Warning on my HD start up disk for the core service remote management

i keep getting this "volumes needs to be repaired when i run Onyx telling me i need to do "command r" at start up to fix permisions. When i go into System Preferences the actual icon of the "start up" disk has a ? mark on top of it.
So i go into start up "command r" and run verify permissions on the Macintosh HD and this is what i am getting.
SUID File" System/library/coreservices/remotemanagement/ARDAagent.app/contents/MacOS/ARDag ent" has been modified will not be repaired.
i am uncertain what this is.. or what needs to be done. i would love any help with this one.

one more question if you do not mind , when i clicked the unhide a programn called easy suite popped up with an app for "go bridge" when i treid to find it it said that it was a windows application and not supprted by Mac... i tried to delete it but it will not delete.. any help with this?

Similar Messages

How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.

How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.

Try calling 1-800-676-2775. Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk). *May* is only because they may not burn disks for Leopard anymore.
If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
Have you considered Snow Leopard?. Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help?

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.

It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam

Start up disk for Macintosh Plus

I need to make a start up disk for a Macintosh Plus I recently acquired. I have a Mac Classic that works. I have tried copying the System and Finder files onto a floppy using the Classic but I always get the message that the files are too large to fit on the floppy disk. What files are essential to a start up disk? Can I actually make one for the plus that will fit on one disk? I am using system 6.x. Thanks for your help.
Stu

Stu,
First of all, remember that the Macintosh Plus only can handle 800K Mac floppies (DSDD/2DD), while the Macintosh Classic is capable of using 1.44 MB (HD). It is possible to format/write/read 800K disks on the Classic.
If necessary, you can find 800 K disk images containing system disks at the Apple download site. However, these are in a MacBinary format (.bin) that has to be decoded (via an appropriate version of StuffIt Expander or StuffIt) on a suitable Mac. The disk images then have to be written to floppies by Disk Copy 4.2 (here).
Jan

HT3964 MacBook 2007 won't start up all of the way it gets the loading circle thing then it just keeps going and a bar thing pops up to load but doesn't and about a few minutes and it shut off. I don't have a disk for the computer or another Mac so what do

need help MacBook 2007 won't start up all of the way it gets the loading circle thing then it just keeps going and a bar thing pops up to load but doesn't and about a few minutes and it shut off. I don't have a disk for the computer or another Mac so what do I do?

I don't have the disk and i tried the shift key and it didn't do anything, i have tried like everything but it won't work and i was givin this computer with a charger and that is all nothing came with it and i don't think that it had the lion thing on it either i never got to that it just won't turn on and i have another mac that was a family members but it won't turn on either at all it won't load anything the screen stays black. so i don't really know at all what to do is there anything else? i don't want to take it anywhere because i have no money for that, and i need this computer for school. Any sugestions?

Getting a replacement start up disk for imac

How to get a replacement start up disk for my imac?
I lost the original startup disk and the mac didn't start up, only with "?" folder.

Call Apple technical support. They can probably sell you a new set of the original disks for a reasonable fee, if your iMac did come with installation disks (Macs that shipped with OS X 10.7 or 10.8 did not come with disks).
Regards.

I have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

i have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

Always want to keep the boot drive with more free space than may seem necessary for performance and to function at its best, 30-40% free or even 50% is not excessive.
Ideal is to separate your system from your data.
You should always have bootable backup / clone of your system
Don't use a green drive for system or data though.
When you are done cloning system and/or data, remove the old original and keep as backup.
Then move the system drive to #1 - no matter what you want to reset the default boot volume to where the system is.
Using Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.1
http://www.bombich.com/software/updates/ccc-3.5.html
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337
By staying with 10.5.8 you are not going to receive security updates, might want to consider 10.6.8.

Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one

Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one suggested how to remove it and that did work. Computer going to Apple hospital Tues. July 3, thank you for all the suggestions.
Phyllis33

There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
There is some info on these pages :
developer site : https://developer.apple.com
developing for iOS 7 : https://developer.apple.com/ios7/
developer support : https://developer.apple.com/support/
developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

How can I designate the disk for the iPhoto library?

how can I designate the disk for the iPhoto library?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Separate hard disk for the appliance?

Hi!
"Create a separate VMware hard disk for the appliance. This is the location where you will store your iPrint files.". Optional. Ok, I understand purpose for separate hard disk for Filr - user files etc., but what purpose does it serve here, with iPrint Appliance? Because, for backup is suggested to create a file and during new appliance install load it. Meaning, iPrint Appliance is probably ok to install in one? Probably is ok to keep all these files in ... general location? Or not? Didn't find anything of this optional disk in backup/restore, either.
Probably I missed something.
More thanks, Alar.

NovAlf wrote:
> No-no, sorry, my English probably not so good to explain. We didn't
> try to upgrade iPrint as Filr, we installed new appliance 1.0.1 and
> attached same disk as it was with 1.0.0, no plans that this disk
> would in any way help upgrading, no-no. Just this kind of install
> didn't succeed even we did not upgrade, but choose clean install
>
(https://forums.novell.com/novell-pro...ease-wait.html).
> Strange, I know, but we were able to install new 1.0.1 after we
> attached a clean new disk, not the with old info one.
> Anyway, may we detach this added disk after we installed appliance
> already?
Ah, I see. Well I've not tried attaching a second disk at all to the
iPrint appliance so I'm not sure of the affects of adding one or
attempting to detach the second disk. Before detaching, take a look at
where it's mounted. I'm assuming it would still be mounted as
/vastorage, and if so look to see what if anything is stored there. If
it's truly empty then you could likely detach it as long as you also
remove the associated line in /etc/fstab which mounts the second disk.
If you see any files in that location, though, then you'd likely need
to redeploy the appliance from scratch making sure to not attach a
second disk during deployment.
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

MULTIPLE SCRATCH DISKS FOR THE SAME PROJECT

Hello... I have a quick scratch disc question:
I have project that is running too low on scratch disk space. Can I use my boot drive (that has FCP on it) as an alternate scratch disk for the same project? Or does one project have to have the same scratch disk?
Thanks!
- TEXASFLOOD

Hi Texasflood,
Having all the media in one place is preferable. Among other things when using multiple scratch disks you always have to make sure and double check that your logging bins are correctly set and that FCP is using the scratch disk you want.
What you could do is use Media manager to move the existing media to the new scratch disk with plenty of space (Media manager will reconnect all the media) and then capture your remaining 24GB in your new scratch disk.
Read about how to use Media Manager in the manual and checkout the paragraph in this linked article titled [Copying And Moving Projects|http://www.kenstone.net/fcphomepage/media_manager_fcp_4balis.html].
If you do use MM choose to copy and not move media, then for the piece of mind check first that everything is in place and working and only then delete the media in your older drive.
G.

Starting Permier Pro for the first time - how do I create a new project?

Starting this software for the first time.
New Project window is asking to load a preset. There are no presets.
This is not good software - I can't get past the first window!
What do I do, please?
TIA

Welcome to CS3.
Before you post any further questions, please take a look at the video tutorials in Adobe's video workshop. I'm not trying to be rude, just trying to save you from having to ask many basic questions that can be answered by watching the video tutorials.
http://www.adobe.com/designcenter/video_workshop/
It is a great resource and can get you up and running. Just select Premiere Pro CS3 from the products window, then select the topic "Getting Started" and finally the title. Start by selecting "setting up a project" under the titles window.
Its like having your own in-house instructor.
However, as Jeff said, the trial version will not have certain features enabled.
Good luck.

Used my girlfriends computer to start my iPad for the first time I was logged into my iTunes account. Now her iTunes in the user on my iPad how do I change it to mine.

Used my girlfriends computer to start my iPad for the first time. I logged into my itunes account. Now the iPad has her iTunes account on it. How do I change it to mine.

You can log out of her account by tapping on the id on the right-hand side of Settings > Store and you can then log in with your id - is that what you want to do ?

Warning on my HD start up disk for the core service remote management

Similar Messages

Maybe you are looking for