Warning when launching Aperture

Hi,
I recently updated to Mavericks, and Aperture and Iphoto got updated too.
I opened my library with Iphoto and everything works fine.
I tried to open the same library with Aperture and got this Warning: Repeated crashes can indicate an inconsistency in the database, you should run Repair or Rebuild on your library.
I clicked repair and Repair Permissions but still getting the same Warning. Then I tried to Repair Database but got a new message: This library has been opened with a newer version of Aperture. Repairing the library using this version of Aperture may remove data supported only in newer versions of Aperture.
I havent got any further. I dont want to do anything incorrect and mess up my library.
BTW if i click "cancel", Aperture opens correctly and everything works ok.
Im working like that but the warning message every time I open the app makes me nervous.
Any suggestions??
Thanks in advance for your time and help
Juan

juan,
what are your current versions of Aperture and iPhoto?
and of your Aperture Library?
You can see the versions in the Finder in Column view:
For the libraries look at the "kind" field and the version number:
If the "Kind" is "Photo Library", the update to the most recent versionhas to be done with iPhoto first.

Similar Messages

  • Vault status yellow when launching Aperture?

    I have noticed that when I launch Aperture, the Vault status is always yellow. This is even after I have updated the Vault before I quit Aperture. I think it started after I created a MobileMe Gallery. Is there a correlation?
    -Scrags

    Sounds like the vault might be corrupted. As vaults are just snapshots of the current state of the library I would try making a new one and see if that updates. If it does just abandoned the old vault and use the new.
    If the new vault fails also post back.

  • Prompted 'Warning' when launching Photoshop Elements 8

    Please help! I had downloaded Adobe Elements Inspiration browser (Trial). But when i tired to launch it, there would be a pop-up that said, 'Warning, The Elements Inspiration Browser works best when launched directly from your Adobe Elements Software. Please open Photoshop or Premiere Elements 7 and open the inspiration browser from there.
    Does that means that i have to download Premiere Elements 7? Kindly advise.
    Thanks!!

    You access the inspiration browser from the Help Menu in either Photoshop Elements or Premiere Elements.

  • Firewall warning when launching Captivate 8 on a Windows 8 machine

    Just installed Captivate on a 64bit machine with windows 8.1.  I keep getting a firewall warning dialogue each time I launch the program.  How do I make it stop???

    I was having this same issue with Cp8 in Windows 7. I contacted TCS support and they helped me solve it for me. I asked if they would be willing to reply here with a link to download the fix, but they said "We don’t know, when we will be providing the link to the file, however we will be updating about the same on our forum and hopefully can come up with the link to the file shortly."
    However they don't have an issue with me posting it, so here it is.
    In C:\Program Files\Adobe\Adobe Captivate 8\SWF_Components\ws rename CivitWEb.exe to CivitWeb_bak.exe, or move it to your desktop.
    Download CivitWeb.txt from my Dropbox.
    Move the .txt version to the \ws folder above and change the .txt extension to .exe.
    Launch Captivate.
    Once I placed the file, I no longer got the firewall warnings, and no more buildup of cp session folders. I was also having an issue with browser previews not working, but this filefixed that too. They said that with this file in place, Edge Inspect preview wouldn't work, but it is working for me.
    Hopefully this will help others until Adobe has an official update or fix. I don't know if it will work with Windows 8. Of course this is at your own risk. Good luck.

  • Hyphenation warning when launching InDesign CC

    Every time I launch InDesign CC I am presented with the following warning: “Hyphenation breaks may change if you edit the text in this document.  The following hyphenation services are not installed on this system - Proximity (English: USA)”  What is this and what should I do about it?

    Simple and sweet.  All fixed.  Thanks.

  • Error when upgrading Aperture library on an external drive

    I have a MacBook Pro and am in the process of upgrading to Aperture 3. When Aperture wants to upgrade the existing Aperture library, it fails saying that there is insufficient memory. (My hard drive is very full). I have copied the Aperture library across to a WD external drive and have held down "Option" key when launching Aperture 3 so that I could select the library on the external drive as the preferred library. That went ok. Then when Aperture 3 was some way through upgrading the library on the external drive, it suddenly stopped and gave me this message.
    "There was an error creating a library at the path “/Volumes/External Drive/Aperture Library.aplibrary”. The library could not be created because the file system of the destination volume is unsupported."
    The library also seems to have disappeared off the external drive.
    Any ideas on what I did wrong?

    Hi Paul DT;
    In addition to the suggestions that Allen gave you I would also suggest that once you increase the free space on your internal disk drive that you reboot with install DVD and repair the disk using Disk Utility.
    When you run the free space down that can greatly increase the chances of corrupting the directory on that disk. If you have any corruption in the directory that cause all kinds of strange problems for you until you repair it.
    Allan

  • Warning message when launching iTunes

    I upgraded to iTunes8 and on launching iTunes, the following error message appears "The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of other CD burning software. Please reinstall iTunes." I then reinstalled the "Repair" from the downloaded file (iTunes8Setup), but the warning message still appears after rebooting my computer and launching iTunes . I then removed iTunes from my computer and reinstalled iTunes from this download (iTunes8Setup). I rebooted my computer and launched iTunes, same result. Any ideas on how I can fix this warning message. Please note this warning message did not appear when launching my previous version of iTunes.

    I do not burn any CD's so don't have one to insert into the drive to test the diagnostics. No I am not running 64 bit version of XP.
    See below results from rinning the diagnostics.
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    ACER Aspire E500
    iTunes 8.0.0.35
    QuickTime 7.5.5
    FairPlay 1.0.15
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.1.0.25
    Bonjour 1.0.5.11 (118.5)
    iTunes Serial Number D1F09C78CC** <Edited by Moderator>
    Current user is an administrator.
    The current local date and time is 2008-09-29 21:28:09.
    iTunes is not running in safe mode.
    Video Display Information
    ATI RADEON XPRESS 200 Series
    SAPPHIRE RADEON X300SE
    RADEON X550
    SAPPHIRE RADEON X300SE - Secondary
    RADEON X550 Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {EFAF9826-1BC6-4217-A75F-70968D938047}
    Description: Bluetooth LAN Access Server Driver - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 04:00:03 1970
    Lease Expires: Thu Jan 01 04:00:03 1970
    DNS Servers:
    Adapter Name: {31029B03-6743-4E35-B15F-555C4A5A585E}
    Description: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 04:00:03 1970
    Lease Expires: Thu Jan 01 04:00:03 1970
    DNS Servers:
    Adapter Name: {1A454B26-0287-4327-8BBC-7F3E9B4D5B16}
    Description: WAN (PPP/SLIP) Interface
    IP Address: 86.97.62.8
    Subnet Mask: 255.255.255.255
    Default Gateway: 86.97.62.8
    DHCP Enabled: No
    DHCP Server:
    Lease Obtained: Thu Jan 01 04:00:00 1970
    Lease Expires: Thu Jan 01 04:00:00 1970
    DNS Servers: 213.42.20.20
    213.42.20.20
    195.229.241.222
    Active Connection: ADSL USB MODEM DIAL-UP
    Connected: Yes
    Online: Yes
    Using Modem: Yes
    Using LAN: No
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2008-09-28 06:05:23.
    ** CD/DVD Drive Tests **
    No drivers in LowerFilters.
    UpperFilters: NTIDrvr (1.0.0.6),
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.0.0.35 is currently running.
    iTunesHelper 8.0.0.35 is currently running.
    Apple Mobile Device service 2.10.31.0 is currently running.
    Universal Serial Bus Controllers:
    ALi PCI to USB Open Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA OHCI Compliant IEEE 1394 Host Controller
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number: JQ608FRWTXL
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.

  • Warning message about CMP problem when launching query - how to suppress?

    Dear Experts
    How can I suppress warning message that did not stop the query from running?
    I encounter this message when 1st launching it. The next run , it does not show. But if user run it  i think may still show. How to suppress it?
    The message is :
    =================
    Characteristic [Z_I_NN_FN]Application Sub Grou of the MultiProvider is not provided by the PartProvider ZC_00N; this means it is not identified. However, [Z_I_NN_FN]Application Sub Grou is compounded to 0COMP_CODE and 0COMP_CODE is identified with characteristic Z_I_MM_FM for InfoProvider ZC_006.
    In this case, there is a compounding or CMP problem with [Z_I_NN_FN]Application Sub Grou in the MultiProvider for PartProvider ZC_006.
    Processing characteristics with CMP problems in the data manager is very complicated and can have a negative impact on performance. The data manager cannot use SIDs for these characteristics (at least not in the corresponding InfoProvider) because the initial SID = 0 for [Z_I_NN_FN]Application Sub Grou is not the same as the initial compound key for 0COMP_CODE [Z_I_NN_FN]Application Sub Grou (that is, when real values are posted in ZC_006 for 0COMP_CODE).
    For this reason, hierarchies for [Z_I_NN_FN]Application Sub Grou must often be read at leaf level. Furthermore, it is not possible to use hierarchy aggregates for [Z_I_NN_FN]Application Sub Grou or for the remaining InfoProviders.
    System Response
    Where possible, the system tries to avoid negative impacts on performance. Unfortunately, such performance issues cannot be avoided if the correct results are to be displayed.
    Procedure
    When working with important MultiProviders, you should always avoid characteristics with CMP problems.
    ====================
    Please advise how to address CMP problem error message when launching query.
    regards
    Pascal

    Hi Pascal,
    Why dont you select those compounding objects in Multiprovider itself.As far as i understand while activating the MP it throws an error if compounding objects are not selected.
    One more thing to add which i noticed you can try running the query on analyzer if you are running it on RSRT.
    You can see the data even if MP is not active on analyzer but not on RSRT.
    Hope it helps.
    Regards,
    AL

  • When opening aperture I get Warning that says There was an error opening the database for the library "~/Desktop/Feb 12, 2011.aplibrary".  I'm concerned that my pictures may be lost.  Does anyone know how to deal with this Warning?

    When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.”  That's it. The program does not open at all.  I'm concerned that my pictures may be lost.  Does anyone know how to deal with this Warning? 

    Might just need to rebuild the library...see this link:
    Aperture 3: Troubleshooting Basics

  • HT1941 I have inadvertently changed a file permission setting. When opening Aperture I get the following; Aperture cannot access this library. To use this library make sure it's file permissions are set correctly. I am an old dude new to Mac OS. What up?

    I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?

    Back up all data now.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
    Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Is there a way to remove "Applet running..." when launching Applet in JWS?

    Is there any way to remove the "Applet running..." message at the bottom of the applet when launch in JWS? I have searched in the forum and bug database and cannot find a reference in how to remove it.
    I remember in the old applet days (JDK 1.1, 1.2?), everybody are mad at the yellow warning message when launching a new frame from an applet window. It is hard to believe this issue reappears in JDK 1.4.
    FYI, all the jar files are signed. And I am using JDK 1.4.1.
    Thanks,
    Nelson Fong

    Dietz,
    Thanks for your response. Unfortunately, our application requested all-permission in the jnlp file, and all jar files are signed as well.
    In fact, the warning is more like a status bar. The message was changed from "Initializing Applet..." to "Applet running...." during init() method.
    Any help would be appreciated. Thanks

  • When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered.

    Aperture: When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered. I can export and open via Photoshop or open directly from file-just not through external editor. Gerry

    Hi gerry,
    does this happen for a particular image only, or for all images?
    And does this happen only from your account or also from other user accounts?
    Léonie

  • After Effects Plugin Error when launching

    I recently installed Red Giant Knoll Light Magic Pro plugin and get the following error when launching AE CS4 9.02 on a 2.53Ghz Intel Macbook Pro with 4Gb Ram and Snow Leopard.
    After Effects has encountered an error.
    [/Chincillada/pro/ext/adobe/MediaCore/MediaLayer/VideoFilterHost/Make/Mac/../../Src/AEPlug inVideoFilterModule.cpp-107]
    then I get:
    After Effects can't continue: An output contract violation has occured!
    then:
    After Effects warning: Failed to initialize mediacore
    I have also lodged a support ticket with Red Giant but wanted to see if anyone had experienced, or could shed any light on this error code.
    Thanks

    As a start, move the KLF plug-in out of the shared MediaCore folder (Library:Apllication Support:Adobe and something; not on my Mac ATM) to the conventional AE plug-in folder (Applications:Adobe After Effects CS4:Support Files:Plug-Ins) I've reminded my friends at RG a hundred times, but their installer stil luses bad default locations. If that doesn't fix it, then indeed you have a problem. Which version of the plug-in are you using? Most complaints revolve around v2.5's GPU usage, which is on by default and causes a lot of trouble. Older versions do not do this, so they are more stable....
    Mylenium

  • Launching Aperture issues

    When I launch Aperture, it initializes by showing "opening Aperture library" but after a few seconds it stops and does not open the program.  How do I launch Aperture?  It worked before, not anymore.  I've downloaded latest updates, but still have issues.

    Allen,
    In response to your request, here's my iMac's information:
    Let me know if this helps....
      Model Name:          iMac
      Model Identifier:          iMac11,2
      Processor Name:          Intel Core i3
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          4 MB
      Memory:          4 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          IM112.0057.B00
      SMC Version (system):          1.64f5
    Aperture:
      Version:          3.1.2
      Last Modified:          6/4/11 7:02 PM
      Kind:          Intel
      64-Bit (Intel):          Yes
      Get Info String:          Aperture 3.1.2, Copyright 2005-2011 Apple Inc.

  • Malware Warning after Launch

    We launched a muse site today with ftp upload. Now, after 5 hours you get a malware warning, when you want to visit the site.
    The url changes after editing the correct url and the malware warning appears. What is to be done?

    Thank You  for your quick answer. We found a malware code wich was uploaded to the customers site some moth ago. The old css solution or the hoster must have been the reason therefore. Now everything is fine.

Maybe you are looking for