Warning message reg

Hi SAP Gurus,
A warning message should pop-up at the time of PO creation wrt PR if PO Qty is Greater than PR Qty.
I selected the message as Order Qty is greater the PR qty.
The system incorrectly allows multiple PO's for a single PR messgae is disputing with the above requirement.Already I selected the message 00 06 076 & 00 06 400.I need the message other than these two.
Thanks is advance

Hi Hanuma
You can allot points to the  suitable  contributor
Regards
Vikrant

Similar Messages

  • Reg: display the warning message in alv out put

    Hi All,
              i am uloading the flat file data ,display in the alv grid in the edit mode. when i am trying to change the output data in grid, for which are having the blank (no value for the field) , i want to display warning message the selected cell is blank.
    could u help me on this please.
    Thanks,
    Kumar

    For  editing the ALV cell .. you would be writing some code .. which is mandt  rite ?
    So  before that  code u check the filed value ..initial or not ..

  • Reg: Warning message in UWL or task TS00700049 &  TS00700059

    Hi ,
           We tried to configure the Universal worklist. On registering it , we are getting hte following warnings.
    WebDynproApplication value not found for task TS00700049 in system SAP_Webflow
    Portal Component value not found for task TS00700059 in system SAP_Webflow
    Can anyone let us know if we have to give any parameters in SWFVISU tcode.
    Thanks & Regards
    Priya

    Hi Priya,
    WebDynproApplication value not found for task TS00700049 in system SAP_Webflow
    This means in the visuvalisation parameters maintained for this task in back end, the WebDynproApplication name specified is not available in portal.
    Do one thing, goto swfvisu, then search for task TS00700049, select the task and click on visuvalisation parametres option on the left hand side. Check what is the webdynpro application name specified there.
    generally this value will be local/applicationname
    *Portal Component value not found for task TS00700059 in system SAP_Webflow *
    This means the portal component specified in the backend is not available in portal.
    Do one thing, goto swfvisu, then search for task TS00700059 , select the task and click on visuvalisation parametres option on the left hand side. Check what is the portal component value.
    More over, I hope these two are only warning messages. they wont effect your UWL functionality. If you are using these two tasks then you wont get desired results.
    Regards,
    SrinivaS

  • Reg: Uploading data with Warning Message

    Hi,
    I have searched the forum and found a lot of threads related with this. But nothing fits my scenario or I didn't get the solution correctly from them.
    My scenario is I recorded a BDC. When I run it in foreground, sometimes I get warning messages based upon the data to be uploaded. But if I run it in foreground, I press enter and then data will be saved.
    When I run the same BDC in background, the data won't be uploaded as I miss that pressing of Enter there. The thing is that, this warning could happen anywhere (any screen, any field). How can I handle this?
    Regards,
    Jubish

    Hi,
    You should sit with your functional consultant and do the recording part. He should be able to tell you where these warning messages can come. Or please check with him if you can avoid these warning messages. It becomes difficult to handle warning messages in BDC if we don't know where they might come.
    So, once you know where these warning messages come, you can put additional code for enter in your BDC at that place. It should solve your purpose.
    Thanks,
    Archana

  • Report on Warning Message in sales order

    I have configured in OVA8 such that it only gives a "Warning Message" and does not block the sales order.
    Because these sales order are not blocked they don't need to be released. I need a report on list of sales order where warning messages have appeared for credit limit exceed.
    As its only warning message and not erro, it needn't be released so VKM1, VKM2 & VKM4 doesn't solve the issue.

    Hi,
    It is not possible to get the report as you required in Std. System considers the sales order if the warning msg appears as same as a normal SO without any warnign msg. In status level (table VBUK) there won't be any change.
    If you need it deliberately, then you shall take help from ABAp to develop a Z-report that too you need to use  some sales order level user exit to capture the warning message(Message no. V1152) generated sales order no.s and then you can use the same info in  Z-report.
    Hope this helps..
    Reg,
    JJ
    Edited by: Jagsap on Apr 14, 2010 1:22 PM

  • Error Message and warning message in PO creation

    Hi,
       I have one requirement like when user create PO with 'critical material',while saving PO,user  should get message "critical material".
    For this ,in the enhancement MM06E005,EXIT_SAPMM06E_012(functional module),
    I have written piece of code
    *critical Material by Jaheer,ABAP & MM specialist
    LOOP AT TEKPO.
      IF TEKPO-MATKL EQ '9068'.
        MESSAGE ID 'ZMM' TYPE 'W' NUMBER '013' with TEKPO-MATNR.
         ENDIF.
    endloop.
    Here whenever I put message type 'E',I am getting message "critical material".But I donot want  error message  ,I want only warning message,so when I changed message type as "W",I am not getting any message while checking My PO.
    What is the reason?
    please,Can somebody throw some light on this?
    With Reg,
    Jaheer

    Hi,
    The linkage between warning and crtical materila is improper. Initially you have setted as E CRITICAL MATERIAL. Please change the status of message from error to warning in custamization instead of doing in program. Hope it works.Thanking you

  • Error message & warning message while creating PO

    Hi,
    I have one requirement like when user create PO with 'critical material',while saving PO,user should get message "critical material".
    For this ,in the enhancement MM06E005,EXIT_SAPMM06E_012(functional module),
    I have written piece of code
    *critical Material by Jaheer,ABAP & MM specialist
    LOOP AT TEKPO.
    IF TEKPO-MATKL EQ '9068'.
    MESSAGE ID 'ZMM' TYPE 'W' NUMBER '013' with TEKPO-MATNR.
    ENDIF.
    endloop.
    Here whenever I put message type 'E',I am getting message "critical material".But I donot want error message ,I want only warning message,so when I changed message type as "W",I am not getting any message while checking My PO.
    What is the reason?
    please,Can somebody throw some light on this?
    With Reg,
    Jaheer

    Hi
    Use the badi ME_PROCESS_PO_CUST, method CHECK, with a coding as this
      include mm_messages_mac.
      data: header       type mepoheader,
            items        type purchase_order_items,
            po_line      type mepoitem,
            line_item    type purchase_order_item.
      header = im_header->get_data( ).
      items  = im_header->get_items( ).
    LOOP AT items INTO line_item.
    IF condition IS TRUE.  "critical material (line_item-matnr)
           mmpur_message 'W' 'ZMM' '013' line_item-matnr ' ' ' '  ' '.
    ENDIF.
    ENDLOOP.
    I hope this helps you
    Regards
    Eduardo

  • I am getting a warning message when i am trying to create a host-named sitecollection.

    Hi guys,
          I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
    http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
    When i tried to create a customer root site. I am getting a warning message
    " WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
    Application.  The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
    this port."
    I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
    Can anyone help me to solve. And i wanna know why this error message comes!!!
    Thanks in advance
    Rajendran.

    First, you shouldn't create a host named site collection on a Web app that has host header named.  Doing that implements host names at two different levels and will not work reliably.  Second I'm not sure what you mean when you say you didn't
    use the FQDN but used just the domain name.  A Full url will always be either an FQDN or a shorter Netbios name.  If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url  There is no way
    to use just the domain name.  For example, Contoso.com is the domain name.  Server.contoso.com or WEbsite.contoso.com are FQDNs.  YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
    still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain.  What is the URL for your root site and your host named site?
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Warning message in ALV report

    Hi Experts,
    In ALV report i am getting warning like
    " Field string LS_HEADER is not referenced statically"
    Actually i declared this field as "DATA: ls_header TYPE slis_listheader.".
    How to correct this warning message.
    Thanks in advance.
    Thanks,
    Madhu.

    Dear Madhu,
    You are not using LS_HEADER statically that you have defined in the program. You will get a warning message since you have defined a field that you have not referenced statically.
    Are you using this field dynamically? You can delete/comment the code if you are not using it statically and dynamically.
    Moved the thread ABAP forum. Post your queries in relevant forums to get efficient answers.
    Regards,
    Naveen

  • Warning message in BW Report  through Portal

    Friends,
    I really need your help to remove the waring message.
    For the purpose of changing the description on the Selection screen from “Cost Cetnters (Authorised Values)” to “Funds Centers” I had changed the ZCCTRATI variable description to Funds Centers
    Issue:
    When we open the old report we see the following information message.
    " Value if variable ZCCTRAT1 is automatically converted
    I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
    Can u help me how to remove this ?

    Hi Manohar,
    Edit to add: Here I assume you have a Web Application Designer (WAD) report.
    You can suppress system and warning messages in WAD. Try this and see if it helps.
    - Go to your WAD report
    - In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
    - Click Web Item
    - Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
    Hope this helps,
    Regards,
    Petter
    Message was edited by: M Petter

  • Error message into warning message KO450

    Hi,
    There are  unsettle RA  value in project PAD-9114. Because of  this unsettle RA  value in  the project  we are not able to  close the project and receiving error message like below:
    1.There is still WIP for wbs
    2.Balance of  wbs is not zero.
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    How  to change  above  error message   into warning message so that   it will allow us to  close  the project.
    With regards,
    V.krishnamoorthy

    Hi,
    Thanks  for your answer. But still i am receiving the same error
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    With regards,
    V.krishnamoorthy

  • Standard warning messages in Vendor Request Form

    Hi All,
    Please let us know, how are the standard warning messages in Vendor Request Form while creation/search are displayed.
    For example, I am getting an soft warning message text, at vendor creation which says "Some of the records were not found; for more information, check the log".
    Here we don't have any log traces to be checked for, and we have verified the back end record resultset count which is same, irrelevant of the warning message being shown.
    These messages are displayed only at two places:
    1) The search navigation page, where all the searched record results are displayed and we continue further for creation of vendor workflow.
    2) When the workflow of vendor creation is completed, along with the "Workflow has been completed" success message, this warning message is also shown.
    I want to know, from where these messages are being populated and how to suppress these messages.
    Kindly suggest.
    Thanks in advance!
    Message was edited by: Oxana Noa Zubarev

    Hi All,
    Attaching the screen shot for refernce:
    After we click on "continue with create/edit" button, after few details have been entered, the work flow completes.
    There are we are getting these error message as highlighted above.
    Let me know if any info from my end would help in getting the root cause.
    Thanks in advance.

  • I downloaded Firefox 4.0 onto my Mac but when I try to open it I get a warning message saying "The following disk images couldn't be opened" What do I do now?

    While running Firefox, I got a prompt saying their was an update. I did that, but then got another message saying that it was recommended I update firefox to 4.0. I downloaded it, but never received a prompt to drag the image into my applications folder. I also never saw an image of firefox 4.0 on my desktop. Firefox 4.0 was in my downloads folder but got the above warning message when I clicked on it. I tried downloading it again, but the same thing happened. Now what? It appears that Firefox is still running, although I haven't yet tried to go to another website.

    Try:
    *http://thexlab.com/faqs/resetlaunchservices.html
    * http://guides.macrumors.com/Repairing_Permissions

  • Removing warning messages - PTMW

    Hi,
    I must to restrict the message apperance for transaction PTMW. In PTMW, when managers click on Goto -> Process Process Messages, they should see only the error messages. I tried to use badi PT_BLP_USER, but without success. Can you tell me how I can do this requirement ?
    Thanks

    The warning messages are fine and normal. (You may want to sellect a different build folder, looks lik eyou are building to where your apps are?)
    Not sure about how you are trying to burn them (I use Toast or DVD SP itself), but in general make a new disc, then add the VIDEO_TS and AUDIO_TS folders

  • Removing std warning message in SRM 7.1

    HI,
    We are on SRM 7.1 ECS.
    Whenever account assignment category is changed before ordering a cart,a std warning message is displayed "Enter a value in the mandatory field in account assignment" which is very annoying.Is there any way this message can be stopped to be displayed in the SC screen?
    Pls advise.
    Thanks in advance.

    Thanks Ricardo.
    We are on SP SAPK-70105 for SRM SERVER 701 .I dont undsratnd how this correction came in to our system.
    I'm assuming the corrections of note 1607395 are in the system and hence this message.How do I avoid this message?I tried adding it to table BBPV_PDMSG but that didnt help.
    Pls help.

Maybe you are looking for