Warning: No more firmware rollback? Or from 1.2 it's only forward?

Apple has said this in regards to restoring our iPods:
Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
I have tried using the old iPod updater and now get an error message that it is no longer supported! Perhaps you can get it to run if you don't have an Internet connection, or perhaps it's a registry change, but it no longer works on my computer! So it's only upward from here, apparently. One of the reasons I purchased a iPod was the simple belief that I could roll the firmware back.
They say there is 4 options, I see restore with the same firmware that is on my iPod, or try a newer version. That appears to be it. If you have the next version call it 1.3 you can't put 1.2 back on your iPod. If you have 1.2 there is no way now to go back to 1.0. iPod Updater 2006-6-28 no longer runs after the latest iTunes update.
DAH

your connection might be faulty try jiggling it or twisting it gently while in the headphone jack.
I stress gently since there are optical outputs in it that you don't want to scratch. if you want true surround get a receiver that supports sound through hdmi or Toslink optical Audio, the latter I know your imac supports.

Similar Messages

Warning! Using SuperDuper to clone from an HDD to an SSD might seriously da

WARNING! USING SUPERDUPER TO CLONE FROM AN HDD TO AN SSD MIGHT SERIOUSLY DAMAGE THE HEALTH OF YOUR SSD!
This is the new thread which I referred to when replying to:
http://discussions.apple.com/thread.jspa?threadID=2274972&start=0&tstart=0
I used SuperDuper to clone from a VelociRaptor 300GB HDD to an OCZ Agility EX SLC SSD, with disastrous results.
To save me the time of rewriting all the events please refer to the following emails and online submissions:
(Biltan-Wales - 21 Dec 2009 - 11.02 GMT):-
After reading several very favourable product reviews of the above SSD, I have just purchased one from Aria Technology Ltd., to use as a boot drive for my (early 2009) 8-Core 2.93GHz Intel Xeon Nehalem desktop workstation.
Also, prior to purchase of an OCZ SSD, I posted a question on Apple's Discussions' Forum:
http://discussions.apple.com/thread.jspa?threadID=2263023&tstart=0
From the response to this, and from reading several other threads regarding SSDs, I found that several Mac Pro owners are using OCZ SSDs as boot drives, and in some cases employing up to 3 of them.
I received my Agility EX from Aria on 16th. December, and yesterday afternoon I decided to set up my boot drive and 4 drive RAID 0, as described in: http://discussions.apple.com/thread.jspa?threadID=2263023&tstart=0
First of all I used SuperDuper to clone from my VelociRaptor 300GB drive in Bay 1, to my original Apple (WD) 640GB drive in Bay 2.
Then I removed the original Apple drive, and installed it in an ONNTO dataTale TQ-M12H external single enclosure, using a Firewire 800 interface connection. Next I selected this as my boot drive to check it would boot OK, restarted my system, and there was no problem.
So my next step was to install the Agility EX, and another 3 VelociRaptor 300GB drives, in the Mac pro workstation.
First, I reselected VelociRaptor 1 as my boot drive, so that I could use SuperDuper to clone to the Agility EX.
The Agility EX was installed in the lower of the 2 optical bays, and was connected to the pre-wired SATA and power cable, and the VelociRaptors were placed in hard drive bays 2, 3, and 4.
I then started up the Mac Pro, and there were 4 message boxes on the desktop, requesting that the drives should be initialised. So then I used Disk Utility to initialise the 4 drives. The SSD was named "Agility EX Boot", and the others "VelociRaptor 2", VelociRaptor 3, and VelociRaptor 4". The Mac system accepted all 4, and mounted desk top icons for each drive. I cannot remember the exact figure, but the Agility EX was listed as approx. 64GB in Disk Utility after its initialisation. All 4 VelociRaptors are shown as 300.07GB. All drives were formatted as Mac OS Extended (Journaled).
The next stage was to use SuperDuper to clone from VelociRaptor 1 to the Agility EX Boot drive.
Everything was fine until 28.00GB had been copied, and then nothing more would copy. The total to be cloned was just under 30GB, which should not have been a problem with a SSD disk capacity of approx. 64GB, but everything was frozen at that point - exactly 28.00GB!
Eventually, my only option was to stop the process, and quit Super Duper.
Then I restarted the system to try again, but this is where there is a real problem now!
My system does not recognise the Agility EX at all now! Also, it is no longer listed in Disk Utility!
The system does not even acknowledge its existence! It is not even shown on the desktop at start-up, whereas I thought that perhaps there might have been another message box requesting that it should be reinitialised.
I tried disconnecting and reconnecting everything - all drives, interface connections, power cables etc., but to no avail!
This morning I tried this again, but still I cannot get my system to even acknowledge the Agility EX, let alone list it!
So at the moment I am still using VelociRaptor 1 as my boot drive, and, in fact, as my main drive, because I am reluctant to use it with the 3 other VelociRaptors as a 4 drive RAID 0 set up until I get this problem with the Agility EX resolved.
(OCZ - 22 Dec 2009 - 18.29 GMT):-
Cloning from a HDD to an SSD is very problematic. I strongly recommend against doing this. Instead you will want to just install normally onto the SSD. You can clone from SSD to SSD, or from HDD to HDD, but going from one to the other can cause issues.
Try disconnecting the drive from the computer for an hour or so. This will allow all power in the drive to fully discharge. This is a way of resetting the drive that can usually recover the drive. Then plug the drive back in. Does the drive show up again?
If so, delete the partition on the drive, then create a new partition and then install the OS onto it clean rather than clone the OS onto the drive. That should resolve the issues you are having.
(Biltan-Wales - 23 Dec 2009 - 16.19 GMT):-
Thank you for your advice.
I have now disconnected the Agility EX SSD, and removed it from my Mac Pro's lower optical bay.
As Christmas is imminent, and I will not be using my system very much over the next few days, I will leave the drive for 4 to 5 days to allow ample time for all the power to discharge.
Then I will reconnect it, and I will let you know whether or not the drive is recognised by my system.
I was not aware that cloning from a HDD to an SSD could be problematic. Several threads on the Apple Support Discussion Forum have recommended using SuperDuper or Carbon Copy Cloner for this purpose. SuperDuper is the preferred option of most Forum members, whereas Lloyd Chambers (diglloyd.com), author of "macperformanceguide.com", uses Carbon Copy Cloner to clone his HDD boot drives to his Intel and Crucial SSDs.
After the Agility EX had been set up as my system boot drive, my intention was to use SuperDuper to clone from it to my original Apple (WD) HDD, now in an external enclosure with Firewire 800 interface, and then use SuperDuper's Smart Update for regular backups, so that I always had an up to date spare boot drive for the OS and applications.
The current VelociRaptor 1 boot drive would then be erased, and I would then use the Mac OS Disk Utility to create a 4 drive software RAID ) with the other 3 VelociRaptors, and this would be backed up using Time Machine to my existing WD My Book Studio Edition II 2TB External Hard Drive.
Please correct me if I have misunderstood your advice, but are you saying that I should only use another SSD, and not my original Apple (WD) HDD, as my back-up external boot drive? I don't know of any other Mac users who are using SSDs for that purpose, possibly because of the prohibitive cost of doing so.
I am more than happy to follow your advice to reinstall the Mac OS and my applications cleanly onto the Agility EX, and, in fact, I did exactly that with my first VelociRaptor HDD, before I had SuperDuper. However, that would still leave me with the problem of how to set up and maintain an external back-up system boot drive, without incurring the expense of another SSD. Any suggestions please?
Anyway the most important matter is the existing problem, and I am hoping that following your advice will resolve this.
I will contact you again early next week. In the meantime have a very enjoyable Christmas!
(OCZ - 24 Dec 2009 - 00.25 GMT):-
If the image is of an HDD and that image is then cloned onto an SSD that does tend to be problematic. I do not recommend doing this, as an image of the HDD somewhat regularly does fail to copy onto an SSD and still remain functional or fast.
You can store the image file on any sort of drive. Storing the image file is fine, as that is just a digital file, so the storage medium doesn't matter. Its actually applying that image to a drive is where the problems often occur.
You can image from a HDD to a HDD just fine, or an SSD to an SSD just fine, but going from one to the other is problematic enough that I recommend not doing this. Sometimes it works just fine, but other times it can fail catastrophically to the point of even bricking the drive. To error on the side of caution I recommend just going a clean install on the new SSD.
Once you have that clean install done you can then take an image of that SSD and image on to other SSD's, or store the image on a HDD for backup purposes.
(Biltan-Wales - 29 Dec 2009 - 13.16 GMT)
Thank you for your last email.
Further to your previous email, and my reply of 23/12/2009. this morning I reconnected the Agility EX SSD.
However, unfortunately, the drive has not showed up again on my system. There is no icon for it on the desktop, nor is it listed in Disk utility.
When I checked Serial-ATAS in my Mac Pro's System Profiler, all 6 Intel ICH10 AHCI are listed in the Serial-ATA Device Tree, but, whereas all my other drives are sub-listed, there is nothing underneath the ICH10 AHCI for the lower optical bay.
As the drive has had 6 days to discharge and reset, it would appear that it has not recovered.
Where do I go from here?
I am still awaiting a reply from OCZ, but that is not surprising, because of the different time zones and the Christmas?New Year holiday period.
In the meantime does anybody else have any ideas, please?

Hi thanon,
"So the SSD is not visible, not even in disk utility, even after a restart ?":-
No.
"Check the log of SuperDuper (Window-Show Log); warnings are in red, I think.":-
This is a copy of the log, but it only refers to the original Mac (WD) drive as the Target Volume and it only lists the last Smart Update. There is no record of the original cloning to the same drive on 21st. December, nor of the interim Smart Updates. There is no record logged at all for the OCZ Agility EX SSD, despite the unsuccessful cloning attempt on 21st. December:-
| 11:39:15 AM | Info | SuperDuper!, 2.6.2 (87), path: /Applications/SuperDuper!.app, Mac OS 10.6.2 build 10C540 (i386)
| 11:39:15 AM | Info | Started on Sun, Dec 27, 2009 at 11:39 AM
| 11:39:15 AM | Info | Source Volume: VelociRaptor 1, mount: /, device: /dev/disk3s2, media: WDC WD3000HLFS-01G6U1, interconnect: Internal SATA, file system: "Journaled HFS+", OS: 10.6.2 (10C540), capacity: 299.73 GB, used: 30.53 GB, directories: 164608, files: 521266, ejectable: NO, ACLs: Enabled
| 11:39:15 AM | Info | Target Volume: Untitled 1, mount: /Volumes/Untitled 1, device: /dev/disk5s2, media: Ext Hard Disk, interconnect: External FireWire, file system: "Journaled HFS+", OS: 10.6.2 (10C540), capacity: 639.79 GB, used: 30.27 GB, directories: 164519, files: 522654, ejectable: YES, ACLs: Enabled
| 11:39:15 AM | Info | Copy Mode : Smart Update
| 11:39:15 AM | Info | Copy Script : Backup - all files.dset
| 11:39:15 AM | Info | Transcript : BuildTranscript.plist
| 11:39:15 AM | Info | PHASE: 1. Prepare to Copy Files
| 11:39:15 AM | Info | ...ACTION: Preparing VelociRaptor 1
| 11:39:15 AM | Info | ......COMMAND => Verifying the integrity of volinfo.database
| 11:39:15 AM | Info | volinfo.database OK
| 11:39:15 AM | Info | ......COMMAND => Enabling permissions on VelociRaptor 1
| 11:39:15 AM | Info | Refreshing Disk Arbitration ...
| 11:39:15 AM | Info | ......COMMAND => Verifying that permissions are enabled for VelociRaptor 1
| 11:39:15 AM | Info | Permissions on '/' are enabled.
| 11:39:15 AM | Info | ...ACTION: Preparing Untitled 1
| 11:39:15 AM | Info | ......COMMAND => Enabling permissions on Untitled 1
| 11:39:15 AM | Info | Refreshing Disk Arbitration ...
| 11:39:16 AM | Info | ......COMMAND => Verifying that permissions are enabled for Untitled 1
| 11:39:16 AM | Info | Permissions on '/Volumes/Untitled 1' are enabled.
| 11:39:16 AM | Info | ......COMMAND => Verifying that Untitled 1 ACL support matches VelociRaptor 1
| 11:39:16 AM | Info | ...ACTION: Preserving Spotlight state on Untitled 1
| 11:39:16 AM | Info | ......COMMAND => Disabling Spotlight search indexing on Untitled 1
| 11:39:16 AM | Info | PHASE: 2. Copy Files
| 11:39:16 AM | Info | ...ACTION: Copying files from VelociRaptor 1 to Untitled 1 using Smart Update
| 11:39:16 AM | Info | ......COMMAND => Cloning VelociRaptor 1 to Untitled 1
| 11:39:16 AM | Info | Copying copy files with delete using script: /Users/williamtanner/Library/Application Support/SuperDuper!/Copy Scripts/Standard Scripts/Backup - all files.dset
| 11:39:16 AM | Info | Loading 27 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude system temporary files.dset
| 11:39:16 AM | Info | Loading 6 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude system cache files.dset
| 11:39:16 AM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude Norton FileSaver files.dset
| 11:39:16 AM | Info | Loading 2 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude Google Desktop Index files.dset
| 11:39:16 AM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude iTunes Temporary files.dset
| 11:39:16 AM | Info | Loading 0 commands from copy script /Users/williamtanner/Library/Application Support/SuperDuper!/Copy Scripts/Standard Scripts/Backup - all files.dset
| 11:39:20 AM | Info | /
| 11:39:20 AM | Info | /.vol
| 11:39:20 AM | Info | Ignoring /.vol
| 11:39:20 AM | Info | /cores
| 11:39:20 AM | Info | /Network
| 11:39:20 AM | Info | /.Spotlight-V100
| 11:39:20 AM | Info | Preserving /.Spotlight-V100
| 11:39:20 AM | Info | /private
| 11:39:20 AM | Info | Ignoring /private/var/folders/-S
| 11:39:20 AM | Info | Ignoring /private/var/folders/zz
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.epson.epw
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.apple.speech.synthesis.globals
| 11:39:20 AM | Info | Ignoring /private/var/tmp/launchd
| 11:39:20 AM | Info | Ignoring /private/var/tmp/com.WD.WDDriveManagerService
| 11:39:23 AM | Info | Ignoring /private/var/vm/swapfile0
| 11:39:23 AM | Info | Ignoring /private/var/run/vpncontrol.sock
| 11:39:23 AM | Info | Ignoring /private/var/run/usbmuxd
| 11:39:23 AM | Info | Ignoring /private/var/run/syslog.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/syslog
| 11:39:23 AM | Info | Ignoring /private/var/run/printtool
| 11:39:23 AM | Info | Ignoring /private/var/run/portmap.socket
| 11:39:23 AM | Info | Ignoring /private/var/run/mDNSResponder
| 11:39:23 AM | Info | Ignoring /private/var/run/cupsd
| 11:39:23 AM | Info | Ignoring /private/var/run/com.apple.ActivityMonitor.socket
| 11:39:23 AM | Info | Ignoring /private/var/run/asl_input
| 11:39:23 AM | Info | Ignoring /private/var/run/SCHelper
| 11:39:23 AM | Info | Ignoring /private/var/run/diskarbitrationd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/configd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/DirectoryService.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/.DSRunningSP1
| 11:39:23 AM | Info | Ignoring /private/var/run/automount.initialized
| 11:39:23 AM | Info | Ignoring /private/var/run/mds.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/com.apple.loginwindow.didRunThisBoot
| 11:39:23 AM | Info | Ignoring /private/var/run/pppconfd
| 11:39:23 AM | Info | Ignoring /private/var/run/resolv.conf
| 11:39:23 AM | Info | Ignoring /private/var/run/sntp.log
| 11:39:23 AM | Info | Ignoring /private/var/run/ntpd.pid
| 11:39:23 AM | Info | Ignoring /private/var/run/utmpx
| 11:39:23 AM | Info | Ignoring /private/var/run/mds
| 11:39:32 AM | Info | Ignoring /private/var/db/BootCache.playlist
| 11:39:32 AM | Info | Ignoring /private/var/db/volinfo.database
| 11:39:32 AM | Info | Ignoring /private/tmp/MobileDevice.log
| 11:39:32 AM | Info | Ignoring /private/tmp/launchd-99.KTlnYd
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-TIwnDn
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-S6asBo
| 11:39:32 AM | Info | Ignoring /private/tmp/launch-1v6MDi
| 11:39:32 AM | Info | Ignoring /private/tmp/icssuis501
| 11:39:32 AM | Info | Ignoring /private/tmp/4b3745a3d4d81
| 11:39:32 AM | Info | Ignoring /private/tmp/target221.indexState
| 11:39:32 AM | Info | /Users
| 11:39:36 AM | Info | Ignoring /.hotfiles.btree
| 11:39:36 AM | Info | /bin
| 11:39:36 AM | Info | /sbin
| 11:39:36 AM | Info | /usr
| 11:39:48 AM | Info | /System
| 11:41:47 AM | Info | /Library
| 11:42:41 AM | Info | /Applications
| 11:44:22 AM | Info | /.Trashes
| 11:44:22 AM | Info | /.fseventsd
| 11:44:22 AM | Info | Preserving /.fseventsd
| 11:44:22 AM | Info | /dev
| 11:44:22 AM | Info | /net
| 11:44:22 AM | Info | /home
| 11:44:22 AM | Info | /Volumes
| 11:44:22 AM | Info | Ignoring /Volumes/My Book
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 3
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 4
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 2
| 11:44:22 AM | Info | Ignoring /Volumes/VelociRaptor 1
| 11:44:22 AM | Info | Ignoring /Volumes/Untitled 1
| 11:44:22 AM | Info | Evaluated 685438 items occupying 29.45 GB (164606 directories, 511269 files, 9563 symlinks)
| 11:44:22 AM | Info | Copied 463 items totaling 0.69 GB (117 directories, 335 files, 11 symlinks)
| 11:44:22 AM | Info | Cloned 29.15 GB of data in 306 seconds at an effective transfer rate of 95.25 MB/s
| 11:44:22 AM | Info | ......COMMAND => Resetting Custom Icon bit on Untitled 1
| 11:44:22 AM | Info | PHASE: 3. After Successful Copy
| 11:44:22 AM | Info | ...ACTION: Making Untitled 1 bootable
| 11:44:22 AM | Info | ......COMMAND => Blessing OS X System Folder
| 11:44:23 AM | Info | Successfully blessed Mac OS X folder on Untitled 1
| 11:44:23 AM | Info | ......COMMAND => Blessing OS 9 System Folder
| 11:44:23 AM | Info | Did not bless Mac OS 9 System Folder on Untitled 1 because it does not exist.
| 11:44:23 AM | Info | ...ACTION: Updating prebinding on Untitled 1
| 11:44:23 AM | Info | ......COMMAND => Updating boot cache on '/Volumes/Untitled 1'
| 11:44:30 AM | Info | updatedyld_sharedcache[271] current i386 cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:34 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:34 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:38 AM | Info | updatedyld_sharedcache[271] current ppc cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:41 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:41 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:45 AM | Info | updatedyld_sharedcache[271] current x86_64 cache file invalid because /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv has changed
| 11:44:48 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
| 11:44:48 AM | Info | updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
| 11:44:52 AM | Info | Successfully updated boot cache on Untitled 1
| 11:44:52 AM | Info | ...ACTION: Restoring Spotlight state on Untitled 1
| 11:44:52 AM | Info | ......COMMAND => Restoring Spotlight search indexing state on Untitled 1
| 11:44:53 AM | Info | /Volumes/Untitled 1:
| 11:44:53 AM | Info | Indexing enabled.
| 11:44:53 AM | Info | Indexing enabled on Untitled 1
| 11:44:53 AM | Info | Copy complete.
"Maybe turn the MP off, pull the power cord and disconnect all external devices but keyboard and mouse, disconnct the SSD, reconnect and start MP":-
I have tried this several times without any success.
"Also, make sure no programs are running during cloning, and leave the computer alone.":-
SuperDuper was the only program running when I cloned firstly to the Mac (WD) HDD, and secondly to the Agility EX on 21st. December.
Also everything was disconnected before I removed and transferred the Mac HDD to an external enclosure.
After I had checked that the Mac HDD had been cloned successfully, everything was disconnected again before I fitted the Agility Ex and the other 3 VelociRaptors in the lower optical drive bay, and drive bays 2,3 & 4 respectively.
I used a Lindy anti-static Service Kit throughout the whole process. I purchased this originally for when I installed 16GB of Kingston RAM, an ATI Radeon HD4870, and my first VelociRaptor

Java.sql.SQLException: No more data to read from socket

Hello,
we're now facing some strange problem which is probably caused by some malfunctioned connections being present in connection pool. The MGP process is failing for some clients with following error message. During the MGP process, some users are processed without any problems and some encounter this exception. I tried to restart the DB and both OL servers (we have 2 OL servers, on one of them is running MGP), but it didn't help.
Some time before I restarted the servers, we were also occasionally facing "Server connections exceeded" error message, but I don't think this is relevant...
We're using 10gR2 OL servers and 10gR2 RDBMS.
Any ideas what could be wrong?
<pre>
Applied Record     Counts:
Insert Count     = 0
Update Count     = 0
Delete Count     = 0
Composed PubItems
(<PubItem Name>, <Duration     in Milli Seconds>):
JPOCZ_C$ALL_CLIENTS,16
JPOCZ_PA_STATESTOCKSUM,1484
JPOCZ_PA_MEMOS,31
JPOCZ_TASKMOTYPES,47
JPOCZ_PA_VISITDETAILS,16
JPOCZ_PA_STATESTOCK,859
JPOCZ_DISTRIBS,47
JPOCZ_ITEMPRICING,438
Compose Error:
java.sql.SQLException: No more data to read from socket
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:985)
     at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:746)
     at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:705)
     at oracle.jdbc.ttc7.Ocommoncall.receive(Ocommoncall.java:108)
     at oracle.jdbc.ttc7.TTC7Protocol.rollback(TTC7Protocol.java:427)
     at oracle.jdbc.driver.OracleConnection.rollback(OracleConnection.java:1410)
     at oracle.lite.sync.JupConnection.rollback(Unknown Source)
     at oracle.lite.sync.MGP$MGPG.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
</pre>

I'm not using localhost, but the host name. We just today notified some other network problems on this server and discovered there're 2 network cards - one of them which wasn't connected was configured for DHCP and the other one was configured properly with fixed IP address. We disabled the disconnected network card and it looks like the problems with other applications is solved so we'll se if the Mobile Server is also cured...

"No more data to read from socket" exception when testing connections

Hi,
I will appriciate your help with the following problem.
We have the follwoing errors in the weblogic.log (We are using weblogic 8.1.0.2 and Oracle 9.2.0.3)
####<Dec 20, 2006 10:47:49 AM EET> <Info> <JDBC> <ep> <mfserver> <Thread-14> <<WLS Kernel>> <> <BEA-001128> <Connection for pool "oraclePool" closed.>
####<Dec 20, 2006 10:47:49 AM EET> <Info> <JDBC> <ep > <mfserver> <Thread-14> <<WLS Kernel>> <> <BEA-001067> <Connection for pool "oraclePool" refreshed.>
####<Dec 20, 2006 10:47:51 AM EET> <Error> <JDBC> <ep > <mfserver> <Thread-14> <<WLS Kernel>> <> <BEA-001112> <Test "select count(*) from DUAL" set up for pool "oraclePool" failed with exception: "java.sql.SQLException: No more data to read from socket".>
####<Dec 20, 2006 10:47:51 AM EET> <Error> <JDBC> <ep > <mfserver> <Thread-14> <<WLS Kernel>> <> <BEA-001131> <Received an exception when closing a cached statement for the pool "oraclePool": java.sql.SQLException: Io exception: Broken pipe.>
These exception occures every hour after the connection pool is being closed and refreshed.
Also there are a lot of the follwoing warnning in the log :
<BEA-001074><A JDBC pool connection leak was detected.
Does these two problems connected? What can we do in order to solve it?
Thanks
Edited by RF123 at 01/28/2007 3:41 AM

R F wrote:
Hi,
I will appriciate your help with the following problem.
We have the follwoing errors in the weblogic.log (We are using weblogic 8.1.0.2 and Oracle 9.2.0.3)
####<Dec 20, 2006 10:47:49 AM EET> <Info> <JDBC> <ep> <mfserver> <Thread-14> <<WLS Kernel>
<> <BEA-001128> <Connection for pool "oraclePool" closed.>
####<Dec 20, 2006 10:47:49 AM EET> <Info> <JDBC> <ep > <mfserver> <Thread-14> <<WLS Kernel>
<> <BEA-001067> <Connection for pool "oraclePool" refreshed.>
####<Dec 20, 2006 10:47:51 AM EET> <Error> <JDBC> <ep > <mfserver> <Thread-14> <<WLS Kernel>
<> <BEA-001112> <Test "select count(*) from DUAL" set up for pool "oraclePool" failed with exception:
"java.sql.SQLException: No more data to read from socket".>
####<Dec 20, 2006 10:47:51 AM EET> <Error> <JDBC> <ep > <mfserver> <Thread-14> <<WLS Kernel>
<> <BEA-001131> <Received an exception when closing a cached statement for the pool "oraclePool":
java.sql.SQLException: Io exception: Broken pipe.>
These exception occures every hour after the connection pool is being closed and refreshed.
Also there are a lot of the follwoing warnning in the log :
<BEA-001074><A JDBC pool connection leak was detected.
Does these two problems connected? What can we do in order to solve it?Hi. The problems are not directly related, but may have the same cause.
Something is killing your DBMS connections out from under the driver.
Do you have a firewall between WLS and the DBMS, or a flakey network?
Contact BEA support to get the 8.1sp2 patch for getting meaningful
connection leak traces (CR209251_81sp2.jar). When that patch is installed
the leak messages should show a full stack trace of the application code
where the connection was obtained. It is that application code that
somehow failed to close the pool connection, causing a pool leak. I
suspect that the application code got an unexpected exception, such as
when/if the DBMS/network/firewall killed a connection. In this case I
believe the application went through an exception-handling path that
forgot to close the connection.
Joe

SQL error 17410 No more data to read from socket

Hi, I may have reached some stability limit of my JDBC thin driver, DB version and
the complexity of my use cases??
DB= 9.0.1.0
Jev/OC4J = 9.0.2
So this includes the JDBC thin driver included that looks like version; 9.0.2.7.99
It made no sense but changing a dynamic where clause being set onto a View over an Entity
like; vo.setWhereClause("myid = "+theID+" and someFk ="+theFkId);
To a dynamic where clause with bind params for efficiency:
vo.setWhereClause("myid = :1 and someFk = :2");
vo.setWhereClauseParam(0, theId);
vo.setWhereClauseParam(1, theFkId);
I checked that my bind variables are same data type as what's declared in the Entity.
This intermitantly causes:
JBO-26066, which is a wrapper over SQLException 17410 No more data from socket
Deep into the stack trace are unmarshalUB1(MARengine.java) ...
leading me to believe this isn't my code but a bug/stress issue with the driver.
Any thoughts?
curt

Steve et al,
I'd like to re-ask does it make sense what I've done?
A standard VO over an Entity with no where clause.
vo.setWhereClause ("myId = :1 and myTypeCd = :2");
vo.setWhereClauseParam(0, "123")
vo.setWhereClauseParam(1, new Integer("1"));
If this makes sense and should work, then I'd like to debug why for me it throws this No more data to
read from socket error..
Nothing obvious turns up in the BugDB for this related to bind variables and JDBC based on what you've described so far. An unscientific test would be to download the latest 9.2 JDBC driver and try that to see if the problem persists.I downloaded the latest 9.2 -g debug drivers and got this interesting trace:
DRVR OPER OracleConnection.getDefaultFixedString() returning false
DRVR OPER ResultSetUtil.needIdentifier(typeCode=1): return: false
DRVR SQLS Input SQL: "SELECT JotfObligationsSum.UNO#, JotfObligationsSum.OBLIGATION_BALANCE, JotfObligationsSum.OBLIGATION_TYPE_CD, JotfObligationsSum.ENTERED_DT, JotfObligationsSum.RECORD_VERSION, JotfObligationsSum.ENTERED_BY, JotfObligationsSum.ROWID FROM JOTF_OBLIGATIONS_SUM JotfObligationsSum WHERE (JotfObligationsSum.Uno# = '1000270' and JotfObligationsSum.Obligation_Type_Cd=1)"
pStmt = conn.prepareStatement("SELECT JotfObligationsSum.UNO#, JotfObligationsSum.OBLIGATION_BALANCE, JotfObligationsSum.OBLIGATION_TYPE_CD, JotfObligationsSum.ENTERED_DT, JotfObligationsSum.RECORD_VERSION, JotfObligationsSum.ENTERED_BY, JotfObligationsSum.ROWID FROM JOTF_OBLIGATIONS_SUM JotfObligationsSum WHERE (JotfObligationsSum.Uno# = '1000270' and JotfObligationsSum.Obligation_Type_Cd=1)"); // JBO-JDBC-INTERACT
[803] (30) DRVR OPER OracleStatement.setFetchSize(rows=1)
Binding param 1: 1000270
[804] (0) DRVR OPER OraclePreparedStatement.setObject(paramIndex=1, object)
DRVR OPER OraclePreparedStatement.setObject(paramIndex=1, object, targetSqlType=12, scale=0)
DRVR OPER OraclePreparedStatement.setString(paramIndex=1, x=1000270)
Binding param 2: 1
[805] (0) DRVR OPER OraclePreparedStatement.setObject(paramIndex=2, object)
DRVR OPER OraclePreparedStatement.setObject(paramIndex=2, object, targetSqlType=4, scale=0)
DRVR OPER OraclePreparedStatement.setInt(paramIndex=2, x=1)
DRVR WARN DBError.findMessage(errNum, obj): returned No max length specified in defineColumnType
SQLWarning: reason(Warning: No max length specified in defineColumnType) SQLstate(null) vendor code(17108)
DRVR OPER OraclePreparedStatement.executeQuery()
DRVR OPER OraclePreparedStatement.executeUpdate()
DRVR OPER OracleConnection.getAutoCommit() returned false
DRVR WARN DBError.findMessage(errNum, obj): returned No more data to read from socket
SQLException: SQLState(null) vendor code(17410)
java.sql.SQLException: No more data to read from socketNotice that the first Select DRVR log shows the bind params already substituted?
what's the issue of no defined max length? That column is a Number(5) and the bind param is being
set from an Integer.
For the duplicate class issue, try searching the *.jpr file to see if somehow you have duplicate entries in there for the class it's complaining about. LOL, this is a good one. The first line in generated *Impl.java files is the package declaration. If
you bring up a java file and accidentally remove the first line, you'll get this odd error message.
Duplicate class found for abc.class
Thanks, curt

AEpress Completely Stuck Due to Firmware Rollback

Right off the bat, the symptoms I am having is an Airport Express (wireless-N) that is completely stuck in one state. I can't change any settings on it. When I try to access the Airport Express from the Airport Utility, I get error -6722 ("An error occurred while trying to access the apple wireless device"). It happens on wireless, and directly connected with Ethernet. It happens on windows, and on macs, and across all Airport utilities staring with 5.3.1. When I try to perform a hard reset (Hold down reset button while plugging in, leaving it plugged in, waiting for the rapid amber light and then letting go), the Airport Express restarts, but then comes back to its previously configured state.
In brief:
I can't log in to the manual setup to change any settings
Hard resetting appears to work, but then on restart all settings are retained.
The airport works as configured before it was put in this state.
I was troubleshooting some network issues (which turned out to be completely unrelated) when I tried reverting the APExpress back to firmware 7.3 from 7.5.2. After this completed, I lost my ability to configure the device, hard reset it, or re-update the firmware.
So as a warning to you all, do not revert back to 7.3 from 7.5.2 or else you may find your self in the situation I am in. It still works as I had it configured before the revert, but I cant update it in any way. Totally frustrating!

Aaaaaaand as I was writing that, I managed to fix it. Not sure how exactly. The variables that were used that worked:
On windows, running AU 5.5.2, right clicking upload firmware in the device list, choosing other, selecting a random firmware other than 7.3 (I think i ended up using 7.4.2) and clicking upload. Instead of trying to communicate with the APExpress, it directly uploaded the firmware and then it restarted, I got a crazy amber blink cycle I have never seen before (Three fast long blinks, and the three short fast blinks, repeat). Then it restarted and it was back to normal. Woohoo! There goes 5 hours of my life.

HT203128 iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.

iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...

You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on.

No more data to read from socket UTF instance problem

I'm using oracle jdbc thin driver and SunOne Application Server 7 environment.
I'm trying to call the stored procedure which has one IN parameter that is of type CLOB.
My code looks like this:
conn = DriverManager.getConnection (url, username, password);
conn.setAutoCommit(false);
clob = CLOB.createTemporary(conn, true, CLOB.DURATION_SESSION);
Writer wr = clob.getCharacterOutputStream();
wr.write(m_data);
wr.flush();
wr.close();
     PreparedStatement pstmt = conn.prepareCall(procedureCall);
pstmt.setClob(1, clob);
     pstmt.execute();
but when I run it, it throws this (at wr.write(m_data) statement):
[29/Jan/2003:15:07:25] WARNING ( 9340): CORE3283: stderr: java.io.IOException: No more data to read from socket
[29/Jan/2003:15:07:25] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.dbaccess.DBError.SQLToIOException(DBError.java:716)
[29/Jan/2003:15:07:25] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.driver.OracleClobWriter.flushBuffer(OracleClobWriter.java:270)
[29/Jan/2003:15:07:25] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.driver.OracleClobWriter.write(OracleClobWriter.java:172)
[29/Jan/2003:15:07:25] WARNING ( 9340): CORE3283: stderr: at java.io.Writer.write(Writer.java:150)
[29/Jan/2003:15:07:25] WARNING ( 9340): CORE3283: stderr: at java.io.Writer.write(Writer.java:126)
I tried using this instead of Writer:
clob.putString(1, m_data);
but the same error occurs.
I then tried to do both of these:
InputStream reader = new StringBufferInputStream(m_data);
PreparedStatement pstmt = conn.prepareCall(procedureCall);
pstmt.setUnicodeStream(1, reader, reader.available());
Reader reader = new StringReader(m_data);
     PreparedStatement pstmt = conn.prepareCall(procedureCall);
pstmt.setCharacterStream(1, reader, m_data.length());
but in both cases I got this (at pstmt.setCharacterStream() or pstmt.setUnicodeStream()):
[29/Jan/2003:16:06:00] WARNING ( 9340): CORE3283: stderr: java.sql.SQLException: Data size bigger than max size for this type: 76716
[29/Jan/2003:16:06:00] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
[29/Jan/2003:16:06:00] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
[29/Jan/2003:16:06:00] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.ttc7.TTCItem.setArrayData(TTCItem.java:95)
[29/Jan/2003:16:06:00] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.dbaccess.DBDataSetImpl.setBytesBindItem(DBDataSetImpl.java:2414)
[29/Jan/2003:16:06:00] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.driver.OraclePreparedStatement.setItem(OraclePreparedStatement.java:1134)
[29/Jan/2003:16:06:00] WARNING ( 9340): CORE3283: stderr: at oracle.jdbc.driver.OraclePreparedStatement.setUnicodeStream(OraclePreparedStatement.java:2633)
But, the greatest mistery of all is that code with temporary CLOB works fine when I create instance and use default settings. Problem occurs when I create instance with UTF coding scheme. But we are forced to use Unicode coding scheme, because of local special characters.
We are using Oracle 9i on Solaris UNIX platform and jdbc drivers supplied with it.
The CLOB I am trying to pass is a XML file and it is possible to be up to 400 KB in size.
Please help. I'm at my wit's end!

Hi,
I have a similar problem . This is the code that I used. Can u please help me
oracle.sql.CLOB newClob = oracle.sql.CLOB.createTemporary(((org.apache.commons.dbcp.PoolableConnection) con).getDelegate() , true, oracle.sql.CLOB.DURATION_SESSION);
          newClob.open(oracle.sql.CLOB.MODE_READWRITE);
          Writer wr = newClob.getCharacterOutputStream();
          wr.write(valuesXml);
          wr.flush();
          wr.close();
          //newClob.putString(1,valuesXml);
          pst.setClob(1,newClob);
These are the versions that I use
java version is 1.4.2_06
and it is a Liunx OS - gij (GNU libgcj) version 3.2.3 20030502 (Red Hat Linux 3.2.3-49)
the Oracle version is 9.2.0.4.0
The exception I see is
java.io.IOException: No more data to read from socket
     at oracle.jdbc.dbaccess.DBError.SQLToIOException(DBError.java:716)
     at oracle.jdbc.driver.OracleClobWriter.flushBuffer(OracleClobWriter.java:270)
     at oracle.jdbc.driver.OracleClobWriter.flush(OracleClobWriter.java:204)

How to restrict more than one delivery from one sales order.

Hi Guys,
We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
We want only one delivery for one sales order and rest of line items should be treated as rejected.
Kindly help
Thanks in advance,
Balu

Hi MP,
Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
Thanks,
Balu.
Edited by: Balu Sajja on Aug 30, 2010 1:29 PM

How can I select more than one song from the search results?

I want to create playlists based on certain words in the song title. For example, I may want to create a playlist of all my songs with LOVE in the title.
Doing the search is easy, but I can't select more than one song at a time. Is there any way in iTunes 12 for Windows to do this? I found an answer in iTunes for Mac, and it basically says to "un-check "Search Entire Library." " but I don't see that option in iTunes for Windows.
Here is the link to that question: how can i select more than one song from drop down search bar
I hope some Windows user can help me out.

Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

How can i transfer more than one file from server to client

Hi,
our requirement is transfer more than one files from server to client using the
webutil_file_transfer.as_to_client_with_progress.One file transfer is already working in our system.If anybody know the solution please inform
regards
mat

just an idea ...
for this purpose let us put aside security concerns and other potential problems....
-- Get the content of a server directory with Filter and create zip file
1) create a class that implements java.io.FilenameFilter ...
2) define accept() method ...
3) call File.list() with the filter as a parameter. The returned array of strings will have all the names that passed through the accept() filter
4) use java.util.Zip to create ZIP file on the server side
-- I think it is better to create this functionality as a separate Java class, put it in required folder and after it
-- use Forms->Program->"Import Java class" to create pl/sql wrappers, than to create wrappers for all classes and code in pl/sql
5) use webutil to transfer file on the client
6) use Java on client side to unzip transferred file
if you think this is not too complicated, you should try ...
Regards,
Vladimir

Since downloading the iOS on my iPad, I cannot download more than one pdf from mail to iBooks. I have to shut down y iPad and start again. Any suggestions?

Since downloading iOS on my new iPad, I cannot downlaod more than one pdf from mail into iBooks. I have to shut down my iPad and restart it to save a second pdf. Wasn't a problem with the old operating system. Any suggestions?

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

How to email more than one photo from camera roll

How do e-mail more than one photo from the camera roll at a time?

Go to the camera roll, open the thumbnails, click on the arrow in the top right, select up to 5 photos, click on share in the top left and select email.

Can I change more than one photo from color to black and white at one time?

can I change more than one photo from color to black and white at one time?

Check out iPhoto Batch Enhancer
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD

Can I manage more than one iTouch from one PC?

A family member has an iTouch managed with iTunes on PC. Another family member would like an iTouch but does not have a computer.
Can one manage more than one iTouch from one PC? How? Does one install separate instances of iTunes somehow on the PC for each device?
There is also the desire to have separate Apple Store accounts for each device. We don't what synced devices.

*How to use multiple iPods with one computer*
The Apple support document How to use multiple iPods with one computer suggests a number of ways. I use method two (Sync with selected playlists) with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
e.g.
"Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
"Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
etc.
I currently manage our family's five iPods using this system, each getting a different selection to suit their tastes and the capacity of their iPod. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
tt2

Warning: No more firmware rollback? Or from 1.2 it's only forward?

Similar Messages

Maybe you are looking for