Warning message required.

Hi everyone
When I create STO with quantity 100  and try delivering it with quantity -120, SAP allows it. But I want to put a warning message here  if the delivery quantity entered is more than 10% of STO quantity. i.e I  want to set upper delivery limit as 10%.
I have maintained the same in delivery tab of Item data-(Over Delv Tol-10% and under dely Tol-1%). But still its accepting 150/180 qty or  whatever we put.
Pls let me know the configuration required for a warning message.
Regards,

Hi,
try TC OVLP / Define Delivery Item Categories. For relevant item types, set "Check Overdelivery" indicator to A / Note about the situation or B / Situation rejected with an error message.
Field desc:
Control for checking for overdelivery
Specifies how the system reacts when, during delivery processing, you exceed the original order quantity.
Use
For each delivery item category, you can specify whether the system checks for overdelivery and, if so, whether you receive a warning or error during delivery processing. If you have specified an overdelivery limit in the sales order or in the customer-material info record, you can use this indicator to control how the system reacts.
BR, Zuzana.

Similar Messages

  • Warning message required when we chnage invoicing party in MIRO

    HI All,
    Our client require the below settings.
    If we change the invoicing party in MIRO which is different than the PO vendor then system should throw warning message or pop up.
    I had tried to convence them that it can impact scenarios but they says they require warning message at least so that if anybody is changing the Invoicing party then he will get the message.
    I had tried by maintaining M8286 message in OBA5 but i didnt got the warining.
    Please suggest how we can achieve this.
    Regards,
    Umesh

    Dear,
    Take ABAPer help to make a warning/error message - if invoicing party chaged.
    Secondly please go through OSS : 322430 & 1156325.
    Also BADI for changing payment terms in MIRO "MRM_PAYMENT_TERMS ".
    Regards,
    Syed Hussain.

  • Training Budget exceeded in Training & Event Mgt (warning message required)

    Hi Experts
    I  have configured budget management for Training and Event Management.i.e budget type, budget units, assigning budget units to financing units and entered the budgeted amount for budget unit.
    i want to know how can i get warning message at the time of booking an employee that your budget is exceeding the limit.
    My report (Comparison report) in showing in red highlighted colour that budget exceeded but i am not getting any message at the time of booking an employee for the course that budget is exceeding the limit.
    Can any one tell me from where i can switch on or control this warning or error message.
    Thanking you all in advance for your time and consideration
    Regards,
    Saad

    Dear Chetan
    I have configured all budget functionality as mentioned in that document. My question was to have a check that give error or a warning message if training budget exceeds. I need something like budget control permisibility function
    Regards,
    Saad

  • Warning message required in po to identify whether price is taking from info record or condition record

    Hi experts,
                        while  creating purchase order,If condition record and info record both are exists means how system will identify that which price need to pick for particular vendor.
                       Is it possible to set  warning or error message for above mentioned scenario.
    Thanks ,
    Deepika.

    If an info record has no  price conditions itself then the price is determined from the last PO.
    It is not always table A017, there are more tables for conditions to the info record, e.g. A018 and A025, this is dependent on the level of your info record which can be created at plant level or at purchasing organization level (no plant entered), with or without material number.
    For more detailed information see the docu in help.sap.com: Price Determination - Purchasing (MM-PUR) - SAP Library
    and the OSS note 456691 - FAQ: Price determination in purchasing
    and 569885 - About Info Record Update indicator (EKPO-SPINF)

  • Removing warning messages - PTMW

    Hi,
    I must to restrict the message apperance for transaction PTMW. In PTMW, when managers click on Goto -> Process Process Messages, they should see only the error messages. I tried to use badi PT_BLP_USER, but without success. Can you tell me how I can do this requirement ?
    Thanks

    The warning messages are fine and normal. (You may want to sellect a different build folder, looks lik eyou are building to where your apps are?)
    Not sure about how you are trying to burn them (I use Toast or DVD SP itself), but in general make a new disc, then add the VIDEO_TS and AUDIO_TS folders

  • FV50-Park a G/L Account Document BDC Warning message in screen 1001

    I need some help with a BDC program.  I am working on a BDC program to process transaction FV50.   I went to SHDB and created a recording macro. When I test the recording with u201Csimpleu201D information the recording works correctly and the document is parked.  But, when I try to park a document with todays date for the Document Date and I use a date from a previous period I get a warning message which requires an extra screen to be displayed and u201Centeru201D has to pressed. My recording does not work when I get a warning message. I went back and re-recorded transaction FV50 and cause the u201Cwarningu201D message to be displayed so that I can add the extra screen to my BDC recording. I do not see the u201Cextrau201D screen in the new BDC recording.  Anyone know why? How can I make this BDC program handle this extra warning message?

    You will have to add some logic to your program to check the date. If it is from the previous period, process the warning screen; otherwise, do not.
    You may run into other problems as well. FV50 looks like an EnjoySAP transaction and not well suited to batch input.
    Rob

  • Warning message in Oracle Workflow notification

    Hi,
    I have a requirement, where a warning message is to be shown to the user when he presses the Approve button of a notification.
    I know that through post notification function, validations for a particular notification can be performed and an error message can be shown to the user using RESULT := 'ERROR: error_msg'
    But can a warning message be shown ? If yes how?
    Thanks in advance.
    Souri Guha

    I would try by using a parameter to tell whether the warning message for the notification has been displayed. First time the notification is being approved the function raises the warning message and sets that attribute to indicate the warning has been displayed. Next attempt to respond the notification your function will check that attribute has been set and will do nothing, just let the notification go responded.
    You might as well present the warning message in the notification body and introduce another attribute to get the acknowledgement from the user. Only when that attribute is set to YES (acknowledge) will the post-notification function actually let the notification be approved, otherwise an error is presented for the user to acknowledge.
    Hope this helps
    Alejandro

  • Warning message in VT01 or 02n Shipment completion

    II am trying to create a warning message when Pressing the Shipment completion button in VT01 or 02n Transaction.
    Standard Activity profile does not have any area to enter a custom Formula or Routine that will help the developer to enter the logic. Also I donu2019t want to use output type to trigger work flow that will call the required program - it will be too data heavy.
    Case: We use a Packaging Unit that basically is used to determine the Total, tare and loaded weight (HU in Shipments). The delivery assigned to the Shipment has its item QTY which should be within the Loaded weight of the handling unit. Hence need some sort of pop up or warning message that will inform on Shipment completion u2013 any help or ideas

    Best option here is to use user exit in shipment to create pop up.
    Hope it helps.

  • Warning Message in Absence Page

    Hi All,
    I have a requirement detailing the Following Scenario in Oracle HRMS R12.1.1
    1. User selects Create Absence Entry
    2. Selects Paternity Leave
    3. Create the Leaves and Click the Submit Button
    4. A warning Message should be issued to the User (Asking him to submit the Child Birth Certificate)
    5. This should be a warning message and if the user clicks the submit button once again, he should be allowed to submit the Leave.
    I have extended the concerned class in the Page and added the Warning Message.
    However when submitting the leave in the Application, the Warning Message is displayed, but it does NOT allow the user to proceed.
    The code is as follows:
    if(absenceType.trim().equalsIgnoreCase("Paternity Leave") && gender.equalsIgnoreCase("M"))
                             //Change by Ravi @ 06-Aug-2010 to give a Warning Message to the User that a Medical Certificate Needs to be provided
                             throw new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);Grateful if you people could help.
    Thks
    Ravi

    Hi Ravi
    throw statement throws the error and ends the execution!!!!You can try like below code
    if(absenceType.trim().equalsIgnoreCase("Paternity Leave") && gender.equalsIgnoreCase("M"))
    //Change by Ravi @ 06-Aug-2010 to give a Warning Message to the User that a Medical Certificate Needs to be provided
    //throw new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);
    OAException exception = new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);
    pageContext.putDialogMessage(exception);Hope it helps!!!
    Thanks
    AJ

  • Warning message in IT0021

    Hi experts,
    When i create, change or display the record in IT0021with any subtype, it shows warning message "Assignment to feature P0021 did not take place ", what does it mean? what will happen if i ignore this message? where it will going to effect?
    How to handle this warning message?
    Kindly guide me in this..

    Hi,
    pls check the feature P0021 is configured against country grouping 40 and required subtypes.
    The subtypes 1 (Spouse), 2 (Child), and 10 (Divorced spouse) are supported
    now save and activate the same CTRL+F3.
    regards,
    puja
    Edited by: pujapushap on Mar 5, 2012 7:09 AM

  • Warning message in field exit

    Hi All,
    I'd the requirement of giving a warning message for transaction VA01 if user enters some specific order type.
    So I'd created a field exit for AUART for this screen. But i am able to give error message only and found out that warning & info messages can't be given in a field exit.
    Please help me out. Is there any way I can give a warning message in field exit or suggest some other sol. for it.
    Thanks,
    Manu

    Hi,
    Thanks f or your answers, but the issue is that i need to give this message as User enters the details on VA01 screen & presses enters.SO i can't use user exit like move_field_to_Vbak & others.
    Also, using a FM to give pop up message will ultimately make use of statement CALL SCREEN which is not allowed in field exit, i also tried FMs which displays messages normally means not in pop up screen, but again through it also i can only give error messages.
    Please suggets if there is any other option.
    Thanks,
    Manu Parihar

  • Warning-Message in START-OF-SELECTION?

    Hi there,
    I have a question: Isn't it possible to write a warning-message in the start-of-selection-block? I have the following code:
    START-OF-SELECTION.
      IF s_matnr IS INITIAL.
        MESSAGE w036(z_mm).
      ENDIF.
      IF p_migo = true.
        MESSAGE w059(z_mm).
      ENDIF.
      SELECT * FROM mara
    But when I run this program the warning-messages appear as normal errors and not as warnings. Why is this so? I can't understand this behaviour?
    I wanna to warn the user if he is selecting to much data because of missing information in the selection-screen...
    If I use the AT SELECTION-SCREEN-block, the messages works fine, but the the messages also appear if the user clicks on the extension button of a select-option, and that I wanna to have.
    Thank you
    Regards
    Markus

    Hi,
      You can get the warning messages as you required when you use the validation in
            AT SELECTION-SCREEN ON 'filed_name' .
    If you do this validation in AT SELECTION-SCREEN OUTPUT.
    then the warning message will appear as soon as the selection screen appear.
    so use it in the AT SELECTION-SCREEN ON 'field_name'.
    ****Reward if useful.
    With Regards,
    Sunny.

  • Warning message in pop up

    Hi,
    I have a requirement where i have to get a warning message in pop up,
    Please suggest me, if anyone knows any function modules, Pl let me know
    Thanks & Regards,
    Kirthi

    Use your message as "I" it will be poped-up..
    Ex: MESSAGE I001....
    OR
    Use FM 'POPUP_FOR_INFORMATION' OR  'POPUP_TO_CONFIRM'
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • Report on Warning Message in sales order

    I have configured in OVA8 such that it only gives a "Warning Message" and does not block the sales order.
    Because these sales order are not blocked they don't need to be released. I need a report on list of sales order where warning messages have appeared for credit limit exceed.
    As its only warning message and not erro, it needn't be released so VKM1, VKM2 & VKM4 doesn't solve the issue.

    Hi,
    It is not possible to get the report as you required in Std. System considers the sales order if the warning msg appears as same as a normal SO without any warnign msg. In status level (table VBUK) there won't be any change.
    If you need it deliberately, then you shall take help from ABAp to develop a Z-report that too you need to use  some sales order level user exit to capture the warning message(Message no. V1152) generated sales order no.s and then you can use the same info in  Z-report.
    Hope this helps..
    Reg,
    JJ
    Edited by: Jagsap on Apr 14, 2010 1:22 PM

  • Warning message in asset cap.

    Hi,
    we have a following requirement:
    "At the time of asset capitalization amunting less than 5000 then systen should give a pop up warning message that check dep. key in asset master"
    To meet the above, we have written a validation rule that if posting key is 70 & amount is less than 5000 then system should give a pop message. Currently that validation rule is working for F-90 & KO88. I want to know whether the said solution is viable or not OR can we write any other better logic than above?
    Regards
    Anuj

    Hi
    If you are sure that F-90 & KO88 are the only two ways in which assets can be capitalized, than this is fine. However, you may also look at the option of capitalization through WBS and through Transfer from other assets.
    Regards
    Sanil Bhandari

Maybe you are looking for