Warning: Problems occurred during synchronization in Charm with virtual sys

Hi Team
I have configured charm with virtual system --(Dev>V01>V02>) as client specific STMS , Where V01 is Quality and V02 is production system; When I do consistency check from solar_project_admin tcode for project created, it shows no errors ;
but when i try to activate the charma and click on "refresh" button , it throws following error
"Warning: Problems occurred during synchronization" ;I have checked the logs in SLG1 for object "/TMWFLOW/CMSCV" ; but
there are no errors except warnings for BC Sets , Can you pl guide what might have gone wrong ?
All the RFC's are working fine and there is no authorization issue in solution manager.
Thanks
Swati

hi,
for the CTS activation you must do all the below,
1. SMSY --> landscape creation
2. RFC Creations
3. Client Specific TMS configuration
4. Prj --> CTS activation.
go through the below doc,
[https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf|https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf]
jansi

Similar Messages

Warning: Problems occurred during synchronization of the system landscape

Hello
I have created systems in system landscape, TMS is working fine, all the configuration steps are completed successfully.
am working in Solution Manager 4, in project change -SOLAR_PROJECT_ADMIN - Project Administration - in 'System Landscape' tab  Change request and when I activate change request management I am getting following messages:
1. Warning: Problems occurred during synchronization of the system landscape
2. The project is not released. Hence cycle can not be created.
Its bit urgent as I m in middle of this activity, please assist me on the same
Thanks
Sharmishtha

Hello Jason & Prakhar
Thanks for your quick response. I am basis person, and configuring this change request management for one of the project.
Jason:
Will you please check with your basis person about these settings and let me know the same. I have set the settings as follows
C= Development (source system)
T = Quality
P = Production
Prakhar:
I have checked with all RFC connections are working fine, authorizations are also properly given.
I didnt get your point No correctly defined maintenance project exists, I have already created project in project administration transaction, assigned the system landscape, I have activated project IMG in IMG Project and then going in change request tab to activate the change request management, where its giving me above error.
More over, as you have mentioned I am getting following message in SLG1:
Project CHARM_GBW not found in the project administration table
This is asking me to do following things:
Synchronize the project in Change Manager with the Solution Manager. Call the Solution Manager with the transaction SOLAR_PROJECT_ADMIN, and go to the 'System Landscape' tab, and then the 'Project Cycle' tab. Select the 'Change Request Management' field, and choose 'Refresh'. Project CHARM_GBW should then be available.
Where do I have to make entry for this? I can see the entry in /TMWFLOW/PROJMAP table too. I dont know what more I need to do for this.
Problem is I cant see Project Cycle tab in System Landscape. Prakhar, frankly I am not able to find any step wise document on this part. So will you please help me with some documents on this? I am from technical side thus there is bit difficulty to understand this scenario from functional view.
I will be grateful for your help,
Thanks
Sharmishtha

Problem occurs during playing video song or movie

Dear Sir,
I hope u well.I want to discuss you this issue that when I play video song a problem occurs during playing video and screen become white colors for 2 or 3 second after 2 or 3 minutes It happens when i start video.It happens during playing video 4 or 5 times it appers screen for 3 or 4 second.Kindly resolve this issue.

Hello @Adnan113 ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, I would uninstall the current browser and download a new one for Windows 8.1. You can do this here.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating.
Have you tried another browser? This link will help you update your browser if needed.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problems occurred during the installation of Adobe Creative Suite 5

What procedures should I follow to correct the errors listed below, which occurred during the reinstallation of programs Dreamweaver CS5 and Flash CS5?
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 11 error(s), 27 warning(s)
WARNING: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 has been updated and has been selected for repair. The patch {0061DED1-0204-44C5-B6E0-FAD6AA00E320} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll will be uninstalled now.
WARNING: Payload:{6E505C8F-2896-11DF-9B64-0013724DD917} DeviceCentral has been updated and has been selected for repair. The patch {03AA8100-8A65-11DF-9F66-0013724DD917} DeviceCentral_3.0.1_AdobeDeviceCentral3-all will be uninstalled now.
WARNING: Payload:{61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) has been updated and has been selected for repair. The patch {07238EEC-C837-4D4F-BED7-BBB341BC7FE6} Photoshop Camera Raw (64 bit)_6.7_AdobeCameraRaw6.0All-x64 will be uninstalled now.
WARNING: Payload:{E995AC53-954A-48D2-A861-613B8D42A9BE} Adobe ExtendScript Toolkit CS5 has been updated and has been selected for repair. The patch {187A7A38-6DD4-4549-AECD-22BA6BC2F002} Adobe ExtendScript Toolkit CS5_3.5.0_AdobeExtendScriptToolkit3.5.0-mul will be uninstalled now.
WARNING: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw has been updated and has been selected for repair. The patch {4E1B59A1-029E-4C16-BBB3-F10D40EBB6EE} Photoshop Camera Raw_6.7_AdobeCameraRaw6.0All will be uninstalled now.
WARNING: Payload:{2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding has been updated and has been selected for repair. The patch {55516693-25E2-4620-BF94-6BA66B00419F} Adobe Player for Embedding_3.1_AdobeAPE3-mul will be uninstalled now.
WARNING: Payload:{0D067D13-C3D7-4EA6-B346-740CD91FD547} Adobe Bridge CS5 has been updated and has been selected for repair. The patch {7F7421AA-3A80-49B2-B88B-611A50C23D30} Adobe Bridge CS5_4.0.5_AdobeBridge4-mul will be uninstalled now.
WARNING: Payload:{E4E188D2-27D5-4E4C-92CE-87F9D24AD2F6} Adobe Extension Manager CS5 has been updated and has been selected for repair. The patch {9AF7B703-B806-4C74-94E5-82963EFC0188} Adobe Extension Manager CS5_5.0.1_AdobeExtensionManager5.0All will be uninstalled now.
WARNING: Payload:{1D913F50-28A4-11DF-A78A-0024E8692489} DeviceCentral_DeviceCentral3LP-pt_BR has been updated and has been selected for repair. The patch {AD40C0C2-8A6B-11DF-9180-0024E8692489} DeviceCentral_3.0.1_DeviceCentral3LP-pt_BR will be uninstalled now.
WARNING: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer has been updated and has been selected for repair. The patch {CC43F132-5096-41FC-A5C2-69E4202AC114} Camera Profiles Installer_6.7_AdobeCameraRawProfile6.0All will be uninstalled now.
WARNING: Payload:{68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X64 has been updated and has been selected for repair. The patch {D8676884-2C59-41BB-B315-486D98A20867} Adobe Media Encoder CS5 X64_5.0.1_AMECore5All_x64 will be uninstalled now.
WARNING: Payload:{7A33510F-1580-42C2-877E-8C5502566292} Adobe Player for Embedding x64 has been updated and has been selected for repair. The patch {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul will be uninstalled now.
WARNING: Payload:{02731921-5711-4E7A-A898-D6BCF0F2A1CD} Adobe CSXS Infrastructure CS5 has been updated and has been selected for repair. The patch {FA2A2592-3F40-456D-ACEC-166CB79D4F98} Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul will be uninstalled now.
WARNING: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 has been updated and has been selected for repair. The patch {0061DED1-0204-44C5-B6E0-FAD6AA00E320} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll will be uninstalled now.
WARNING: Payload:{6E505C8F-2896-11DF-9B64-0013724DD917} DeviceCentral has been updated and has been selected for repair. The patch {03AA8100-8A65-11DF-9F66-0013724DD917} DeviceCentral_3.0.1_AdobeDeviceCentral3-all will be uninstalled now.
WARNING: Payload:{61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) has been updated and has been selected for repair. The patch {07238EEC-C837-4D4F-BED7-BBB341BC7FE6} Photoshop Camera Raw (64 bit)_6.7_AdobeCameraRaw6.0All-x64 will be uninstalled now.
WARNING: Payload:{E995AC53-954A-48D2-A861-613B8D42A9BE} Adobe ExtendScript Toolkit CS5 has been updated and has been selected for repair. The patch {187A7A38-6DD4-4549-AECD-22BA6BC2F002} Adobe ExtendScript Toolkit CS5_3.5.0_AdobeExtendScriptToolkit3.5.0-mul will be uninstalled now.
WARNING: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw has been updated and has been selected for repair. The patch {4E1B59A1-029E-4C16-BBB3-F10D40EBB6EE} Photoshop Camera Raw_6.7_AdobeCameraRaw6.0All will be uninstalled now.
WARNING: Payload:{2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding has been updated and has been selected for repair. The patch {55516693-25E2-4620-BF94-6BA66B00419F} Adobe Player for Embedding_3.1_AdobeAPE3-mul will be uninstalled now.
WARNING: Payload:{0D067D13-C3D7-4EA6-B346-740CD91FD547} Adobe Bridge CS5 has been updated and has been selected for repair. The patch {7F7421AA-3A80-49B2-B88B-611A50C23D30} Adobe Bridge CS5_4.0.5_AdobeBridge4-mul will be uninstalled now.
WARNING: Payload:{E4E188D2-27D5-4E4C-92CE-87F9D24AD2F6} Adobe Extension Manager CS5 has been updated and has been selected for repair. The patch {9AF7B703-B806-4C74-94E5-82963EFC0188} Adobe Extension Manager CS5_5.0.1_AdobeExtensionManager5.0All will be uninstalled now.
WARNING: Payload:{1D913F50-28A4-11DF-A78A-0024E8692489} DeviceCentral_DeviceCentral3LP-pt_BR has been updated and has been selected for repair. The patch {AD40C0C2-8A6B-11DF-9180-0024E8692489} DeviceCentral_3.0.1_DeviceCentral3LP-pt_BR will be uninstalled now.
WARNING: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer has been updated and has been selected for repair. The patch {CC43F132-5096-41FC-A5C2-69E4202AC114} Camera Profiles Installer_6.7_AdobeCameraRawProfile6.0All will be uninstalled now.
WARNING: Payload:{68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X64 has been updated and has been selected for repair. The patch {D8676884-2C59-41BB-B315-486D98A20867} Adobe Media Encoder CS5 X64_5.0.1_AMECore5All_x64 will be uninstalled now.
WARNING: Payload:{7A33510F-1580-42C2-877E-8C5502566292} Adobe Player for Embedding x64 has been updated and has been selected for repair. The patch {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul will be uninstalled now.
WARNING: Payload:{02731921-5711-4E7A-A898-D6BCF0F2A1CD} Adobe CSXS Infrastructure CS5 has been updated and has been selected for repair. The patch {FA2A2592-3F40-456D-ACEC-166CB79D4F98} Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul will be uninstalled now.
WARNING: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5\Pixel Bender Toolkit 2\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.2E6EC2P-1019rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Design Premium CS5\Adobe Pixel Bender Toolkit 2.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5\Pixel Bender Toolkit 2\Pixel Bender Toolkit.exe
ERROR: 16 Unable to delete directory "C:\Program Files (x86)\Adobe\Adobe\AdobePatchFiles". Error 145 A pasta não está vazia.
ERROR: 16 Command ARKDeleteDirectoryCommand failed.
ERROR: 17 Unable to delete directory "C:\Program Files (x86)\Adobe\Adobe". Error 145 A pasta não está vazia.
ERROR: 17 Command ARKDeleteDirectoryCommand failed.
ERROR: 544 Unable to delete directory "C:\Program Files\Adobe\Adobe\AdobePatchFiles". Error 145 A pasta não está vazia.
ERROR: 544 Command ARKDeleteDirectoryCommand failed.
ERROR: 545 Unable to delete directory "C:\Program Files\Adobe\Adobe". Error 145 A pasta não está vazia.
ERROR: 545 Command ARKDeleteDirectoryCommand failed.
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed

uninstall, clean and reinstall per the instructions here, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

"Problem occured during hardware installation...

new hardware may not work"
Its driving me MAD!! I have managed to load and use my iPod successfully on my other PC, but have had no joy with my new laptop.
I have installed iTunes, and updated to the most up to date version.
I have uninstalled and reinstalled iTunes several times, but each time when I connect the iPod to the laptop it the Installation Wizard flashes up for a split second and then comes up with the message "a problem has occured during hardware installation. Your new hardware may not work properly"
Any ideas?

hmmmmm.
perhaps let's try disabling the high speed interfaces on the laptop's USB connections. although the following document is on Toshibas, try the technique from it on your Dell:
iPod not recognized correctly on Toshiba laptop
(don't do a restore at this stage. we're just checking to see if we can get a connection with the high-speed interfaces disabled.)

Alert "An internal exception has occurred during discovery." related with Lync

Greetings All,
I'm facing this alert in one Lync 2013 agent. The problem is the SCOM agent is trying to execute a Lync 2010 PowerShell script in folder “'C:\Program Files\Common Files\Microsoft Lync Server 2010\Modules\Lync'” but this server is Lync 2013 so this folder
does not exist, due to this error is generated the alert.
I have recreated the SCOM health state folder in order to force all discoveries process, but the problem continues after.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Log Name: Operations Manager
Source: Health Service Script
Date: 3/13/2014 1:47:48 PM
Event ID: 223
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: MYSERVER.MYDOMAIN.LOCAL
Description:
DiscoverCluster.ps1 :
-Script Name: Lync Server MP Central Topology Discovery
-Run as account: nt authority\network service
-Execution Policy: Bypass
Value of Source Id is {333B2339-35AA-8115-0B0D-639F319A6333}.
Value of ManagedEntity Id is {4B127CAD-36D6-FCAB-507F-03FF1CF5555}.
Value of Target Computer is MYSERVER.MYDOMAIN.LOCAL.
Failed to load Lync Server Module. Error: The specified module 'C:\Program Files\Common Files\Microsoft Lync Server 2010\Modules\Lync' was not loaded because no valid module file was found in any module directory..
An exception occured during discovery script, Exception : System.Management.Automation.CommandNotFoundException: The term 'Get-CsManagementStoreReplicationStatus' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
at System.Management.Automation.ExceptionHandlingOps.CheckActionPreference(FunctionContext funcContext, Exception exception)
at System.Management.Automation.Interpreter.ActionCallInstruction`2.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Health Service Script" />
<EventID Qualifiers="0">223</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-03-13T12:47:48.000000000Z" />
<EventRecordID>130617</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>MYSERVER.MYDOMAIN.LOCAL</Computer>
<Security />
</System>
<EventData>
<Data>DiscoverCluster.ps1</Data>
<Data>
-Script Name: Lync Server MP Central Topology Discovery
-Run as account: nt authority\network service
-Execution Policy: Bypass
Value of Source Id is {88BB2339-35AA-8115-0B0D-639F31999999}.
Value of ManagedEntity Id is {4B127CAD-36D6-FCAB-507F-77777777}.
Value of Target Computer is MYSERVER.MYDOMAIN.LOCAL.
Failed to load Lync Server Module. Error: The specified module 'C:\Program Files\Common Files\Microsoft Lync Server 2010\Modules\Lync' was not loaded because no valid module file was found in any module directory..
An exception occured during discovery script, Exception : System.Management.Automation.CommandNotFoundException: The term 'Get-CsManagementStoreReplicationStatus' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
at System.Management.Automation.ExceptionHandlingOps.CheckActionPreference(FunctionContext funcContext, Exception exception)
at System.Management.Automation.Interpreter.ActionCallInstruction`2.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame).
</Data>
</EventData>
</Event>
Thanks!

Try adding the NETWORK SERVICE account to the following local groups on the Edge server:
RTC Component Local
RTC Local Administrators
Then restart the System Center Management service.
This fixed it for me. If you look at the membership of the equivalent local groups on a Lync Server 2013 Front End you'll see that these groups contain the NETWORK SERVICE account. Looks to be an oversight by MSFT.
Also you can refer below link, Same issue here
http://social.technet.microsoft.com/Forums/systemcenter/en-US/f164f5a4-8dab-4f28-8cef-5d83d98d78a7/lync-2013-mp-lync-application-discovery-issue-for-the-dmz-servers?forum=operationsmanagermgmtpacks
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Problem occurred during synchronizing the database

Hello Experts,
I did fresh installation of EP 7.0 it waz running fine until yesterday but today the the JControl.Exe is going in stopped state. For your reference i m posting the log_bootstrap file as follws.... PLZ HELP THANK YOU....
[Sep 19, 2008 11:45:54...] [Bootstrap module]> Problem occurred while performing synchronization.
[Sep 19, 2008 2:19:08 PM ] -
[Sep 19, 2008 2:19:08 PM ] Bootstrap MODE:
[Sep 19, 2008 2:19:08 PM ] <INSTANCE GLOBALS>
[Sep 19, 2008 2:19:08 PM ] determined by parameter [ID0541328].
[Sep 19, 2008 2:19:08 PM ] -
[Sep 19, 2008 2:19:11 PM ] Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
     ... 14 more
[Sep 19, 2008 2:19:11 PM ] [Bootstrap module]> Problem occurred while performing synchronization.

Hi Ranendra,
Please confirm if it is full build installer or service pack.
As per the error message you are trying to install Dashboards 4.0 sp09 patch2 update setup. As for the patch update it looks for the tool installed on the machine which is a pre-requisite.
Regards,
Noopur

Error ORA-01460 warning ORA-01461 during running a mapping with parameters

Oracle 10g release2(10.2.0.1.0), OWB 10.2.0.1.31, Workflow server 2.6.4
I have a simple process flow ( start -> mapping -> end).
The mapping consists of 4 input groups(3 ordinary tables<INGRP1, INGRP2, INGRP3> and 1 mapping input parameter operator <INGRP4>), a joiner, a filter, an expression operator and 1 output group.
I want to use two variables in join condition, so I bound two mapping input parameters(<INGRP4.SRC_SYS_CDE> and <INGRP4.ADMIN_ORG_NUM>) with two parameters of the process flow's start activity.
Those two mapping input parameters are of type char, one is 4-char long and the other is 2-char long. So I set both of the two parameters of the start activity as String, one as 08, another as 7504.
My join condition is:
INGRP1.ORGIDT = INGRP2.SOURCEORGANIZATIONNO AND
INGRP2.SOURCESYSTEMCODE = INGRP4.SRC_SYS_CDE AND
INGRP2.ADMINORGANIZATIONNO = INGRP4.ADMIN_ORG_NUM AND
INGRP1.CURCDE = INGRP3.NUM(+)
There are no errors and warnings in validation, generation and deployment process, but when I run the process flow, it always finishes blankly(zero insert) with no error and warning messages. It should insert more than 20,000 rows.
When I run the mapping and set the parameters 08 and 7504 at the parameter prompt, then start, the following error and warning occurs.
Error ORA-01460: unimplemented or unreasonable conversion requested
Warning ORA-01461: can bind a LONG value only for insert into a LONG column
So what's the problem? How can I fix it?

The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

Error occurs during creation of Quotaion with reference to Inquiry

Dear All,
When i am create Quotaion with reference to Inquiry for Export Customer it shows the Error:
Exchange rate of EUR in INR for date 00.00.0000 could not be determined
Message no. V1449
Diagnosis
You have entered a currency for which no valid exchange rate could be determined for the pricing date.
Procedure
Check whether a valid exchange rate for this currency exists for 00.00.0000.
If this is not the case, define an exchange rate in Customizing, providing you have the authorization to do this.
Also when click on error it shows another message like:
Flow control: Entry SAPMV45B, RANF, R1, * , * , * is missing in T185
Message no. V0102
I also maintained Exchange rate for EUR to INR & also for INR to EUR.
When i am create direct quotaion without reference it will create.
Plz give me Solution on the above problem.
Award pts for useful answer.
Thx & Regards,
Pankaj
Message was edited by:
Pankaj Mahajan

Pankaj,
Have you done below?
In the customer master >sales area data> sales tab page, check what is the exchange rate type maintained. Default is "M".
Now, go to SPRO>General Settings>Currencies>Enter exchange rates and under this node, check the value for USD to INR for the Echange rate type maintained in the customer master.
ALSO Create new Inquiry & Quotation after saving exchange rate..and see if error is occuring..
Reward if this helps...
Regds
MM

Problem occurs during closing production order

Hello,
I have a problem regarding production order close status.
After production order settlement when I close the production order, I get the following errors during closing of production order by tcode co02
"UNPROCESSED FUTURE CHANGE RECS FOR ORDER 1016590 PREVENT DEL FLAG"
Please reply me for above errors solution
with regards
sanjay agrawal

Dear,
Please check any unprocessed goods movement in COGI and do the posting and settle the order again
also check any confirmation is made after the settlement

Problem occured during the insatlliation of new hardware?

my ipod wont reconizeneed help

Hi Raul,
I don't think that it has something to do with the size of the data file. I have the same problem but my file has only the size of 36 kB.
I get the error message when I'm trying to watch the preview and when I'm trying to upload the file into the PSA.
Strangely enough it did work yesterday.
I found an OSS-Note but this not our solution (we already run Support Package 13).
Kind regards,
Sebastian.
PS: I saved the file on my local work station and then it worked. Maybe there's something wrong with the connection between the BW-system and the filesystem. (we had some troubles with the server-network-ID lately)
Edited by: Sebastian Hausen on Jun 25, 2010 11:42 AM

"Some problems occurred during installation," "Component install failed," or "Shared components fail

I have read all the info I could find on the above and attempted to try to resolve my problem- with no luck.
I have had this on my computer for 2 years, and all of a sudden it is not working, and I cannot get it reinstalled!
I am getting frustrated, as I need this program back on my computer asap.
Thanks for any help!

I am having similar problems after running updates on our CS5 Master collection the following programs crash when started:
Contribute
Device Central
Dremweaver
Encore
ExtendedScript Toolkit
Fireworks - Updating the Registry
Flash Catalyst
Illustrator
InDesign
OnLocation
PixelBender
I have tried to uninstall these specific programs in the hopes of reinstalling them clean. However, the uninstall fails and it prompts me to restart the computer and to run the uninstaller again. If that fails then to run the clean up script. From everything I've read about that you would need to uninstall everything and then run the script... I am caught in a loop not able to uninstall before running the clean up script.

TS1363 Sync problem occurred during remapping record identifiers. How to solve?

This problem start a few weeks ago and it happens at the end of sync process.
Does it has any solution?

New one on me, but perhaps this will help: http://forums.macrumors.com/showthread.php?t=516590
I'm assuming from that thread that the error relates to syncing organizer data with Outlook or something similar... Might be worth running any consistenty checks that available such as ScanPst.
tt2

My problem is to synchronize Lightroom 4 with Elements 11.

I have another computer with Lightroom 4 and Elements 10 and there is no problems to operate from Lightroom to Elements. I have tried almost everything and spent several hours to find a solution. My both computers are new HP Pavillion and have Windows 7. What shall I do?

You can try to use the link below & I hope that would be helful to you!!
http://www.photoshopelementsuser.com/html/integrate-lightroom-with-elements/
Mandhir

Problem trying to synchronize iCal info with my cell again

After not syncing iCal with my Nokia 6822 for about six months or so (used a Palm for scheduling which I synced with Palm Desktop) I tried to do it again today, checking the 'calender' box under 'Nokia 6822'. When doing this an alert is popping up asking me to open iCal. After this is done I still cannot check the 'calender' box as the alert is popping up again and again and ... Any ideas to get things working again? Deleted the 6822 already and added it again, didn't help.
Sorry for the bad English -- I'm German, but don't be afraid. Thanks for any help.
Detlef

Hi, Erik. I don't watch movies on my Powerbook or download them from the iTunes Store, so I'm certainly no expert on the possible causes of your problem. But here are some thoughts for whatever they may be worth:
You have pretty minimal RAM installed to support any demanding use of the Powerbook in Tiger, so adding RAM is my first thought.
Because watching a movie is a pretty demanding use, you may want to make sure no other applications or processes are running on the computer while you're doing it. In addition to quitting all other applications, try turning off BlueTooth and Airport (if you have them) and disconnecting any USB peripheral devices, some of which may occasionally exchange packets of information with the Mac even when they're not in use. Post back and let us know whether these steps make any difference.
I presume you've downloaded the movie to your internal hard drive and are playing it from there rather than from any other drive - is that correct?

Warning: Problems occurred during synchronization in Charm with virtual sys

Similar Messages

Maybe you are looking for