Warning messages repeated

I know that mDNSresponder and nmbd and krb5kdc are normal parts of Apple software (according to messages I've read here), but these warnings, including a message about my time and date being wrong, have appeared two days running now. What causes them? The only update I've done recently is of Skype but that was a week ago.

Did you update it?

Similar Messages

Repeating warning message everytime I sync - help

Everytime I sync my iphone (4) i keep getting warning messages for "a newer version of x app already exists in library. do you want to replace it?" It does this for a lot of the apps I have and it doesn't matter which option i select, it still comes up again the next time I sync.
What gives? Its getting very old having to choose an option everytime for 8-12 different apps.

Have you checked to make sure the Date and Time are set correctly on your iPod Touch? Did you also make sure that the time zone was correct as well?
I'm assuming the date, time, and time zone are also set correctly on your iMac?
Have you tried restoring the iPod from a backup in iTunes to see if that helps?
B-rock

Warning Messages related to Reconstruct Availability Control for Project

Hi Gurus,
In Transaction IM52 - Change Original Budget for Investment Management Program, after changing the Budget Values of Investment Management Position and when we check the transaction for error, we get Warning Messages, the warning message is as follows:
You Must reconstruct the availability control for Project P.000XXX.
We tried to reconstruct the Availability Control in Transaction CJBN and again checked for errors in IM52, then also we get Warning Messages.
As these are only Warning Messages we can ignore and save the modified budget values for the Investment Management Program. But we want to know whey these Warning Messages are keep on cropping up inspite of reconstructing the Availability Control for Project.
You inputs on this will help us immensly.
Thanks,
KRN

hi KRN!
I am also facing the same issue.
Even if i am having enough budget, while making a PO, the system says " Budget exceeded".
i could processs the PO, after performing CJBW (deactivate), CJEN (refresh) and then performing CJBV ( activate availabilty control) for that project.
This is repeating everytime i make a PO. is there any permanent solution?
Even after performing all the above, if i check in IM52, and check for budgets (perform from menu), the error is " You Must reconstruct the availability control for Project P.000XXX"

Vendor Payment TC F-58/F-53, warning message for selecting NON DUE invoices

Hi,
I have scenario with my client, they want that during manual vendor payment against TC F-58&F-53, if the invoices are not due for payment but if selected by the user during manual payment, is there any configuration by which system will give a warning message to the user saying invoices are not due for payment before saving the document.
Thanks
MRS

You have to find the appropriate "Message Area" and "Message Number" in "Maintain Message Control".
Add the message into the Message Control and make it as WARNING message.
<< Moderator message - Point begging removed >>
<< Begging for points is against the furum rules. Repeated violation of forum rules can result in your userid being deelted. This is the third time you have been warned.>>
Thanks.
Edited by: Rob Burbank on Jan 18, 2011 3:57 PM

Export "Warning" message

I’m using the export command/function to create a .pdf file, and I’m getting this “Warning” dialogue box:
“There is overset text on these pages”
Does this mean the file will automatically have printing/other problems? Or is it a generic phantom message?
As I understand it, offset printing will be used.
Thank you in advance – Bruce
Mac OS X 10.5.8
CS4 6.0.3

I had this warning message too, but could not find any text box with a red plus sign indication. I finally figured out where the offending "empty" text box was on my page by pressing
Object -> Select -> Next Object Below or "CTRL + ALT + ["
repeatedly to highlight every object on my page, one at a time. Ultimately in my case, an empty box I created by accident some during the early design was highlighted with the red plus sign. Deleting this object fixed my problem.

ADF Warning Messages

While testing my UIX application in JDev 10.1.2, I see many, many warning messages like:
05/04/21 07:40:40 [400] **** refreshControl() for BindingContainer :searchUIModel
05/04/21 07:40:40 [401] **** refreshControl() for BindingContainer :searchUIModel
05/04/21 07:40:40 Rendering page = Page[name=simpleSearch]
05/04/21 07:40:40 [402] **** refreshControl() for BindingContainer :searchUIModel
05/04/21 07:40:40 [403] Warning! Using introspection to lookup and return value for :rowIterator
05/04/21 07:40:40 [404] Warning! Using introspection to lookup and return value for :rowIterator
05/04/21 07:40:40 [405] Warning! Using introspection to lookup and return value for :DCIteratorBinding
05/04/21 07:40:40 [406] Warning! Using introspection to lookup and return value for :DCIteratorBinding
05/04/21 07:40:40 [407] Warning! Using introspection to lookup and return value for :DCIteratorBinding
repeated messages deleted
05/04/21 07:40:40 [432] Warning! Using introspection to lookup and return value for :DCIteratorBinding
05/04/21 07:40:40 [433] Application Module failover is enabled
05/04/21 07:40:40 [434] Getting a connection for internal use...
Does anyone have any idea where these might be coming from? The pages work fine, but it would be nice to know what problem they are attempting to notify me of.
If nothing else, I'd like to turn them off. They are currently almost 1/3 of the messages in the log.

Submitted as TAR 4410468.995

A very new and strange warning message from my iPhone

I am getting a very new and strange warning message on my iPhone. The phone will repeatedly - even when sitting idle - flash a message that states, "This accessory not made to work with iPhone. Would you like to turn on Airplane Mode to reduce audio interference ... you will not be able to make or receive calls?"
This message started to flash up on my iPhone after I installed Leopard yesterday evening (11/15/07). I just updated my iTunes software today so I have iTunes 7.5 (19) and my iPhone software version is 1.1.2. Finally, I am not trying to hack my iPhone since I ain't smart enough to do so and, even if I were, I wouldn't want to have a dead phone on my hands.
Any suggestions or thoughts? Thanks.

Charles
I think my first instinct would be to try a Reset of the iPhone, if that doesn't improve things then try a Restore from within iTunes BUT.....
I would also wait awhile and see in anyone else weighs in with other suggestions first.
Good luck
FlatE

I am getting a warning message when i am trying to create a host-named sitecollection.

Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.

First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Warning message in ALV report

Hi Experts,
In ALV report i am getting warning like
" Field string LS_HEADER is not referenced statically"
Actually i declared this field as "DATA: ls_header TYPE slis_listheader.".
How to correct this warning message.
Thanks in advance.
Thanks,
Madhu.

Dear Madhu,
You are not using LS_HEADER statically that you have defined in the program. You will get a warning message since you have defined a field that you have not referenced statically.
Are you using this field dynamically? You can delete/comment the code if you are not using it statically and dynamically.
Moved the thread ABAP forum. Post your queries in relevant forums to get efficient answers.
Regards,
Naveen

Warning message in BW Report through Portal

Friends,
I really need your help to remove the waring message.
For the purpose of changing the description on the Selection screen from Cost Cetnters (Authorised Values) to Funds Centers I had changed the ZCCTRATI variable description to Funds Centers
Issue:
When we open the old report we see the following information message.
" Value if variable ZCCTRAT1 is automatically converted
I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
Can u help me how to remove this ?

Hi Manohar,
Edit to add: Here I assume you have a Web Application Designer (WAD) report.
You can suppress system and warning messages in WAD. Try this and see if it helps.
- Go to your WAD report
- In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
- Click Web Item
- Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
Hope this helps,
Regards,
Petter
Message was edited by: M Petter

Error message into warning message KO450

Hi,
There are unsettle RA value in project PAD-9114. Because of this unsettle RA value in the project we are not able to close the project and receiving error message like below:
1.There is still WIP for wbs
2.Balance of wbs is not zero.
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
How to change above error message into warning message so that it will allow us to close the project.
With regards,
V.krishnamoorthy

Hi,
Thanks for your answer. But still i am receiving the same error
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
With regards,
V.krishnamoorthy

Standard warning messages in Vendor Request Form

Hi All,
Please let us know, how are the standard warning messages in Vendor Request Form while creation/search are displayed.
For example, I am getting an soft warning message text, at vendor creation which says "Some of the records were not found; for more information, check the log".
Here we don't have any log traces to be checked for, and we have verified the back end record resultset count which is same, irrelevant of the warning message being shown.
These messages are displayed only at two places:
1) The search navigation page, where all the searched record results are displayed and we continue further for creation of vendor workflow.
2) When the workflow of vendor creation is completed, along with the "Workflow has been completed" success message, this warning message is also shown.
I want to know, from where these messages are being populated and how to suppress these messages.
Kindly suggest.
Thanks in advance!
Message was edited by: Oxana Noa Zubarev

Hi All,
Attaching the screen shot for refernce:
After we click on "continue with create/edit" button, after few details have been entered, the work flow completes.
There are we are getting these error message as highlighted above.
Let me know if any info from my end would help in getting the root cause.
Thanks in advance.

I downloaded Firefox 4.0 onto my Mac but when I try to open it I get a warning message saying "The following disk images couldn't be opened" What do I do now?

While running Firefox, I got a prompt saying their was an update. I did that, but then got another message saying that it was recommended I update firefox to 4.0. I downloaded it, but never received a prompt to drag the image into my applications folder. I also never saw an image of firefox 4.0 on my desktop. Firefox 4.0 was in my downloads folder but got the above warning message when I clicked on it. I tried downloading it again, but the same thing happened. Now what? It appears that Firefox is still running, although I haven't yet tried to go to another website.

Try:
*http://thexlab.com/faqs/resetlaunchservices.html
* http://guides.macrumors.com/Repairing_Permissions

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport

Removing warning messages - PTMW

Hi,
I must to restrict the message apperance for transaction PTMW. In PTMW, when managers click on Goto -> Process Process Messages, they should see only the error messages. I tried to use badi PT_BLP_USER, but without success. Can you tell me how I can do this requirement ?
Thanks

The warning messages are fine and normal. (You may want to sellect a different build folder, looks lik eyou are building to where your apps are?)
Not sure about how you are trying to burn them (I use Toast or DVD SP itself), but in general make a new disc, then add the VIDEO_TS and AUDIO_TS folders

Warning messages repeated

Similar Messages

Maybe you are looking for