WARNING: Page83 data not standards compliant Promise 7 Disk RAID5
Hello experts.
I've following issue. After an distribution upgrade from Solaris 9 to Solaris 10 11-06 we getting an properly error message in /var/adm/messages.
*genunix: [ID 336213 kern.warning] WARNING: Page83 data not standards compliant Promise 7 Disk RAID5 V0.0*
The OS specs: Release 5.10 Version Generic_118833-33 64-bit
The HW specs: Sun Fire 240 (Firmware OBP 4.16.6 2005/05/09 13:03 Sun Fire V210/V240,Netra 240)
2x SCSi 73 Gb HDD on internal SCSI Controller
Promise VTrack 15100 Raid System with two disks arrays a 1,5 TB on a LSI 1030R Controller
IBM TL 4000 with 2 DLT''s and one roboter on a LSI 1030se Controller.
After firmware update we have the same failure in the /var/adm/messages.
Where can be the failure, i'm a little bit confused about that? I need urgently help.
Thanks in advanced.
You may have already got the answer you needed, but here is a little more detail on what is probably happening:
Sun has a function that screens for page 83 SPC-3 spec violations that
was based on SPC-3 rev 14. At that time it roled out , apparently EUI-64 descriptors could only be 8 bytes long. Now 12 and 16 byte lengths are also
supported. Sun should have this in there system as a bug by now. It shoudn't stop anything from working, but is annoying... Opening a call with Sun like the other said would mostly likely get you to this information too.
Similar Messages
-
I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydasOk... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options. -
Hello Sir,
OS version : AIX 6.1
DB version : 11.2.0.3
EBS version : 11.5.10.2
As a part of 11.5.10.2 to R12.1.1 upgrade, I am applying merged patch (9179588:R12.AD.B) with 9477107:R12.AD.B and patch 7461070(R12.AD.B.1 upgrade driver).
I can see AutoPatch warning messages during adpatch session as below so I have not yet started this merged patch. Please suggest.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>adpatch
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications AutoPatch
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Attention: AutoPatch no longer checks for unapplied pre-requisite patches.
You must use OAM Patch Wizard for this feature. Alternatively, you can
review the README for pre-requisite information.
Your default directory is '/fmstop/r12apps/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AutoPatch records your AutoPatch session in a text file
you specify. Enter your AutoPatch log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adpatch.log] : adpatch_u_merged_R12AD11.log
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ?
Please enter the batchsize [1000] : 2000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [FMSTEST] : FMSTEST *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [drix10] : drix10 *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'FMSTEST'
using ORACLE executables in '/fmstop/r12apps/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AutoPatch is verifying your username/password.
The status of various features in this run of AutoPatch is:
<-Feature version in->
Feature Active? APPLTOP Data model Flags
CHECKFILE Yes 1 1 Y N N Y N Y
PREREQ Yes 6 6 Y N N Y N Y
CONCURRENT_SESSIONS No 2 2 Y Y N Y Y N
PATCH_TIMING Yes 2 2 Y N N Y N Y
PATCH_HIST_IN_DB Yes 6 6 Y N N Y N Y
SCHEMA_SWAP Yes 1 1 Y N N Y Y Y
JAVA_WORKER No 1 -1 Y N N Y N N
CODELEVEL No 1 -1 Y N N Y N N
Identifier for the current session is 2987
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/eaaprod.txt
does not exist for product "eaa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/abmprod.txt
does not exist for product "abm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/evmprod.txt
does not exist for product "evm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ipdprod.txt
does not exist for product "ipd".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cssprod.txt
does not exist for product "css".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/meprod.txt
does not exist for product "me".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnmprod.txt
does not exist for product "xnm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xncprod.txt
does not exist for product "xnc".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnsprod.txt
does not exist for product "xns".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/fptprod.txt
does not exist for product "fpt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okrprod.txt
does not exist for product "okr".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cueprod.txt
does not exist for product "cue".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ibaprod.txt
does not exist for product "iba".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozpprod.txt
does not exist for product "ozp".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozsprod.txt
does not exist for product "ozs".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rlaprod.txt
does not exist for product "rla".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/vehprod.txt
does not exist for product "veh".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rhxprod.txt
does not exist for product "rhx".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/imtprod.txt
does not exist for product "imt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ahmprod.txt
does not exist for product "ahm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okbprod.txt
does not exist for product "okb".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okoprod.txt
does not exist for product "oko".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/amfprod.txt
does not exist for product "amf".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cunprod.txt
does not exist for product "cun".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code Language Status
US American English Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
Trying to obtain a lock...
Attempting to instantiate the current-view snapshot...
No baseline bug-fixes info available. Will attempt next time.
**************** S T A R T O F U P L O A D ****************
Start date: Sun Aug 04 2013 18:45:12
0 "left over" javaupdates.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
0 patches uploaded from the ADPSV format patch history files: Sun Aug 04 2013 18:45:12
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
****************** E N D O F U P L O A D ******************
End date: Sun Aug 04 2013 18:45:12
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [/fmstop/patches/R1211AD/merge] :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++I checked under 11i $APPL_TOP/admin directory, I can see only one izuprod.txt file apart from applprod.txt.
drix10:/fmstop/fmstest/fmstestappl/admin>ls -lrt *prod.txt
-rwxr-xr-x 1 appltest dba 231650 Oct 30 2004 applprod.txt
-rwxr-xr-x 1 appltest dba 4966 Sep 21 2007 izuprod.txt
R12 code tree is newly installed so there is only applprod.txt
drix10:/fmstop/r12apps/apps/apps_st/appl/admin>ls -lrt *prod.txt
-rwxr-xr-x 1 appltest dba 226340 Jul 29 15:19 applprod.txt
Please suggest if I can ignore these warning to proceed with applying merged patch. -
Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the serial number. Is it because it wasn't uninstalled on the previous laptop? What to do now?? Thx!
Maybe this can help someone else... I simply had to properly uninstall CS3 and reinstall it again after that. I think that sorted it! I also remember having a similar issue with Macs at work a couple of years back. Not sure whether the same applies to CS5/CS6. Here's a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS. I'm on OS X 10.9.2 but it worked just fine. Remove Creative Suite 3 and CS3 products
-
Warning: untrusted X11 forwarding setup failed: xauth key data not generate
Upon connecting to a RedHat Enterprise Linux server via ssh -X I get the following:
Warning: untrusted X11 forwarding setup failed: xauth key data not generated
Warning: No xauth data; using fake authentication data for X11 forwarding.
I have previously (as in last week, ending 11/1/2008) been able to use x11 forwarding from the machine I'm trying to connect to. This problem also occurs with other servers, meaning it must be a problem with my local machine. Any suggestions are welcome.I get that if I use
ssh -Y ...
but NOT with -X.
Do you have a $HOME/.ssh/config or /etc/ssh_config file that is specifying ForwardX11Trusted?
Mostly I ignore the message when I get it as, my X11 forwarding works OK, AND I'm in an environment where my fellow employees could do much naster things to me (and get fired for it), than spoofing my X11 sessions. -
Warning: SUID file ?? also my disk will not verify storage??
Warning: SUID file ?? also my disk will not verify storage??
True I Dont need to do so many (so to speak) But I use my system mainly for audio production and I always have some new update, plug-in, or this or that I am doing to my system. And In all fear and respect for the ghost bugs computers sometimes get, , I always do repair perm after any update or maintenance, and , so far, knock on wood, My systems for the past 5 years have been trouble free
-
"file not on the local disk" warning when it absolutely is
Using DreamweaverCC2014 for the first time. Working on an older MacPro running Yosemite.
I define a new site, specifying the directory in which my site's files are stored. The site has a single page, called index.htm, in the root directory, which has a link to a CSS stylesheet named "main.css" in a directory called "_css." The CSS file is contained within the directory, and appears in the Files tab of Dreamweaver as expected. The link to the stylesheet is properly formed on the index.htm page.
At the top left of the workspace, I see two buttons: one for "Source Code," which, when selected, displays the source code for the page I am working on. Next to it is a button that says "main.css," which SHOULD allow me to open up the CSS page and edit it. However, when I click this button, I get a caution icon, along with the message that says:
"'main.css' is not on the local disk."
Next to this is a link that says "Get," which I would assume, when clicked, would allow me to find and relink the stylesheet. However, such is not the case. Instead, I get an alert window that says:
"'main.css is not in a defined site"
When I look at the page in Live View, the styled sheet is not shown, rather just the unstyled sheet. Looking at it in a browser, however, does.
The code is correct; I have checked an re-checked it. The files are all in place and show up as expected in the Files panel. Any thoughts on why Dreamweaver thinks this CSS file doesn't exist?As this issue was diminishing my confidence in using the software for a mission-critical project, I contacted Adobe technical support for assistance.
This is a known issue.
The problem has to do with DW getting "confused" if there is any other file in the site root disk that may have the same name. In my case, there was (I tend to name the CSS files for my sites with the terribly generic "main" designation). The rep suggested that I create an entirely new site root, put my file structure into that, and see if the problem resolves. I did two things:
First, I installed a completely new installation of DWCC2014 on my MacPro laptop. No existing site files of any kind on that machine. I then created a new site, using a copy of my original troublesome site's file structure. So, with the exception of the fact that this is on a machine that has no other sites or files, I am repeating the test using the exact same files and folder structure. When I click the Source Code button, I see the HTML source code. And when I click the CSS button...the CSS file displays as expected!
Next experiment...back to my desktop MacPro. I copy the files for the site onto a completely different hard drive from the one I was using in my earlier failed attempt to get this to work. Again, same files and structure, only difference is the physical location of the files on a different hard drive. HTML source code displays, and, when the CSS button is clicked, the CSS page also displays as expected. Problem solved!
So, I hope that my experience (and the solution) is helpful in the event others encounter this same issue. Again, this is a known issue at Adobe, so chances are good one of you out there will have this problem. The solution is to place your files in a completely new site root apart from any other that might have similar file names, so as not to "confuse" DW. -
Disk quota data not available.
I've got quotas enabled for my home dir volume, quotas set for all my users, and they appear to be working (logged-in users show the appropriate amount of space remaining in their home dirs).
But clicking on the Quotas section of Server Admin nets me a blank log page with "Data not available" at the top.
I've seen the quota chart on this machine before in earlier test builds, so I know what I should be expecting, but can't figure out why it's not showing up. Any ideas?
How do I rebuild or reindex the quota system, if that's what I need to do?
Thanks!We are having the same issue since upgrading to 10.4.11. Currently we are investigating the possibility of accessing this information through the terminal using the 'quota' tools. I do not have ready access to the server though so progress is slow.
As far as I can make out if you can run 'fsck' this will the ASCII files that the user and group quotas are stored in and may effect a repair. I haven't yet been able to try this to see if it will work.
Anyone else got any suggestions? -
We have a WD external harddrive previously used with a PC that we want to completely erase and reformat for use with our iMac desktop for use with Time Machine. The drive shows up on the desktop of the Mac, but it does not show up in Disk Utlity, assuming because it's Windows format. Outside of the standard "erase" feature in Disk Utility, is there any way to reformat this drive for Mac OS X? Or how can I get this drive to show up in Disk Utility? Note: The drive functions properly, has power, and we are able to view its current contents through the desktop icon, so it is a working drive. And we are ok with losing all the current data on the drive.
Hmm strange, I had just moved my external Lacie drive from my windows machine to my iMac and it was showing up in disk utility still formatted fat32 or whatever. I would disconnect the drive and restart the machine then replug the drive and try again.
Also not that it will make a difference ( I dont think it will but hey why not ) try accessing disk utility from the install disk? -
I keep getting a Warning that I'm running out of disk space. Even after I deleted all of my photos and e-mail I still show 0 available space. Please help!
Correct KiltedTim the iPhone does not have a disk drive, and it does give an error message about running out of disk space. I'm here searching for how to clear it and/or what causes it. A friends 8gb iphone 3G has started giving her that message. It is not jailbroken, has no videos, 400 songs, 20 apps. The system information says there is 0 bytes free. There is 4.6 Gb of "other" data taking up the remaining free space. None of the few apps on the phone I expect would take up that much space with data. Even her emails and saved text messages shouldn't fill 4GB. New iPhone coming in the next couple of days. Easiest to just reset the old one after the upgrade and redownload the apps to make sure not to mess things up.
-
IPod not recognized by iTunes & Disk Utility - Recognized by System Profile
I have a 40GB iPod Clickwheel (4th Gen?) that i'm trying to fix back to life since my mini was just stolen and i'm out on the road on tour all the time. my iPod actually powers up by itself just fine, the battery life is just peachy, and it can run independently without songs (i'm able to look around just as though i had songs on there - i can play games, alter settings, etc etc.).
However, there's a few things i've noticed!
When i go to the iPod's about menu (when disconnected from the computer), it shows there's no songs, that there's 0 capacity, 0 available - shows that the version is 3.1.1, the serial and model numbers, but the format is unknown.
I've tried plugging the dang thing into my computer to much avail - IF iTunes recognizes it, it says it needs to be restored -- GREAT! so i try to restore the iPod, however, i almost instantly get an error: The iPod cannot be restored because it is currently busy. When i clicked the help tag, it says it's a common problem in iTunes 7.0 - great, i have 8.0.2; and i've tried running everything from a restart on the ipod to a restart on the computer, updating all my system files, running the iPod in disk mode, etc, but nothing seems to make it want to restore.
when i look in system profiler; it shows that the iPod is hooked up to my USB port (which is just fine, and i've never had problems running a click-wheel iPod through that before); however both Disk Utility and iTunes do not acknowledge it's existence. what gives?
is my iPod a goner? how would i go about restoring this so i can use it? I've tried it on my Power PC (Specs below) as well as trying it on an iBook and iMac; with the same results every time. i know it's not the cable, because the iPod actually charged via that cable last night!
any help!?If you can get it to show up in Disk Utility, try reformatting (erasing) it in Disk Utility. If that process completes without stalling or errors, quit Disk Utility and run iTunes. Immediately attempt to do another Restore to install the iPod's software and initialize.
If the iPod does not erase successfully (it should take less than one minute for a standard erase) in Disk Utility, the iPod's hard drive may be faulty. -
Stock report with value and qauntity for given date not month wise
Hi gems,
can any body give me the standard report for Stock value and qauntity for given date not month wise at storage location levelHi
check the report S_P00_07000139 with the option inventory and raw material report- detail and selection date (from, to date same). List will give opening & closing balances with goods movment and their values.
Thanks -
Manual Layout data not saving to trx cube
Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWerHello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil -
Recovering data from RAID 0 working disks on a laptop.
As a former Windows user, I setup a two disks RAID 0 years ago where I put stuff I don't remember. Now I sold my old PC, the RAID controller card broke down, but I retained my working disks because I'd like to recover data stored in there.
Is there any way you guys know to recover data files from those 2 disks? I thought of treating them as external drives (I've got a MBP, so this is the only one expansion option), make images of them, mounting them and then copy the data in my MBP.
Thanks!I would say the Windows PC would be your best bet but the odds of recovering anything at all is still extreme poor even there.
The way RAID 0 works is a bit like dealing cards. When you start a new hand in a card game the dealer deal a card to each player in turn. In the case of RAID 0 the computer is the dealer and the disks are the players.
So what you are attempting to do is undeal the hand. Now while that may sound trival, it is in fact not. Hence on of the reason that everyone says RAID Arrays should always be backed up.
Allan -
Itunes application can not be open the disk can not be read from or writte
itunes can not be opened the disk can not be read from or written to. That is the warning i get when i click my itunes to open it. Problem...
there is no disk:) i have no idea what this warning means.. i have restarted and nothing.. i updated itunes and same warning.. there is no disk in the drive at all..
infact i made sure i was in a room with no other disks.. Help??A few things to try:
• Restore Permissions, using Disk Utility (in ~Applications/Utilities)
• Set the correct Ownership & Permissions for the iTunes folder:
Select the iTunes folder in ~/Users/YourUsername/Music.
Get Info (command-I).
Expand 'Ownership & Permissions' and 'Details:'
You must read: 'You can Read & Write': if not, change it.
Click on the 'Apply to enclosed items...' button.
Hope this helps.
M
Maybe you are looking for
-
My phone is stuck in "connect to itunes" screen and will not budge. I did the recovery thing and it still will not change. PLease help.
-
just like the title says, it's not working out. i'll put more info if need be.
-
Help: Macbook goes into deep sleep instead of sleeping
Any time my Mac is supposed to go into sleep, like when I leave it alone for 15 mins or close the lid, it goes into deep sleep (hibernates). How do I fix this? Also, it started happening after I changed the starup disk from Windows to OS X through th
-
Hi Just recently (a few days) all emails on our Mac when sent to other people or receive one show the full path of info like below: I have blanked out our email with xxxx but not sure why this is happening. Is there a setting that may have changed si
-
Is i7 MacBook Pro faster than iMac?
Hi, Trying to decide between laptop/iMac to buy... Probably a silly question, but I'm not sure how old the current iMacs and MacBook Pros are (When were each released?). What I'd like to know is whether the 15inch MacBook Pro with i7 processor has th