Warning while activating data source 0BBP_TD_CONTR_2

Hi Friends,
We are installing some business content data source from SRM system and while activating the data source of purchasing contracts (0BBP_TD_CONTR_2) we are getting the below warning message
"The even-numbered length of the DEC field PS_TH_AVAIL_AMT can lead to problems".
We have checked the field PS_TH_AVAIL_AMT and found its having the length of 20. Also it seems to be an standard field its not allowing us to change the size
Though we can consider its an warning we have received only 0 records in the extractor (RSA3) even the data source is in active state in RSA6.. Data is not being fetched due to the above warnings?
Please suggest and help us on this if someone have faced the similar kind of issue..
Regards,
Saravanan.M

That warning not causing as of now.
Ask your source team to maintain some data and later do the extraction at RSA3.
But in future it may cause if your field PS_TH_AVAIL_AMT value is more length than defined.
So ask your source team and find what is the maximum length of that value going to use/enter at source side.AS i know source team may enter the value as per the limits. But if you fill that field thru any calculations that may causes you.
Even there itself it mentioned SAP note. so please go thru that and use it in future if caused field PS_TH_AVAIL_AMT length.

Similar Messages

Error while activating data source in BI

Hello Team
I am facing issues while activating data source. I followed following steps .
a)First i created my target
b)Then i made my Primary key as info provider
c)Then i created one source system under file.
d)Then i went to data source and created one application component
e)In this application component i created my data source
f)In this data source i imported my file and all the settings. Now when i am checking then it is not giving any error . But when i am trying to activate it it is giving error . Please find the supporting screesnhots . Can anyone please suggest me as to what is going wrong .

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

Error while activating Data source

Hi,
I hit an error while activating data source with adapter 'WEB_PUSH web service'.
The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
I can't find much detail on this error.
Has anyone hit this error before and if you did can you please let me know what to check?
Thks & Regards,
Bbee

Hi,
I am having the same problem. Have you been able to solve the issue since you posted this last year?
Thanks,
TCT

Time out while activating Data Source

Hi All,
I am faced with a problem. I am trying to load a cube from a flat file Data Source. I create the data source and save it, but when i try and activate it...it just keeps running for a long time and gives a timeout error.
I have created Info Objects and even a Info Cube...i am able to save and activate them without a problem, its only the data sources that give me this problem
Can somebody throw some light on this issue.
Thanks
Ravi.

Hi,
can u plz paste ur error here .. It helps us to answer in a better way .
from ur posted message .. try this ..
change parameter icm/keep_alive_timeout .. but u need to bounce the system as it not dynamic parameter.
Thanks

Invalid character error while activating data in DSO.

Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoop

Hi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
    data: l_d_length like sy-index,
             l_d_char type c,
             l_d_index type sy-index,
          l oopx like sy-tabix.
    data : xinfobj(30) type c value 'RABC'.    -> this is ur infoobject name
    clear : result.
    call function 'CONVERSION_EXIT_ALPHA_INPUT'
      exporting
        input = tran_strucutre-XYZ     -> object name in ur structure
      importing
        output = result.
    l_d_length = strlen( result ).
    do l_d_length times.
      l_d_index = sy-index - 1.
      l_d_char = result+l_d_index(1).
      call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
        exporting
          i_chavl                 = l_d_char
          i_iobjnm                = xinfobj
    I_S_COB_PRO             =
    I_T_COB_PRO_CMP         =
       exceptions
         chavl_not_allowed       = 1
         others                  = 2
      if sy-subrc <> 0.
        result+l_d_index(1) = ' '.
      endif.
    enddo.
Regards;
Jitendra

DBIF_REPO_SQL_ERROR short dumps while activating data in ODS

Hi All,
We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
Runtime Error          DBIF_REPO_SQL_ERROR
Date and Time          08.01.2008 13:01:08
     1. A printout of the problem description (short dump)
        To obtain this, select in the current display "System->List->
        Save->Local File (unconverted)".
     2. A suitable printout of the system log
        To obtain this, call the system log through transaction SM21.
        Limit the time interval to 10 minutes before and 5 minutes
        after the short dump. In the display, then select the function
        "System->List->Save->Local File (unconverted)".
     3. If the programs are your own programs or modified SAP programs,
        supply the source code.
        To do this, select the Editor function "Further Utilities->
        Upload/Download->Download".
     4. Details regarding the conditions under which the error occurred
        or which actions and input led to the error.
     Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
     Please check the entries in the system log (Transaction SM21).
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     use the following search criteria:
     "DBIF_REPO_SQL_ERROR" C
     "SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
     "CHECK_IF_ANALYZE_IS_NESSESSARY"
System environment
    SAP Release.............. "640"
    Application server....... "psapdb"
    Network address.......... "158.58.65.11"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "00CD615C4C00"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 22
    Short dump setting....... "full"
    Database server.......... "psapdb"
    Database type............ "ORACLE"
    Database name............ "BWP"
    Database owner........... "SAPBWP"
    Character set............ "C"
    SAP kernel............... "640"
    Created on............... "Oct 29 2006 20:49:57"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
    Patch level.............. "155"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
    SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 24576
MM Used.................. 6604384
MM Free.................. 1772536
SAP Release.............. "640"
User and Transaction
    Client.............. 200
    User................ "R3REMOTE"
    Language key........ "E"
    Transaction......... " "
    Program............. "SAPLRSSM_PROCESS"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
     "CHECK_IF_ANALYZE_IS_NESSESSARY".
    The main program was "RSPROCESS ".
    The termination occurred in line 1143 of the source code of the (Include)
     program "LRSSM_PROCESSF04"
    of the source code of program "LRSSM_PROCESSF04" (when calling the editor
     11430).
    The program "SAPLRSSM_PROCESS" was started as a background job.
    Job name........ "BI_PROCESS_ODSACTIVAT"
    Job initiator... "RPRIYANKA"
    Job number...... 02010102
Also we have a failed job here. Here is the job log.
Job log overview for job:    BI_PROCESS_ODSACTIVAT / 02010102
Date       Time     Message text
08.01.2008 13:01:00 Job started
08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
08.01.2008 13:01:02 STATISTICS
08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
08.01.2008 13:01:05     SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
08.01.2008 13:01:08 Job cancelled
Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
Please help.

The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
So, adding more space to the filesystem solved the problem.
Thanks to everyone who have shown interest in solving my problem.

Error while activating data from new table of DSO to active table

HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHY

Hi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM

System Throws short dump while executing data source 2LIS_11_VASCL in RSA3.

Hello Experts,
I got short dump while executing data source 2LIS_11_VASCL in RSA3.
The details are as follow.
When importing object "MC11VA0SCL_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 567.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
I have checked source and target fields and those are of same length and data type.
Could you please give some points why this short dump occurs.
Thanks
Konda Reddy

Hi,
This error is not between BI and R/3. It is within R/3. You may have setup data and then modified the datasource.
Delete setup data, generate your datasource again. Setup data and try again.
If you are on a live system with data setup after a downtime and you do not want to delete it, then bring your datasource to the original state when you setup data and pull data.
Cheers....

Error while deleting data source : Message RSO414

Hello Guys,
We have activated data source 2LIS_04_PKKANBAN and entire standard BI content . When i tried to extract data, i got 0 records initially and after that i came to know that some functions needs to be activated in ECC to extract KANBAN data.
We activated some function and deleted & filled setup tables for KANBAN and i can see data in RSA3 (368 Records). Then i tried to extract data into SAP BI. it took me 20 minutes but ended with error. "Data Source needs to be activated again as it was changed (We just activated one function only) nothing changed to data source" I activated data source again in ECC and replicate on SAP BI side but i am not able to get it in activated mode.
I tried to activate it manually and it takes 20-25 minutes but i am not able to activate it and getting error "Error when activating DataSource : MESSAGE NO RSO414 " "Error when resetting DataSource 2LIS_04_PKKANBAN to the active version". i also can't delete data source as when i try to delete it, i get the error "ERROR WHEN DELETING DATA SOURCE : MESSAGE NO RSO414" . What to do in this situation ?
Regards,
Komik Shah

Hi Rahul,
I tried it but it didn't help me.
Also there is no FM in SAP BI called RS_DATASOURCE_ACTIVATE_ALL. I have activated data source in my ERP system and replicated same on BI side as we don't have standard Transfer Rules or Transformation, i can't use RS_TRANSTRU_ACTIVATE_ALL .
Regards,
Komik Shah

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

Table for List of Active Data Sources

Hello All,
I have a requirement like, to collect List of Active Data Sources from which extractions are happening for the past one year.
Actually i have many Data sources which are in Active State but extractions are happening only on some of the Active Data Sources.
I can collect List of Active Data Sources from Table RSOLTPSOURCE, but how to collect Active Data Sources from which extractions are happening for the past one year.
Is there any such table which satisfies my requirement?
Thanks in Advance!!

Hi Srikanth,
I had similar kind of requirement in my project and I used following approach,
1) We already had a list of all the process chains which extract data from source system. So you also need to get such list if you don't have then goto RSPCLOGCHAIN and get the list of all the active chains.
2)after that goto table RSPCCHAIN and for all of your chains or for a single chain you can put the TYPE as "loading" and you will get list of all the infopackage.
3) Once you get the list of all the infopackages which are loading data from your source system.
4) goto table RSLDPIO and put all your infopackage name and source system you will get the list of all the datasources in OLTPSOURCE field.
Regards,
Durgesh.

Getting Dump while Mapping data source.

Hi Expert,
Am getting below DUMP while trying to map data source in SEGW transaction.
Could you please suggest what could be possible cause for this?
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           CL_SADL_GW_UI_ALV_SADL_MAPPINGCP
Application Component BC-ESI-ESF-GW
Date and Time          28.07.2014 18:30:59
Short Text
     Syntax error in program "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP        ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_SADL_GW_UI_PLUG============CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
     In include "CL_SADL_GW_UI_ALV_SADL_MAPPINGCM005     ", in line 14 of program
      "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP        ", the following syntax errors
     have occurred:
Thanks & Regards,
Girdhari

Thanks Jasmin for the reply.
Yes.. Am following the E2E guide.
I tried by opening another external window by executing ok-code osegw but still getting same dump.
Below is the complete dump info.
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           CL_SADL_GW_UI_ALV_SADL_MAPPINGCP
Application Component BC-ESI-ESF-GW
Date and Time          29.07.2014 15:44:03
|Short Text                                                                                        |
|    Syntax error in program "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP        ".                           |
|What happened?                                                                                    |
|    Error in the ABAP Application Program                                                         |
|                                                                                                  |
|    The current ABAP program "CL_SADL_GW_UI_PLUG============CP" had to be                         |
|     terminated because it has                                                                    |
|    come across a statement that unfortunately cannot be executed.                                |
|    In include "CL_SADL_GW_UI_ALV_SADL_MAPPINGCM005     ", in line 14 of program                  |
|     "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP        ", the following syntax errors                      |
|    have occurred:                                                                                |
|    "CS_TABLE_LAYOUT" is not type-compatible with formal parameter "CS_TAB                        |
|    LE_LAYOUT".                                                                                   |
|                                                                                                  |
|                                                                                                  |
|                                                                                                  |
|    Author and last person to change the include are:                                             |
|    Author         SAP                                                                            |
|    Last changed by "SAP         "                                                                |
|Error analysis                                                                                    |
|    The following syntax error has occurred in program                                            |
|     CL_SADL_GW_UI_ALV_SADL_MAPPINGCP        :                                                    |
|    "CS_TABLE_LAYOUT" is not type-compatible with formal parameter "CS_TAB                        |
|    LE_LAYOUT".                                                                                   |
|                                                                                                  |
|    " "                                                                                           |
|Trigger Location of Runtime Error                                                                 |
|    Program                                 CL_SADL_GW_UI_PLUG============CP                      |
|    Include                                 CL_SADL_GW_UI_PLUG============CM002                   |
|    Row                                     11                                                    |
|    Module Type                             (METHOD)                                              |
|    Module Name                             /IWBEP/IF_SBUI_PLUGIN~CREATE_VIEW                     |
|Source Code Extract                                                                               |
|Line |SourceCde                                                                                   |
|    1| METHOD /iwbep/if_sbui_plugin~create_view.                                                 |
|    2|    CASE iv_name.                                                                           |
|    3|      WHEN if_sadl_gw_ui_c=>gc_dialog-mapping_container. " custom container for the ALV Grid|
|    4|        CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_map_ds_sadl_c                              |
|    5|          EXPORTING                                                                         |
|    6|            io_controller = io_controller                                                   |
|    7|            iv_plugin     = if_sadl_gw_ui_c=>gc_ui_plugin                                   |
|    8|            iv_name       = iv_name.                                                        |
|    9|                                                                                            |
|   10|      WHEN if_sadl_gw_ui_c=>gc_dialog-entity_set_prop_map_alv_grid. " ALV GRID mapping table|
|>>>>>|        CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_alv_sadl_mapping                           |
|   12|          EXPORTING                                                                         |
|   13|            io_controller = io_controller                                                   |
|   14|            iv_plugin     = if_sadl_gw_ui_c=>gc_ui_plugin                                   |
|   15|            iv_name       = iv_name.                                                        |
|   16|                                                                                            |
|   17|      WHEN if_sadl_gw_ui_c=>gc_dialog-entity_set_assoc_map_alv_grid. " ALV GRID mapping tabl|
|   18|        CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_alv_map_assoc                              |
|   19|          EXPORTING                                                                         |
|   20|            io_controller = io_controller                                                   |
|   21|            iv_plugin     = if_sadl_gw_ui_c=>gc_ui_plugin                                   |
|   22|            iv_name       = iv_name.                                                        |
|   23|                                                                                            |
|   24|      WHEN if_sadl_gw_ui_c=>gc_dialog-data_source_tree. " SADL entity ALV tree              |
|   25|        CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_tree_ds_sadl_c                             |
|   26|          EXPORTING                                                                         |
|   27|            io_controller = io_controller                                                   |
|   28|            iv_plugin     = if_sadl_gw_ui_c=>gc_ui_plugin                                   |
|   29|            iv_name       = iv_name.                                                        |
|   30|    ENDCASE.                                                                                |
|Active Calls/Events                                                                               |
|No.   Ty.          Program                             Include                             Line   |
|      Name                                                                                        |
|   23 METHOD       CL_SADL_GW_UI_PLUG============CP    CL_SADL_GW_UI_PLUG============CM002    11 |
|      CL_SADL_GW_UI_PLUG=>/IWBEP/IF_SBUI_PLUGIN~CREATE_VIEW                                       |
|   22 METHOD       /IWBEP/CL_SBUI_SETUP==========CP    /IWBEP/CL_SBUI_SETUP==========CM00E     7 |
|      /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_COMPONENT_VIEW                    |
|   21 METHOD       /IWBEP/CL_SBUI_VIEW_COMPOSITE=CP    /IWBEP/CL_SBUI_VIEW_COMPOSITE=CM004     6 |
|      /IWBEP/CL_SBUI_VIEW_COMPOSITE=>CREATE_COMPONENT_VIEW                                        |
|   20 METHOD       CL_SADL_GW_UI_MAP_DS_SADL_C===CP    CL_SADL_GW_UI_MAP_DS_SADL_C===CM00B     2 |
|      CL_SADL_GW_UI_MAP_DS_SADL_C=>_ADD_COMPONENT_VIEW                                            |
|   19 METHOD       CL_SADL_GW_UI_MAP_DS_SADL_C===CP    CL_SADL_GW_UI_MAP_DS_SADL_C===CM008    11 |
|      CL_SADL_GW_UI_MAP_DS_SADL_C=>DO_SETUP_INSTANCE                                              |
|   18 METHOD       /IWBEP/CL_SBUI_VIEW===========CP    /IWBEP/CL_SBUI_VIEW===========CM003    58 |
|      /IWBEP/CL_SBUI_VIEW=>/IWBEP/IF_SBUI_COMMAND_HANDLER~EXECUTE_COMMAND                         |
|   17 METHOD       /IWBEP/CL_SBUI_SETUP==========CP    /IWBEP/CL_SBUI_SETUP==========CM00E    12 |
|      /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_COMPONENT_VIEW                    |
|   16 METHOD       /IWBEP/CL_SBUI_SETUP==========CP    /IWBEP/CL_SBUI_SETUP==========CM00I    17 |
|      /IWBEP/CL_SBUI_SETUP=>CREATE_FRAMESET_EDITOR                                                |
|   15 METHOD       /IWBEP/CL_SBUI_SETUP==========CP    /IWBEP/CL_SBUI_SETUP==========CM00G    59 |
|      /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_ELEMENT_EDITOR                    |
|   14 METHOD       /IWBEP/CL_SBUI_CONTROLLER=====CP    /IWBEP/CL_SBUI_CONTROLLER=====CM015    22 |
|      /IWBEP/CL_SBUI_CONTROLLER=>GET_ASSIGNED_EDIT_TOOL                                           |
|   13 METHOD       /IWBEP/CL_SBUI_CONTROLLER=====CP    /IWBEP/CL_SBUI_CONTROLLER=====CM00A    33 |
|      /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_CONTROLLER~ON_NAVIGATION_REQUESTED                |
|   12 METHOD       /IWBEP/CL_SBUI_DP_CMD_CREA_MA=CP    /IWBEP/CL_SBUI_DP_CMD_CREA_MA=CM001    53 |
|      /IWBEP/CL_SBUI_DP_CMD_CREA_MA=>DO_EXECUTE_COMMAND                                           |
|   11 METHOD       /IWBEP/CL_SBUI_COMMAND========CP    /IWBEP/CL_SBUI_COMMAND========CM002     4 |
|      /IWBEP/CL_SBUI_COMMAND=>/IWBEP/IF_SBUI_COMMAND_HANDLER~EXECUTE_COMMAND                      |
|   10 METHOD       /IWBEP/CL_SBUI_CONTROLLER=====CP    /IWBEP/CL_SBUI_CONTROLLER=====CM00E     9 |
|      /IWBEP/CL_SBUI_CONTROLLER=>HANDLE_COMMAND_OF_PLUGIN                                         |
|    9 METHOD       /IWBEP/CL_SBUI_CONTROLLER=====CP    /IWBEP/CL_SBUI_CONTROLLER=====CM00Y    97 |
|      /IWBEP/CL_SBUI_CONTROLLER=>HANDLE_COMMAND                                                   |
|    8 METHOD       /IWBEP/CL_SBUI_CONTROLLER=====CP    /IWBEP/CL_SBUI_CONTROLLER=====CM00C   138 |
|      /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_CONTROLLER~ON_COMMAND_REQUESTED                   |
|    7 METHOD       /IWBEP/CL_SBUI_SCREEN=========CP    /IWBEP/CL_SBUI_SCREEN=========CM001    18 |
|      /IWBEP/CL_SBUI_SCREEN=>ON_PAI_COMMAND                                                       |
|    6 MODULE (PAI) /IWBEP/SAPLFG_SBUI_SB_MAIN          /IWBEP/LFG_SBUI_SB_MAINI01             14 |
|      PAI_0100_COMMAND                                                                            |
|    5 METHOD       /IWBEP/SAPLFG_SBUI_SB_MAIN          /IWBEP/LFG_SBUI_SB_MAINCI1             34 |
|      LCL_SCREEN_0100=>DO_CALL_SCREEN                                                             |
|    4 METHOD       /IWBEP/CL_SBUI_SCREEN=========CP    /IWBEP/CL_SBUI_SCREEN=========CM003    17 |
|      /IWBEP/CL_SBUI_SCREEN=>START_SCREEN                                                         |
|    3 METHOD       /IWBEP/CL_SBUI_CONTROLLER=====CP    /IWBEP/CL_SBUI_CONTROLLER=====CM00U    50 |
|      /IWBEP/CL_SBUI_CONTROLLER=>START_SCREEN                                                     |
|    2 METHOD       /IWBEP/CL_SBUI_CONTROLLER=====CP    /IWBEP/CL_SBUI_CONTROLLER=====CM004    33 |
|      /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_SERVICE_BUILDER~START                             |
|    1 EVENT        /IWBEP/R_SBUI_SERVICE_BUILDER       /IWBEP/R_SBUI_SERVICE_BUILDER          19 |
|      START-OF-SELECTION                                                                          |
Thanks,
Girdhari

Activating data sources in r/3

hai,
when i tried to activate a data source in r/3, it says an information ."warning has occurred (see log)"with the messege number R8281,whereas other datasources are activated ....can you tell me what does it mean and how to correct it please...
Edited by: siva perumal on Jan 30, 2008 11:10 AM

Hi
You can just ignore the warnings.It will not impact on any results.
Regards'
Chama.

Error while creating data source in bi for uc connect

Hi Experts,
we have using ud connect to pull the data from ms sql server using jdbc,we have maintained all the settings in the j2ee engine and also we performed the smoke test which showed the tables content in the ms sql data base.
and also we have maintained the rfc connection between the j2ee and sap bi,and performed the test connection which excecuted great.
but while creating the data source in sap bi administration work bench(rsa1)>sourcesytem>udconnect>create
we have maintained the following parameters
rfc destination----
we have maintained the rfc destination,which we could see in sm59 for the sap bi client
logical system name----
we have mentioned a generic logical system name(here we are not sure)
type of connector----
jdbc
name of the connector------ sdk_jdbc
sourcesystemname----
it has taken the logical system name description when we enter the logical system name.
once after maintaining the setting.when we performed the check.
it showed us the error
check failed rfc connection:check destination

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

Error while activating data in DSO

Hi Gurus, While activating I am getting these 2 messages "Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER" and the other message is "Fiscal year variant K4 not expected" and in some other Data Packages I am getting "Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER"
Kindly help in this matter.

Hi,
Try these threads.
Error when activating data in 0FI_GL_04 ODS (SIDS)
Unable to activate data in DSO
Error when assigning SID : Action VAL_SID _CONVERT table
Can'T Activate ODS Data
FI error in rspc chain
Same issue as yours.
Hope this helps.
Thanks,
JituK

Warning while activating data source 0BBP_TD_CONTR_2

Similar Messages

Maybe you are looking for