Warning message should be raised when user changes Business Area in MIRO.

Hello all,
My requirement is,
When in MIRO transaction, in details tab the BA (Business Area) comes from PO line items. When user changes this Business Area to some other value then the system should raise a warning message and continue with the transaction. It happens in MRHR transaction in 4.6. Now we are on ECC6.0 and user wants this functionality.
So is there any configuration to be done or so I need to write User Exit?
Please explain in details like where to make these config settings and all.
Thanks in advance.

Hi Harshal,
Make use of EXIT_SAPLMRMP_010 in Enchancement LMR1M001 User exits in Logistics Invoice Verification.
Raise your warning message by validating GSBER present in structure in exit's FM : EXIT_SAPLMRMP_010
hope this helps.
Regds,
abhee

Similar Messages

In base component when user change the serial number we need to set date time in Extra attribute filed

HI Team,
In ibase component when user change the serial number we need to set date time in Extra attribute filed..if we click edit ,User change serial number after save we need to set date time in Extra Attribute 4 field .
Component - PRDGENSET
In this component there is no attributes,so where we need to implement and how to implement please help.
Thanks
kalpana

Hi Abi,
Thanks for your reply..see i debugged..i have put break point in method SET_S_STRUCT method if press enter in serial number ,debuggeris triggered..in SET_S_STRUCT method value getting serial number..so how to write the logic here...
In GET_S_STRUCT method iam getting all attributes but serial number is not filled..So could you please help here what to do..
in set_S_STRCUT method value iam gettin serial number...in collection wrapper iam geting zrealtions if i open attributes_ref -if i pass Attribute value in run time its getting displayed.so how to write the logic based on serial number please help some coding.
Thanks
kalpana

Found out when user change something

Hi - Regarding our UI pattern button "Save" initially is disabled - and is activated only when user changes something in form view (change something in InputField or TextEdit UI)
Is it possible in WD to find out this event?
In InputField there is event OnEnter - but this not enough - user may pass the fields with TAB sequence and event is not triggered.

Well, I guess it's impossible. You need some action to force propagating data from client to server. And in your case there is nothing -- focus traverse events are not supported.
The only way is to enable "Save" action and skip unecessary updates in action handler.
VS

HT204053 What should I do when I changed my apple password and apps will not except it?

What should I do when I changed my apple password and apps will not except it?

Find out what apple id was used to purchase those apps and use that password.

Changing business area on a cost center

We mainly use HR, but we use some FI/CO for accounting. (I am no expert in FI/CO whatsoever - so please excuse any incorrect terms).
Our users have entered incorrect business area to a cost center.
This business area is now registered on employees, and payroll/posting has been run up unitil October 2010.
If I try to change business area from 01.11.2009 (realize it is probably not good to change earlier due to postings); I get the following error message: "Field change Business Area is not possible (transaction data already exists)"
In addition, the message says: If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...". However, trying to change the analysis period I am told I have to choose year end.
My questions are:
1. Is there a way I can change business area from 01.11.2009 ?
2. Is there a way to change area earlier - and if so, what are the impacts+
I appreciate any help
Kirsten
Edited by: Kibo on Oct 11, 2009 2:44 PM

Hi Kirsten,
Normally, it's not possible to change business area during a fiscal year once there is already postings in this Fiscal Year.
The reason is to make sure that there is no change within the fiscal year since you then would have different postings - cost center belonging to different business areas within the same fiscal year. Meaning that it is possible to change the business area for the next fiscal year like described in the long text of the error message KS134. The reason is that it is to avoid inconsistency update of the table (COSS, COEP, or COSP).
Although, If the following requirements are met, than it is is possible to change the business area during a fiscal year with the
help of the note 62716:
1. The change interval is set to period limits
2. There is no dependent actual transaction data in the change interval
    or afterwards.
3. There must already be an analysis period for the respective cost
    center which starts on the first day of the chosen period. If this
    is not the case, you can create one with 'Change cost center'
If the requirements are met, you can run the report RKACOR06 in SE38
safely. I recommend you to execute the report first with Test Run on
your test system.
Regards,
Greta

Change business are in cost center

Hi
How to change business are in the already created cost center ???? Pls advice
Thanx

Hi
SAP note 62716 covers this process to change BA if data already exists:
I have copied below in case you dont have access to notes:
Symptom
When you attempt to change the company code or the business area in the master record of the cost center, the system displays message KS020 or KS134 because dependent data already exists, or the system displays message KS021 because the change interval is not set to the year limits.
Enhancement: As of Release 4.6C the report RKACOR06 is enhanced so that you can also change the master data from business processes (CO-ABC, Activity Based Costing) correspondingly.
Reason and Prerequisites
For actual postings, the company code is updated in the document. It is therefore not possible to change the company code of the participating account assignment (for example cost center) later on.
The checks for dependent data, however, are carried out on year level. For this reason, it is not possible to change the company code or the business area during the fiscal year.
Solution
Using report RKACOR06, you can also make changes to the company code and the business area in the master record of the cost center during the fiscal year if the following requirements are met:
1. The change interval is set to period limits
2. There is no dependent actual transaction data in the change interval or afterwards.
3. There must already be an analysis period for the respective cost center which starts on the first day of the chosen period. If this is not the case, you can create one with 'Change cost center' - KS02 (for example, by changing the cost center manager).
If the system contains dependent planning data in a plan integrated version, any respective profit centers and extended general ledgers that exist must be restructured. For profit center accounting, you can use Transaction 1KE0 for this purpose.
Caution! If you change the company code of a cost center, a reversal of a posting in a different period can no longer be carried out if the cost center is assigned to another company code in the reversal period.
Report RKACOR06 is contained in the standard system as of Release 3.1I.
For prior releases, you can download the report from the FTP server sapserv3 from the directory /general/R3server/abap/note.0062716.
Report RKACOR06 does not generate any change pointers. Thus, if you want to send the change of cost centers via ALE, use Transaction BD16.
If you cannot change the BA for some other reason, please provide details.
Regards, Elaine

Capture DB Table and column comments when creating new Business Area/Folder

Does anyone know if it is possible to pull the DB table and column comments into Discoverer when creating new Business Area/Folders? Our developers take the time to put the information in the Db data dictionary and we would like to leverage it (reduce need for manually adding descriptions) ... has anyone done this?
If there isn't a way to automatically do it, would there be any harm in using a sql script to populate the description fields from the DB data dictionary directly into the EUL tables appropriate?
I have been searching through documentation and forums for information - with no luck at this point.
Thanks!

Hi Seymour
You can add column comments to views as well, as this example will show:
CREATE OR REPLACE FORCE VIEW MY_SEQUENCE
(SEQ_ID, SEQ_NAME, SEQ_NEXTVAL)
AS
SELECT "SEQ_ID","SEQ_NAME","SEQ_NEXTVAL" FROM EUL5_SEQUENCES;
COMMENT ON COLUMN MY_SEQUENCE.SEQ_NAME IS 'The sequence';
So you could add the comments at the view level and then refresh Discoverer.
Best wishes
Michael

Warning message, if Quantity=0, when creating a sales order with VA01orVA02

Hi Experts,
Currently, if the user do not enters any value in QUANTITY field, while creating a sales order(or even VA02 too) ..........we are getting a Warning message(VU001).
So, I need to change it to hard error message type, am changing the message type, but, its not reflecting, and still its throwing a warning message(VU001)!!
Let me know that, What is the correct user exit to incorporate my changes?
From where this message generating? am keeping a watch point with this message (VU001), but, its not stopping!!
System is ECC 6.0
repliaes appreciated
thanq
Edited by: SAP ABAPer on Dec 22, 2008 4:38 PM

thanq
(the reason, why my original code was worked is that, I put my code in SAVE user exit!!)
yes, its working, but, the scaenrio is different, so, its like,
if the user entered my_matnr with quantity = 0,
then presses ENTER,
now, we are getting a WARNING MESSAGE of message class & # is VU001, saying the Item 000010 is quantity 0...........so, here I need to change it to HARD ERROR message.
So, as soon as press the ENTER button(after enetring 0 qty matnr)........I need to get HARD error message, so, where should I incorporate the changes? is it MOVE FIELD TO VBAP user exit?
thanq

Warning message about CMP problem when launching query - how to suppress?

Dear Experts
How can I suppress warning message that did not stop the query from running?
I encounter this message when 1st launching it. The next run , it does not show. But if user run it i think may still show. How to suppress it?
The message is :
=================
Characteristic [Z_I_NN_FN]Application Sub Grou of the MultiProvider is not provided by the PartProvider ZC_00N; this means it is not identified. However, [Z_I_NN_FN]Application Sub Grou is compounded to 0COMP_CODE and 0COMP_CODE is identified with characteristic Z_I_MM_FM for InfoProvider ZC_006.
In this case, there is a compounding or CMP problem with [Z_I_NN_FN]Application Sub Grou in the MultiProvider for PartProvider ZC_006.
Processing characteristics with CMP problems in the data manager is very complicated and can have a negative impact on performance. The data manager cannot use SIDs for these characteristics (at least not in the corresponding InfoProvider) because the initial SID = 0 for [Z_I_NN_FN]Application Sub Grou is not the same as the initial compound key for 0COMP_CODE [Z_I_NN_FN]Application Sub Grou (that is, when real values are posted in ZC_006 for 0COMP_CODE).
For this reason, hierarchies for [Z_I_NN_FN]Application Sub Grou must often be read at leaf level. Furthermore, it is not possible to use hierarchy aggregates for [Z_I_NN_FN]Application Sub Grou or for the remaining InfoProviders.
System Response
Where possible, the system tries to avoid negative impacts on performance. Unfortunately, such performance issues cannot be avoided if the correct results are to be displayed.
Procedure
When working with important MultiProviders, you should always avoid characteristics with CMP problems.
====================
Please advise how to address CMP problem error message when launching query.
regards
Pascal

Hi Pascal,
Why dont you select those compounding objects in Multiprovider itself.As far as i understand while activating the MP it throws an error if compounding objects are not selected.
One more thing to add which i noticed you can try running the query on analyzer if you are running it on RSRT.
You can see the data even if MP is not active on analyzer but not on RSRT.
Hope it helps.
Regards,
AL

Warning Message in Sales Order when Sales price less than Cost Price

HI
Generally when we raise a sales order if Sales price is less than that of Cost price , System will provide us a warning message inside the sales order screen. Now , this is not coming. Is there any settings in the configuration to get this warnin message. Please help us on the above
Regards
Anis

There is no configuration is available for this from functional side.
Try with User Exit MV45AFZZ , for this Co ordinate with your ABAPer.
Regards,
Ramesh

Warning message on log off when application is running

How can I make a warning message when a user is trying to logoff windows while an application made with labview is still running ?
I want to pop something that ask the user if he's sure he wants to quit.
thanks

I was working on just this issue today. Here is a vi (in 7.1.1) and an exe showing it. The exe has been renamed to a .llb to get around some attachment restrictions, so rename it (after scanning with you antivirus of choice!). I can make it in 8.0 if needed (don't currently have 8.2 installed)
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Attachments:
shutdown.vi ‏31 KB
shutdown.llb ‏62 KB

How to modify inputtext in af:query when user change another inputtext

I have Jdev 11.1.1.3
I'd like to change inputtext B (this contain a Date) when I change inputtext A (this contain a another Date).
Those fields are inside af:query.
I try to explain better.
I have created the af:query and user before executing the query selects the start date in inputtext A when he/she comes out with tab, I would like to add one day to the inputext B.
It's possible?
For me, the complexity is that I can not manage the fields inside af:query
Thanks

Hi,
there is no direct access to this. However, you should be able to get the input value to then set a new default value on the ADF BC model for the dependent attribute. After this you PPR the query component to show the new value.
Sample 160 at http://blogs.oracle.com/smuenchadf/examples/ may be helpful
Frank

Tigger event when user change iphone time

It is possible, we can trigger event if user change date and time of iphone.

Did you traced ICI, if any de-register events getting published when you close IE.

Exchange 2013 PF. Add mark as reponsed when user change Category

Hello,
I have public folders with e-mail enabled adress.
When the user open the public folder in his Outlook 2007 & Outlook 2013, and change the Category, Exchange add a mark as this email is responsed.
This can be worse if the folder have an autoresponse added. The "from" remitent address will receive 2 autoresponses, one when he send the mail for first time, and another when WE change the category of his e-mail.

Hi,
How did you set the auto-response feature? Is it an Outlook rule or Transport rule on Exchange?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Problem when user change between fields in ALV

Hi guys.
The problem is: In ALV reports, EDIT mode, when I change between fields, the new field gets selected (the data get selected in blue or gry color), so I can write over new values. The problem is that some users when try to change to another field, the new field doesnt get selected, so he needs to select all the value and then write the new values. Is it clear?
I checked with the user in another PC using his user in SAP and when she changes to another field, the new field gets selected. Then I checked in her PC doing the same, and when I moved to another field, the new field doesnt get selected, so i need to select myself and then write.
In my PC I can change fields, tabbing, and the new fields get select, but in her PC i can't do that.
Is it a problem of windows? or SAP logon?
Does anybody know about this issue?
Regards
Miguel
Edited by: Miguel Alvear on Oct 5, 2011 10:15 PM

I would have checked her GUI version. Maybe she has another version than you !!

Warning message should be raised when user changes Business Area in MIRO.

Similar Messages

Maybe you are looking for