Warning message under 'Diagnostics'

When I go to >'about this mac' >diagnostics, I noticed this message and am wondering what it means.
Last Run: 27/08/2010 16:13
Result: Failed
Failure type: Memory
Memory slots: DIMM2/J13, DIMM3/J14
I put some extra ram in some time ago...could it be to do with this?
Thanks in advance.

That's it. Bad RAM. Run the Apple Hardware Test program that came with the machine and when the bad RAM is identified, replace it. Hopefully, you have modules with lifetime warranties.

Similar Messages

  • I got no buttom for "warning message" under security tab. /Stefan

    Hallo!
    I got no button for -warning message- under Security in Firefox 35.0.1

    hi stefan, i think i don't fully understand the question yet. can you explain in a little bit more detail what you're trying to achieve in the first place?

  • Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

    Hi,
    I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
    Has any other user had such a problem, and if so, how did they rectify it.
    Any advice would be greatly appreciated.
    Thanks in advance.
    clarinet99

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • WLC Warning Message: Our AP is under attack

    Hi there,
    I receive this Warning message in WLC version 5.0:
    Warning: Our AP with Base Radio MAC 00:1f:6d:b9:48:d0 is under attack (contained) by another AP on radio type 802.11b/g
    So, what does it means? Can someone explain..Great Thanks.

    I am getting the same message, but I've not been able to diagnose the issue yet.
    It seems that the AP is being contained by another wireless system. However, there is no information that I can find to indicate what is "attacking" or "containing" the AP.

  • Warning message in mir4 while posting

    hi friends ,
    In miro while we post the parked document then it display the warning message as "RG23 Part II posting not yet done"  , when we click on enter , the document is posting . But the user wants that as an error message not the warning message. So please tell me in what way i can get the solution.
    with regards,
    prasad.

    Hi
    1. Setting up Vendor/Customer is OK to get net balance as you said
    2. Spl GL account to track share capital also seems OK
    3. For grants, there is a specific functionality under PSM (Public Sector Management) component of FSCM... I guess, this is added in EhP4.. I am not sure if it was there earlier as well
    Fund Mngt can also be tried for funds mngt, but am not too sure... Its better to use the specific functionality
    4. Regarding budgeting in CO, it can not be on individual GL accounts.. To have budget on GL accounts, you need to activate Funds MNgt.... Std budgetary control in CO is @ Internal Order Level
    Regards
    Ajay M

  • How to Suppress a warning message in Reports

    Hi All,
    I am getting REP-32751: Warning: Some text segments are missing warning message when ever i open a report and also while run the report in the browser. I am not able to find the missing text segments. Is there any way to suppress this warning message in oracle reports 10g?. Please let me know.
    Regards,
    Prasad.

    Just was curious and was in Metalink anyways and looked up your Error:
    >
    Another workaround: open the report under the desired NLS_LANG, and OK all the warning messages. Once the report is opened, save it (under a different name). This will fill out missing text segments with blanks,which is OK because these strings never appear in the report anyway (theyshould have been deleted...)

  • How to load a warning message in the sub_VI in a true 'case' statement.

    I wrote a sub virtual instrument (sub_VI) containg a case structure in which a warning message is supposed to be shown only when a case is true, and this works fine by itself alone. However, when I put this sub_VI in the main VI program, the warning message doesn't come up even when the case under sub_VI is true. Is there any way to show this warning message even with the sub_VI under the main VI ?

    By default, sub VI's do not open their front panel when run. If you are putting your warning message on the front panel, then the message will appear when the VI is run on its own (as the main VI) but not when it is run as a sub VI.
    If you use one of the dialog functions such as the "One Button Dialog" fromt the "Time and Dialog" menu, then the message will appear even if used in a sub VI.
    The other option is to right click on your sub VI and set it's properties to open when run and close again afterwards.
    Rob

  • Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up

    Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?

    Brooks lansing if you create a new Administrator account does the same issue occur?  If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
    Have you removed and reinstalled Photoshop Elements 11?  This may reset the file permissions to the correct state to allow it to work under new accounts.

  • Warning messages in system log after upgrading to SP4

    Hello there, I am starting to see quite a lot of warning messages in the system log saying the following:
    Failed loading JDBC Driver class com.microsoft.jdbc.sqlserver.SQLServerDriver - Exception:java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
    Failed loading JDBC Driver class com.sap.dbtech.jdbc.DriverSapDB - Exception:java.lang.ClassNotFoundException: com.sap.dbtech.jdbc.DriverSapDB
    Failed loading JDBC Driver class org.gjt.mm.mysql.Driver - Exception:java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
    We are using MSSQL as the underlying database, so maybe something needs to be unchecked somewhere? Any ideas?
    Best regards,
    Anders

    Anders,
        I just updated to SP4 and tried a user creation (my database is also MSSQL). I did not see any warnings in the system logs. Like Thomas said you must have extra entries in the Tools/Option/Java/JDBC driver names.
    All you need is just one entry "com.microsoft.sqlserver.jdbc.SQLServerDriver".
    Hope this helps.
    Thanks
    Shabna

  • How to add warning message while using 'print' function in Adobe LiveCycle Designer

    I am trying to make pdf document for my company which requires adding a warning message while anyone use 'print' function from the page...
    Does anyone know how to add warning message on LiveCycle Designer
    Also my supervisor mentioned something using 'nag' if that rings any bell

    No you shoudl never go into the XML source unless uinstricted to do so.
    You can open the script editor (under the window menu). It will appear above the drawing area but below the toolbars. You can resize it if there is not enough room. When you click on an object in the form you can choose an event to script against in the Show dropdown. In your case you will want to choose the prePrint event. A line will show up that indicates the object that is associated with the script as well as the event and other information. Add your script below this line. Once that is done you are finished and your form is ready for testing.
    Paul

  • Windows 7 computers show a Valid Trust Anchor warning message when connecting to corporate wireless

    We are currently using EAP-TLS  Microsoft:Smart Card or certificates" as the Authentication Method on our Radius/NPS server for authenticating domain laptops to be enable to connect to corporate wireless network. 
    We have a Windows 2003 Root& Issuing CA which has published computer certificates to all the domain laptops/workstations. We have also setup a parallel PKI ( Root and Issuing CA) setup on Windows 2012 OS in the same domain. 
    This Windows 2012 ISsuing CA has also deployed computer certificates to a cpl of testing domain workstations.  So the end result, each of these testing workstations has  2 computer certificates in its PERSONAL Store for client/server auth  (1)
    One issued by the Windows 2003 CA (2) Other cert issued by the Windows 2012 CA.
    We are noticing that windows 7 laptops are throwing a warning message similar to as shown below . I have verified that the ROOT certificate coming from both the CA's described above,  is present in the ROOT TRUSTED CERTIFICATION AUTH Store on each of these
    Windows 7 laptops.   Surprisingly, we don't get this same warning on Windows 8 or 8.1 laptops. 
    Also, if i hit the CONNECT button, i am able to connect to the wireless,
    but then i don't see the "Security " Tab anymore under properties of the wireless profile (SSID).   I found on some forums to click on the Security Tab and further click on "SETTINGS" and check if the ROOT CA cert is present
    in the Trusted Root Certification Authorities” list, .  I dont get  these options anymore after connecting.
      These options do show up on Windows 8 machines after connecting.

    in the wireless connection properties, in the dialog authentication properties you need to select root CAs which are eligible to issue RADIUS server certificates:
    Vadims Podāns, aka PowerShell CryptoGuy
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell File Checksum Integrity Verifier tool.

  • Warning message when launching iTunes

    I upgraded to iTunes8 and on launching iTunes, the following error message appears "The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of other CD burning software. Please reinstall iTunes." I then reinstalled the "Repair" from the downloaded file (iTunes8Setup), but the warning message still appears after rebooting my computer and launching iTunes . I then removed iTunes from my computer and reinstalled iTunes from this download (iTunes8Setup). I rebooted my computer and launched iTunes, same result. Any ideas on how I can fix this warning message. Please note this warning message did not appear when launching my previous version of iTunes.

    I do not burn any CD's so don't have one to insert into the drive to test the diagnostics. No I am not running 64 bit version of XP.
    See below results from rinning the diagnostics.
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    ACER Aspire E500
    iTunes 8.0.0.35
    QuickTime 7.5.5
    FairPlay 1.0.15
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.1.0.25
    Bonjour 1.0.5.11 (118.5)
    iTunes Serial Number D1F09C78CC** <Edited by Moderator>
    Current user is an administrator.
    The current local date and time is 2008-09-29 21:28:09.
    iTunes is not running in safe mode.
    Video Display Information
    ATI RADEON XPRESS 200 Series
    SAPPHIRE RADEON X300SE
    RADEON X550
    SAPPHIRE RADEON X300SE - Secondary
    RADEON X550 Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {EFAF9826-1BC6-4217-A75F-70968D938047}
    Description: Bluetooth LAN Access Server Driver - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 04:00:03 1970
    Lease Expires: Thu Jan 01 04:00:03 1970
    DNS Servers:
    Adapter Name: {31029B03-6743-4E35-B15F-555C4A5A585E}
    Description: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 04:00:03 1970
    Lease Expires: Thu Jan 01 04:00:03 1970
    DNS Servers:
    Adapter Name: {1A454B26-0287-4327-8BBC-7F3E9B4D5B16}
    Description: WAN (PPP/SLIP) Interface
    IP Address: 86.97.62.8
    Subnet Mask: 255.255.255.255
    Default Gateway: 86.97.62.8
    DHCP Enabled: No
    DHCP Server:
    Lease Obtained: Thu Jan 01 04:00:00 1970
    Lease Expires: Thu Jan 01 04:00:00 1970
    DNS Servers: 213.42.20.20
    213.42.20.20
    195.229.241.222
    Active Connection: ADSL USB MODEM DIAL-UP
    Connected: Yes
    Online: Yes
    Using Modem: Yes
    Using LAN: No
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2008-09-28 06:05:23.
    ** CD/DVD Drive Tests **
    No drivers in LowerFilters.
    UpperFilters: NTIDrvr (1.0.0.6),
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.0.0.35 is currently running.
    iTunesHelper 8.0.0.35 is currently running.
    Apple Mobile Device service 2.10.31.0 is currently running.
    Universal Serial Bus Controllers:
    ALi PCI to USB Open Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA OHCI Compliant IEEE 1394 Host Controller
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number: JQ608FRWTXL
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.

  • How to use warning message

    Hello everyone!
    The message type of 'w' should have a yellow symbol on the status bar, right?
    But when I execute the code below, it produces the red symbol (X)...
    REPORT zmsgsamp
           MESSAGE-ID s1.
    SELECTION-SCREEN BEGIN OF BLOCK a.
    PARAMETERS  :  p_value TYPE i.
    SELECTION-SCREEN END OF BLOCK a.
    START-OF-SELECTION.
      IF p_value EQ 5.
        MESSAGE w899 WITH 'Warning message'.
      ELSE.
        MESSAGE i899 WITH 'Information message'.
      ENDIF.
    Thank you!

    Hi Ricardo,
    Atish is correct. We cannot predict the color of the warning. Even though the color of warning displays like error, the functionality of warning will take place...
    if you put your same piece of code under at selection-screen, warning message with yellow color will be displayed....but inside the start-of-selection..it display like the error message.

  • MAXL Warning Messages

    Hi All,
    Issue is regarding the MAXL limit when we have warnings during Data Load...
    In the CFG file i have DATAERRORLIMIT set as 65000 and i have rejections in the dataload when using Maxl Import command and the errors were directed to one logfile.
    Am able to see the log file with rejections, but one more what we have done in the shell script is capturing the STDERR and throwing a communication when there are rejections... the issue is when i have rejections less than 65000, it won't display the Warning message.
    Done these many things:
    - Modified the CFG and set the DataErrorLimit as 1 and checked..this time we have the warning message in the App.log(DATAERRORLIMIT crossed the specified Limit[1]) but not getting captured as the STDERR and hence not to the file.
    - i was not able to see the Warning message along with other OK/INFO messages in the maxl output log file (but in app.log)
    - Tried using set message level option but it is also not working.
    Can anybody help me in this regard and your help is deeply appreciated..
    Thanks

    We're definitely in agreement. I think I was just explaining the value of using the expedient approach and you were emphasizing the "correct" approach, which is why I put my answer the way I did (do the expedient thing but don't forget to address the underlying needs which you already indicated).
    Fundamentally, I find that many of the guru's out there do tend to look at the "correct way" as the only answer (mostly because they rarely get boxed into less than this). The reality for a lot of users is that a compromise is often inevitable along the way. So I tend to only disagree on matters of feasibility.
    I'm struggling with this very thing at my company here. It boils down to the need to split a database up, and the partition/attribute dimension issue is slamming us hard. I'd like to do it the "right way", but I'm ending up with a compromise that adds a little risk and a lot more effort (on my part) than I'm comfortable with. In the end, however, I'm sure things will stabilize in a more comfortable compromise (meaning I'm more likely to become comfortable with the risk and added effort than the CFO and VP of Finance are of letting me deal with it the "right way"). -- it all boils down to choosing your battles, LOL.

  • Webmail giving some starnge Warning messages! Please Help

    Hi,
    After upgrading to Snow Leopard Server, I'm getting strange warning messages in my web mail,
    Find the warning messages below, Looking forward to your support.
    Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 420
    Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 95
    Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 347
    Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/squirrelmail/functions/date.php on line 289
    Thanks,
    Gulab Pasha

    first backup the file you're going to be editing:
    sudo cp /etc/php.ini /etc/php.ini.bak
    then edit the file:
    sudo nano /etc/php.ini
    then hit CONTROL-W (to search for something)
    then type "date.time"
    then hit RETURN
    that should bring you to an area under modules that looks like the following:
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    You can lookup your timezone at http://php.net/date.timezone (for instance"America/New_York")
    then take out the semicolon and type your timezone after the equal sign so it looks like this:
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    date.timezone = America/New_York
    then hit CONTROL-X (to quit nano)
    then hit Y (to save your changes)
    then hit RETURN (to use the same file name)

Maybe you are looking for