Warning: The sender for the SL-3100 Wireless Headphones is highly susceptible to static shock

I have a jacket that is bad for static, and one day I was wearing it while using my SL-3100 headphones, and the jacket shocked my mp3 player. The mp3 player was ok, but the sender for the headphones won't even turn on anymore.
Message Edited by DuctTapeNinja on 01-23-200807:15 AM

I have a jacket that is bad for static, and one day I was wearing it while using my SL-3100 headphones, and the jacket shocked my mp3 player. The mp3 player was ok, but the sender for the headphones won't even turn on anymore.
Message Edited by DuctTapeNinja on 01-23-200807:15 AM

Similar Messages

  • Good morning a few weeks ago  I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back,  and I can not  return it , i need to you sent me again the box for retu

    Good morning a few weeks ago  I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back,  and I can not  return it , i need to you sent me again the box for return the ipod

    Best thing would be to call Apple up again, and let them what has happened and they'll help you!

  • Error at the moment to send the report for the printer.

    When I execute a report for the Report Builder (Oracle Developer Suite 10g), the report is generated successfully, but, at the moment to send for the printer errors occur: REP-0069/REP-57054/REP-50157 (error 1848).
    Please, help me!!!
    Nádia

    Hi,
    We had the same problem at my organization. Our DBA had to install a patch:
    To implement the solution, please apply the patchset to upgrade to 10.1.2.2.0.
    To obtain a patchset from MetaLink:
    1) Click on Patches & Updates.
    2) Click on Simple Search
    3) Select your product, release and platform.
    4) Patch number is 4960210
    Description PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
    Product Oracle Development Tools
    Release 10.1.2.2
    The Patchset 4960210 is a patch for the Application Server AND Developer Suite
    5) Read any applicable notes before downloading, then click the Download button.
    Note: Please review the Readme file for instructions on how to install the patchset.
    you should launch the installer with the executable setup.exe provided in the patchset, it could shows up a message indicating nothing was upgraded, but the release should be modified to 10.1.2.2
    Hope that helps

  • I can't reset my sequerity question because you didn't send the email for the reset.

    I can't reset my sequerity question because you didn't send the email for the reset.

    If it hasn't arrived after a few hours and isn't in a spam filter, you need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (94629)

  • My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

    My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

    Right click the heading at the top of the message list and select From from the list of options.

  • When i try to open aperture, i get a box popup that says;  Warning-There was an error opening the database for the library "~/Pictures/Aperture Library.aplibrary".

    When i try to open aperture, i get a box popup that says; 
    Warning-There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
    Can anyone help? I cannot accesss aperture. this is the 1st time this has ever happened...
    thanks,

    Try running a repair on the library. Hold the command and option keys down while starting Aperture, this will open the repair window. Select Repair Library.
    See Aperture 3: Troubleshooting Basics
    If you still have problems post back

  • I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library "~/Pictures/Aperture Library.aplibrary". The only option the is to quit. What is

    I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. The only option the is to quit. What is wrong?

    Hi,
    not sure what the problem might be, but you can try the following:
    While pressing ALT+CMD on the keyboard, click on the Aperture icon in the dock: Aperture then opens in a special "recovery mode", and you're prompted to choose what kind of repair you need: Repair Permissions / Repair Database / Rebuild Database
    Considering the situation, I'd recommend you to try "the "Repair Permissions" option first.
    If that isn't enough (and it may well be the case), then go straight for the "Rebuild Database" option; it's a non-destructive opration anyway, but since you've just installed Aperture you shouldn't have anything valuable in the default library...
    NOTE: if you do have some pictures in the library, instead, do a backup first! Time Machine is your friend
    Another option would be to launch Aperture while keeping only the ALT (option) key pressed: Aperture will ask you what library you want to open, or you can choose to create a new one from scratch.
    Good luck!
    Corrado

  • When opening aperture I get Warning that says There was an error opening the database for the library "~/Desktop/Feb 12, 2011.aplibrary".  I'm concerned that my pictures may be lost.  Does anyone know how to deal with this Warning?

    When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.”  That's it. The program does not open at all.  I'm concerned that my pictures may be lost.  Does anyone know how to deal with this Warning? 

    Might just need to rebuild the library...see this link:
    Aperture 3: Troubleshooting Basics

  • Unable to open delivery reports in Exchange 2013 SP1. Gives warning "The status for the recipient can't be determined because of a temporary error. Please try again later."

    This seems to be occurring with all users (have tested a few, all display the same exact error message).
    When I click on "Message Delivery Report" in Outlook 2010 or 2013, it points me to the ECP and displays this message "Warning The status for the recipient can't be determined because of a temporary error. Please try again later." I'm
    not sure which log files to look at. The last time I remember it worked was before I applied SP1, I think CU3.
    Our environment is two servers running Exchange Server 2013 Std. SP1 (847.32) in a DAG.
    Thanks.

    Hi,
    From the error description, I would like to clarify the following thing:
    Delivery Reports is a message tracking tool that you can use to search for delivery status on email messages sent to or from users in your organization's address book, with a certain subject. In Exchange 2013, you can track messages for up to 14 days after
    they were sent or received. Please make sure the message you are tracking isn't older than 14 days.
    Here is an article for your reference:
    Track messages with delivery reports
    http://technet.microsoft.com/en-us/library/jj150554(v=exchg.150).aspx
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • What's the purpose for the two Wireless Antennas on a WAP?

    I have a very simple question, that I'm a little confused about. Here it goes.
    Most Access Points have two antennas. One is labeled as LEFT/PRIMARY and the other is RIGHT.
    What is the purpose for the two antennas? When I have one antenna connected it works without any issues. Can I just use the LEFT/PRIMARY antenna for wireless connectivity? What are the purpose for the two?
    And we are talking about a single band, 802.11b/g NOT 802.11a.
    Thank you!

    Hi Rashida,
    The use of two Antennas on these AP's is used for "Diversity Mode. In many cases, 1 single Antenna will work nicely. Here is an explanation for the use of two Antennas :)
    This describes the use of 2 **Identical Antennas in "Diversity" Mode;
    The purpose of diversity is to overcome multipath reflections. Diversity antennas that share the same physical housing are placed at an optimum distance apart. The maker of the particular antenna determines that distance based on the characteristics of the antenna. When you use a pair of antennas with matching characteristics to provide diversity for cell coverage in your facility, the guideline is to put those matched antennas at a distance apart from each other that is equal to a multiple of the wavelength of the frequency that is being transmitted. The 2.4 GHz wavelength is approximately 4.92 inches. Therefore, to support diversity on a 2.4 GHz radio with two separate antennas, the antennas should be spaced approximately 5 inches apart. The antenna pair could also be spaced at multiples of 5 inches, but the distance between should not exceed 4 multiples: reflected waves farther apart than that are likely to be so distorted and different in delay spread that the radio could not work with them.Because each antenna is selected by itself, both antennas must have the same radiation characteristics and be positioned to provide similar cell coverage.
    **** Two antennas connected to the same access point must not be used to cover two different cells.****
    From this good doc;
    Multipath and Diversity
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008019f646.shtml
    A diversity antenna system can be compared to a switch that selects one antenna or another, never both at the same time. The radio in receive mode will continually switch between antennas listening for a valid radio packet. After the beginning sync of a valid packet is heard, the radio will evaluate the sync signal of the packet on one antenna, then switch to the other antenna and evaluate. Then the radio will select the best antenna and use only that antenna for the remaining portion of that packet.
    On transmit, the radio will select the same antenna it used the last time it communicated to that given radio. If a packet fails, it will switch to the other antenna and retry the packet.
    One caution with diversity, it is not designed for using two antennas covering two different coverage cells. The problem in using it this way is that, if antenna no. 1 is communicating to device no. 1 while device no. 2 (which is in the antenna no. 2 cell) tries to communicate, antenna no. 2 is not connected (due to the position of the switch), and the communication fails. Diversity antennas should cover the same area from only a slightly different location."
    Diversity Antenna Systems
    Diversity antenna systems are used to overcome a phenomenon known as multipath distortion of multipath fading. It uses two **identical antennas, located a small distance apart, to provide coverage to the same physical area.
    From this Antenna reference guide;
    http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html
    Hope this helps!
    Rob

  • HT5312 I forgot the answers for the security questions and I want send the answers for my email

    I  forgot the answers for the security questions and I want send the answers for my email

    Contact iTunes Support:
    Go to Express Lane  and select 'iTunes' from the list of 'products' in the middle of the screen.
       Then select 'iTunes Store', and on the next screen select 'Account Management'
       Next choose 'Apple ID Account Security' and fill in that you'd like your security   
       questions/answers reset.
    You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)
    2. Once your questions have been reset, and you set up new ones, also set up a RESCUE EMAIL ADDRESS, so if you forget them again, you won't have to go through all of this.....
    Cheers,
    GB

  • When I search for sent mail, I only see the sender of the mail (me). I want to see the receiver. How can I change that?

    When I search for sent mail, I only see the sender of the mail (me). I want to see the receiver. How can I change that?

    What kind of mail? gmail?
    Maybe this:
    Sent folder only show senders name in mail apps

  • How many exercises in my ipod before sending for the site of the nike?

    How many exercises I can store in the ipod before sending for the site of the nike?

    i don't believe there is limit.

  • Does the airport time capsule eliminate the need for my cisco linksys wireless router?

    does the airport time capsule eliminate the need for my cisco linksys wireless router?

    I understand that your network now looks like this:
    Modem > Security Router > Cisco/Linksys router > Devices
    If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
    Modem > Security Router > Time Capsule > Devices

  • Warning when the trip for the date already exist

    hi friends
    In the travel. When the trip is applied for a particular date when i again try to apply the trip for the same date it shows only waring but actually it should be a error. I want to make the warning into error. How to make that which BADI is called. Since am applying the trip from my portal. I want to display the warning into error to portal. Which BADI or Function Module is evolved .
    Regards
    vijay

    Hello Vijay,
    As long as there is no expense report linked to a travel request it is   
    possible to create a further request that overlaps with the first one.   
    This system behaviour is generally correct as during the planning        
    phase of a trip it should be possible to create overlapping trips.       
    Thus you only get a warning message that there are already trip dates    
    and not an error (as soon as an expense report has been created an error 
    message occurs if you try to create a new travel request that overlaps   
    the expense report).                                                     
    This is the standard design for overlapping checks concerning travel     
    requests.                                                                
    In TRVPA you can set the warning message into an error message.
    Regards,
    Raynard

Maybe you are looking for

  • How to use classlocator plugin?

    Hello, I've downloaded classlocator plugin from this URL: http://sf.gds.tuwien.ac.at/00-cat/loc/classlocator/ This plugin should index all the jar files at NWDS. After setting it I have an option to locate a class but it doesn't show any jar files. D

  • Can I dual boot lion and OS-10.5.8?

    I want to use my mac pro with Lion for it's iCloud feature and iPad2, but also be able to use some old programs on the MP in 10.5.8.  Can I have both OS on the Mac ?

  • Customer master currency

    Customer master currency to be defaulted in the currency column of price master. what should be done ?

  • Flicker generators

    Hello everyone 1) Which VI's do I need to use if I want a flicker generator signal that has a higher magnitude and another signal of smaller magnitude high frequency noise? 2) Which VI do I need to use to filter a squared signal? 3) How do I display

  • Adobe Flash CS5 - help needed animating a sentence so each word fades in seperately

    I am attempting to make a simple music video. My aim is to have lyrics to the piece of audio appear in synchronisation. There does not seem to be a simple way to fade in (and out) each word singularly allowing the alignment and sentence position to r