Warning Message when entering BIOS!!

hi.. I have a K8N Neo2 platinum, 2*512MB Twinmos DDR400, 80 GB Seagate PATA, PowerColor9800Pro. so.. when I press Del to enter BIOS there is a warning message is shown to me "Warning: Have option ROM can not be invoke (Vendor ID:10DEh, Device ID: 00DFh) NVIDIA RAID IDE ROM BIOS 4.81 Copyright (c) 2004 NVIDIA Corp. Detecting array ..." this is the message. it flashes on the screen and then enters the BIOS.. The problem appeard when I updated my BIOS version 1.8 to 1.A0. I updated 1.B0, but it's still the same. there one more thing; when windows starts my mouse dont work. I have unplag and then plag again to make it work.. What can I do for both of my problems... thanks a lot..

Warning: Have option ROM can not be invoke (Vendor ID:10DEh, Device ID: 00DFh) .
Option ROM is in this case the PCI ROM file embedded in bios for nvpxe ( boot from network)
There is something broken in the bios boot options and this ROM file .
Device ID: 00DF is the
NVIDIA Network Bus Enumerator Driver
It's not normal , and in fact there is something broken for boot options in all 1.9/1.A and 1.B bioses .
My guess it is related to the work msi have done with more usb boot type media .
But it's related to network boot and does not affect most of us as network PXE booting is
seldom used .
Other things thats brooken is boot from addin disk controller PCI cards internal bios .
If you have this you will get a second warning with that cards vendor id and device id .

Similar Messages

[svn] 1594: Update the warning message when outbound throttle policy of REPLACE is used one more time .

Revision: 1594
Author: [email protected]
Date: 2008-05-07 11:10:27 -0700 (Wed, 07 May 2008)
Log Message:
Update the warning message when outbound throttle policy of REPLACE is used one more time. Now the warning says this. . .
Throttle outbound policy 'REPLACE' found on message destination 'MESSAGE_DESTINATION'. The 'REPLACE' throttle outbound policy has been deprecated. Please remove it from your configuration file.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageDestination.java

hamish72 wrote:
You can still download as much as you can only a lot slower during peak times off peak will not be restricted.
Thanks for this explanation. I had taken it that it was at all times.
As I said in the first place it will be great if they throttle me to 1Mb at peak times as it will be better half the time than I am getting anyway!!!!!!!!!
hamish72 wrote:
Have you chased up why your line is so bad, long way from exchange and so on
Posting your router stats may get advice from someone
enter for homehub for other routers will differ
192.168.1.254 in browser click A to Z top right
then ADSL enter pas and click MORE DETAIL
POST RESULTS
Also post results of test at ( best done from master test socket)
http://speedtester.bt.com/
Connection Information
Line state
Connected
Connection time
6 days, 11:57:55
Downstream
5,760 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.7 dB / 21.0 dB
Line attenuation (Down/Up)
44.6 dB / 24.0 dB
Output power (Down/Up)
8.9 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
25279 / 134
CRC Errors (Down/Up)
700 / 196
HEC Errors (Down/Up)
5427 / 142
Error Seconds (Local/Remote)
477 / 102

I get a Warning message when I try to open Lightroom_5_LS11.dmg that it is not recognized

I have just bought Lightroom 5. I get a Warning message when I try to open <Lightroom_5_LS11.dmg> that it is not recognized. I have 0SX vs 10.8.5. How do I open this?

Surrpent please try downloading a fresh copy of the Lightroom 5 installation files at Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.5. The update contains the full installer for Lightroom 5.5.

In iphoto how to get the gold you delete a photo warning message when you check the box not ask

in iphoto how to get the gold you delete a photo warning message when you check the box not ask

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

HT2731 why do i get an error message when entering my credit card information?

why do i get an error message when entering accurate credit card information?

If you would like help from these forums then saying what the error message is would be useful.
The card is registered to exactly the same name and address as you have on your iTunes account ? And it was issued by a bank in the country where you and your iTunes account are ?

Error/warning messages when trying to add a lookup field

I have gotten error and warning messages when I attempt to put a lookup field on a form. Based on a Municipality Code match in the Account table, I want to add to the form the Municipality Name from the Municipality Table.

After taking out a lookup field that was not looking up coreectly, I get this warning message and 3 simailar ones:
The referenced assembly "System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" could not be resolved because it has
a dependency on "System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" which is not in the currently targeted framework ".NETFramework,Version=v4.0,Profile=Client". Please remove references to assemblies not in the targeted
framework or consider retargeting your project.
I got this response on the message board:
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because the issue is on ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET forum
THANKS.

J2SE 6 warning message when using type casting

With Java SE 5 and 6 version, there's always an annoying warning message when I write the following code:
LinkedList<MyBean> cart0 = (LinkedList<MyBean>) session.getAttribute("cart");The warning message is because I use the type casting with the getAttribute method and thus this is not type-safe. So how do I get around the warning message and write standard code that sticks to the J2SE 6 standards? Thank you.

Add a @SuppressWarnings annotation to the method. A bit intelligent IDE will provide you a quickfix option for it.
Keep in mind: it's a warning, not an error. The sessionMap is cannot be specifically parameterized and will never be, it should be able to store any object to your taste. Further on this has not much to do with JSF at itself.

I am getting a warning message when i am trying to create a host-named sitecollection.

Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.

First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Warning message when cliking on "montage" on a French version

Hello
I'm using Imovie 6HD with Imovie 7.1.4 on my HD.
When I try to add transition on my projet, I've got these warning message :
Le module Circle transitions est defectueux. Circle transition module is not good,
same message for Flash, ghost trails, mirror, Nsquare, radia transition, subtitles, warp transition, wash, zoom title and vitrix stample.
I delete Imovie6HD ( What was in librayrie apllication support, documentation and spotlight), pref too, re-install Imovie 6HD from package doanloded from apple site, repair autorization, reboot.
I tried to copy and paste from another computer witch works well, plugins from the Imovie package contents without success...
Nothing works,
Any idea ??
Thanks
Bruno
Message was edited by: bcallais

I tried to copy and paste from another computer witch works well, plugins from the Imovie package contents without success...
Looking forwards...
Bruno

Warning Messages when starting Application

Hello,
I get those messages when starting my application:
WARN - [ConverterRule]{faces-config/converter} Merge(null,java.math.BigDecimal)
WARN - [ConverterRule]{faces-config/converter} Merge(null,java.math.BigInteger)
WARN - [ManagedBeanRule]{faces-config/managed-bean} Merge(Login)
WARN - [NavigationRuleRule]{faces-config/navigation-rule} Merge(/home_new.jsp)
WARN - [NavigationRuleRule]{faces-config/navigation-rule} Merge(/records/index.jsp)
WARN - [NavigationRuleRule]{faces-config/navigation-rule} Merge(/admin/*)
WARN - [NavigationRuleRule]{faces-config/navigation-rule} Merge(*)
WARN - [ManagedBeanRule]{faces-config/managed-bean} Merge(Record)
WARN - [ManagedBeanRule]{faces-config/managed-bean} Merge(User)
WARN - [ManagedBeanRule]{faces-config/managed-bean} Merge(conLayout)
WARN - [ManagedBeanRule]{faces-config/managed-bean} Merge(UserMgr)
WARN - [ManagedBeanRule]{faces-config/managed-bean} Merge(AdmMgr)
WARN - [ComponentRule]{faces-config/component} Merge(MessageImg)
Should I do something to avoid those messages?
Thanks
Rene

JSF sees and merges all configuration files listed below:
(1) WEB-INF/faces-config.xml
(2) some xml files you specify using the context-param element of WEB-INF/web.xml
(3) META-INF/faces-config.xml files included in all jar files
Check the all configuration files and see whether they have doubled elements
and merge them.

Getting warning message when using bulk option

Hi
I have a very strange problem. When I am trying to insert records into my table (Using Buld Loader Options) I am receiving warning says "ODBC data source <xxxxxxxx> warning message for operation <bcp_bind ScheduleID>: <[Microsoft][ODBC SQL ServerDriver]Invalid use of null pointer>, SQLState <HY009>."
but when I remove the selection of Bulk Loader option then it works fine and run successfylly without any warning ...
SQL Query -
> Target
Can anybody please help me in this case as i could not figure it out what could be the problem
Edited by: Jerry Tsia on Apr 27, 2009 6:18 PM
Edited by: Jerry Tsia on Apr 27, 2009 6:19 PM

what is the version of DI or Data Services ? if you are using DS XI 3.0 (12.0.0.0) or DS XI 3.1 (12.1)
then this issue if fixed in 12.1.1, check the following similar post related to this
Can not load Nulls into INT column using MS Sql Server 2005 Bulk load api

Warning message when launching iTunes

I upgraded to iTunes8 and on launching iTunes, the following error message appears "The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of other CD burning software. Please reinstall iTunes." I then reinstalled the "Repair" from the downloaded file (iTunes8Setup), but the warning message still appears after rebooting my computer and launching iTunes . I then removed iTunes from my computer and reinstalled iTunes from this download (iTunes8Setup). I rebooted my computer and launched iTunes, same result. Any ideas on how I can fix this warning message. Please note this warning message did not appear when launching my previous version of iTunes.

I do not burn any CD's so don't have one to insert into the drive to test the diagnostics. No I am not running 64 bit version of XP.
See below results from rinning the diagnostics.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
ACER Aspire E500
iTunes 8.0.0.35
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.0.25
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number D1F09C78CC** <Edited by Moderator>
Current user is an administrator.
The current local date and time is 2008-09-29 21:28:09.
iTunes is not running in safe mode.
Video Display Information
ATI RADEON XPRESS 200 Series
SAPPHIRE RADEON X300SE
RADEON X550
SAPPHIRE RADEON X300SE - Secondary
RADEON X550 Secondary
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {EFAF9826-1BC6-4217-A75F-70968D938047}
Description: Bluetooth LAN Access Server Driver - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:03 1970
Lease Expires: Thu Jan 01 04:00:03 1970
DNS Servers:
Adapter Name: {31029B03-6743-4E35-B15F-555C4A5A585E}
Description: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:03 1970
Lease Expires: Thu Jan 01 04:00:03 1970
DNS Servers:
Adapter Name: {1A454B26-0287-4327-8BBC-7F3E9B4D5B16}
Description: WAN (PPP/SLIP) Interface
IP Address: 86.97.62.8
Subnet Mask: 255.255.255.255
Default Gateway: 86.97.62.8
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 04:00:00 1970
Lease Expires: Thu Jan 01 04:00:00 1970
DNS Servers: 213.42.20.20
213.42.20.20
195.229.241.222
Active Connection: ADSL USB MODEM DIAL-UP
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-09-28 06:05:23.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: NTIDrvr (1.0.0.6),
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.0.35 is currently running.
iTunesHelper 8.0.0.35 is currently running.
Apple Mobile Device service 2.10.31.0 is currently running.
Universal Serial Bus Controllers:
ALi PCI to USB Open Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
Serial Number: JQ608FRWTXL
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

Warning message when installing Oracle 10g

Hi
Does anyone know what this warning message mean? I got this message when I install the Oracle 10 g software:
Check Status
Check network configuration requirments Warning
Is this important to install oracle correctly? Or I can just ignore it?
Thanks in advanced!
Li

Check network configuration requirments Warning
If your on LINUX then you should configure network after installation.
Checking Network Configuration requirements ...
Go Application ----> System Settings ----> NETWORK
On Network Windows CLICK ON edit tag.
set STATICALLY set IP ADDRESS
ADDRESS 192.168.100.252
SUBNET MASK 255.255.255.0
or
edit HOSTS tags on Main windows and give your HOSTNAME.
ACTIVATE<<<< click on main page.or
edit "/etc/hosts" FILE LIKE
[root@alwarid-taj ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
192.168.100.252 alwarid-taj
127.0.0.1 localhost.localdomain localhost
[root@alwarid-taj ~]# hostname
alwarid-taj
[root@alwarid-taj ~]# ping 192.168.100.252
PING 192.168.100.252 (192.168.100.252) 56(84) bytes of data.
64 bytes from 192.168.100.252: icmp_seq=0 ttl=64 time=0.085 ms
64 bytes from 192.168.100.252: icmp_seq=1 ttl=64 time=0.054 ms
64 bytes from 192.168.100.252: icmp_seq=2 ttl=64 time=0.053 ms
--- 192.168.100.252 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.053/0.064/0.085/0.014 ms, pipe 2
[root@alwarid-taj ~]#regards
Taj

How to turn off the warning message when re-compiling jsp in embedded OC4J?

Members,
I would like to remove the annoying warning messages whenever we re-compile a jsp file using embedded OC4J.
Steps:
1. create an web project
2. create a test jsp file (say, test.jsp)
3. run the jsp file.
4. on the jsp visual editor, modify the jsp file.
5. go to the browser, reload the page. the following warning messages are displayed:
06/03/03 08:09:13 Warning: directory C:\Projects\TestAgain\UserInterface\public_html\WEB-INF\classes doesn't exist on classpath
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:31: warning #556: variable session assigned to but never used
06/03/03 08:09:14 HttpSession session = pageContext.getSession();
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:32: warning #559: variable __jsp_tag_starteval declared but never used
06/03/03 08:09:14 int __jsp_tag_starteval;
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:33: warning #556: variable application assigned to but never used
06/03/03 08:09:14 ServletContext application = pageContext.getServletContext();
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:35: warning #556: variable page assigned to but never used
06/03/03 08:09:14 _test page = this;
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:36: warning #556: variable config assigned to but never used
06/03/03 08:09:14 ServletConfig config = pageContext.getServletConfig();
06/03/03 08:09:14 ^
06/03/03 08:09:14 C:\Projects\TestAgain\UserInterface\classes\.jsps\_test.java:37: warning #556: variable __ojsp_varRes assigned to but never used
06/03/03 08:09:14 javax.servlet.jsp.el.VariableResolver __ojsp_varRes = (VariableResolver)new OracleVariableResolverImpl(pageContext);
06/03/03 08:09:14
I'm so much glad to see JDeveloper giving out all the details and warnings, but sometimes they spit out too much warning messages that simply annoys and distracts my programming.
There seems to be no parameters for me to shut those up, maybe I should do it manually?
thanks.

Ronald,
I've already tried setting up the j2ee-config.xml file, but
it seems that the warning message does not come from the oc4j, but is generated when jsp file is being compiled, so no matter what you do with the j2ee-config.xml, it would not work to remove the warnings.
I was thinking maybe I could setup the java compiler option found in server.xml, by adding -nowarn option in javac options attribute, but it seems that the file server.xml gets overwritten automatically whenever the oc4j restarts (so, no avail).
So... any other ideas?

When attempting to buy mountain lion, "unknown error has occurred" is message when entering ITunes ID and password and am unable to download app.

"Unknown error has ocurred" message when trying to buy Mountain Lion on my MacAir laptop. Apple ID and password are operative with IPhone device but will not operate with ITunes purchase of Mountain Lion and ITunes advisor simply referred me to these discussion communities. What to do???

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Warning Message when entering BIOS!!

Similar Messages

Maybe you are looking for