Warning upon transfer of quotation from external catalog to SRM

Hello,
We have implemented a punch-out catalog integration between our catalog and the client's SRM solution. However, we are facing an issue at the last stage of the integration -
Upon transfer of the items from our catalog, SAP throws a warning message to the user - "Source of quotation was deleted in vendor system". This is not the case and we are able to link the quotations to the approved orders that we receive at a later point in time. However, the client is unhappy about the user experience and would like us to fix the warning issue. Any help that you can provide in either solving this issue or directing us appropriately will be very helpful.
Thanks in advance
Bala

Hi
Please check the fileds which are getting transfer from your site to SRM and also compare the fields recieve from SRM side
while shopping via View Source.
Bot should be same.
Thanks
Trinath

Similar Messages

XSRF error when returning to SRM from external catalog

Hello,
We recently applied support package stack 19 to our SRM 5.0 development system, and after doing so found that some of our configured catalogs began producing an XSRF error when attempting to populate the SRM shopping cart with items from the catalog. The symptoms encountered are practically identical with those described in Note 1615697 ("Return to SRM application from Catalogs result in Dump"). This error did not occur prior to applying support packages.
In an effort to resolve the problem, we applied the following Notes that described the same or similar symptoms:
1551982: Cross Site Request Forgery Protection for stateless BSP
1596088: frequent dumps in ITS services
1607780: Update #5 to security note 1522651
1613427: ITS Services lead to XSRF Dumps
1615697: Return to SRM application from Catalogs result in Dump
1619323: Frequent Dump issue in ITS
1621525: Dump in Vendor list service
1629031: BBP_BACKGROUND_APPROVAL service results in dump
1632110: Quotation search help fields results in a Dump
1634612: Frequent Dump issue in ITS in Search screens
1650207: BBP_POC service results in XSRF dump
1658516: Applets sheitern an XSRF-Schutz (COOKIE_NOT_FOUND)
1675491: ITS: CALL BROWSER and termination of a session
This did result in some of our catalogs working that previously were dumping, but we are still having issues with at least two and possibly other catalogs. These are external vendor catalogs using the OCI interface.
The error occurs at the time of transmitting items from the catalog back into the SRM shopping cart. The catalog screen is replaced with an error screen with the messages "The URL https://<<our SRM dev system>>:/sap/bc/gui/sap/its/bbpsc03/ was not called due to an error" and "A:ITS_P:019 XSRF no sec_sesstoken". The shopping cart in the SRM system is lost after this error occurs. No short dump is recorded, but the SM21 system log records the ITS_P 019 error against tcode BBPSC03, program SAPLBBP_SC_UI_ITS.
Most of our catalogs, internal and external, are fine after applying the Notes. Just two external vendor catalogs still exhibit this error.
I experimented with adding a new parameter after the Return URL in the catalog configuration in SPRO with name = ~SAP_SESSTOKEN, value = `SAP_SESSTOKEN`, and type = SAP Field, based upon Note 1481392, but this did not make any change in the behavior.
I have patched the kernel (7.00) to pl335 (pl310 is delivered with sps19).
Anyone else having this sort of issue?
Best regards,
Matt

Hi,
What is the error/message you are getting?Please xplain in detail.
Also see these related threads for more pointers:
External Catalog gives HTTP 404 not found error on return
External catalog set-up
External Catalog integration with SAP
Re: OCI External Catalog and Shopping Cart Mapping
Help - Error while transferring item to shopping cart from external catalog
BR,
Disha.
DO reward points for useful answers.

To transfer time events from external time recording system to sap r/3

hi all,
I have a task to make an interface program between external time recording and sap r/3, and then to transfer the time events from that external system to sap system with the help of an rfc, i have got some information like the data first has to be transferred to the table CC1TEV and then from this table the data will be uploaded to 2011 infotype with the help of a standard program, but i am unable to find a solution for making the interface program and the RFC or BAPI which will transfer the records from external system.
if anybody has any information on this plz help me out to solve this problem.

Which recorgding terminals using to capture time events? They should have give some guidelines about this?
Regards
niranjan

How to transfer Lightroom settings from one catalog to another?

Lightroom 5. I have combined two catalogs into one "Master Catalog" per Julian Kosts tutorial ( http://tv.adobe.com/watch/adobe-evangelists-julieanne-kost/lr3-merging-individual-lightroo m-catalogs-into-a-master-catalog-/ ) without incident. However, my presets are not to be found. Could there be other issues? How Do I properly get these presets into my Master Catalog?
How to transfer Lightroom settings from one catalog to another?

Nevermind.
Per the turorials, this is suppose to occur automatically.
In the rare event that it does not, forced by lack of support through Adobe or the forums, I am relagated to resolve my problem the old fasjion way. Guessing at a solution of dragging and dropping (risking overwritting current the newer LR5 files (careful now).
I love the product but trying to get problem resolution here has been disapointing.
I'd like to retract this entire question session.

When trying to transfer a folder from external drive to "users" folder, it says it cannot be modified because it is required by OS X. What does this mean?

When trying to transfer a folder from external drive to "users" folder, it says it cannot be modified because it is required by OS X. What does this mean? How can I transfer the folder?

It sounds like you're trying to replace a home folder. Replace the contents of the folder instead, or use Migration Assistant.
OS X: How to migrate data from another Mac using Mavericks

Partner number from external catalog not transferred to SC

Helo All,
I dont see a partner no in 'ET_SC_PARTNER' in BAdi 'BBP_CATALOG_TRANSFER' when I transfer external catalog item to SC. Is there any config that has to be done to get the vendor number in SC?
Any kind of help is rewarded.
Thanks,
Chandra

Hello Chandra,
Please check your external catalog transfers NEW_ITEM-VENDOR value. If the external catalog is single supplier catalog you can maintain Business Partner in catalog ID detail customizing.
Regards,
Masa

Vendor from external Catalog not assigned to PM Order

Dear Experts,
When connecting to an external catalog from Plant Maintenance in SAP, we are having issues receiving the vendor master number even though it is coming back in the NEW_ITEM-VENDOR in the OCI interface; it is not assigning the vendor in the Order.
- Did anyone have this issue before?
- Any suggestions on what might be going on?
Thanks & regards,
José Omar

Hello Chandra,
Please check your external catalog transfers NEW_ITEM-VENDOR value. If the external catalog is single supplier catalog you can maintain Business Partner in catalog ID detail customizing.
Regards,
Masa

Upload request for Quotation from external data (ME47)

Hi is there a easy way to upload request for change in SAP from external data.
Maybe a functionmodule or BAPI.
Like for transaction ME41 ME42 ME47 etc.
Edited by: J. Paulina on Sep 23, 2008 3:55 PM

For things to happen automatically, you'll need to use JavaScript. To import a record, you use the importTextData document method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.502.html
Note that it can't work with Reader and it must be placed in a trusted function in a folder-level JavaScript file.
To print programmatically, use the print method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.511.html
So the script could loop through the records, printing after each one populates the fields.

External Catalogs of SRM 5.0 not working in SRM 7.0

Hi all,
Iu2019m in the process of converting all SRM 5.0 punchout catalogs to SRM 7.0.
All catalogs are working fine in SRM 5.0 but not in SRM 7.0.
For one I got a problem autologgin into the vendor catalog page.
In SRM 5.0 we are using ITS (no portal). For SRM 7.0 we are using SAP-Portal.
Iu2019ve traced SRM 5.0 punchout and SRM 7.0 punchout:
SRM50:
strUserName=XXXXX&strUserPwd=XXXXX&strLiefNr=XXXXX&HOOK_URL=https%3A%2F%2FXXXXX.XXX.ads%3A8002%2Fsap%28cz1TSUQlM2FBTk9OJTNhYWJhaGFjaGlfU1JEXzAwJTNhZjF2UUpGTlZWa1FFUFZrcDRXcDk5eDEwdDBBSUNnSE01V3pXQkY5Sy1BVFQ%3D%29%2Fbc%2Fgui%2Fsap%2Fits%2Fbbpsc03%2F%3F%7EOkCode%3DADDI%26%7Etarget%3D_top%26%7Ecaller%3DCTLG%26%7Eclient%3D100%26%7Elanguage%3DDE%26%7EHTTP_CONTENT_CHARSET%3Dutf-8&OCI_VERSION=4.0&OPI_VERSION=1.0&returntarget=_top
SRM70:
sap-client=100&sap-language=D&strUserName=XXXXX&strUserPwd=XXXXX&strLiefNr=XXXXX&OCI_VERSION=4.0&OPI_VERSION=1.0&returntarget=_top&HOOK_URL=http%3A%2F%2FXXXXX.XXX.ads%3A8000%2Fsap%2Fsapsrm%2Finbound_hdlr%3FTARGET_URL%3Dhttp%253a%252f%252fvangogh%252eafg%252eads%253a50000%252firj%252fportal%253fNavigationTarget%253dpcd%253aportal_content%252fcom%252esap%252epct%252fspecialist%252fcom%252esap%252epct%252esrm%252esrm70%252fcom%252esap%252epct%252esrm%252ecore%252efl_core%252fcom%252esap%252epct%252esrm%252ecore%252efl_roles%252fcom%252esap%252epct%252esrm%252ecore%252ero_employeeselfservice%252ffl_goshopping%252fcom%252esap%252epct%252esrm%252ecore%252eiv_shop%2526NavMode%253d3%2526UsePost%253dTrue%2526SAPSRM_RESUME_ID%253dSAPSRM_OCI&CATALOG_URL=http%3A%2F%2Fshop.xxxdaten.de%2Fcommerceportal%2Focisrm_autologin.asp
I guess the differences in the punchout call is the reason for the failure in the autologin.
I thought OCI u2013 interface is standardized. Both punchouts are with OCI-Version 4.0, but the call is different!
Have I missed some settings? Is it possible to customize the punchout call e.g. to exclude the system added parameter "sap-client=100" because this is not used ins SRM50 punchout?
Or is it the task of the vendor to customize his system to the SRM 7.0 punchout logic?
Thanks for all of your inputs
Regards
Stefan

All,
We seem into run into similar issues once we upgraded from SRM 5.0 to SRM 7.0 Our catalog punchouts to ARIBA On-deman catalogs are not working. We have opened an OSS message with SAP so far none of the suggested options are working for us. ARIBA is also unable to help us.
We suspect our issue is failing within SAP and OCI is not writing any application logs (SLG1) etc, So it has been difficult to troubleshoot.
From the SRM Portal side, when we try to launch CATALOGS page in SRM 7.0, it fails right away with the following error
"Error connecting to Catalog; contact your System Administrator "
There are no errors anywhere on SRM box to investigate.
We are on SRM 7.0 Support pack level 6. So Note 1429685 - Empty importing parameter in BADI BBP_CAT_CALL_ENRICH is part of support pack 6.
We have also applied the note 1405908 - Issues with 3rd Party catalog integration with SRM 7.0 as per SAP, still no resolution.
Any suggestions !

External Catalog in SRM...

Hi ,
i am working in SRM 4.0 EBP 5.0. <b>i would like to know is there any WEBLOGS avaliable for developing EXTERNAL CATALOG BSP PAGES for SRM SHOPPING CART.</b>
thanks in advance,
Regards,
Kannan.

Hi,
Have a look in the Function WSI_IMPORT_DATA where there is a section for WDA import:
importing Data via Webdynpro
    WHEN c_wdy.
      READ TABLE it_form_fields WITH KEY fieldname = '~XML_TYPE'
      INTO ls_its_context.
    we have an XML document, get it
      IF sy-subrc = 0.
        lv_xml_type = ls_its_context-fieldcont.
        LOOP AT it_form_fields WHERE fieldname <> '~xmlDocument'.
          DELETE it_form_fields.
        ENDLOOP.
        SORT it_form_fields BY fieldindex.
        LOOP AT it_form_fields.
          CONCATENATE lv_xml_document_b64 it_form_fields-fieldcont
          INTO lv_xml_document_b64.
        ENDLOOP.
        IF lv_xml_document_b64 IS INITIAL.
          RAISE import_error.
        ENDIF.
        CLEAR ls_its_context.
        lv_data_format = c_xml.
      ELSE.
      we have the HTML-version, get the complete fields
      longtext has been split up already on the java server
        lt_its_context[] = it_form_fields[].
        lv_data_format = c_html.
      ENDIF.
ENDCASE.
Then the function BBP_WS_IMPORT_SC_DATA is the one used to interpret the data and map the OCI structures to Internal Structures.
There should be enough hints in this code to achieve your requirements or to just reuse a lot of the code here.
Please note these are SRM functions, so I am not sure if they would be available to you in ERP.
Regards,
Jason

How do I transfer iTunes playlists from external HD to PC?

I have have a referbished Dell computer with Windows 7 that I have downloaded iTunes 10 64 bit to. I have a library and playlists from a previous computer stored on an external drive configered to my previous PC. Seeing as my library is too extensive to hold on the computer, I have made a link in the iTunes-Edit- Peferences-Advanced to the external drive and dragged the library to the iTunes window. Now I am wanting to transfer my extensive playlists to iTunes. How do I that?

Hi flyview,
If you are looking to transfer your playlists in iTunes, you may find the following article helpful, in particular this portion:
Transferring playlists
If you want not only your content but also your playlists to exist on your new computer, you will want to transfer a copy of all your playlists from your old computer. To do this, choose File > Library > Export Library on your old computer. Save the XML file that is created to your desktop.
Send the playlists file to yourself as an e-mail attachment, use an external drive, or use file sharing to move the playlists file to your new computer. Once the file is on your new computer, open iTunes and choose File > Library> Import Playlist.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Regards,
- Brenden

Troubleshooting transfer of iTunes from external hard drive to Windows 7 and a new computer

I had to transfer data from a Western Digital external hard drive to a new computer with Windows 7. My iTunes library is there but the individual play lists cannot be found. Are they there somewhere? The data was transferred before iTunes software was installed on the computer.

It transferred over to the My Music folder. Would it be beneficial to start over by deleting the transfer so that iTunes is installed before the music comes into it? Thanks!

How do I transfer my music from external hard drive to itunes library?

Hello everyone!
How do I transfer my .mp3 files from my external hard drive to my itunes library?

Drag them into the open iTunes application window. You may need to copy them to the internal drive first or organize the iTunes library afterwards.
(65802)

Transfer iTunes files from external drive onto new iMac

I had all of my iTunes files on an external hard drive with an old eMac. I want to transfer the files to my brand-new iMac.
It's easy to copy the iTunes Library folder from the external drive onto the iMac hard drive, and change the preferences so that new songs are stored onto the iMac, but it doesn't change the settings for iTunes. Then, if I "Add to Library" I get two copies of everything: the file that's on the external drive PLUS the file that's on the new iMac. If I delete all of the "old" duplicates, it will mess up my playlists.
Isn't there an easy way to point iTunes to the new Library on the iMac and have it change the location setting for all of the songs?

okay, let me rephrase my question:
when you moved your files from the old Mac to the external, did you
(a) drag the entire iTunes folder from <MacintoshHD>/users/<yourname>/music to the external
or
(b) use the +consolidate files+ command to move the files to the external
if (a), connect the external to the new Mac and launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and select the iTunes folder on the external.
if (b), copy the iTunes folder from <MacintoshHD>/users/<yourname>/music on the old Mac to <MacintoshHD>/users/<yourname>/music on the new one, overwriting the iTunes folder in place there. connect the external to your new Mac and fire up iTunes normally.
if you want to move the media files from the external to the internal disk of your new Mac, go iTunes > preferences > advanced and point +iTunes media folder location+ to the iTunes folder in <MacintoshHD>/users/<yourname>/music. also on the advanced tab, make sure there is a tick in the boxes next to +keep iTunes media folder organized+ and +copy files to ... when adding to library+.
then file > library > organize library > consolidate files. this will copy all your media files to the location you specified earlier in the advanced tab. when done, you can (if you want) erase the external and use it for other purposes. or keep the files there and use the external as your backup.
JGG

Can't transfer iPhoto Library FROM external hard drive to iMac

I just bought a new iMac. Before I said goodbye to my old computer (a MacBook), I dutifully backed up my iPhoto library onto an external hard drive. Upon setting up my iMac, I easily accessed the iPhoto library on my HD, but I didn't import it. I was able to see all photos, albums, etc.
But when I went to import the entire iPhoto library into my iMac's hard drive (into the Pictures folder), it wouldn't import. A mesage comes up that says "Preparing to copy" and the blue-and-white bar just spins and spins, without actually copying anything. So, it's weird -- there's clearly communication between iMac and external HD, but I can't take the iPhoto library off the hard drive to make it my new computer's iPhoto library.
Any hints? Thanks.

Have you tried restarting your machine?

Warning upon transfer of quotation from external catalog to SRM

Similar Messages

Maybe you are looking for