Warning message: Storage location entries exist

When I run program MMREO050 to ARchive Materias I receive this warning message:
MARC:  0000000000650515  7301 dependet storage location entries exist.
For reference:
650515=article number
7301= plant
And if I check MARC, the article is set for deletion.
Mainly, my doubt is to understand what exactly that warning message means.
Thanks a lot!

there may be stocks exists .please check at MMBE and EKPO table for that material also check MB51.

Similar Messages

  • Please guide me how to include storage location to existing material master

    Hi Guru's,
    Please guide me how to include storage location to existing material master....
    please provide step by step process or provide any documentation that would be helpfull to me...
    please let me know of my question is not clear..
    Thanks in advance and will give full points....
    Srinivas...

    Hi
    First :- You can define the storage loctions in the plant under the customization :- SPRO -> Enterprise Structure ->Definition -> Materials Management ->Maintain storage location
    Once defined under the plant, you can create the same storage locations in the material master
    Second :- Under SPRO -> MM -> Inventory -> palnt parameters, for your plant check the field " Create Storage locations Automatically" . This will lead to create new storage locations at the time of GR, even if you have not maintained under step 1.
    Hope it answers your question.
    Regards,

  • Storage location entry in ASN is not reflected in MD04 screen

    Hi Gurus,
    We are using scheduling agreements with confirmations (ASN) . For some business reason we change the storage in inbound delivery created against the SA . However change effect of storage location  is not reflected in MD04 .
    In MD04 screen storage location is getting defaulted from the scheduling agreement .
    Why the system is not considering the storage location from the inbound delivery ?
    Thanks in advance

    Thanks for the reply.
    Indeed it will appear in MD04 if you change in SA. However I don`t want do that , in certain cases only I want change at IBD level which should reflect in MD04. Is there a way to achieve this ?
    Thanks in advance

  • IT105 warning message "user does not exist in this period"

    Does anyone know if we can change the warning message on IT105 subtype 0001 to be an error message?  This is causing an issue when HR are entering the User ID before it's been created in SU01, so sometimes there is a mismatch.
    Hope you can help, thanks in advance!

    This message is hardcoded as a warning in the method CHECK_USERID_EXISTENCE. Like it was suggested above, you will need an access key to change it into a message type 'E'. Other option is to do this validation via the AFTER_INPUT Method of the BAdI HRPAD00INFTY.
    ~Suresh

  • Changing default Mail message storage location

    Hello,
    I'd like to start storing my mail messages by default on a wireless enabled HD that I just recently purchased. Is this even possible? I have a desktop machine as well as a laptop that I use around the house. Ideally, I'd like to have identical mail setups on each computer, that way I'm never scrounging around for sent messages or having to switch back and forth to remember which computer I sent a reply from.
    What I'm hoping is that if both mail programs are accessing the same message storage destination, then the messages will be the same on both computers. Can this be achieved?
    Thank you for your help!

    This is what IMAP is for
    Theoretically, I suppose you could do it by creating a directory on the external harddrive and then symlink ~/Library/Mail to it on each machine. Might be a little slow over the network though.

  • Maintain new storage location for existing material codes

    Dear,
    We want to extend material master to more storage locations. Currently we have coding starting from 910000 for finish material and is configured for storage location FG01, now we want to extend all the codes with 91 series to storage location PR06 & QC01
    The same needs to be done for many other material codes with different series.
    Kindly give suggestions/solutions
    Thanks
    Vikram Sanghvi.

    Hi,
    You can use extend the material from Plant to plant or from Storage location to storage location.
    or 2nd is that Go to SE16 to get all material from MARD Table. then
    export in Excel and go to Mass mainteince in material master to extend the material.
    try this one
    http://www.sap123.com/showthread.php?t=158
    this may  help U !
    Regards,
    Pardeep Malik

  • Firefox "The procedure entry point PK11_Derive With Template nss3.dll" wont start warning message?

    Firefox will not start warning message "The procedure entry point PK11_Derive With Template nss3.dll" after IE update and zeroing cookies.

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Error:storage location for material's valuation type does not exit

    create physical inventory document for material , it has a error message "Storage location X105 for material 0004AA00 plant 1151 valuation type **** does not exist", MMSC is ok, so i don't know what question?

    Hi Yan,
    If no previous goods movements have been posted yet for the combination  of the relevant material, plant, storage location and valuation type  the physical inventory cannot be done.                                                                               
    The table MCHB is used for both batch managed materials and materials  with split valuation. You can only create a physical inventory document for a material with   split valuation when both, a MARD and a MCHB segment are available.              
    When you create a valuation type in the material master, only the table  MBEW is updated - an entry is not created in the table MCHB. This is needed however to perform a physical inventory for this material.                
    This MCHB segment is created when you perform a goods receipt for the material, but (like with batches) a physical inventory posting cannot   create this entry in the table.                                                                               
    You will need to create a material posting for these materials if you wish to create a physical inventory for them. On the other hand, please,    consider that it is not necessary to create a physical inventory for those materials which have not suffered any goods movement at all.                                                                               
    If you want to make a physical inventory for a material valuated separately, you have to proceed as follows:                                                                               
    - make a goods receipt (561)==> then the stock segment will be created           
    - make the reversal of the goods receipt                                         
    - make the inventory.      
    Hope this can help
    Regards,
    Mauro

  • T code MB5B , the storage location will be reset

    dear All,
    I want to see stock on posting date of particular storage location with values. When i try T code MB5B and select valuated stock, (it says storage location will be reset). and i used another T code MC.9 and MC49 , but these T codes didn't meet our requirment .
    the T Code MB5B , i can see the Material number, Material Description, Opening Stock, Opening Value, total Receipt Quantity, Total Receipt Values, Total Issues QNT, total Issues Value, closing Stock QNT, closing Stock Value.
    i need these fields appears but per Storage Location.
    Thanks a lot.
    Mosab Ahmed Mostafa
    Senior Application Consultant
    Amer Group
    Egypt, Cairo

    Hi Mosab,
    The system rejects any value entered in the fields "Storage Location",
    "Movement Type" and "Batch" if you select the Valuated Stock mode for
    the execution of MB5B.
    Regarding the Storage Location, the system clears this field with the
    message "Storage location will be reset" - Message no. M7284.
    As soon as the Valuated Stock mode is selected, the system must remove
    the Storage Location. The reason for this behaviour is that there is
    not information on material's values on Storage Location level.
    - MB5B in the Valuated Stock mode reads the entries from the material
    valuation table MBEW of a material and valuation area to get the current
    valuated stock and value.
    - Then it reads the related MM and FI documents to calculate the stock
    and values on start date. A valuation area could be assigned many
    storage locations.
    The related MM documents can belong to many storage locations.
    In the case there are stock transfer postings from plant to plant
    the MM documents do not contain a storage location.
    So it makes no sense to calculate and display the valuated stocks
    and values on Valuation Area level when the number of the selected
    MM documents is incomplete. MB5B will deliver wrong results in this
    case.
    BR
    Nadia Orlandi

  • How to Capture warning message in SHDB recording

    Hi SDN,
    I am getting problem in Recording FB03 through SHDB.
    when i am clicking on save as complete button i am getting a warning message as duplicate entry.
    when click on enter button the actuval object got saved bu from recording it is not captured.
    how we can continue with this

    Hi
    Sorry
    i know that
    i don't want to display messages.
    when i am recording a Transaction code.
    i am getting a warning message as check for duplicates.
    when click on enter button that warning message is got disappiared but that enter click is not recorded in FB03 recording.
    when i process that recording it is stopping that transaction code at that warning message in BDC.
    please suggest

  • Storage location and post.chge storage location not in the same warehouse

    Hi All,
    We have HU managed Storage Location, and in this Storage Location we have SUT managed Warehouse, Now while Goods Receipt we have to create inbound delivery, which is working fine and i can see my stock in Goods receipt area,, later on whicle creating Transfer Order to putaway in a bin i have a error message "Storage location and post.chge storage location not in the same warehouse" please help me with this error message. Thank you for all your inputs.
    Regards
    Samuel

    Hi Nagesh,
    Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
    Regards,
    Samuel

  • Automatically creation of storage location for material, in MF60

    Hi all,
    my collegue of PP module uses MF60 transaction.
    When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
    In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
    Why MF60 does not respect this requirement?
    If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
    Is there something more that I have to do?
    Thanks in advance!
    Best regards
    Alba

    Thanks a lot...
    the note says:
    Summary
    Symptom
    A material without storage location view exists.
    If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
    Additional key words
    OMC3, XLAUT
    Cause and prerequisites
    All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
    Solution
    The system behaves correctly.
    Header Data
    Release Status:     
    Released on:     07.07.2000  22:00:00
    BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
    AND if doMF60  (that does mouvement 311), system does not create automatically the storage location?
    Best regards
    Alba

  • How to block movement type 261 and 262 from several storage locations

    Dear Expert,
    Can we block the  261 and 262 movement type from several storage locations? These storage locations are not affected by the MRP run, where for the materials that have been moved to these storage locations their existance are not count. These storage locations could not be used for confirmation production order, therefore i want to block  261 and 262 movement type from these storage locations.
    Thanks
    Pauline

    Dear Pauline,
    if my understanding is correct abt ur query,
    1) you want in confirmation screen, Consumption should happen only from one storage location
    2) Rest all storage locations should not be allowed
    3) Maintain Storage location in BOM component view, in mass you can maintain in CEWB
    4) Now GO with SHD0, Make storage location field as Out put only, for CO11N Transaction
    Plz refer this link for SHD0 Demo
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
    Regards
    Madhu Kumar

  • MB5B Movment type and storage location is reset

    When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
    However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
    Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
    However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
    Please tell me why does this happen when the radio button "valuated Stock"  is active ?

    Dear All,
    I am facing the problem as said in the thread.
    My two queries are as follows:
    Query 1:  In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
    M7284 - Storage location is reset.
    M7298 - Movement type is reset .
    Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
    Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
    ie  have received material = 100 Nos 01-12-2009
    cancelled grn:100 Nos
    Redo grn:100 Nos
    Done transfer posting 415 Q = 10 nOS = 02-12-2009
    Issued = 10 nos = 02-12-2009
    In mB5B 01-12-2009 to 02-12-2009
    We are getting Opening stock= 0 which is correct
    Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
    Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
    Closing stock = 90(CORRECT)
    Here actual recipt: should be 100
             actual issue should be 10
    Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
    Please give your valuable suggestions to the above two problems seperately.
    Regards,

  • Sampling Point / Storage Location in Inspection Lot

    Hello,
    We are looking for sampling point / storage location entry in Quality Certificate while dispatching it to customer, but these two fields are not available in inspection lot. Is there any possibility of making either of these two to enter while creating manual inspection lot so that same can be used as a link for the purpose of dispatch of Quality Certificate with the Sampling point / storage location information to the Customer.
    Regards,
    Puneet

    Hi
    Use User Exit
    QPL10004  in QA01
    This enhancement allows you to display or change additional data on the
    screens for the inspection lot transactions.
    maintain Sampling point / storage location here
    Regards
    Sujit

Maybe you are looking for