Warning: No read access to field XYZ

Hello Experts.
How can I eliminate such a warning message ?
No read access to field XYZ
Regards
sas

hi
good
you have not mentioned where exactly you r getting this error,if you r getting as a message end of the screen than yo u have to debug the report and see where it is actually giving the message or wheather they have create da test it,
thanks
mrutyun^

Similar Messages

No read access to field string MKPF in SLIN

Hi Friends,
while checking my program through extended program check it is giving warning message as "No read access to field string MKPF" in the TABLES statement. How to correct this?

Hi
The system is just only giving warning as if said to you:
- Hey Abaper! You have declared to use the headerline of MKPF, but perhaps you aren't using it. Check your code and if you don't use you delete that declaretion.
So if you don't use MKPF in your program, you can delete the declaretion, if you use it you can do nothing or you put the string "#EC NEEDED at the end of declaretion. If you do it, while checking program through extend program check, the system skips that message and doesn't show you.
We often use header line of dictionary table only to do an existence query, in this case the system can give that warning message.
For example:
TABLES: BKPF.
SELECT SINGLE * FROM BKPF WHERE BUKRS = P_BUKRS
                            AND BELNR = P_BELNR
                            AND GJAHR = P_GJAHR.
IF SY-SUBRC = 0.
WRITE: 'Hello'.
ENDIF.
So I made a query on bkpf, but after I haven't read or used its headerline, so the system give me that message.
If I write:
SELECT SINGLE BUKRS FROM BKPF INTO P_BUKRS
                          WHERE BUKRS = P_BUKRS
                            AND BELNR = P_BELNR
                            AND GJAHR = P_GJAHR.
IF SY-SUBRC = 0.
WRITE: 'Hello'.
ENDIF.
I've done the same thing but now I haven't declared to use the headerline BKPF and so the system won't give me that warning message.
Max
Message was edited by: max bianchi
Message was edited by: max bianchi

No read access to field string

TYPES: BEGIN OF addr,
        adrnr TYPE adrc-addrnumber,
        END OF addr.
        i_addr               TYPE TABLE OF addr,
        wa_i_addr               TYPE addr,
After executing extended program check I get the following. What does it mean and how do I fix this.
<b>No read access to field string WA_I_ADDR
(The message can be hidden with "#EC NEEDED)</b>

Hi,
Please try this.
TYPES: BEGIN OF addr,
         adrnr TYPE adrc-addrnumber,
       END OF addr.
DATA: i_addr    TYPE addr,
       wa_i_addr TYPE addr.
Regards,
Ferry Lianto

No read access to field L_C_ATINN

Hi
I have the following error
No read access to field L_C_ATINN
for the code
data: l_c_atinn TYPE cabn-atinn.
in SLIN check please advice how to avoid this

Kittu,
We can use comment #EC NEEDED to make the message ignore as the variable is used.
Declare as below.
data: l_c_atinn TYPE cabn-atinn. "#EC NEEDED
Kind Regards
Eswar

No read access

I declared
Data: V_USRID TYPE SYSID.B
But in extended program check it is showing that
No read access to field V_USRID.
Every time i am hiddening this type of message, is there any solution for this. please guide me

Hi,
This is because the variable to get the name of SAP R/3 is declared and assigned the value sy-sysid, but no where the variable is assigned to other variable..
Since it is used for only assignment, in the extended program check it shows as no read access.
To avoid this you can avoid declaring the variable if it is not used anywhere in your code, else comment the code as given in extended check.

Giving Read access to key fields explicitly

Hi sap gurus,
How to give read access to key fields explicitly

Hi and thanks for the response.
The user has 2 security groups.
The first allows them "All" access to their entity, default and the RD security class for R&D accounts.
This group means they have read/write access to all accounts, which for their own entity is acceptable.
If in the second group I give them read access to all entities then they can read all accounts for all entities.
I need to stop them from seeing all accounts except the RD accounts for the other entities.
Is this possible?

Please solve the code inpsector error: Sequential read access possible

Hi,
i am getting code inspector warning message . could u please try to provide the solution for that warning message.
code inspector warning message is : Sequential read access possible for a hashed table
My statment : read table <lt_product_mbr> with table key (ujr0_c_member_id) = <l_product> assigning <ls_product_mbr>.
i declared <LT_PRODUCT_MBR> TYPE ANY TABLE.
Eventough i delared it as a type hashed or sorted . it is giving same warning message.
Regards
Koti

Hi Koti,
you specified the key field dynamically (variable in brackets). That means
it can not be checked statically whether the table key of the hashed table
is used or not since this is only clear at run time.
If you use the dynamic key specification
read table <lt_product_mbr> with table key (ujr0_c_member_id) = <l_product> assigning <ls_product_mbr>.
and not the direct key:
read table <lt_product_mbr> with table key field = <l_product> assigning <ls_product_mbr>.
the CI will warn you that you may end up with a sequential red (if not the table key of the hashed table
is used in the variable at run time.
Kind regards,
Hermann

Units field XYZ for field ABC of DataSource ZRST Message no. R8147

HI,
When I'm trying to SAVE my datasource ZRST, I've got following error.
Units field XYZ for field ABC of DataSource ZRST Message no. R8147
In extraction structure of this datasource thare are at least two fields that use the same unit field.
Accordign SAP note no 867795:
One of the fields is displayed and another is hidden.
Then the unit field is hidden and the above error occurs.
This note is valid for component SAP_ABA release 700. I'm running my R/3 source system on SAP_ABA 620.
Could it be the same case as described in this SAP note?
Anybody got same problem? Please advise.
Thanks
m./

Hi,
Please check the dependencies on the fields, as some fields should have the units defined ,check the fields and activate the datasource.
hope this helps,
thanks,
vrrp.

Access to fields of a form through IAC

Hello everyone!
I created with Adobe LiveCycle Designer ES2 (included with Adobe Acrobat X Pro) an example form with several fields.
After that I wanted to access the fields through the Acrobat SDK's Interapplication Communication (IAC) capability by using OLE.
As programming language I choose C# from the .NET framework. But the only field that I could access was the signature field and only when it was signed. I could not figure out the mistake. Is my code wrong? Or is the created form wrong? Can somebody help?
The code that I used:
Acrobat.AcroApp app = null;
Acrobat.AcroAVDoc avdoc;
AFORMAUTLib.AFormApp formApp;
AFORMAUTLib.IFields fields;
app = new Acrobat.AcroApp();
avdoc = new Acrobat.AcroAVDocClass();avdoc.Open(@"Form.pdf", null);
formApp = new AFORMAUTLib.AFormApp();
fields = formApp.Fields;
int fieldsCount = fields.Count;
foreach (var item in fields)
AFORMAUTLib.IField field = (AFORMAUTLib.IField)item;
result = field.Name + " = " + field.Value + "[" + field.Type + "]";

Yes, if the form is Reader Enabled, then a Reader user can add a graphic as the icon of a button via scripting to an AcroForm.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 27 Sep 2011 00:31:26 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Access to fields of a form through IAC
Re: Access to fields of a form through IAC
created by gatch<http://forums.adobe.com/people/_gatch_> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3939773#3939773

Possible Sequential Read Access for a Sorted Table

Hi All,
I have the following warnings in Code inspector check.
'Possible Sequential Read Access for a Sorted Table'
Kindly provide me the solution to overcome this warning message.
This is my code in BAdi : CRM_ORDER_FIELDCHECK , Method : FIELDCHECK
I am getting the above warning at
READ TABLE lt_status INTO ls_status WITH KEY status = 'E0001'
                                               user_stat_proc = 'ZITRHDQT'
                                               object_type = 'BUS2000114'.
and at
    MODIFY ct_input_field_names FROM ls_input_field_names
                                TRANSPORTING changeable
                                WHERE fieldname NE lv_field.
Please see the below code .
DATA : lt_header_guid TYPE crmt_object_guid_tab,
         lt_item_guid TYPE crmt_object_guid_tab,
         lt_order_i     TYPE crmt_orderadm_i_wrkt,
         ls_order_i     LIKE LINE OF lt_order_i,
         lt_status      TYPE crmt_status_wrkt,
         ls_status      LIKE LINE OF lt_status,
         ls_input_field_names TYPE crmt_input_field_names.
DATA : lv_header_guid TYPE crmt_fieldcheck_com-guid,
         lv_chng_no   TYPE c VALUE 'A',
         lv_field(10) TYPE c VALUE 'ACT_STATUS'.
DATA: lv_status_completed     TYPE crmt_boolean.
To Get GUID
IF is_fieldcheck_com-guid IS NOT INITIAL.
    lv_header_guid = is_fieldcheck_com-guid.
ELSE.
    lv_header_guid = is_fieldcheck_com-ref_guid.
ENDIF.
IF is_fieldcheck_com-ref_kind EQ 'A'.
    INSERT lv_header_guid INTO TABLE lt_header_guid.
    ELSE.
      SELECT SINGLE header FROM crmd_orderadm_i INTO lv_header_guid
                            WHERE guid = is_fieldcheck_com-ref_guid.
      INSERT lv_header_guid INTO TABLE lt_header_guid.
ENDIF.
*To Get the required details
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid       = lt_header_guid
    IMPORTING
      et_status            = lt_status
    EXCEPTIONS
      document_not_found   = 1
      error_occurred       = 2
      document_locked      = 3
      no_change_authority = 4
      no_display_authority = 5
      no_change_allowed    = 6
      OTHERS               = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_status INTO ls_status WITH KEY status = 'E0001'
                                               user_stat_proc = 'ZITRHDQT'
                                               object_type = 'BUS2000114'.
IF sy-subrc = 0.
    ls_input_field_names-changeable = lv_chng_no.
    MODIFY ct_input_field_names FROM ls_input_field_names
                                TRANSPORTING changeable
                                WHERE fieldname NE lv_field.
ENDIF.
ENDMETHOD.
Regards
Venkat

Hello Blake,
Try this:
READ TABLE lt_action_fld WITH KEY STATUS = '0' BINARY SEARCH.
wf_index = sy-tabix.
loop at lt_action_fld from wf_index.
if lt_action_fld-status ne '0'.
exit.
endif.
delete lt_action_fld index wf_index.
endloop.
Let us know, if this helps.
Rgds,
Raghu.

Is there an "Access Level" field on the "Send for Shared Review" screen (Pro X)?

I'm using Pro X, but haven't come across the "Access Level" field expalined in this on-line video http://tv.adobe.com/watch/learn-acrobat-x/getting-started-the-basics-of-reviewing/
Is this something you can enable?

It's only available if you select Acrobat.com as the review server.

What is Read Access Logging and how does it work!

Dear all,
I was following a doument :http://scn.sap.com/docs/DOC-50184
Which shows how you can display list modification structure in a view! But in standard if you check (i.e Listmodification for Business partner in opportunity).
Address , Phone and Email gets pick up automatically as soons as you sellect Partner ID! As per my knowledge that is achieved by :
Read Access Logging
if you check the properties of Data model field , there is an option of Read Access logging
If you check the Read Field Group Data collection , you will see below screen.
This Functionality , I have to achieve in my CUSTOM list modification structure! but How to create field group and how to achieve this functionality ihave no clue!:(
Please help!
Regards,
Dhruvin

Hello Dhruvin,
Then you need some DataOperations in the event handler which starts the ListModification.
Place them before the Start operation
They should assign the PartyID related attributes (one by one) to the resp. fields in the ListModificationStructure.
See example below:
HTH,
Horst

Can we add users to the 'Manage Access Request' field to process site access request in SharePoint Online?

Hi,
I have a requirement in which I have to assign couple of email ids to the "Manage Access Request" field to process site access requests. And, this is possible using server object model but I have to achieve this on SharePoint Online with the help
of CSOM.
There are two properties which control the access request configuration, first is "RequestAccessEnabled", a Boolean flag which turns on or off the access request feature for the site. The second property defines one or more email addresses where
requests will be sent to. It is named "RequestAccessEmail".
The above both properties are available for server object model but not for CSOM.
So, is there any other workaround or way to achieve the sane in CSOM?
Thanks,

I don't think there is a programmatic workaround for SharePoint Online. But the email address is just used for Notification. Anyone with Manage Permissions can approve Access Requests. If you create an email distribution list for the multiple
addresses that should be notified you should be able to add the email address for the distribution list into the Access request email field using the user interface.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Is It possible to access checksum field of LIN frame?

Hi All,
I am using LabVIEW 8.2 and PCI 3072 LIN card (GÖPEL electronic GmbH) .
Is it possible to access checksum field of LIN frame? I have to test one LIN driver - LIN conformance test. So I need to access timing of each byte, value of checksum, sync field etc. Anybody please reply
Regards
Preejesh M R

Hi,
You should have found some examples along with the Drivers provided in the CD which comes along with the card. If not, you can contact Goepel and they can provide them. Which driver APIs are you using for this device? Is there a function for checksum in the API, if not you can create a logic to read the string and convert it to a number and add all the bits together. My first suggestion, however is to contact Goepel.
Thanks,
National Instruments
Applications Engineer

How to access dynamic fields in a field symbol

hi
how do i access the dynamic fields created in side a field-symbol....
wht i mean is i have a table, whose workarea i assign to field symbol. but this table is runtime, altough i have debugged and found the values in this table, I want to accees the field symbol in a generic way.
say the table has 3 fields now fld1 fld2 and fld3 so i want to access the field symbol <fs> as <fs>-(name) where name can be anything fld1 or fld2 whichever i assign....
thanks. Let me know if you have any further questions.

Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to a field symbol before you can address it in a program.
Field symbols are similar to de-referenced pointers in the C programming language (that is, pointers to which the content operator * is applied). In ABAP, data references represent a real equivalent to pointers in the sense of variables that contain a memory address and can be used without the contents operator.
All operations programmed with field symbols are applied to the field assigned to it. A MOVE statement between two field symbols, for example, assigns the contents of the field assigned to another source field symbol to the field assigned to the target field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before the MOVEstatement.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks during the field assignment whether the assigned field matches the type of field symbol.
Field symbols provide greater flexibility when you address data objects:
·        You can assign one field symbol to another, which allows you to address subfields.
·        Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
·        You can also force a field symbol to take different technical properties than those of the field assigned to it (casting).
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. The MOVE statement (with your own auxiliary variables, if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
To declare a field symbol, use the statement
FIELD-SYMBOLS .
For field symbols, the angle brackets are part of the syntax. They identify field symbols in the program code.
If you do not specify any additions, the field symbol.
in a static ASSIGN and:
ASSIGN (dobj) TO from the second loop pass onwards.

Warning: No read access to field XYZ

Similar Messages

Maybe you are looking for