Warnings After Uploading to Vimeo

Hi,
I receive the following warning after uploading Captivate mp4 video to Vimeo:
Just a warning…
We have some recommendations for this video:
This video's data rate is only 237 kbit/s, which is lower than what we recommend and means your video might not look as nice as it should. For HD video, we suggest you use a higher data rate, typically 5000 kbit/s. Learn more about our recommended HD settings.
This video uses a non-standard frame rate (15 FPS). This can sometimes cause problems during playback (such as the video and audio not syncing). Check out our Compression Guidelines for more information.
Vimeo support suggested I check here.
Thanks.

Looks like that worked for one of the warnings but still get this:
Just a warning…
We have some recommendations for this video:
This video's data rate is only 457 kbit/s, which is lower than what we recommend and means your video might not look as nice as it should. For HD video, we suggest you use a higher data rate, typically 5000 kbit/s. Learn more about our recommended HD settings.
Any other suggestions? Thanks again.

Similar Messages

Error message uploading to vimeo-"error", try again later"

I select upload to Vimeo for my movie and the processing begins and appears to be proceeding normally. After some time passes and the processing is completed an error message appears saying only that a error has occured and that I should try again later. Upon repeated trys the same error message appears after each attempt. There is no suggestion about how to possibly remedy the problem. Thanks for any help. Fred

Thanks again, Here's the details of the files captured by the PV 500 DVR
I'm using. I'll answer your other questions in a follow-up response.
Thanks, Fred
General
Complete name                            :
E:\MyRecord\20130808\FNLE0274_20130808201940.ASF
Format                                   : Windows Media
File size                                : 1 006 MiB
Duration                                 : 25mn 51s
Overall bit rate                         : 5 439 Kbps
Maximum Overall bit rate                 : 3 456 Kbps
Video
ID                                       : 2
Format                                   : MPEG-4 Visual
Codec ID                                 : M4S2
Codec ID/Hint                            : Microsoft
Duration                                 : 25mn 51s
Bit rate                                 : 4 703 Kbps
Width                                    : 720 pixels
Height                                   : 480 pixels
Display aspect ratio                     : 3:2
Frame rate                               : 30.144 fps
Standard                                 : NTSC
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.451
Stream size                              : 870 MiB (86%)
Audio
ID                                       : 1
Format                                   : PCM
Codec ID                                 : 1
Duration                                 : 25mn 51s
Bit rate                                 : 512 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 32.0 KHz
Bit depth                                : 8 bits
Stream size                              : 94.7 MiB (9%)

Audio out of sync. once it's uploaded to vimeo and played back looks like the old godzilla movies. PP Pro CC 2014. frame rate is correct.

Has anybody experienced major lag time on the audio once uploaded to Vimeo? Vimeo is pointing to the export. The delay clearly gets worse once it is played back from Vimeo. I am at the point of splitting video and audio on the timeline and moving the audio forward a bit at a time to see if that will solve. Feels stupid to be doing this after all the work that goes into a 45 min Doc

First of all, when you export, you should see the dialog box that has information about the source video as well as the export. If you are shooting 25fps then you are not in the USA. If you are in the USA, look harder at your export settings.
But that isn't the problem you are facing.
Are you using the Vimeo app to play the videos on the iPad or are you just playing it in a browser? Use the app if you aren't now doing so.
I doubt that you are using anything other than AAC for your audio from what you have said about using the presets, but I have to ask. You are using AAC, right? That is what Vimeo prefers.
Have you tried turning the HD off in Vimeo to see if that clears up the problem? That will probably be fine on a smartphone. An iPad might see the difference though.
You are not going to be happy reading this Vimeo.com thread, but here it is anyway.
I don't even know what to make of this one.
In any case, you will read for yourself that you may want to change browsers on the mobile device.

IMovie will not upload to Vimeo

I use iMovie to upload to YouTube all the time and it has always worked great. I noticed that the new version of iMovie has the ability also to upload to Vimeo. I have a Vimeo account so I chose the upload to Vimeo option and entered in my password, but nothing happened. IMovie didn’t give me either a progress bar or an error message. It just didn’t do anything. I checked my password to make sure it is correct. I do not understand why iMovie will not upload to Vimeo. How do I fix this?

I had the same problem. Looks like iMovie doesn't give any feedback when the login to Vimeo fails.
The most likely problem is that your "vimeo user account name" is *not* your full name (say "Marc-André Lafortune"), but your "shortcut url" (in my case "malafortune"). You can set this in vimeo by using this link: http://vimeo.com/settings/shortcut
This is what you must enter when you setup your account in iMovie. If that is correct and your password is good too, you will see a progress bar after the login is successful (2-3 seconds).
HTH
If anyone from Apple is reading this: iMovie should be fixed by
1) giving feedback when login fails
2) ideally change "user account name" for "shortcut URL" or similar, with a popup like "what is this?"
3) only accept the characters that are accepted by Vimeo for the shortcut URL (letters and numbers, no spaces, etc...)

How to delete file from column after upload with messageFileUpload?

Which is the way to delete a file from column i have uploaded with messageFileUpload. After uploading the system generates a link to download the file. But how i can delete the file?

Thank you! Syncing has always scared me...basically I am just afraid to lose any photos. But it worked. Again thank you

Swf files appearing in preview (D8) but not n browser after uploading - frustrated!

Hello,
I have worked with Flash and Dreamweaver on the side for a
number of years. We all know that after the recent changes, the way
it handles object and embed tags has changed to favor Java
actionscripts instead.
This code I am about to paste was created using Dreamweaver
8.02, with transitional (x) html. Now mind you, this is not the
prettiest piece of code you've ever seen. I now am learning to use
CSS layouts instead of layers/tables, with php and flash
integrated. This one example is not the only time I have had this
problem however.
I made a silly flash banner (its actually a placeholder for a
better one I have to develop) for testing purposes and sizing. It
appears fine in Firefox, and IE6 in the preview mode via
Dreamweaver. When I upload it all to the site, the flash banner
does not appear.
I have tried copying the FLA and SWF files to the root folder
(the fla, swf, and html files generated are all present), and tried
a number of variations in the code and parameters to no avail. The
darn thing just won't appear now. Similarly older pages I have
created that Dreamweaver now prompts you to "fix the object tag
that may not work in IE7...etc" have the same issue. If I select
"go ahead and fix them for me", they are visible in production, but
gone after uploading.
Now to remove the possibility that this was a layering or
parent tag issue of visibility, I created a blank HTML page and
"insert/media/flash" and stuck the banner in there, then uploaded
it to my server. It doesn't appear.
I need help. I have been scouring the web for a few days now
to no avail and have become quite frustrated with what used to be a
really easy integration of Flash and html.
Here is the top chunk of code from the page in question: (the
page is live with the missing banner here:
http://www.aeonsolutions.net/shirtworks/Shrtwrks_Homepage.html)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Shirtworks custom T shirts, silk screening,
inkjet printing, embroidery, event, club, sport, organization,
holiday, humor, clothing</title>
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
<style type="text/css">

</style>
<script type="text/javascript">

</script>
<link href="CSS/shirtworks.css" rel="stylesheet"
type="text/css" media="all" />
<style type="text/css">

</style>
</head>
<body
onload="MM_preloadImages('MenuText/HomePage_over.jpg','MenuText/Artwork_over.jpg','MenuTe xt/Apparel_over.jpg','MenuText/Embroidery_over.jpg','MenuText/Custom_over.jpg','MenuText/D irections_over.jpg','MenuText/AboutUs_over.jpg','MenuText/Contact_over.jpg')">
<div id="Layer5">
<table width="533" height="141" border="0">
<tr>
<td><script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0','dat a','Banner1.html','width','525','height','143','hspace','0','vspace','0','align','middle', 'border','0','title','Banner1','src','Banner1','pluginspage','http://www.macromedia.com/go /getflashplayer','scale','noborder','movie','Banner1'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
data="Banner1.html" width="525" height="143" hspace="0" vspace="0"
align="middle" border="0" title="Banner1">
<param name="movie" value="Banner1.swf" />
<param name="SCALE" value="noborder" />
<embed src="Banner1.swf" width="525" height="143"
hspace="0" vspace="0" align="middle" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash"
scale="noborder"></embed>
</object></noscript></td>
</tr>
</table>
Understanding this change is fundamental in my developing
process as a designer, and will save my sanity. I appreciate any
help.
Mike

Did you upload this folder?
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"MalikyeMoon" <[email protected]> wrote in
message
news:[email protected]...
> Hello,
>
> I have worked with Flash and Dreamweaver on the side for
a number of
> years.
> We all know that after the recent changes, the way it
handles object and
> embed
> tags has changed to favor Java actionscripts instead.
>
> This code I am about to paste was created using
Dreamweaver 8.02, with
> transitional (x) html. Now mind you, this is not the
prettiest piece of
> code
> you've ever seen. I now am learning to use CSS layouts
instead of
> layers/tables, with php and flash integrated. This one
example is not the
> only
> time I have had this problem however.
>
> I made a silly flash banner (its actually a placeholder
for a better one I
> have to develop) for testing purposes and sizing. It
appears fine in
> Firefox,
> and IE6 in the preview mode via Dreamweaver. When I
upload it all to the
> site,
> the flash banner does not appear.
>
> I have tried copying the FLA and SWF files to the root
folder (the fla,
> swf,
> and html files generated are all present), and tried a
number of
> variations in
> the code and parameters to no avail. The darn thing just
won't appear
> now.
> Similarly older pages I have created that Dreamweaver
now prompts you to
> "fix
> the object tag that may not work in IE7...etc" have the
same issue. If I
> select "go ahead and fix them for me", they are visible
in production, but
> gone
> after uploading.
>
> Now to remove the possibility that this was a layering
or parent tag issue
> of
> visibility, I created a blank HTML page and
"insert/media/flash" and stuck
> the
> banner in there, then uploaded it to my server. It
doesn't appear.
>
> I need help. I have been scouring the web for a few days
now to no avail
> and
> have become quite frustrated with what used to be a
really easy
> integration of
> Flash and html.
>
> Here is the top chunk of code from the page in question:
(the page is
> live
> with the missing banner here:
>
http://www.aeonsolutions.net/shirtworks/Shrtwrks_Homepage.html)
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>Shirtworks custom T shirts, silk screening,
inkjet printing,
> embroidery, event, club, sport, organization, holiday,
humor,
> clothing</title>
> <script src="Scripts/AC_RunActiveContent.js"
> type="text/javascript"></script>
> <style type="text/css">
> 
> </style>
> <script type="text/javascript">
> 
> </script>
> <link href="CSS/shirtworks.css" rel="stylesheet"
type="text/css"
> media="all" />
> <style type="text/css">
> 
> </style>
>
> </head>
>
> <body
>
onload="MM_preloadImages('MenuText/HomePage_over.jpg','MenuText/Artwork_over.jpg
>
','MenuText/Apparel_over.jpg','MenuText/Embroidery_over.jpg','MenuText/Custom_ov
>
er.jpg','MenuText/Directions_over.jpg','MenuText/AboutUs_over.jpg','MenuText/Con
> tact_over.jpg')">
> <div id="Layer5">
> <table width="533" height="141" border="0">
> <tr>
> <td><script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=7,0,19,0','data','Banner1.html','width','525','height','143','hspace','0
>
','vspace','0','align','middle','border','0','title','Banner1','src','Banner1','
> pluginspage','
http://www.macromedia.com/go/getflashplayer','scale','noborder','m
> ovie','Banner1' ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,19,0" data="Banner1.html" width="525"
height="143" hspace="0"
> vspace="0" align="middle" border="0" title="Banner1">
> <param name="movie" value="Banner1.swf" />
> <param name="SCALE" value="noborder" />
> <embed src="Banner1.swf" width="525" height="143"
hspace="0"
> vspace="0" align="middle"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
> type="application/x-shockwave-flash"
scale="noborder"></embed>
> </object></noscript></td>
> </tr>
> </table>
>
> Understanding this change is fundamental in my
developing process as a
> designer, and will save my sanity. I appreciate any
help.
>
> Mike
>

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day. We have several phones in our office and the ones that have updated (4) now have issue holding a charge/battery life. I really liked this phone and can not believe that you are now going to charge us $79 a battery to fix what is most definately a problem with your latest update. I know other people outside of our company that are having the same problem. Not to mention when I called AT&T it was confirmed to me that they are hearing the same issue and then some from other customers as well. Your own people, once I talked to them earlier today, told me they are showing a history of issues that are showing up after the update was put in place. Of course she tried to say, "Maybe the age of the battery and the update both contributed". Whatever.
I want you all to know how disappointed I am in your company for the handling of this issue. I always thought "Apple" was the line I didn't have to worry about having any types of issue. And that you all would stand behined your product 100%. Now I am not so sure.
I would love to hear back from your company on how you perceive the issue with all of these phones that prior to the update didn't have any issues and how after the update THEY ARE NOW having issues. I do not believe this was an issue due to the age of a battery and that was pretty lame to say so. It was fine and now its not.
Please feel free to contact me and help me figure out a way to pay for all of the batteries that will be needed for our company to contiue doing business as needed.
Thank you.
Web Address (URL):
5106 McNarney

Sorry this is a user to user technical forum. There is NO APPLE here as stated in the term of use when you signed up for this forum.
here are some battery tips
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://www.apple.com/batteries/iphone.html

How to validate the contents of excel file after uploading it.

hi Experts,
                 we have a requirement in which we need to create business transactions with the data in the excel file after it was uploaded. we are creating this transactions(BP,LEAD..) in webui -marketing professional role-external lists. what i have to do is, after uploading the data from excel file, i need to check for the mandatory fields in the data ,if anything is missing then i need to display the error message to the user. i am new to this webclinet frame work. please help me in achieving this functioanlity.any code snippet would be very helpful.
THANKS IN ADVANCE.

Hi ,
Try with the below code.
in the upload class ihn attributes declare
go_messages
level static
visibility public
Associated Type CL_CRM_GENIL_GLOBAL_MESS_CONT.
in the event for upload
lo_core     = cl_crm_bol_core=>get_instance( ).
go_messages = lo_core->get_global_message_cont( ).
go_messages->reset( ).
REFRESH : t_return.
create a function module to validate the mandatory fields.
loop at i_table
call a function module
endloop.
In function module validate the mandatory fields if empty fill a error message and append to internal table.
loop at t_return INTO st_return WITH KEY type = 'E'.
CALL METHOD go_messages->add_message
        EXPORTING
          iv_msg_type          = st_return-type
          iv_msg_id              = st_return-id
          iv_msg_number     = st_return-number
          iv_msg_v1             = st_return-message_v1
          iv_msg_v2             = st_return-message_v2
          iv_msg_v3             = st_return-message_v3
          iv_msg_v4            = st_return-message_v4
          iv_show_only_once = abap_true.
endloop.
Regards,
Gangadhar.S

Data in CSV uploads successfully, but it is not visible after upload.

Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
(     "APPID" NUMBER,
     "APPNAME" VARCHAR2(50),
     "APP_PROVIDER" VARCHAR2(50),
     "DBID" NUMBER,
     "CRITICAL" VARCHAR2(3),
     "REMARKS" VARCHAR2(255),
     "LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPDATE_BY" VARCHAR2(10),
     "SERVERID" NUMBER,
     "HOSTNAME" VARCHAR2(20),
     "IPADDRESS" VARCHAR2(16),
     "ENV_TYPE" VARCHAR2(20),
     "ENV_NUM" VARCHAR2(20),
     "ENV_NAME" VARCHAR2(50),
     "APPLICATION" VARCHAR2(50),
     "APPLICATION_COMPONENT" VARCHAR2(50),
     "NOTES" VARCHAR2(255),
     "CLSTR" VARCHAR2(20),
     "LOAD_BALANCED" VARCHAR2(20),
     "BUSINESS" VARCHAR2(255),
     "ENV_OWNER" VARCHAR2(20),
     "CONTROLLED" VARCHAR2(20),
     "SSO_ENABLED" VARCHAR2(20),
     "ADSI" VARCHAR2(20),
     "DISASTER" VARCHAR2(50),
     "INTERFACES" VARCHAR2(50),
     CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
     REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
     REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
Sharath

Hi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''.

Hallo, after upload my iPad air and my iPhone 5 to iOS 8 (and later Mac to Yosemite, version 10.10), I don't find in my iPad air and in my iPhone 5 photos I can see in iPhoto (version 9.6) on my Mac's Cloud.

hallo, after upload iPad air and iPhone 5 to iOS 8 (and few days ago Mac to Yosemite, version 10.10), I don't find in my iPad air and in my iPhone 5 photos I can see in iPhoto (version 9.6) on my Mac's Cloud. I tried to add manually from library to iCloud's streaming photo with no result. in iPhoto's events I've 940 photos, in iPhone and iPad about 450. I have in mobile devices only photos taken with iPhone. thank

There is no warning there, only a recommendation...
We recommend that you update to the latest version of iPhoto before placing your order,
On 10.6.8 you can update to 9.2.3.
You really need to rethink you're computing habits. Using a computer without a back up is like driving without a safety belt. Updating the OS and applications without one is like driving blindfolded and drunk without a safety belt...
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Unable to upload to Vimeo

I am unable to uplaod to vimeo from final cut X. I am working on a Macbook Pro.

Don't know if this will be helpful, but I generally edit in FCPX, create the quicktime movie in compressor, and then directly upload to vimeo using the vimeo upload tool. This is the only way I have had success with everything coming out correctly.
How large is your movie?

Problem in Getting Long Text After uploading LT using CREATE_TEXT in CORS

Hi Gurus,
i am uploading long text for Reason for cancellation in CORS Transaction through CREATE_TEXT.
after uploading this text by using this FM CREATE_TEXT i am seeing the long text what ever i uploaded through CREATE_TEXT , i am unable to see first 40 characters of that long text.
if anybody faced this problem earlier please guide me to resolve this problem.
Thanks & Regards
Venkata Ramesh J

Hi,
can you please check this link
Replacing the text created in create_text
Thanks
durga.K

After uploading file in BLOB using webutil file on system locked?

I uploaded file in BLOB using webutil upload utility. But after uploading it locks the file and i cannot delete the file unless i close the iexplorer window.
Is there any way to unlock the file and delete it with out closing the application(iexplorer). If any body knows please reply.
Regards,
Muhammad Qazzafi

can you post the statements, which you use for the upload ?
thx
Gerd

SWF not working properly after upload

I have a Flash gallery that works locally but not after upload. I added several photos to the xml file and only the original 8 jpgs are displayed.
http://federalhomecompany.com/bricktest/fireplaces.swf
Here is the html file... http://federalhomecompany.com/bricktest/federSB_portfolio_residential_fireplaces.html
Can someone tell me what would cause this? Thanks in advance

Thanks kglad!!!!
I actually did upload the pics but the extensions were upper case - all is well now thanks to you pointing me in the right direction
Happy New Year!!!

Iphoto will not work after uploading yosemite

After uploading the Yosemite upgrade. The iPhoto will not work. I have done what the software recommends. I have deleted the app and reloaded it. I get the same message. The message that i get is:
your photo library is either in use by another application or has become unreadable.
shut down and restart your computer and then open iPhoto again. if the problem persists. try rebuilding your photo library. to do this quit iPhoto, and then reopen it while keeping the option and command keys pressed. you can also try restoring your photo library from a backup.
Any suggestions or help would be greatly appreciated.
Matt

Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Warnings After Uploading to Vimeo

Similar Messages

Maybe you are looking for