Warning when the trip for the date already exist
hi friends
In the travel. When the trip is applied for a particular date when i again try to apply the trip for the same date it shows only waring but actually it should be a error. I want to make the warning into error. How to make that which BADI is called. Since am applying the trip from my portal. I want to display the warning into error to portal. Which BADI or Function Module is evolved .
Regards
vijay
Hello Vijay,
As long as there is no expense report linked to a travel request it is
possible to create a further request that overlaps with the first one.
This system behaviour is generally correct as during the planning
phase of a trip it should be possible to create overlapping trips.
Thus you only get a warning message that there are already trip dates
and not an error (as soon as an expense report has been created an error
message occurs if you try to create a new travel request that overlaps
the expense report).
This is the standard design for overlapping checks concerning travel
requests.
In TRVPA you can set the warning message into an error message.
Regards,
Raynard
Similar Messages
-
When i try to open aperture, i get a box popup that says;
Warning-There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Can anyone help? I cannot accesss aperture. this is the 1st time this has ever happened...
thanks,Try running a repair on the library. Hold the command and option keys down while starting Aperture, this will open the repair window. Select Repair Library.
See Aperture 3: Troubleshooting Basics
If you still have problems post back -
I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. The only option the is to quit. What is wrong?
Hi,
not sure what the problem might be, but you can try the following:
While pressing ALT+CMD on the keyboard, click on the Aperture icon in the dock: Aperture then opens in a special "recovery mode", and you're prompted to choose what kind of repair you need: Repair Permissions / Repair Database / Rebuild Database
Considering the situation, I'd recommend you to try "the "Repair Permissions" option first.
If that isn't enough (and it may well be the case), then go straight for the "Rebuild Database" option; it's a non-destructive opration anyway, but since you've just installed Aperture you shouldn't have anything valuable in the default library...
NOTE: if you do have some pictures in the library, instead, do a backup first! Time Machine is your friend
Another option would be to launch Aperture while keeping only the ALT (option) key pressed: Aperture will ask you what library you want to open, or you can choose to create a new one from scratch.
Good luck!
Corrado -
When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.” That's it. The program does not open at all. I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?
Might just need to rebuild the library...see this link:
Aperture 3: Troubleshooting Basics -
2-3 things to watch out for when SAP is the source for a Data Warehouse
Hello
What are 2-3 things to watch out for when SAP is the source for a Data Warehouse (Informatica for ETL and Cognos for reporting)?
Thanks
G. VijayGoing through some or all of this might help:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
http://www.macfixit.com/article.php?story=20070416000657464
Many, including me, have also followed the advice given by others here to add DNS codes to their Network Settings, with good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.220
208.67.220.222
Click on Apply Now and close the window.
Restart Safari, and repair permissions. -
I have an iphone 5s, When i checked for the avialable space it said i had over 3Gb of "Other" files in my iphone. I'v only had my iphone for three days, is it normal to have that much "other" data?
Around a gig is normal.
Also, if you tend to send/receive a lost of MMS messages, that will cause other to increase. Especially if you keep those messages. -
An error occurred while loading the model for the item or data source 'EntityDataSource'.
Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan KumarI'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem! -
What are the settings for apn data and mms for iphone 4 on straight talk?
what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!
They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related. -
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?
In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
My iPod won't let me on to the App Store, and whenever I go on to ITunes, an alert pops up that the certificate for the server is invalid, and that I may be connecting to a server that is only pretending to be iTunes.apple.com and my personal info may be at risk. I downloaded an emulator yesterday from coolroms.com but deleted the app this afternoon. I cleared my safari search data, my cookies and data, and web inspector, which still didn't work. I then proceeded to reset my iPod and then download the newest version of IOS 6.1.5 but yet still am having problems. Also to the App Store and iTunes, several other apps aren't working. Any help here?
Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?
-
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
I changed my username and Password in Itunes on my computer. Now when I use my Iphone, Ipad, it asks for the password for the old username. when I type the password for that old user name, it says it's invalid. I figured I needed to delete the old Icloud account from my Iphone and Ipad, but they ask for the old password for the Old username. I type it in and it says invalid. As of now, I can't use Icloud or Itunes on either the Ipad or Iphone.... Help!
<Edited by Host>If the old ID ("username") is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. already suggested
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Hi there
I am trying to install a HP 6300 printer. I can see it when I look to install initially. Then click on installa nd the process starts and I get a message saying it is searching for the software. However after 20 seconds or so I get the message: Can't install the software for the HP Officejet 6300 series because it is not currently available from the Software Update server. This has happned over and over. I have updated the OSx and am 10.8.5. It works on my Mac Book Pro and did once work on the Mac Book Air but stopped so I unistalled and tried to reintsall but no joy. How can i gte the right drivers onto the laptop so that the seach finds them and connects the printer that it already sees?
Many thanks
RobHello there. I understand you are experiencing issues installing your printer on Mac 10.8.5. This document will provide multiple methods on performing this task: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03378792
Please let me know if you have any other questions or concerns.
I work on behalf of HP
Maybe you are looking for
-
Importing text from XML file, "\n" not working
Hi I'm currently trying to set up my game so it pulls in all text from an external XML file (to make switching between different languages easier). The problem is that on several occasions I need to use the special code "\n" to start a new line (for
-
Hi All, We just started our new Fiscal year, and we are carrying the balances forward. We ran F.07, and selected the new fiscal year and checked both Select Customer and Vendors. Then when i went to check the Account balance for the AR account (121
-
KDE (or GNOME?) non-latin chars input problem
After recent upgrade (pacman -Syu) can't anymore type non-latin characters in GNOME apps (like gEdit, Evolution, Thunderbird etc.) under KDE. Openoffice is still OK. Keyboard layout switching works (can see the difference between US and GB layouts, b
-
I moved an event to the trash using iMovie 10.0.2. It didn't appear in the trash area on the desktop. I know there's another trash area. Where would that be?
-
IWeb still won't publish. At All. Tired and fed up
Hi, yesterday I posted a Help note saying that iWeb was refusing to publish my website. I got some advice back from James Tseng (thanks James) saying I should keep trying. Well, I have kept trying - this is a day later - and i still get the message: