Warning when i am trying to refresh security in planning

Hello,
We are getting a Warning we are getting a warning....This is for the first time i am seeing this in Version 11.
WARNING: Refresh will recreate the outline for all the Essbase cubes used in this Application based on the current metadata definition in Planning for this application. Please back up your Outline file and export data from all databases before proceeding. Click 'Refresh' to proceed.
I want to know if i can go ahead and refresh the security if i get this warning and would even like to know why i am getting this.

Hi,
This is just a standard warning that everybody gets, it is just basically saying that you have been warned that anything goes wrong you should always have a backup.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

I just brought a apple protection plan as my phone warranty is going to end in a day, when i am trying to enter the protection plan code and my phone serial no its showing an error message try after some time is there any solution to that?

i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
As i need the warranty to extend for another year please help me regarding this issue.
When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?

Here is some information on the applecare +:
http://www.apple.com/support/products/iphone.html
It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

Security Filter Refresh in Hyperion planning

Hi,
I tried to refresh security for planning through workspace, and the process got finished in veryless time which is unusual, can any one please tell me that where can i check a log for this seurity Flters refresh in hyperion planning
i have gone through the essbase log but didn't find any info
Thx

One example is a user clicking on a report (logging into the workspace directly) and then getting an error that say 'Login fails due to invalid login credentials'. He appears to have the same access as other users that are able to access this report without problem. Also, we have users that are set up exactly as other users who aren't having problems and but aren't able to see the data in the report and then when exporting in query mode into SmartView the user gets #noAccess.

Refresh Security using MaxL command

Hi All,
When trying to refresh security from shared services using the below maxl command:
alter user 'henkej03' sync security with all application;
getting the below error:
[Fri Mar 6 09:06:00 2009]Local/ESSBASE0///Info(1051590)
Synchronization started for user/group [hypadmin]
[Fri Mar 6 09:06:00 2009]Local/ESSBASE0///Error(1051514)
Analytical Services failed to get roles for users and groups for applications during refresh/login sync/user sync from Shared Services Server with Error [CSS Error: Internal Error. Function getmultiUGmultipAppRoleList]
[Fri Mar 6 09:06:00 2009]Local/ESSBASE0///Warning(1051003)
Error 1051514 processing request [Set User/Group List] - disconnecting
Can anyone help me on the above.
Thanks in advance,
Raja

Thanks guys...
but my HSS and LDAP was up and running, I think there was temporary problem in network ... today I got error...
ERROR - 1051514 - Analytical Services failed to get roles for users and group
s for applications during refresh/login sync/user sync from Shared Services Serv
er with Error [Cannot find application with ID ESBAPP:bopelim1_AHQLUBNT118_2].
tried to use "resync all.." but failed...
Checked in HSS and app was not registerd..to HSS :) .. so regiseted with HSS and User was refreshed succesfully !
In case you encounter the "ERROR - 1051514", check if the app is registered to HSS or not?
have a nice time !!!
SD

Getting "Could not Import Universe" error while trying to refresh a Report

Hi,
When we are trying to refresh a report in ZABO in production environment, we are getting an error "Could not import universe".
We are able to import all other universes and refresh all other reports thru ZABO.
Even these reports that are dependent on this universe are getting refreshed in Infoview and Full client. We are continuously facing this issue in ZABO.
We tried the following steps but it did not fix the problem.
1) Go to Tools -> Universes; Select the Universe to be imported and click on "Import" - Result: An error stating "Cannot find Universe".
Click on "Refresh" button and then on "Import" again.
Still the same error " Cannot find Universe"
2) Click on "Data manager" after opening the report. Go to 'Definition' tab -> click on "..." - Result: "Cannot find Universe" error.
3) Go to C:\Documents and Settings\<user name>\Application Data\Business Objects\Business Objects 6.0\lsi\
Take a backup of .rkey and .lsi files of our gateway server and delete them from that location.Then relogin Infoview and ZABO.
4)Go to Internet Options -> Temporary File Settings -> View Objects.
Delete RptViewerAX class and ZaboCheckandRunControl class and relogin infoview and ZABO.
5) Tried creating a new Document based on that Universe.
6)Publish the universe with a different name and try creating a report based on that.
None of these trials worked out. Please help us to fix this issue.
Note: Our Production environment is reverse proxy enabled that has a time out set to 15 mins at webintelligence level. The Error is being observed with in 2 mins from the refresh process started.
Regards
Chaitanya

Hi,
Go to CMC, and check the path in file store where this Universe is stored.
Follow this path and check if this universe is present there.
If you have a local copy, you could open and export this by changing the name and try re-pointint one of the reports.
If it works, you could delete the original and rename it to the original Universe.
Regards,
Jayendra.

Unable to refresh security realm programmatically

Hello everybody!
I'm trying to refresh security realm using MBeans technique.
Here is the simple cfragment of my code:
Set set = mBeanHome.getMBeansByType("Domain");
DomainMBean dmb = (DomainMBean) set.iterator().next();
SecurityMBean smb = dmb.getSecurity();
RealmMBean rmb = smb.getRealm();
System.out.println( "realm=" + rmb.getName() );
System.out.println("before refresh");
rmb.refresh();
At the last point I'm getting the next error:
<30.12.2003 16:47:02 MSK> <Error> <HTTP> <101017> <[ServletContext(id=27551407,
ame=SimpleWebClient,context-path=/SimpleWebClient)] Root cause of ServletExcept
on
weblogic.management.NoAccessRuntimeException: Access not allowed for subject:
p
incipals=[], on ResourceType: Realm Action: execute, Target: refresh
at weblogic.management.internal.Helper$IsAccessAllowedPrivilegeAction.r
n()Ljava.lang.Object;(Helper.java:2149)
at weblogic.security.service.SecurityServiceManager.runAs(Lweblogic.sec
rity.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.Authenti
atedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityService
anager.java:685)
at weblogic.management.internal.Helper.isAccessAllowed(Ljavax.managemen
.ObjectName;Lweblogic.security.service.MBeanResource$ActionType;Ljava.lang.Stri
g;Ljava.lang.String;)V(Optimized Method)
What can I do to avoid this error?

Hi Jake,
thanks for the reply.
I tried sync Native directory.
as it didn't work I also tried running Updatenativedir.bat utility in planning.
I am now getting following error message:
D:\Hyperion\common\utilities\SyncOpenLdapUtility\UpdateNativeDir\updateNativedir
updateNativeDir -cssLocation http://ftlqbihss01:58080/interop/framework/getCSSC
onfigfile -nodelete
java.io.IOException: Property data cannot be loaded from cache.
at com.hyperion.css.common.configuration.CSSConfigurationImplXML.process
Streams(Unknown Source)
at com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(
Unknown Source)
at com.hyperion.css.common.configuration.CSSConfigurationManager.getConf
iguration(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.utils.sync.CSSMigrationUtility.sync(Unknown Source)
at com.hyperion.css.utils.sync.CSSMigrationUtility.main(Unknown Source)
Update Native Directory operation aborted : com.hyperion.css.common.configuratio
n.CSSConfigurationException: Cannot configure the system. Please check the confi
guration. Error Code: 9
NestedException:
java.io.IOException: Property data cannot be loaded from cache.
can you please help me in resolving the issue.

Model no n259tx trying to refresh the windows 8.1 throwing an error

Hi,
Am having an brand new laptop n259tx with pre installed Windows 8.1. When I am trying to refresh the windows it is throwing an error saying. "windows can not complete the installation. To install windows on this computer, restart the installation" but I haven't done anything, I just click only on the refresh button.
So please kindly help me, because am hang up with my important work.
Thanks in advance, for your kind support.

If you are using Windows 8.1 Refresh, then that means you do not mind having everything on the disk deleted.
I suggest that you use the recovery media that you should have created by this time instead of Windows Refresh. That will put your notebook back in the state that is was when it was delivered to you.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Error when trying to refresh the current report-Invalid prompt def.WIS00005

I am trying to create a Webi report using a Universe created with Universe Design Tool 4.0. I have created a new universe with a secured relational connection from a cube in our BBD system. The Universe can be created and exported in UDT (and when I test the connection, I get a message saying the server is responding). I can see values for the BEx query in BEx analyzer.
When I open Webi and connect to a universe, I can see the universe, but when I put a dimension to our results tab and go to "run query", I first get the error "Error when trying to refresh the current report". If I close this error I get the error "Invalid Prompt Definiton - WIS00005". Has anybody else had this issue and if so, where can I begin to troubleshoot the error?

Hi,
Please note that if the object parses at Universe level it may still fail at runtime especially for the prompts.
If you still experience the error after applying Patch 11 please analyze the characteristics of the prompt, get some trace logs with High level of detail, they surely will help.
Thanks!
Best regards,
Simone

Problem when trying to refresh oracle screens with latest data

hello experts,
i have one problem,i want to refresh the oracle screen with the latest data from the data
base.
It is a two stage process.At first step one user will select a row from the screen and then he will press a button .
now the second screen will appear and the detail of the employee will be displayed.
First step has been completed and the data is coming in the second form via parameters and i can see the full information of the employee.
Now i want to refresh the oracle form i.e. suppose if my dba has made any changes in the oracle table( EMP table) i want that after pressing the refresh button user can see the
latest data from the database.
in WHEN_BUTTON_PRESSED trigger i have written this codes.
enter_query;
execute_query;
but they are not giving the expected result.
And one more thing please suggest whether in the second form i should use database item
or non database item.
When i am using database item when i am trying to close second from one pop up is appearing
and asking that whether i want to save the changes.
please suggest how can i remove this message from my application.
Regards
Anutosh

Hi,
what data did you transfer via parameters to the second form ?
how did you populate the datablock in the second form ?
Typical solution would be:
(For my example the block is both forms is named EMP, and is based on the table SCOTT.EMP)
In Form 1, transfer the primary key-value of the current record to a global or parameter (will use global in my example):
e.g. you have a WHEN-BUTTON-PRESSED-Trigger with the following code:
<pre>
:GLOBAL.EMPNO:=:EMP.EMPNO;
CALL_FORM('FORM2');
</pre>
In Form 2, you have a WHEN-NEW-FORM-INSTANCE-Trigger with code:
<pre>
DEFAULT_VALUE('GLOBAL.EMPNO', NULL);
IF :GLOBAL.EMPNO IS NOT NULL THEN
GO_BLOCK('EMP');
EXECUTE_QUERY;
:GLOBAL.EMPNO:=NULL;
END IF;
</pre>
On block EMP in Form 2 there is a PRE-QUERY-Trigger with following code:
<pre>
IF :GLOBAL.EMPNO IS NOT NULL THEN
:EMP.EMPNO:=:GLOBAL.EMPNO;
END IF;
</pre>
And at last, in your refresh-button would be the following code:
<pre>
:GLOBAL.EMPNO:=:EMP.EMPNO;
GO_BLOCK('EMP');
EXECUTE_QUERY;
:GLOBAL.EMPNO:=NULL;
</pre>
Hope this helps

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered.

Aperture: When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered. I can export and open via Photoshop or open directly from file-just not through external editor. Gerry

Hi gerry,
does this happen for a particular image only, or for all images?
And does this happen only from your account or also from other user accounts?
Léonie

Warning when trying to install flash catalyst

I get this warning when I try to install Falsh Catalyst:
Support for CPU extension SSE
This product does not support PowerPC architecture CPU.
Is my computer too much of a dinosaur or something? It's a G5. Help

Thanks for the input Arthurlock,
This is such a bummer. You guys aren't alone in your disappointment. I was extremely excited too. Thank you two for posting. I finally found a relevant post after 5 hrs and change. I couldn't figure out how to resolve this same problem, and I was too stubborn to give in. All I needed was a simple answer, as Arthur stated.
That said, what are our options? I've been running around in circles trying to figure what my next steps should be? ... Any input is welcome. I really don't want to purchase another computer to be able to use the new adobe software. I guess I didn't realize my computer was turning into such a dinosaur...
"Sorry Mac Daddy, no more Christmas Flash Catalyst for you... "
Running on:
imac 1.6GHz PowerPC G5
OSX 10.5.8
Thanks,
Brandi

How to purchase apps in App Store? When I am trying to buy those apps, it is asking for my card details. I have entered my debit card number and then it asked for 3 digit security code. I have entered cvv secure code but it is showing an invalid security

How to purchase apps in App Store? When I am trying to buy those apps, it is asking for my card details. I have entered my debit card number and then it asked for 3 digit security code. I have entered cvv secure code but it is showing an invalid security

Debit cards are no longer accepted in the iTunes Store, it seems. The current valid payment methods are listed here:
http://support.apple.com/kb/HT5552
You can try contacting the iTunes Store and asking if there is any way to use your card, but they probably will tell you that it's not possible.
http://www.apple.com/emea/support/itunes/contact.html
Using a debit card in any online service where it stores your card is a bad idea in any case since if someone gains access to your account in the service, they can quickly drain your bank account. Credit cards limit your liability, as do prepaid iTunes cards.
Regards.

I am trying to set up a mail account but I get a warning that my password cannot be sent securely to the server. how do I correct the problem?

I am trying to set up a mail account but I get a warning that my password cannot be sent securely to the server. How do I correct this so that I can set up my email account?

1. If you haven't tried this already, just delete the user account entirely, and then try setting it up again.
2. To find the permissions file:
     a. hold down the option key
     b. go to the Go menu in the finder
     c. scroll down to Library and open it
     d. in Library, go to Containers/com.apple.mail/Data/Library/Preferences
     e. drag it to the trash and restart.
3. if that doesn't work, go to Applications/Utilities/Keychain Access. In the Keychain Access menu, do Keychain First Aid, and repair.
This should keep you busy for a while.

Hi my account was locked for some security reasons and i forget the securicty questions and when i am trying to reset my password through email i am not gettig mail to my id can any one help

hi my account was locked for some security reasons and i forget the securicty questions and when i am trying to reset my password through email i am not gettig mail to my id can any one help.
<Edited by Host>

Have you checked Spam? I have noticed recently in my Gmail that Google sends some mails from Apple to the Spam folder.
<Edited by Host>

Warning when i am trying to refresh security in planning

Similar Messages

Maybe you are looking for