WARNING !!! the new BIOS (5.2) for 645E max U won't boot with ad

I've just tried to flash the BIOS 5.2 for the MSI 645E max U, and my computer didn't boot after that ! (I've an adaptec 29160).
I tried to reinstall windows XP, and nothing... no recognition of my hard disk, despite it is recognized in the list of bootable devices in the bios setup.
I came back to version 5.1, and all is ok now...
Hope you will fix that in the next version !

Definately not the power supply .. I just tried a 350 watt and a 430 and still same issue. There's only 2 parts I haven't replaced ... the motherboard and the cpu ... so it's got to be either one of them but I don't have any xtra gear here to try :(

Similar Messages

Anyone tried the new BIOS 1.4 for K8N Neo4 Plat?

Has anyone tried the new 1.4 BIOS for nVidia K8N Neo4 Platinum? Does it fix the 220Mhz bug? Does it worth it at all? I am currently with ver.1.1 and running at 2453Mhz at HTT=4, Multi=11, FSB=223, V.Core 1.375v +3.3%, Memory 2.7v at 2-3-3-6-1T
AMD 64 3500+ Winchester
K8N Neo4 Platinum
Corsair Twinx 2x512
NEC ND-3520a
Sapphire Radeon X850XT
Enermax 485W
WD Raptor 74GB

Bios 1.4 Final Works fine on my system....
HTT=2, Mult=11, FSB=237, VCore 1.425 + 9.9%, Memory 2.8V at 2.5-3--3-7-2T 4x 512 (2 x 512 Corsair C2Pros)+(2 x 512 Crucial Ballistix Tracer) 2 Gig Total....
Psygnosi

Is there an emergency eject hole on the newer iMacs. disk stuck in drive and computer won't boot.

Is there an emergency eject hole on the newer iMacs? I have a disk stuck in the drive and the computer won't boot. Need to get this disk out to load repair disk.

If you are getting nothing at all you should take it in for repairs.

The new bios for 875P neo ??????????

Where is it ? X( Where is the new Bios ? X( What's does MSI ? X(

You're telling me, I waited till 7am in the morning gaming while waiting. As of right now, no new bios, yeah MSI, what gives?...

Help with the new Bios 1.56 AND RAM Q

can high voltage for Ram, A-DATA 2X512 DDR500 2.85 for this case, can cause instablity, how do i know when to raise it, because it look like running fine with 2.70, and i oced it to 270mhz , 4000 in sandra. so what should the voltage be? and what problem can high voltage do?
and in the new bios there is the REFRESH RATE (TREF) and some crazy numbers, how should i know what to set it,
in A64 TWEAKER there is same option, Refresh Rate (TREF) , of course i am using the 200mhz, but can the 200mhz 15.6us cause to instabilty instead of the 3.9us ?
when ocing or not? how should i know if it causing any problems?
I am very very confused because i don't know how to oc right, i sometimes have crashes and blue screens when trying to oc, because always there is one option or setting that can make the instablity and to get real, there too Freaking many,
and how do i know for sure that Agressive timing doesn't causing to any errors or anything else? crashes and all kind.
PLZ if someone could answer those question i will be greatly happy, because i have no idea what to look for and i have some anoying problem with that, my ram is good for ocing and i really want stable ram with max speed.
and i think i am using the 1T i cant change it or anything. no where to change anyway.
THANX
AMD64 2800 NewCastle SH7-C0 1.8 @ 2.03 270FSB 1.63V
MSI K8N Nero Platinum 1.56Beta
A-DATA 2X512 DDR500 270mhz 4000sandra 3-4-4-8 1T
ThermalTake ButterFly 550Watt +12 18amp
Elsa Radeon 9800Pro 128mb 378/336
Audigy 2 ZS
PCI Latency 32Clk
FastWrite ON
i will have furture questions just need to get answers on those first.\
Hope someone could help

Quote
Originally posted by pinochio
1)Turn Fastwrites OFF
2)2.85 Volts won't hurt your Ram.(i wish MSI could give us MORE!!)
3)TRef depends on your Ram.I found mine to work best with 200 15.6us
but maybe yours doesn't.Experiment and see.
4)In the BIOS the TRef 1x,2x,3x,4x numers represent the "us" that you see above.
1x=15.6us , 2x=7.8us , 3x=3.9us, 4x=1.95us.The "cycles" you can play with.
5)Don't trust A64 for the Tref value.I have mine set to 15.6 and A64 Tweaker says 1.95
6)Use Rmma "Memory Analyzer" to see and even change your timings.
Went through the bios TREF , i have non 3X options.
This is what i found :
1:1552 100mhz 15,6us
1:2064 133mhz 15,6us
1:2592 166mhz 15,6us
1:3120 200mhz 15,6us
1:3632 100mhz 7,8us
1:4128 133mhz 7,8us
1:4672 166mhz 7,8us
2:1552 100mhz 3,9us
2:2064 133mhz 3,9us
2:2592 166mhz 3,9us
2:3120 200mhz 3,9us
2:3632 100mhz 1,95us
2:4128 133mhz 1,95us
2:4672 166mhz 1,95us
4:1552 100mhz 15,6us
4:2064 not tested ,assumed 133mhz 15,6us
4:2592 not tested ,assumed 133mhz 15,6us
4:3120 200mhz 15,6us
4:3632 not tested
4:4128 not tested
4:4672 not tested
128 cycles 200mhz 1,95us
200mhz 7,8us is missing in my system and setting it with A64Tweaker
cause windows to freeze .
You will find documentation of 1x , 2x and 4x (1K refresh,2K refresh and 4K refresh) here:
http://www.oempcworld.com/support/RAM_Technical_Perspective.htm

Northbridge temps and the new bios update

I know the Northbridge temperature issue has been posted before. But I’m posting in relations to the new bios update supposed to be released 08/24. Will these temp issues be resolved in this new bios update?
There could be many reasons why the Northbridge temps are so high, ranging from bad heatsink design to Northbridge fan blowing too fast. Mine runs 55C idle which is way too high…but when I go to touch the heatsink, it’s barely warm. A lot of people have been complaining about the “light show” on the Northbridge, but heck I like it. I think it’s pretty cool
One last thing I’d like to bring up, this new bios update, I don’t know whether or not 1.6 supports DDR500mhz Ram (because I don’t have it yet) but will it support it? Reason being is I plan on buying DDR500mhz Ram and do some more overclocking.
1:1 Cpu to Ram ratio here I COME!!! :D

ROFLMAO (first sign of insanity when you laugh about a such sad matter)
Maesus, its nothing personal, but do you really believe there will be a v1.8 BIOS? To me it looks like MSI has abandoned the 875P. BIOS v1.7 is supposed to come when? ...August 28th? That's 2 months since the last one and as far as I have heard there has not much changed over v1.6. When is v1.8 supposed to come? Another 2 months later? Not to speak of v1.9... That makes about 5 months to get the board working the way it was supposed to do from the first day (if v1.7 solves something at all).
Sorry, but MSI is about to lose all trustworthiness with this so called support. And moderators in a company's forum who are not even employees of that company, and have to take guesses (see Prescott support) about the products, do not help to make the situation much better (again, nothing personal). If the support team would take a look by themselves on a regularly basis (1-2 times a week) perhaps then the problems would be solved much faster. If I would work like this and not care about the customers I would have lost my job long ago.
There are still many problems. The board is on the market for some months now and memory compatibility and timings are still an issue.
I've visited many forums the last week. And I do hear (read) almost the same everywhere: Poeple who bought the 875P board say its high quality and has good features, if it only would work as supposed. MSI miserably fails to give it a working BIOS. Results in polls about "MSI 875P board good or bad" tend to be weighed horribly to "bad". Most of the ppl will never again buy a MSI board because they feel left alone with their problems.
It is clear that ppl who are satisfied do not post that in forums. But when something is wrong, they do, because they want the problems solved. But what are support forums good for when no one is listening to the complaints?
In times who prices are almost the same for the products, ppl tend to buy that product, that not only has the best features but also good support. When it comes to that MSI is not first choice.

New BIOS (v2.1) for MSI Neo Plat 7030

I noticed that there are some fairly new BIOS versions available for the MSI Neo Platinum v1.0 (7030).
I'm currently on BIOS version v1.7 and that's been stable.
Has anyone tried version v2.1 ?
I've heard bad things about v1.8 so I'm not messing with that.

it is for me
i only updated BIOS when i was trying out some overclocking, and it gave me some better results, than when i was with BIOS 1.4, which i had used for a year previously with no issues
if you don't need to update BIOS, then you don't need to update BIOS; its not like updating a driver
BIOS flashing stupid or not??

New BIOS v1.9 for Neo4 Patinum fixes USB 2.0 problems

The biggest ever (look at the filesize of the bios) BIOS for K8N Neo4 Platinum has been released today. Having in mind how dodgy the previous v1.8 was all they say is "Improve compatilbility problem with some USB 2.0 devices". Well I am with v1.6 and I have problem with Smart CPU target - it does nothing - at 40c CPU fan is running at full speed well below 40c. Sometimes when the mobo decides it starts at half speed, goes to full when CPU temp over 40C, but when CPU temp goes back to 37C it still runs the CPU fan at full speed.
TIRED OF FLASHING. MSI FIX ONE THING, RUINS ANOTHER.AND SO ON AND SO ON AND SO ON..................................... ....................

Well I did have some problems with USB 2.0 External drives so my mother board came with BIOS V1.6 I Jumped and upgraded the Bios to V1.9 and men this has been a circus of problems from Unstable to weird Raid messages but the biggest problem is that the system wont turn off the PC or restart???? from wondow the monitor goes black and the pc keeps working???, I did everything posible in the world to fix this problem and nothing
I hope MSI fix this problem there is a lot of people having the same problem this is my first MSI MB and happens when you change from ASUS or ABIT :( crap!
There is something really disturbing if yo go to the main MSI Computer website -> USA the bios goes from V1.5 to v1.8 and if you go to the msi.com.tw they have V1.6 to v1.9??? it will be good that those guys from MSI have the same thing in both places for the same NEO4 platinum MB???
well go back to v1,6 or wait for the new Bios
regards
NEO4 Platinum
AMD 64 4000+ SanDiego
2GB OCZ PC3200 2T Low Latency Dual Channel kit
XFX 7800GT OC 450Mhz
Audigy 2 ZS
Raid 0 2x200GB MAXTOR DM10 SATA2
2X200 MAXTOR DM10 PATA133

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Design the New process set up for Materials in one physical stock plant

Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RK

RK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum. Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this. If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40). This based on a very small knowledge of your requirements. I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person. I again suggest that you search for professional consulting services to assist you in this project. It will be money well spent.
I am now closing my responses to this thread. Good luck in your project!
Best Regards,
DB49

What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
How much trade-in value can I get from VZW or BestBuy or Amazon?
Thanks!

http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
DROID Bionic: (9/8 launch) – You already know everything about this device, don’t you?
Samsung Stratosphere: (9/8 launch) – 4G LTE device running Android 2.3
HTC Vigor: (10/6 launch) – Will replace the HTC Thunderbolt
LG Revolution 2: (10/20 launch) – Will replace the original Revolution
Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
Samsung Illusion: (9/29 launch) – 3G smartphone running Android 2.3
Samsung Plato: (January launch) – whatever it is, it was pushed to 2012
HTC Bliss: (9/29 launch) – Lower end Android 2.3 device; the chick phone?
Motorola XOOM 4G LTE: (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

TS3212 I need to download the new version of Itunes for my current account, not set up a new account but can not figure out how to do it.

I am trying to download the new version of iTunes for my existing account, not set up a new iTunes account. How do I do this?

The requirement shoul be on the box the iphone came in. they are also on the website
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)"

How good is the new Adobe Reader IOS for fillable forms and interactive pdfs?

At last adobe reader for ios has been updated so now fillable forms can be completed on ipad/iphone but how good is it?
I've tested a form and reset form/print form and save as buttons do not seem to work.
Form submit seems ok, just wondered what others thought?
Also the new Adobe Reader IOS is now able to display interactive pdfs with buttons such as go to next page etc yet page transitions do not work? Again whats everyone elses opinion on the reader ios update?

My preliminary experience is that Reader does better with forms than with interactivity.
I've written a couple postings on InDesignSecrets.com about PDF readers for tablets. Here's the latest one:
Finding the Best Tablet PDF Reader
You should also check out PDF Expert (US $9.99) which handles interactivity better than Reader if that is important to you.

"Unable to connect to server" when trying to accept the new terms and conditions for iCloud.

I keep getting "Unable to connect to server" when trying to accept the new terms and conditions for iCloud. What can I do? I can access the internet, but my clash of the clans applications is failing. The problem started January 1, 2014

I just figured out the problem with my grandma's iphone.
Settings>iCloud>Delete Account
IT WILL NOT DELETE YOUR ACCOUNT. it just takes it off the phone. then you can log back in, and BAM, You're good I hope!
Hope this helps.

WARNING !!! the new BIOS (5.2) for 645E max U won't boot with ad

Similar Messages

Maybe you are looking for