Warning Message - Tracknumber of CEvLaunch too high! Help?

Hi there
I am attempting to import a midi file I found online into GarageBand 09 but I get the following pop up
*Beta-only warning message - not to be localized:*
*Tracknumber of CEvLaunch too high!*
I'm not really too sure what this means? Does it maybe mean the volume is too high? Or there are too many tracks for Garageband to cope with?
When I click OK a few times on the pop up it then pops up
*Launch Event without associated track found!*
*Changed to track 1.*
I then have only 3 tracks for this song when I know there are many more.
I want to be able to hear and use all of the tracks form this midi file in GarageBand 09.
FYI when I play the midi file with Quicktime 7 it sounds fine, with all the tracks being audible.
Can anyone help?
Thanks!

I have a way around this message popping up (but would still like to know why this error appears).
I downloaded this free program
*Midi File Editor 2.01*
Available here
http://mac.softpedia.com/progDownload/Midi-File-Editor-Download-71782.html
Opened the file, and then saved it as a new name.
Imported it to GarageBand and it worked with no errors (although the instruments are way off)
Its a very old feeling program Midi File Editor 2.01, but hey, it worked!
Yay!

Similar Messages

When burning a bluray I get this error message: Total bitrate is too high near time = 4.760000

When burning a bluray I get this error message: Total bitrate is too high near time = 4.760000
The video is encoded with sonic cinevison as avchd file and one AC3 file.

What can I do to avoid it?
Well, about the only thing you can do to solve "bitrate too high" errors is to lower the bitrate.

Error message Translational currency is too high when posting GR for a PO

Hi,
I am trying to post a GR for a PO,with document currency say in GBP and local currency in EUR,when i tried to post a GR the system gives the message with-"Translational currency is too high" and also the value updated for previous GRs(for a qty 10) is vary high like 37,056,361,610.68 GBP,just i want to know how this value is picked by the system,i know exhange rate table maintained is plays important role,but the value i am getting is too high which is not at all related with rates we maintained in the table TCURR.
I want to know why system is giving such a high value.
further PO quantity is 17,000 and net price is 1 GBP.
we have posted very sucessfull GR earlier,but now this high value and error in GR we are facing.
with regards,

Hi,
Good afternoon and greetings,
Wishing you a Happy New Year 2007
Please go through the following OSS Note
Note 191927 - Posting logic: GR for foreign currency PO
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Tracknumber of LAUNCH too high!

What does that error mean? I get it very often when undoing edits in matrix editor. I have to click OK for several times for it to appear, and it does get quite annoying.
I searched the manual and web thru and only found one similar post in other forum, but no answers to it.

I don't know the meaning, but when I encountered it once before the only solution I found was to start a new song, copy the audio configuration from the damaged song into the new song, and then copy and paste all the tracks into the new song. Painful, but it worked

DVD STUDIO ERROR - BITRATE TOO HIGH? HELP

I am trying to burn a DVD (about an hour) that I imported as a Quicktime movie (edited in FCP) and I made a Menu, and everything looks fine. When I try to Build/Format, I get almost all the way done, when I get an message of "Video Birtare Too High"
I've tried lowering my bitrate a couple of times, and still same problem. What should I do? (I've lowered it to a total of 8 for each video clip - 2 total)

http://dvdstepbystep.com/faqs_3.php
DVD Specs have a max rate of 10.08 Mbps, though some players will stutter or have playback issues when reaching close to the limit. All video, audio, and subtitles count to the max rate. The max rate for the video is 9.8 Mbps, again some players have issues when approaching the max rate. These max rates will also cause video bitrate too high (so if you have these things on one track can also cause an issue)

Urgent help! VIDEO BITRATE TOO HIGH

i have prepared a very simple project - 1 menu and 1 track - and when i try to burn or build and format the build is cancelled and the error message reads VIDEO BITRATE TOO HIGH. What am I doing wrong? Last week I successfully made a much more complicated DVD and havent changed any of the settings...

Figure out the rates for your video and audio here
http://dvd-hq.info/Calculator.html & http://www.videohelp.com/calc.htm
to try to find what bitrate works for encoding, then encode outside DVD SP. (Make new ones with files with distinct new names. Merely changing the settings insdie of DVD SP will not work except for new projects, this way is quicker.)
Remember to A.Pack your audio also.
Even if the settings worked last time, if you exceeded the rate for DVDs (and encoding can have spikes in it) this problem can still occur. If you were importing movies straight into DVD SP without A.Pack/Dolby, ths increases the chance of problems.
Usually A.Pack/Dolby of the audio will cure many issues assuming the settings for the video are not excessive.

Video Bitrate Too High

Building Project Portfolio
05/10/29 11:14:33 AM
Build Folder /Volumes/Scratch Disc/FortNite DVD
Starting DVD Build PORTFOLIO...
Compiler Initializing...
Precompiling Project PORTFOLIO
Compiling VMG Information...
Created 29 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 5 PGCs in VTSM3
Created 5 PGCs in VTSM4
Created 8 PGCs in VMG.
5 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Compiling Menu#2 (Menu 2)...
Rendering Menu:Menu 2,Language:1...
Compiling Menu#3 (Menu 3)...
Rendering Menu:Menu 3,Language:1...
Compiling Menu#4 (Menu 4)...
Rendering Menu:Menu 4,Language:1...
Compiling Menu#5 (Menu 5)...
Rendering Menu:Menu 5,Language:1...
Generating Transition: VTSM #01, VOB #1...
Generating Transition: VTSM #01, VOB #2...
Generating Transition: VTSM #01, VOB #3...
Generating Transition: VTSM #01, VOB #4...
Generating Transition: VTSM #01, VOB #5...
Generating Transition: VTSM #01, VOB #6...
Generating Transition: VTSM #01, VOB #7...
Generating Transition: VTSM #01, VOB #8...
Generating Transition: VTSM #01, VOB #9...
Generating Transition: VTSM #01, VOB #10...
Generating Transition: VTSM #01, VOB #11...
Generating Transition: VTSM #01, VOB #12...
Generating Transition: VTSM #01, VOB #13...
Generating Transition: VTSM #01, VOB #14...
Generating Transition: VTSM #01, VOB #15...
Generating Transition: VTSM #01, VOB #16...
Generating Transition: VTSM #01, VOB #17...
Generating Transition: VTSM #01, VOB #18...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
Compiling Menu PGCs...
Writing VTS030.VOB
Compiling Menu PGCs...
Writing VTS040.VOB
4 VTSs and 4 Titles will be created...
Compiling VTS#1 (Track 1)...
Muxing VTS011.VOB
Video Bitrate Too High
Build cancelled
I've been having this problem for a couple days now. I'm not sure what to do. I have 4 videos and they seem to render well under 3 GB, but it's mainly the menu that doesn't work. Can anyone suggest anything? If you have any more questions, just ask.

Well if you're using PCM audio (.aif) you've got no chance with a bitrate that high. PCM audio takes up 1.536Mbps of your total bandwidth. So at 9 you are way over already!
Even if you use DD AC-3 you pretty much have no chance too cause many encoders will spike over the max for VBR or target with CBR and at the bitrate you are leaving no headroom,
Reduce your bitrate, cause as the message says, it's too high,
-jake

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Video bit rate too high - reducing doesn't help

I've not come across this problem before. Now DVDSP tells me my vbr is too high, but reducing it gives me the same message. I'm attempting to put 47mins of SD onto a DVD-R, so not outrageously demanding. I'm not sure where to go from here.

John Howarth wrote:
My problem is happening on a talking head - there is plenty of movement elsewhere in this movie, and that is all compressing correctly. When I reach this particular clip, which has very little movement, the glitches happen when the guy moves his head. It happens nowhere else in the whole 87 mins, and it happens repeatedly on re-encodes in the same clip - not precisely the same frames, but the same clip. Exporting the clip and its neighbours alone, and compressing it, presents no problem when written to a DVD-R
It is strange, so in other words if Clips A, B, and C are all in one movie from Final Cut then the encode shows the problem in Clip B, let's say, but if you break down each section and drop each encoded clips (A,B,C) on a timeline in DVD SP then it looks okay? You mention that it is not the same frames each time, but are they near where the cuts/changes occur or is it throughot the entire section? Could be the encoder or perhaps the DVD Player is getting tripped up there. I have placed Compression markers in problem areas, even if not scene changes or high movement, to help when I had some ghosting with relatively slow rates of movement. I have not had to do it often, but it helped.
Though I think it is probably not related to the following, how many players have you tried it on and which brand of DVD Media are you using? Do you see the same problem when playing from the hard drive in Apple DVD Player and/or the DVD-R in Apple DVD Player? How are you burning the DVD? Straight from DVD SP or otherwise? (You are using the Universal Binary version of DVD SP and Compressor I take it?)
These problems all occur when using Compressor, at 6.2Mbps preset, with ac3 for the sound. Is that just too high? But then why does the rest of the movie play OK?
It probably is not too high if everything else is okay, and more so it sounds like it is a place where there is not much movement. Moving his head should not throw things that far off. Did you mix clips/camera types in Final Cut? When you say glitches, what is happening, macroblocking, skips in playback, jerky movement? Ghosting?

Help! RE: Bitrate Too High!!

I'm still using DVD StudioPro 2. I've imported the ".m2v" and ".aif" files generated from iMovie2 and Quicktime. I used a 2 pass variable option.
After loading both files into DVD/SP2, when I try to simply "build" the file, it goes 20%, then gives me the error message, "Video Bitrate Too High." I've gone back into preferences and changed many times, even trying a one pass, with '5' as the highest rate, but still get the same error message.
The DVD project is a 10 minute promo for a company...no menus, just auto play. I can't problem solve why it's doing this.
Help?
Matthew

Matthew,
Keep in mind that you need to include the AIF bitrate into your calculations. If you encoded your video using a variable bitrate (regardless of single or dual pass) and it peeks at anything over 8.2, you'll exceed the maximum bitrate of 9.8 (given that AIF stereo files are typically 1.536Mb/s).
One way to try correcting this is by encoding your AIF files into Dolby Digital or DTS.
Some of the info I wrote up in my FAQ-O-Matic may help...
http://nedron.net/cgi-bin/suid/dnedrow/fom?file=34
-David

BluRay error message "code 6, audio buffer underflows. Total bitrate is too high near time = 000000 seconds."

Hello,
I’m trying to create BluRays using Encore and I keep getting the following error messages: ‘code 6, audio buffer underflows. Total bitrate is too high near time = 000000 seconds.”
For info, I created a H264 Bluray - NTSC 24fps master from an Apple prores HQ in Adobe Media Encoder. Duration: 52m, size: 11go. I'm on Mac OSX 10.9.5, the bluray burner is Samsung SE-506CB/RSWD and the BR disks are TDK Blu-ray Disc 50 Spindle - 25GB 4X BD-R - Printable.
I looked around in forums and tried the following without success: replacing disk name to shorter name without space, creating bluray without menu frame, I also tried with a Mpeg2 bluray master. I tried to export a new master but I can't seem to be able to change the audio bitrate.
Can anyone please help ?
Thanks.

Hi Stan, thanks for getting back.
I tried to create a new master from Media Encoder but I can only export audio in PCM, I don't get a dolby option. See pic below.
I tried a new project in Encore and chose PCM instead of Dolby in the preference menu, but I still got the same error. Should I try again limiting bitrate to 15 ? I was on 30 before.
Please help, I've already wasted 10 bluray and this is getting really frustrating!

Rounding difference too high Message no. G4042

Dear Experts
When i am doing transcation F-04 post wtih clearing system gives message "Rounding difference too high " although entries are equal.
Please reslove it as soon as possiable.
Regards

Hi,
Looking at the error, it is JVA triggered.
G4 042 error could occur because of multiple reasons.
Without looking at the system, it would be difficult and would not be right to comment.
The solution as I can see is a 2 step approach,
1. Implement all the latest (release for all) notes handling G4 042. Simulate the test case.
2. If step1 doesnot help, please raise a OSS with SAP. The concerned expert can then comment on the issue
after debugging the program.
Regards,
Satyajit

Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!

Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!

Welcome to Apple Discussions!
Is all the software on your computer up to date?
iTunes
iPod Updater
Also, try The Five R's
btabz

Hi, im trying to download pictures from my camera but when I connect the lightning to usb camera adapter i get the message that there is too much energy required to support the device, can anyone help me?

Hi, I´m trying to use the lightning to usb camera adaper, but I get a message that ¨there is too much energy needed to support the device¨, so I can´t download my pictures, can anyone help me?

This discussion may help.
It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

Warning message about Rx power high on Catalyst 4900M

We get the following warning messages in the log on our 4900M:
Dec 12 09:21:37.367 EST: %SFF8472-5-THRESHOLD_VIOLATION: Te3/8: Rx power low warning; Operating value: -12.1 dBm, Threshold value: -9.9 dBm.
Dec 12 09:31:37.537 EST: %SFF8472-5-THRESHOLD_VIOLATION: Te3/8: Rx power low warning; Operating value: -12.1 dBm, Threshold value: -9.9 dBm.
the 4900M is connected to a 3560E at port Te0/2. No violations are reported on the 3560E.
We have already replaced modules on both the 4900M and the 3560E. We also replaced the fiber patch cables, and moved the patch cables to connect to a backup set of fiber cables.
Additional logs:
4900M#show interfaces transceiver module 3
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Tx Power Rx Power
Port (Celsius) (Volts) (dBm) (dBm)
Te3/5 33.2 0.00 -2.1 -3.1
Te3/6 31.9 0.00 -1.6 -3.0
Te3/7 30.3 3.22 -2.3 -2.4
Te3/8 29.7 3.23 -2.2 -12.1
3560E#show interfaces transceiver module 1
Transceiver monitoring is disabled for all interfaces.
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Current Tx Power Rx Power
Port (Celsius) (Volts) (mA) (dBm) (dBm)
Te0/1 32.0 0.00 8.1 -2.1 -2.0
Te0/2 31.2 0.00 1.2 -2.6 -3.9
We are unsure what else the issue could be. Any ideas would be appreciated.

Can you provide more detail as to what is in the link between the 4900M and the 3560E?
4900M --- patch cord --- bulkhead panel ---- ? backbone cable ? ---- bulkhead panel --- patch cord --- 3560E
Do you know if there are any other connectors or splices in the network? How many fibers are in the backbone cable? Which transceiver are you using?

Warning Message - Tracknumber of CEvLaunch too high! Help?

Similar Messages

Maybe you are looking for