Warning on first startup of FCE 4.0

I have a question about FCE 4 that I just got 2 days ago. When I first started it up, I got a warning that FCE may not operate as advertised because my video card was not up to snuff and may not run Quartz Extreme(I'm paraphrasing).
I have a PM G4 1.25 GHz DP with a stock ATI Radeon 9000 Pro with 64MB of DDR SDRAM video card. It is installed in an AGP 4X graphics slot. The original specs advertise "Mac OS X with Quartz Extreme".
The System Requirements for FCE 4 are:
"*An AGP or PCI Express graphics card compatible with Quartz Extreme;* or an Intel GMA integrated graphics processor in a MacBook or Mac mini computer.
I am not doing any HD stuff (yet), just DV, and haven't seen anything unusual since installing. Rendering is a bit faster.
What, if anything, should I be aware of that I am not?

Did this operating system comes with this PC (OEM)?
Did you also having issue with Windows Genuine?
If yes, maybe graphic card manufactured caused this issue. I suggest contact HP to guide you to troubleshot Hardware issue. Based on my experience, OEM OS will have abnormal behavior since there is replacement CPU, graphic card, memory ect. HP build and
test this PC based on their own specification, check the HW upgrade suggestion at HP site. try to update the driver like CPU and BIOS
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02837360&tmp_task=prodinfoCategory&cc=us&dlc=en&lc=en&product=5115727

Similar Messages

Libvirtd crashing on first startup

Hello,
my libvirtd seems to crash, but only on the first startup:
root@horus /home/florian # modprobe kvm
root@horus /home/florian # modprobe kvm-amd
root@horus /home/florian # /etc/rc.d/libvirtd start
:: Starting libvirtd [DONE]
Produces in messages.log
Apr 17 18:19:28 localhost kernel: kvm: Nested Virtualization enabled
Apr 17 18:19:28 localhost kernel: kvm: Nested Paging enabled
Apr 17 18:19:40 localhost kernel: Bridge firewalling registered
Apr 17 18:19:40 localhost kernel: tun: Universal TUN/TAP device driver, 1.6
Apr 17 18:19:40 localhost kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Apr 17 18:19:40 localhost kernel: libvirtd[2207]: segfault at 5 ip 00007f44a82e4c81 sp 00007fff94d635d8 error 4 in libc-2.13.so[7f44a8269000+158000]
but further:
root@horus /home/florian # /etc/rc.d/libvirtd stop
:: Stopping libvirtd [FAIL]
root@horus /home/florian # rm /var/run/libvirtd.pid
root@horus /home/florian # /etc/rc.d/libvirtd start
:: Starting libvirtd [DONE]
Now libvirtd is running fine.
Any clue to that?
Another question in this context: virt-manager says when I try to add a new machine that KVM is not available. Though it seems to be just fine. I'm using qemu package and qemu --enable-kvm runs fine (though I haven't done any speed tests yet).
Thanks!

There are quite a large number of topics about problems with flawed and/or failed conversion of mailboxes from Panther to Tiger -- See:
http://discussions.apple.com/thread.jspa?threadID=413196
and
http://discussions.apple.com/thread.jspa?threadID=340466
and the underlying support document at:
http://docs.info.apple.com/article.html?artnum=301315
The multiple Envelope Index related files are an indication of failed attempts to index. Also, the multiple Messages folders are an indication of failed conversion attempts.
Post back here for further assistance, after studying the above links.
Ernie

Where can i get my activation date ,...or first startup phone,..because i lost my warranty and my carier free unlock my iphone 3gs after 24 month

Where can i get my activation date ,...or first startup phone,..because i lost my warranty and my carier free unlock my iphone 3gs after 24 month!
tank you

Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.

IMac restarts itself during first startup of the day

iMac 3.06 GHz Intel Core 2 Duo
MacOS X 10.8.2
Over the last several days, on only the first startup of the day, my iMac, early in the startup process, has interrupted the startup by restarting, then continuing with a normal startup without further action on my part. Upon completion of the startup, and alert reports that "Your computer restarted because of a problem", and asks if I want to report the problem to Apple. The following is an example of the report:
Interval Since Last Panic Report: 44896 sec
Panics Since Last Report:          1
Anonymous UUID:                    6BACAFFC-5CA6-31F8-722F-C7047C4DA267
Sun Dec 2 08:22:21 2012
panic(cpu 1 caller 0xffffff80106b7bd5): Kernel trap at 0xffffff7f91e6cb36, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x000000002513d000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff807b8ed000, RCX: 0xffffff801ced2aa0, RDX: 0xffffff809056ba88
RSP: 0xffffff809056bbb0, RBP: 0xffffff809056bbb0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff807b8ed000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f91e6cb36, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff809056b850 : 0xffffff801061d626
0xffffff809056b8c0 : 0xffffff80106b7bd5
0xffffff809056ba90 : 0xffffff80106ce4ed
0xffffff809056bab0 : 0xffffff7f91e6cb36
0xffffff809056bbb0 : 0xffffff7f91e57182
0xffffff809056bc00 : 0xffffff7f91e570d8
0xffffff809056bc20 : 0xffffff7f91e2840e
0xffffff809056bc50 : 0xffffff7f90ca7350
0xffffff809056bc90 : 0xffffff7f90ca72bf
0xffffff809056bcb0 : 0xffffff7f90cacfb8
0xffffff809056bd40 : 0xffffff7f90ca4e00
0xffffff809056bd70 : 0xffffff8010a33dbb
0xffffff809056bdc0 : 0xffffff8010a63ff7
0xffffff809056be30 : 0xffffff8010697d2f
0xffffff809056be80 : 0xffffff8010620aed
0xffffff809056beb0 : 0xffffff8010610448
0xffffff809056bf00 : 0xffffff801061961b
0xffffff809056bf70 : 0xffffff80106a5b16
0xffffff809056bfb0 : 0xffffff80106ced53
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f90c9b000->0xffffff7f90cd2fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f90c50000
         com.apple.GeForce(8.0)[2E56ED9A-D848-3795-9E52-56BABDC9000C]@0xffffff7f91e27000 ->0xffffff7f91ee9fff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f90c f2000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f90cde000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f90c50000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f90c9b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000010400000
Kernel text base: 0xffffff8010600000
System model name: iMac9,1 (Mac-F2218FC8)
System uptime in nanoseconds: 28473183008
last loaded kext at 28472581893: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f925ab000, size 36864)
loaded kexts:
com.Logitech.Unifying.HID Driver          1.2.0
com.Logitech.Control Center.HID Driver          3.4.0
at.obdev.nke.LittleSnitch          2.5.3
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.1f2
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMuxControl          3.2.11
com.apple.driver.AppleBacklight          170.2.3
com.apple.filesystems.autofs          3.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f33
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.nvenet          2.0.19
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.kext.triggers          1.0
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleUSBHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.37f3
Graphics: NVIDIA GeForce GT 130, NVIDIA GeForce GT 130, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334448312D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334448312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1001FALS-40K1B0, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5670S
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 3
USB Device: hub_device, 0x04cc (Philips Semiconductors), 0x1521, 0x24300000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0x24350000 / 4
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x24353000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0x24352000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 3
Subsequent startups on the same day proceed without interruption and without a problem report, until the first startup of the next day. I normally shut down the computer over night. The iMac operates normally after any of these startups, interrupted or not. Apple Hardware Test reports no problems.
This behavior is annoying, but not very problematic so far. Does anyone have a likely explanation or suggested cure?

BDAqua wrote:
Have you tried just sleeping it at night?
It appears to be graphic card related.
Have you blown the dust out lately?
Thanks very much for answering.
Sleeping the iMac at night would work, I'm sure, since it's only on a cold restart that the unplanned restart occurs. Not as satisfying as curing the issue, though.
Apple Hardware Test reported nothing wrong with the graphic card, but the computer is not cold by the time the test is run, so I guess that could still be it.
I'm sure there is dust inside after three + years. Apple didn't really want me to open up my iMac, but this Core 2 Duo model can be opened by lifting off the glass with suction cups, I believe. Maybe I will do that and dust, and see if that helps. There might even be something I can reseat.
Also, I believe that on my next cold startup I will try single user mode and see if that prevents the restart.
Thanks for your suggestions.

Safari 4.0.3 slow on first Startup after Rebooting/Booting System. 10.6.1

Found this Video and I have excately the same problem.
Safari Slow Startup - Video
On the first startup after system boot safari is very slow. After that everything is back to normal.
What's up with this? Anybody else?

A quick update on this. And @BroSter, find uninstalling instructions for SafariBlock below. CHEERS!
1) ClickToFlash is not the problem. Just update it to v1.6b2 which works flawless for me. Get it here:
http://rentzsch.github.com/clicktoflash/
2) Uninstalling SafariBlock:
Go to Macintosh HD -> Library -> InputManagers and delete the SafariBlock folder. You'll need administrative privileges to do this, and you may need to restart your computer for the change to take effect.

First startup after PC boot takes too long / too slow

Hello there.
I've been experiencing this problem for about a year now but never actually thought it was a problem until I saw how fast FF can really start up on another computer.
Searching this issue on google mostly suggested to delete themes and plugins, emptying cache, etc but it didnt help in my case.
What I noticed is that when starting firefox for the first time on a recently booted computer it takes far too long to start up - 30-60sec. However exiting firefox and then restarting it is actually as fast as it should be. It is always the first startup that takes really long.
I am also sure that it does '''not ''' have to do with the fact that I am trying to start firefox while the whole OS is still loading with all its background processes.
Leaving the OS to load completely and then starting firefox also leads to a slow startup.
I hope someone can help me with this issue.
Many thanks!
Leo
My OS is Win7 64bit, 4gb RAM, using FF 10.0

If you opt in for sending data to Firefox, that includes information about start-up times. The developers use that feedback to analyse problems and improve firefox. As you say themes and other software extensions to Firefox may increase startup times. Another thing you may do to speed up the startup is take the option to load tabs later not immediately.
* use '''Firefox Button -> Options -> | General | -> []Dont load tabs until selected'''
** see [[options window - general panel]]
* for other advice and suggestions read [[Firefox takes a long time to start up]]
* also see [[How can I help by submitting performance data?]]

JMS Warning on weblogic startup

The JMS experts may here know better. Looking hard to resolve this issue relaated to JMS. can anyone help here.
Re: JMS Warning on weblogic startup

I'm not familiar it, but apparently there's a feature in the security subsystem that allows propagating security information for "L2 Caches" via JMS, and it is this feature that's generating the Warning -- not JMS itself.
I do not happen to know how this feature works, what kind of JMS configuration it expects, or if the Warning is simply a natural ephemeral part of the boot/initialization process of the security feature that can be ignored.
You might want to try posting to the "WebLogic Server - Security" newsgroup.
Tom

New Mac Pros won't connect to the first startup volume

I have five new Mac Pros running 10.4.8; I set a couple network volumes as startup items which has always worked fine before. But on these new machines, no matter what the first startup volume is, it gives me this error:
Connection failed
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
Then goes on to connec to the next volume fine. We have a Win2K Server and a Win2003 Server, and it acts the same way with both of them. It seems like something on the Mac must be timing out too fast. I have checked the logs and they don't help me at all. I have repaired permissions, run FSCK, done all the periodic maintenance and safe-booted but none of it has helped. Any ideas what I can do? Thanks!

Though this TIL says 10.3.9 or earlier, I find this might apply...
"Selecting the "Connect automatically when starting TCP/IP applications" option in Network preferences can sometimes cause this issue. "
As well as a few other possibilities...
http://docs.info.apple.com/article.html?artnum=106464

Ssd drive slow to start on first startup

I have a Samsung SSD 840 EVO Drive Model # MZ-7TE750BW that runs fast once it has started. The first startup if more than a day takes longer than the SATA drive it replaced. Once it has started the first time it is very fast and it then waits for me. The first startup I wait for it to get going. I have looked all over and cannot find an answer for this problem. I am thinking it might have something to do with when the drive powers down on its own for power savings (sleep mode) it takes a long time to wake. Is there a way to keep the SSD drive awake always as it is just memory and power use must be low anyways. I am running Mavericks 10.9.4 and 10.9.5 is the same.
Hope someone can help with this problem.

First,
Does your system meet the system requirements to run Blackberry Link
System requirements: BlackBerry Link for Windows
Hardware
Intel compatible 1GHz or higher processor
512 MB of RAM
USB 1.1 or higher USB port
Screen resolution of 1024x768 or greater
100 MB of free hard disk space for typical installation
Software
Windows XP SP3 or later, Windows Vista, Windows 7
Microsoft .NET Framework 3.5 SP1 or an active Internet connection
iTunes 10.1 or later or Windows Media Player 11 or later for music synchronization
http://docs.blackberry.com/en/smartphone_users/deliverables/49672/tom1359418099212.jsp

X99S BIOS can't find boot drive on first startup

I bought a new computer with a MSI x99S motherboard and SSD primary drive and Window 7 installed. On every first startup I get a text display stating no boot disk found. The work around is to bring the bios up (Click BIOS 4 version E7885121 V17.22B3(HM3) ) and exit. The boot order is correct in the settings. This happens every time I start up, I have to go into BIOS make no changes and exit which then goes to a successful OS boot. Something if fubar. OS disk is fine... Very frustration, I got to the point of just leaving it on but after a few days it crashes, so back to the bios boot nightmare. What am I missing?

I think what you bought is a whole PC. The BIOS version seems not a standard BIOS. We can't help since we don't know what did it modify in this vsrsion. I'd suggest report the issue to where you bought.
Also share the boot sequence if possible.

IBook G4 cannot find system after update to 10.4.8 the first startup

Hi,
I recently updated the iBook G4 of my girlfriend from Mac OS X 10.4.6 to 10.4.8. After restart the iBook showed up the icon for not being able to find a system to startup from. I then turned the iBook off and turned it on again, now the iBook started up just fine from the previously updated system.
But since then, every time the iBook becomes started up it's the same procedure: First it cannot find a system to start up from, then we turn the iBook off and on again and then it starts up just fine. Any ideas why?
Additonally, we now found some error with disk utility on the start up disk. I started the iBook from an 10.4.6 installation disk, checked and repaired the disk. The checked it again, no error found anymore... Started up from the iBooks hard drive, checked with the disk utility from the 10.4.8 system there and this one found error again. Does this make sense?
Any ideas are really appreciated!
Regards, Canubis
PowerBook G4 15'', iMac G3 333MHz Grape Mac OS X (10.4.4) Cinema Display 20", .mac, highlighted keyboard

Go to System Preferences > Startup Disk and reselect the system you want to use to startup the computer and then select Restart which should resolve the startup problem.
Started up from the iBooks hard drive, checked with the disk utility
from the 10.4.8 system there and this one found error again. Does
this make sense?
Not sure if this is considered a bug but this has been reported by others which you can ignore.
I use Disk Utility from the Startup volume to repair disk permissions only, never to Verify Disk which you shouldn't use to check the boot volume for any directory errors with Disk First Aid repair via Disk Utility when booted from your Tiger install disc either.
When doing so, better to select Repair Disk right off the bat and if no problems are reported, you are done. No point in selecting Verify Disk to verify again.
If a problem is reported via Verify Disk and you run Repair Disk to repair the problem and if successfully repaired, no point in running Verify Disk again in this situation either. Best to run Repair Disk only and if any problems are reported and successfully repaired, run Repair again until no problems are reported which saves a step/time and is more efficient.
http://www.thexlab.com/faqs/durepairfns.html

Warning message on startup

Hi Everyone,
I'm very new to Fireworks. Just starting to learn it with my
trusty "Macromedia Studion 8 For Dummies"!
On startup I'm getting the message "Problem loading the
content XML. You've requested a language ('en') which does not have
any available content".
The program seems to run ok, but I don't understand what's
causing this message or where I may have requested a language 'en'.
Any ideas anyone? And how do I get rid of the warning
message?
Many thanks for your time if anyone can help - sorry if it's
a dumb question.
Paul

Pwlb wrote:
> The program seems to run ok, but I don't understand
what's causing this
> message or where I may have requested a language 'en'.
>
> Any ideas anyone? And how do I get rid of the warning
message?
This tech note may contain information related to your
problem
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=61246414
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Warning message on startup and 3D disabled

A little while ago I started receiving a message on Photoshop startup saying that 3D requires a minimum of 512mb of vRAM.I havn't made any changes to my hardware.
I have a ATI 5700 graphics card installed, I don't really know what vRAM is but when I run a DxDiag it reports that there is 4095mb on the card, is this the vRAM, i don't know? If not how can I determine how vRAM I have?
Thanks,
Bernie

Pwlb wrote:
> The program seems to run ok, but I don't understand
what's causing this
> message or where I may have requested a language 'en'.
>
> Any ideas anyone? And how do I get rid of the warning
message?
This tech note may contain information related to your
problem
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=61246414
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Jspx tag warning, on first element of jspx, on ALL pages of app.!!

Hello All,
I am getting the below posted warning on the FIRST TAG ON JSPX, RIGHT AFTER JSP:ROOT ELEMENT, FOR ALL JSPX PAGES OF THE APPLICATION!!!
No grammar available for namespace http://java.sun.com/jsf/core, contents fo element view cannot be validated.
So the <f:view> tag for which the above error is coming is the first tag on the page (as shown below).
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns="http://www.w3.org/1999/xhtml" xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html" xmlns:trh="http://myfaces.apache.org/trinidad/html" xmlns:afh="http://xmlns.oracle.com/adf/faces/html" xmlns:af="http://xmlns.oracle.com/adf/faces" xmlns:tr="http://myfaces.apache.org/trinidad">
<jsp:include page="/pages/includes/checklogin.jspx"/>
<f:view> --> warning
The tag libraries are loaded fine (atleast I think so) If the first tag on the jspx is <tr:panelHeader> then the error will be
No grammar available for namespace http://java.sun.com/jsf/core, contents fo element panelHeader cannot be validated.
The application seems to be running fine though.
Please help!!!

Thanks Timo for the reply. checklogin.jspx is not the culprit here. It is a page included in every page for checking user privileges which are specific to our application. This page has been there since the beginning of the application (pre upgrade). We are upgrading from 10.1.3g to 11G.
We are in the process of upgrade and till now we did not see it. We were adding removing some taglibs and after that this warning started to appear. The application seems to be working ok.
I just hope it is nothing serious as we are very close to the deadlines.
Thanks,

I can't open Firefox when I first startup, I have to reboot to open it, why?

I can't open Firefox when I first boot up. I have to reboot to open it. Does anyone know why?

Any sort of error or warning message when Firefox won't start? Have you checked to see if a '''firefox.exe''' process is running in the Windows Task Manager > Processes tab?

Warning on first startup of FCE 4.0

Similar Messages

Maybe you are looking for