sign of a red circle with a cross in the middle, and a link to apple support. I can't find support for this sign or anything to tell me what it means. If I connect to pc it doesnt recognise so i cant restore to factory settings. Im stumped, please help!

Hello the offended,
Here is the support article related to this issue.
[iPod Displays a Red "X" Icon|http://support.apple.com/kb/ts1463]
Your iPod's hard drive is more than likely damaged and in need of replacement.
B-rock

Firefox install causes error messages during startup and freezes during running

I installed firefox 20 on Windows 7 and when I reboot I see several messages telling me that I am missing dll files. I have verified that all the dll files are in the install folder. I was able to run firefox without running firebug and just putting up with the annoyance in clicking ok ont he messages at the start. However when I installed firebug and tried to start I have not been able to use the browser since.

Is this already appearing during the boot process or only after starting Firefox?
You can use the MSConfig program or the Autoruns utility to see which software and services are getting started.
*http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 20.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

DBA COCKPIT warning message during startup

When I execute DBACOCKPIT the following message is displayed:
Problem with UDF Installation: Other error
Therefore some functions may not work properly.
Check the UDF configuration for more details.
You are able to "enter" the DBA Cockpit application. The only visable anomoly is:
"File Systems" is greyed-out under DB02-->CONFIGURATION. Therefore I am unable to select this icon and see the "df -k" statistics.
When I execute the TEST under DB02>CONFIGURATION>MONITORING SETTINGS the response is: Test of user defined functions has been finished without errors
The UDF configuration is version 19
The database is version: 09.01.0003
The SAP Application is SAP NW2004 version 640 with Support Pack 19
I have other systems with the same configuration and the problem does not exist - any ideas?

Hi Timothy,
I am not really sure, if the SAP Note 452275 - 'Problem with UDF installation' may help you, as it is quite old and have a new version
However, you have there also a reference to SAP Note 334777 - DB6: Missing user-defined functions, which explains you how to verify that the UDF are correctly installed.
Best regards, Edgardo

How to display warning message box with yes and no buttons

Hi,
I am writing the code to delete emp details from database.
I want to display warning message with yes and no buttons after clicking the delete button in the same page, if yes is clicked, i want to invoke delete() method in AM.
Is it possible, if yes pls suggest me how to do it.
Thanks
Message was edited by:
user536125

This is being discussed in
warning message(dialog page) to be displayed in the same page
Thanks
Tapash

Warning messages?

How do I turn off the very annoying battery warning message?
how do I disable battery warning message?
Both these are very annoying and ever remind me of windows which I hate

ckuan, you are clearly from the generation who can't spell or take responsibility for their own lives. I don't need someone to tell me when I need to use the bathroom, that was a metaphor in case you didn't realise. Similarly I don't need somebody else telling me when my battery is about to expire I can see that from the battery symbol itself it goes red or didn't you realise that either. if my call was that important I would make sure I was plugged into to a charger or my battery was full before hand.
Why not have an audible warning also and a voice???
Your comment was ridiculous. For apple not to give the user the option of turning off the message purely encourages hackers and jailbreakers. If Apple don't give the users what they want then they are opening themselves up to viruses malware and likes of Windows insecurity. I sincerely hope this does not happen.

Removing warning messages - PTMW

Hi,
I must to restrict the message apperance for transaction PTMW. In PTMW, when managers click on Goto -> Process Process Messages, they should see only the error messages. I tried to use badi PT_BLP_USER, but without success. Can you tell me how I can do this requirement ?
Thanks

The warning messages are fine and normal. (You may want to sellect a different build folder, looks lik eyou are building to where your apps are?)
Not sure about how you are trying to burn them (I use Toast or DVD SP itself), but in general make a new disc, then add the VIDEO_TS and AUDIO_TS folders

Warning message in a report throwing out completely

Hi All,
I have areport in which a warning message is getting generated inside standard fm .
Its coming inside a FM which inturn is turn call some other FM and so on ,so its not throwing any exception to catch it.
When the warning message is coming the report is completely throwing us out,its not continuing if you press enter after warning.
The FM which I am calling in the start of selection event of my program is RMXM951_RECIPE_TRANSFORM_START.
This FM inturn is calling FM MRTRS965_BOM_GENERATION in this we after some points its calling the PERFORM create_bom.
The warning message is coming inside this perform.
The report is actaully written to convert multiple general receipes to master recepies at a time.
We have standard SAP transaction to acheive this but it does one at a time and not multiple.However the stadard program being module pool the transaction is continuing after the warning message once we press the enter key.
So kinldy let me know how to proceed on this.
Thanks you all very much in advance.
Regards,
Kishore.

Hi Kishore
debugg your program and find out the location where this warning message is coming
and change the code for your warning message.
Like what i did in my one of the program for the same reason.
it was an error message on some validation and it was also throwing me out of the program.
I write:
message 'Invalid Entry' type 'S' display like 'E'.
leave to list processing.
this code displayed my success message like an error message and keep me on the same screen so that I canenter the correct values.
So I think you need to do some thing like that.
Thanks
Lalit Gupta

How to show warning message in am

How to show warning message in am but not Stop , it still can go ahead.
Thank you very much.

jamras ,
If i got you correct you wanna show user a list fo warnings after that have occured in some method in AM, and show them to user collectively, and the processing of the page should not stop in the above. What you need to do for it, is instead of throwing warning message in AM, collect all warnings in a arraylist or vector. when you navigate back to CO, iterate through this arraylist/vector and for each use pagecontext.putDialogmessage(oaexception).In this way you will be able to show all warning messages on page and your processing will not stop!
--Mukul

Warning Message Converted into Error Message

Hi,
I have converted warning message into error and I am checking the results of the same...it is giving me the desired result, but the in the dialog box instead of 'E' (error), it is showing 'I' (information) and the instead of Red signal, it is showing Yellow signal, why it is so? And how to correct it?
-Saleel Kulkarni

Hi,
Message No. 06152
Material Master > Purchasing > Enviorment Data > Define Attributes of System Messages , here I added one entry which I found by executing transaction code (Message Maintenance) SE91.
I was searching in forum... Jurgen has replied to same query....he suggesting SAP Note (521174), what you suggest?
-Saleel Kulkarni

Pop up warning message while creating PO

Hi,
How to give a Genral or a POP up Warning Message while creating and checking a PO in ME21n and ME22n.
Even i tried in changing the local setting in the menu bar, but it doesnt work.
Help and suggestions will be much appreciated.
Thanks & Regards.
Kumar.

Hi Jay,
I tired with the BADI ME_PROCESS_PO_CUST in the method IF_EX_ME_PROCESS_PO_CUST~CHECK, but still i am able to display only error message not Warning message.
Any suggestion regarding this.....
Thanks & Regards.
Kumar.

Warning message on startup and 3D disabled

Similar Messages

Maybe you are looking for