Warning while trying to run an agent obiee 11g

Hello all,
I have an analysis and i have applied an agent on that analysis so that i receive an email with the report attached.
I have configured the mail settings in the em tool and i have  run it successfully in the past with other agents/analyses.
Currently when i'm running the agent, the operation ends with the following message:
"The Agent, agent-test MP, has completed with warnings."
I'm trying to see through the logs in "C:\oracle\middleware\instances\instance1\diagnostics\logs\OracleBISchedulerComponent\coreapplication_obisch1\nqscheduler.log"
what went wrong but i see nothing helpful there.
Note that the obiee version is 11.1.1.6
Does anybody have an idea how i can look further into this problem? Maybe there are logs available in another folder etc.
Thanks in advance,
Konstantina

Hello Konstantina,
Login to BIP
Open---Report Jobs History ----Status
Double Click Status you can get the error/warning message .
Paste  the warning message here.
Thanks,
Sasi Nagireddy..

Similar Messages

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I just got v10.6, while trying to run the update, it's telling me that the file is corrupt and cannot be saved. What do I do?!

    I'm running Snow Leopard v 10.6 on a Macbook 4,1. I've got a 500 GB HD and 4GB of Ram. While trying to run the software update (to get me to 10.6.8, I think?) I keep getting an error message around 600 MB that says it's unable to be saved because the file might be corrupt and that it will try again when the software update is ran next time. Why am I getting this message? Is there a way to get the update (so I can eventually get to Lion), without going through the software update screen?
    I'm going crazy with this. I've tried 4 times now and still keep getting the same message.

    Try downloading the stand alone installer here:
    http://support.apple.com/kb/DL1399
    In Safari Preferences, General tab, set "Save downloaded files to: select destop, if it is not in thed rop down select other, then selcet Desktop from the left sidebar. After the download completes click on the installer package on your desktop and follow the prompts.
    Also if possible use an ethernet conection as it is less prone to interference, thus less prone to corruption, and usually faster.
    Hope this helps

  • Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5

    imac 2.66 Ghz, Intel Core i5, OS 10.6.4.
    Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5:
    Adobe Air
    the installation of this app is damaged. Try re-installing or contacting the publisher for assistance.
    Tried several times to uninstall and reinstall from fresh download to no avail.
    I'm finding the instructions in the trouble shooting area a tad esoteric.
    Will there be an update to the installer released soon?

    Hi,
    I'm assuming your having troubles installing the 2.0.3 runtime?  If so, can you please try the instructions in this post?
    Thanks,
    Chris

  • Error while trying to run reports

    Hello,
    I am getting the following error while trying to run/launch AIX based Ora. Apps 11.5.10.2
    $ rwbld60
    Error: Object "" does not have windowed ancestor
    Does anyone know what could be causing this?
    Thanks,
    Chiru

    Hi chiru,
    it seems to be some environment problem ????Hey Mitra,
    Thank you for the reply.
    It definitely is an environment related issue(that is what I am trying to find out)
    This is occuring in our DEV environment. It works fine in TEST and PROD.
    More than likely it is due to low resources in the DEV...but I figured some one would have seen it before....and would answer my question with a definite answer.
    Thanks,
    Chiru

  • Error While trying to run a servlet

    I am getting the below error while trying to run a servlet using tomcat.In this admin is a directory where I have a html file called admin.html which calls the servlet AdminServlet & replaces the url by /servlet/AdminServlet.
    HTTP Status 404 - /SPOT/admin/servlet/AdminServlet
    type Status report
    message /SPOT/admin/servlet/AdminServlet
    description The requested resource (/SPOT/admin/servlet/AdminServlet) is not available.
    For more details I am also copying the code from the admin.html file below.
    <script language=JavaScript>
    document.location.replace('../servlet/AdminServlet');
    </script>

    JavaScript != javareplace or redirect ??

  • Error on /SafeMode: error while trying to run project uncaught exception thrown by method called

    i try run VS 2012 with /SafeMode. I create new empty Winform. When I start debug, I got:
    "error while trying to run project uncaught exception thrown by method called through reflection"

    Hi Matanya Zac，
    Did you restart your machine? How about installing the VS2012 update 4?
    >>error while trying to run project uncaught exception thrown by method
    Did you install the VS update in your VS IDE? I met this issue before which was related to the VS update:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/5ead8ee9-ea09-4060-88b0-ee2e2044ff82/error-while-trying-to-run-a-project-uncaught-exception-thrown-by-method-called-through-reflection?forum=vsdebug
    If still no help, I suggest you repair your VS, and then restart your machine, test the result.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error on Control Center while trying to run jobs

    Hi,
    I got a problem while trying to run the scheduled jobs or process flows.
    We tried restarting the control center service manually. It is started without throwing any errors at the backend. But when I open the control center service and try to start or stop a job, its throwing the below error.
    The error is as below.
    ORA-20029: The control center service is not currently available
    ORA-06512: at "OWB_REPO.WB_RTI_EXCEPTIONS", line 107
    ORA-06512: at "OWB_REPO.WB_RTI_QUEUES", line 200
    ORA-25207: enqueue failed, queue OWB_REPO.WB_RT_SERVICE_QUEUE is disabled from
    enqueueing
    ORA-06512: at "OWB_REPO.WB_RTI_SERVICE_EXECUTION", line 548
    ORA-06512: at "OWB_REPO.WB_RTI_SERVICE_EXECUTION", line 619
    ORA-06512: at "OWB_REPO.WB_RT_EXECUTION_CONTROL", line 27
    ORA-06512: at line 1
    I am not able to resolve it. Could any one of you please help me in resolving it?
    It is very urgent. Thanks a ton in advance
    Regards,
    SriGP.

    Hi Oliver,
    Thanks again!!
    There are a lot of queues in DBA_Queues.
    But how can we know which queues should be enabled and which queues should be disabled? As I observed, All the Exception queues are disabled and the reamining queues are enabled.
    About the parameter aq_tm_processes, we have not changed the value of it. Previously, all the jobs used to execute perfectly with the same setting. So, I dont think the value is a problem.
    Recently, we had the below problem in database, because of which all the jobs got stalled/hanged. The system DBA had resolved this problem by extending the SYSTEM tablespace. After that all the database is fine except the OWB jobs. Is there any impact on the on the owb jobs because of the below error?
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01653: unable to extend table SYS.AUD$ by 8192 in tablespace SYSTEM
    ORA-02002: error while writing to audit trail
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01653: unable to extend table SYS.AUD$ by 8192 in tablespace SYSTEM
    Thanks in advance,
    SriGP.

  • An exception occurred while trying to run "cmicnfg.cpl, cmCtrlwND"

    I have recently installed the MSI KT6 Delta main-board with the VIA KT600 chipset On loading windows XP home edition the following error message appears:
    RUNDLL
    An exception occurred while trying to run “cmicnfg.cpl, cmCtrlwND”
    I think the error messages is related to the on-board sound card software in the control panel, but have been unable to remove the error message. The sound card works fine.
    Cheers

    I think there is an autostart function of C-Media that you have disabled or is not working properly. Run MSCONFIG and check the autostart tab. Either you disable the C-media post or enable it. If the sound is OK I suggest you disable.
    If you just want to get rid of the message, we can dive into the Registry, but we wait a little I think.
    (Possibly Windows trying to handle the sound department since it might think it has better drivers. Find the latest for XP. Unzip or whatever, go to Device Manager and update drivers. )

  • Tomcat error while trying to run the servlet

    I am etting the below error while trying to run a servlet from tomcat server.
    HTTP Status 404 - /servlet/DailyStatusServlet
    type Status report
    message /servlet/DailyStatusServlet
    description The requested resource (/servlet/DailyStatusServlet) is not available.
    Can anyone help me in solving this error.

    rnaaz wrote:
    Can anyone help me in solving this error.Start by making sure you've properly mapped that URL in your deployment descriptor (web.xml file).
    ~

  • Getting an error msg while trying to run the java class from CMC

    Hi All,
    I am getting an error, while trying to run the java .class file, that which is imoported into CMC.
    Error msg:
    Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version number in .class file
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
         at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
         at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at com.crystaldecisions.sdk.plugin.desktop.program.internal.ProgramWrapper.main(ProgramWrapper.java:49)
    I have imported .class file into CMC and trying to invoke the .class file by another java program from eclipse..When i tried to invoke the .class in cmc, i am getting an error msg, mentioned above. I thought there might be version conflict. So i changed the java complier version to 1.5 in my Eclipse. After that is done again i am facing the same problem.
    Can anyone help me to resolve this issue?
    Thanks in Advance.

    i have installed BO SDK 3.1 , Service pack 3. It comes woth JDK 1.5 version. i have not done any chnages to it. I impoprted all the jar files related to BO into eclipse.
    1)  Actually, i am writing java code on eclipse. When i run code from the eclipse, it creates a session to cmc and creates folder structure what i need.
    2)  But the thing is, that code needs to run, when i import the .class file into cmc. The process how i imported the .class file to cmc.
    Manage> Add> Program File-->Java (Check Box). In this way i added java class file from the eclipse workspace (class file from the bin directory).
    3) So when i run the .class file externally by another java program or also when i log in to CMC and run that .class file, the instance shows sucess, but when i see the logfile i am getting an exception that which i mentioned above.
    If my method is worng can you please let me know the stepts how to run java program in cmc.
    Thanks in Advance

  • E1200 - CPU Locks Up While Trying to Run Updates

    I tried to install my new E1200 router last night, and ran into issues. Every time I try to run the installation CD, my CPU locks up while trying to run updates. Is there a way to bypass checking for updates while doing initial installation?

    If you are trying to install the Router with the help of the Cisco Connect Software and want to by pass the Router updates then there you will get an option " Update Now " or " Later "... So select " Later " then that will bypass the updates and will proceed further for the installation of the Cisco Connect....

  • VS 2010 error: 'Error while trying to run project: Not implemented'

    I added a new Oracle database project using Oracle Tools for Visual Studio 2010. Once the Oracle database project is added to my Solution, my Visual Studio is no longer able to start the debugger and at times not able to run Test Cases. It error with 'Error while trying to run project: Not implemented'. If I unload the project, VS starts working fine.
    Any idea on how to resolve this issue?

    I ran into this problem as well, working in a VS2010 solution which included an ASP.NET web project and the v11.2.0.2.1 ODT version of the Oracle project.
    Turns out that I was able to solve the problem by removing the Oracle project from the solution, and then adding it back in. From a SLN file point of view, it seems that as long as the Oracle SQL project is located after the Web Application Project that everything works fine.
    Note that the SLN file is not organized by alphabetical project name, so changing the name of the SQL project doesn't help; its organized by order of project addition to the solution, so removing and re-adding is the way to go.

  • 'Error while trying to run project: Not implemented'

    I added a new Oracle database project using Oracle Tools for Visual Studio 2010. Once the database project is added, my Visual Studio is no longer able to start the debugger. It error with 'Error while trying to run project: Not implemented'. If I unload the project, VS starts working fine.
    Any idea on how to resolve this issue?

    I ran into this problem as well, working in a VS2010 solution which included an ASP.NET web project and the v11.2.0.2.1 ODT version of the Oracle project.
    Turns out that I was able to solve the problem by removing the Oracle project from the solution, and then adding it back in. From a SLN file point of view, it seems that as long as the Oracle SQL project is located after the Web Application Project that everything works fine.
    Note that the SLN file is not organized by alphabetical project name, so changing the name of the SQL project doesn't help; its organized by order of project addition to the solution, so removing and re-adding is the way to go.

  • Explorer has Hanging while Trying to Run Forms 10g

    Hi,
    While Trying to Run Forms 10g on Windows vista (o.s) "Explorer has Hanging " ...
    Operating system : Windows vista
    Forms - 10g
    Plz Any one help...
    Thanks....
    Sa....

    Is it the problem with Vista only or in other versions of windows tooo. If the same problem occours in other IE versions then check if you have installed jinitiator.Most probably it is in case the jinitiator not installed...

Maybe you are looking for