Warning: The images folder is not inside the site
Warning: The images folder is not inside the site.
Every time I need to upload files to my remote site I get
this error and need re-enter my username / password - I don't know
what changed because I did not used to have to do this. Can someone
direct me on how to address this?
Is the images folder within the root folder for the site
(hint - check the
paths in your local site definition)?
Have you updated your DW to 8.0.2?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Kelly_Greig" <[email protected]> wrote in
message
news:gao9le$cko$[email protected]..
> Warning: The images folder is not inside the site.
> Every time I need to upload files to my remote site I
get this error and
> need
> re-enter my username / password - I don't know what
changed because I did
> not
> used to have to do this. Can someone direct me on how to
address this?
>
Similar Messages
-
The selected folder does not contain the current site's homepage
dreamweaver displays the following message when editting some
sites:
"WARNING: The selected folder does not contain the current
site's homepage. The site map cannot be built."
Then my remote info is cleared!
I know I'm obviously not doing something, but there is no
need to clear my remote info!!
edit: I've selected my home page, but this still doesn't
explain why Dreamweaver feels the need to erase my remote
info!!!> Then my remote info is cleared!
Huh?
This only means that you have not told DW which page is your
home page.
Find it in the local file list, and use the right-click
context menu to so
designate the file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ogre11" <[email protected]> wrote in
message
news:f2293h$7lg$[email protected]..
> dreamweaver displays the following message when editting
some sites:
>
> "WARNING: The selected folder does not contain the
current site's
> homepage.
> The site map cannot be built."
>
> Then my remote info is cleared!
>
> I know I'm obviously not doing something, but there is
no need to clear my
> remote info!!
> -
I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well. All my songs are in the music folder but not in the itunes folder. itunes did not prompt me to move file to trash nor is there an option to remove file to trash bin. How can i delete songs from both the itunes and hard drive at the same time?
aespinoza2210 wrote:
could it be in the itunes folder or does it have to be in the itunes media folder, which is within the itunes folder??
A Espinoza,
The iTunes Media folder is set in Preferences > Advanced, and is the key to most iTunes folder organizational activities. So I doubt that the automatic deletion will work for files that are somewhere else within the folder structure.
However, I have not experimented with that issue in quite a while, so you are welcome to give it a try in iTunes 11. -
How do I get images into the "images" folder with Dreamweaver CS4?
Hi,
I've been following the tutorial by Christopher Heng, on chapter 2, adding images. "Look at the right panel of the web editor. You should see at least two major sections: the top section has a tab entitled "INSERT", and the bottom section has a tab labelled "FILES""...
I don't see the tab "Insert", but do see "Files" and have created a folder in there called "Images", as Mr. Heng explained.
The next step sounds easy enough - copy your image files into the images folder. But for the life of me I can't seem to do this. Can someone PLEASE help me out?
Thank you - LouiseDo you mean you can't get your images into the images folder of your site?
Open the folder with your images in it on the desktop,
not inside dreamweaver,
and open the folder you want to put the images on your desktop too,
so both folders are open,
right click the image, copy and paste it to your website images folder
or double-click the image and drag it across into the website images folder.
You could also open the image in your image editing software and 'save as'
then browse to your website images folder and save there.
Daniel -
Using Pages - Images disappear when not on the 'paper' part of display
using pages for a poster design - need to 'park' some images not on the page itself but to the side - when moved off the 'paper' disappear - just left with the 'outline indicators' - how can I keep the image visible whilst not on the 'page' I'm setting out?
Rod,
To simulate that behavior in Pages, open a blank Page Layout document and arrange the new document window to the side of your working document. To "park" a graphic, select and Command-X in the working document and Command-V in the "parking lot" documemt.
Jerry -
Greetings All,
I really need help, please.
I have a folder on my hard driver with a bunch of subfolders
that include an image directory and image sub directories. It looks
like this:
Krupowki36/images/apartment1
/apartment2
/apartment3
When I work with the images in the html file, I see the
preview. In the case of my index.html file, it points to a picture
in /images/zakopanelogo.jpg. But after I upload the files to my web
site I see that there is NO images folder. And all of the folders
that were under /images are in root directory.
I tried flipping the path between relative path and document
path. The image folder did not show up.
I changed the defaul image path from the default of
krupowki36/images to /krupowki (that didn't help).
Can someone please point me in the right direction?
I would like to have my directory structure replicated exacly
on the target server.
Thanks!!
PaulI figured it out, but I don't know why...
I went into site settings and changed the HOST DIRECTORY
setting from '//' to '/'. After that, it started putting my files
in the correct structure on the host.
I just tried it because I was changing everything else.
Does anyone know what that extra '/' has such a strong
effect? I don't remember putting the two slashes in myself.
Thanks!
Paul -
I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images
that should be inside the folder, as well as # of images in each folder. It also occasionally says the following when I try to even open iphoto: "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." So, I am scared to hit "upgrade" for fear I will never recover any of the images as the wording in this quote seems odd. The photos are not in the trash. Did I lose them all? Do you know if/how I can retrieve them?iPhoto 08?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
I was editing my photos and adding them to a album and suddenly the app is closed marking a erros. I go back and open the application and are not photos. How can I recover them? Are not in the image folder.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Get an Error window, The source folder does not contain any supported camera raw files
I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
EstherHello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.
-
When I am writing an email, I get an alert message that says “The message could not be copied or moved to the drafts folder. Writing to the folder failed. To gain disc space, choose Empty Deleted and choose Compact Folders and try again.”
If I do that, I get a message saying “There was an error copying to the Sent folder,, retry?”
If I retry it sends the uncompleted email. All I can do is keep deleting the message and carry on. Then the whole business might repeat itself.
Help!
FrankBecause the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
I have taken pictures with both my Sony camera and my iPhone of items that are linked to a database that I am building, as well as my website. How can I bypass importing the images into iPhoto and simply downloading the images as "files" not "photos" so I can access them with my database? thanx.
If your Sony has a removable memory card you can use a card reader to copy the image files from to a folder on your Desktop and then move them anywhere you'd like.
Since the iPhone doesn't have a removable memory card you can try using Image Capture to see if you can manually upload the files to a folder on the Desktop.
If you have to import the photos, which are image files, into iPhoto you can then export them out of iPhoto to the Desktop and go from there to your database. Just because they are in iPhoto doesn't prevent you from using them elsewhere.
OT -
The name "Folder" does not exist in the namespace
I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks HalDid you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. -
Information in the case folder is not getting updated in Oracle Credit Mgt
Hi,
I have created an SO and an Invoice for this SO for a particular customer. Now, when I create a credit application and a case folder in OCM for this customer, Fields like Receivables Balance, Credit Exposure, Days Sales Outstanding etc. in the case folder are not getting updated. These fields are not getting updated even after refreshing the case folder. It means that the information from the 'Receivables Responsibility is not getting updated in the case folder.
I have already run the 'Initialize credit Summaries' concurrent program after creating the Sales Order and Invoice.
PS: The case folder gets updated only when I set the Profile Option: "AR: Allow summary table refresh" to Yes and then running the "Refresh AR Transactions Summary Tables" concurrent program. But once this program runs the Profile Option again becomes 'No' (Which is a Standard functionality).
So this is a manual way to update the case folder. My requirement is that the case folder should get updated automatically and no manual intervention should be required.Sumit Malik wrote:
Hi,
I have created an SO and an Invoice for this SO for a particular customer. Now, when I create a credit application and a case folder in OCM for this customer, Fields like Receivables Balance, Credit Exposure, Days Sales Outstanding etc. in the case folder are not getting updated. These fields are not getting updated even after refreshing the case folder. It means that the information from the 'Receivables Responsibility is not getting updated in the case folder.
I have already run the 'Initialize credit Summaries' concurrent program after creating the Sales Order and Invoice.
PS: The case folder gets updated only when I set the Profile Option: "AR: Allow summary table refresh" to Yes and then running the "Refresh AR Transactions Summary Tables" concurrent program. But once this program runs the Profile Option again becomes 'No' (Which is a Standard functionality).
So this is a manual way to update the case folder. My requirement is that the case folder should get updated automatically and no manual intervention should be required.Duplicate post -- Information in the case folder is not getting updated in Oracle Credit Mgt -
I have my first mac. I want to transfer my iTunes library from my pc but the music folder does not appear in favourites when I select finder.
Choose Home from the Finder's Go menu.
(117823) -
Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
ThanksI have same issue - have you solved this yet?
Maybe you are looking for
-
How do I search for a previous question I posted?
Hi How do I find older questions I had posted on the forum/community? I had posted a question a few months prior and had a response. I'd like to look up that resonse again, but I cannot find it in my history. The post is only a few months old, but d
-
To create an executable of java
that it programs I can use to create the executable of java
-
Interim storage area taken in sales orders
Hi all! The sales orders of my client is taking materials in 9** interim storage area, for example, when material is in 902 (GR area). Is there any possibility to restrict the sales order to take materials in count from this areas? Should take only f
-
SDF LDB doesnt pick up documents posted in specific ledger
Hello, I have created a new G/L account 999998 in Q43/700 system and enabled 'Clearing specific to ledger groups'. I created a new ledger C2 and assigned it to the ledger group C2. I have also made a posting to this new G/L account. The table FAGLBSI
-
Hey, I have an older PC with 80GB and want to move all the stuff (pics, videos) to my new Time Capsule. Is this possible?