Warning msg. when trying to activate MP
guys,
I am trying to activate MP, and i am getting following Waring msg. ! what does it mean ? and how serious it it ?
"The InfoProvider properties for ZCIA_M05 are not the same as the system default
Message no. BRAIN376"
thanks
yes i did assign all the infoobject. i could activate it too, but before i could activate it, i got a warning msg.
still, i ignore those and activate it.
but i wasnt sure i serious it. Also i checked MP's properties and its all the same( like other MPs).
But, i thought let me get some information from Experts about that worning !!!
let me know if you have any idea about it.
Also, When i was trying to Activate MP again, it was asking like " its already active, do u still want to active" and if i say yes, it
gives me an error msg. " MP is not yet Locked"
Do i need to Lock it ????? what is that ??
thanks
Similar Messages
-
Warning msg when trying to upload to Flickr with new LR4.1 RC
Worked fine with previous versions, including LR4. Now with LR4.1 I get the following:
"Warning: Can't update this collection. An internal error has occurred: Invalid at the top level of the document."
Help! Answers?http://forums.adobe.com/thread/982766?tstart=0
-
Ho do we make msg. CK666 become warning msg when we do costing run?
Dear Experts,
The sys. activate transfer price for preserve use.
When we do costing run for profit center valuation, the following error msg ocurred.
CK666 Material 227BO0001/plant 1030: Transfer price could not be found.
Diagnosis
When switching profit center 0000008000->0000005000 (from the material component to the costing object), a transfer price could not be determined for transfer price variant 0 in respect of material 227BO0001 in plant 1030.
System Response
If you carry out costing for a profit center valuation, material 227BO0001 goes into the cost estimate without a value.
If you create a cost estimate for group valuation, profit from material 227BO0001 is not transferred into the cost component split.
Procedure
Check the settings for transfer price variant 0.
In OKEQ, the variant for TP is blank.
Ho do we make msg. CK666 become warning msg when we do costing run? and let costing result can be release, or there's another way?
Thanks in advance.There is alternative solution.
Try using TCode SE91.
Enter the class - CK and Enter the message number 666.
Select that line message line.
Go to Utilities, Click on "Where-Used-list" or press "CtrlShiftF3" from keyboard.
Select programs and deselect all others.
Identify your program and double click against that under short description.
There you can change the letter from "E" to "W" as your requirement.
NOTE: take assistance of ABAPer of this, Do enquire about the implication of the same in sandbox before doing anything on any other client.
Thanks & Regards
JP -
Error message when trying to activate caller ID fo...
Hello. I keep getting an error message when trying to activate my caller ID for my mobile number. It keeps saying "We were unable to send you a confirmation code at this time. Please try again later. " I have checked the list of countries excluded from caller ID and my country is not on it. Please can anyone help? thanks
TiaSame things has happend to me for 4 days.
I have no answer, but I'd sure like one.
-- Gerry -
My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!
Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?
-
Is there any reason why my apple id and password allow log in to App Store but say password invalid when trying to activate Facetime - I thought that Id and password were the same for all functions ?
try the steps in this article:
http://support.apple.com/kb/TS4268 -
I get an error message when trying to activate imessage please help
i get an error message when trying to activate imessage. i already restored my phone didn work tried turning it off still nothing
Did you try again?
What network are you using?
Are you using a supported carrier? -
hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!
That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results. -
when trying to activate iCloud on iPhone and iPad I get "account not verified... check your email." Can't verify account on either device.
Can't verify device on website either.Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you. -
Error when trying to activate Office 2013 ProPlus - (0x80070005)
Have been receiving this error message for 2 days when trying to activate Office 2013.
Please note that I do not have the option to run Office as Administrator.
ISV using VB.net and SQL Server ExpressHi,
The suggestion I would like to provide was to run Office as administrator. By "I do not have the option to run Office as Administrator", did you mean you couldn't see the option or something else?
To run an Office application as administrator, we need to find the application shortcut, right click on it, then click "Run as administrator".
For the error message you provided, I also suggest you run the System File Checker to run the sfc /scannow command to scan all protected system files and replace the incorrect versions with the correct Microsoft versions.
For a Windows 7 PC
1. Click Start > All Programs >
Accessories, and then right-click Command Prompt and choose
Run as administrator.
2. In the command prompt, type sfc /scannow and press Enter.
3. When the system scan is complete, try to install Office again.
For a Windows 8 PC
1. Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click
Search.)
2. Enter command prompt in the search box.
3. In the list of results, swipe down on or right-click Command Prompt, and then tap or click
Run as administrator.
4. In the Administrator: Command Prompt window, type sfc /scannow
press Enter.
5. When the system scan is complete, try to install Office again.
I hope the information is helpful.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Error when trying to activate new valuation area - AU158
Hi,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 08 differ by more than 1 year" (AU158).
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
When I check the settings in transaction OAAR what I see is: area 01 - 2010 and area 08 (newest) - 2008 fiscal year is assigned.
How can I close area 08? Will I need reopen the 01 area until 2008 fiscal year?
How can I create the new area with the same fiscal year closing?
TksYear end closing--AJAB
FY Change---AJRW
If you open FY 2008, then you can create new depreciation area through AFBN.
I guess this depreciation area doesn't generate any postings and this is only for reporting purpose. -
Error when trying to activate new valuation area.
Hello forum,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 10 differ by more than 1 year".
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
But when I check the settings in transaction OAAR what I see is that same fiscal year is assigned to all the areas.
I don´t understand why the system is showing me this error then...How can I ensure all areas to be in the same fiscal year.
Thanks in advanceHi,
Do you have other company codes which are using the same Chart of Depreciation? Please check these company codes and perform fiscal year change to them.
It seems that the problem is related to note 421549 : the system tries
to check the entries for field T093B-ABGJA for all the entries,not
only for the relevant company code. If there's a difference of more
than 1 fiscal year between the last closed fiscal year for the area
you are trying to create, and one of the entries in T093B, then,
error AU 158 arises."
Because according to the note 421549: the system tried to check the entries for field for ALL THE ENTRIES,not only for the relevant company code.
If there's a difference of more than 1 fiscal year between the last closed fiscal year for the area you are trying to create, and one of the entries in T093B, then, error AU 158 arises.
Regards Bernhard
Edited by: Bernhard Kirchner on Jul 19, 2010 1:22 PM -
Does anyone know what error message 6 means? No detailed explanation of 6 on this page. Got that msg when trying to update iPhone (4S) OS software.
http://support.apple.com/kb/ts3694#error6
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
im trying to download songs from itunes to my pc, and then download onto my kindle fire and it keeps on giving me a error msg when trying to download songs on itunes?
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities
rissaleui562 wrote:
it says" the ipod "klarissaipodtouch" could not be synced because the sync session failed to start -
When trying to activate my iPad 3, I consistently get a message that the activation server is unavailable, Please Try Again. Does anyone know how to help me?
It is not bricked... I think I finally found the way: http://www.imore.com/how-fix-activation-errors-iphone-after-installation-ios-7-b eta.
The above artical started to help.. but eventually I did the following:
1) put device into DFU mode
http://www.imore.com/tip-put-iphone-ipad-dfu-mode
2) when connecting ipad to itunes, itunes was aware of DFU mode. Just selected the update and itunes downloaded the correct new OS (iOS 7.0.2) and did it's thing.
Note: there was no need to download an older version of iOS. In fact, I was always rejected when attempting a downloaded ipsw. iTunes always said, "This device isn't eligible for the requested build".
Device Info: iPad 3 wifi. Software was iOS beta 7 (7 release 5 I think).
Maybe you are looking for
-
Creation of a PO with reference to a contract - change of company code
Hi experts, When a PO is made with reference to an existing contract, the company code is copied automatically from the contract into the PO. Do you have an idea if it's possible to modify this in the PO? So that we can choose another company code? T
-
Hey! I have restarted my computer during the night and this morning, when I opened firefox, the sites I visited before were not showing anymore in my url bar. I did not reset any history or anything. After visiting them too, they don't seem to save i
-
How to display employee lower hierarchy.
Hi all, I am trying to generate a report of manager's lower hierarchy, As to get all the employee who are working under particular manager. But, I want to get his under working employee's under working employee and so on.., I think we have to
-
i hav created a jpg file using java... i need to use that file to display it in a table cell in html... how can i do that...
-
Premiere freezes on import video
Premiere Pro refuse to start or freezes when I open a video. My native resolution is 1366*768, I tried on an external screen with higher res, same problem after a few minutes. [Moved from the generic Cloud forum to the specific Program forum... Mod]