Warnings while activating the smartform

Hi All,
iam trying to display data in a form. the data is present in the internal table of the driver program.
i declared an internal table with the same structure as that of the internal table of the driver program in the TABLES paramaeter of the form interface.
i declared a work area in the GLOBAL DATA of the GLOBAL DEFINITIONS tab. i have declared the necessary types in the TYPES tab of the global definition.
i have looped the internal table using the LOOP command using the internal table declared in the tables tab and work area declared in the global definitions tab.
when i activate the form it is showing warning messages that "THE WORKAREA IS NOT HAVING DEFINED VALUES".
may i know what might be the reason for this warning.
Thanks,
BJR.

you usually get warnings when you activate the form.Normally they are of unsused one and variables which dont have some constant value.
Is your smartform working fine..?
Nabheet

Similar Messages

  • Error while activating the data source.

    Dear all,
    We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
    0PM_OM_OPA_2 the following error is displayed.
    "No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
    Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
    "You can only edit 3.x DataSources using transfer rule
    maintenance Do you want to create the transfer rules now?"
    What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
    Valid experts comment is expected in this regard.
    Regards,
    M.M

    Hi Magesh,
    Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
    Hope it helps..

  • Error while activating the request of DSO upload

    Hi all,
    While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
    'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
    Is it because no translation exists,if so what should be done for the same.
    Thanks in advance,
    Chintu.

    hi Chintu,
    it seems unit BBL not exist in your bw system,
    you can update the unit master from r/3,
    have you performed 'transfer global setting' ?
    check in r/3 table t006a (t006*), if exist you can
    rsa1->source system->right click r/3 source system
    'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
    this update should be scheduled periodic, menu program->run in background and schedule periodic job.
    if BBL not exist in r/3, you can manualy maintain,
    transaction CUNI.
    hope this helps.

  • Error while activating the transformation for cube

    Hi everyone,
    I m working on BI7, & while activating the transformations the system trrows an error saying that 'amount infoobject is not assained' and  'unit of measure is not used' even though I hav assigned  both the fields to Amount infoobject.
    would plz explain in detail.
    Thank you.

    Hi,
    Are you loading from the Flat File or from ECC?
    If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
    Then when you create the Transformation then the Rules will be created Automatically.
    Regards,
    rik

  • Error While Activating the Data Source in RSA5 T-Code

    Hi,
    When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
    So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
    I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
    Or Is this issue related to Basis People?.
    Regards,
    Kumar.

    Hi Ravi,
    1.When i tried to inactive the data source  in  LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
    2. In RSA5 T-Code  while activating the data source the error is  "Event with errors Extract in Data Source 2LIS_11_VAHDR".
    Regards,
    Kumar.

  • Error while activating the copy of the standard module

    Hi,
    I wanted to create a copy of the module material_read_all and so I copied the entire function group.
    Now when I am trying to activate it , I am getting syntax error saying that the field does not exist in the global declarations. When I double click on the field name it takes me to another modules of the same function group where the said field is an export parameter.
    I cross checked with the standard module and there also no explicit declaration is given. I also tried declaraing the variable again and then activating.But on doing it I got different results from both the modules for the same input and so I had to delete and create it again.
    The same thing is happening with other modules also which I am trying to copy.
    Can anyone please help me with this.
    For copying the function group I entered the main program name in se38 and clicked on copy. It then asked me to copy the modules so I just added 'Z' before the modules to make a duplicate copy.
    It is very very urgent.
    Thanks in advance
    Edited by: Alvaro Tejada Galindo on Apr 28, 2008 11:50 AM

    Hi,
    I have tried activating all the includes individually and then the main program. But still I am getting the errors. While activating the includes on checking for the syntax error it showed error but on clicking on activating it got activated. But same thing sis not working for the main program.
    I also tried with 'activate anyway' but even after that syntax errors are there with the field decalrations.

  • Error while activating the infoobject 0MATERIAL

    Hi Experts,
    Iam trying to activate 0MATERIAL infoobject.
    But while activating the particular infoobject iam getting few errors saying that
    InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIAL
    InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BD) of characteristic 0MATERIAL
    Please help me out in activation of the infoobject.
    Thanks in Advance
    ARUN

    Hi,
    The object has been used in the Material classification Data source as well(1CL_OMAT001_BB) as per ur thread....
    In this case.. u need to make sure that the mapping to this object at the transfer rules are maintained properly or not.. if not try to maintain this object mapping properly in Tranfer rules and check the object is been used in the 0Material as well....
    Activate the Infosource once u does these changes.. and check 0Material gets activated properly or not..
    Also use use this program for activating ur object:
    RSDG_IOBJ_ACTIVATE
    thanks
    Assign points if this helps

  • Error while activating the ODS

    Dear Experts,
    Please help me out,
    I am facing one problem while activating the ODS of 0FIGL. Data is uploaded successfully into the ODS but while activeting the ODS, it gives the following error message :
    Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
    Value 'SWITCH 24 PORT MANAGED -I' (hex. '00530057004900540043004800200032003400200050004F00') of characteristic 0DOC_HD_TXT
    SID determination finished for InfoObject 0DOC_HD_TXT
    I have also read out all the related post & also applied them in this but still the position is same.
    also in RSKC, all the characters are allowed.
    please suggest.
    Thanks in advance
    Neha
    Process 000090 returned with errors

    Hi,
    Pliz go thru below article for restricting Invalid chars.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
    It might give u an idea or solve your issue.
    Thanks,
    Jitender.

  • Error while activating the ods ( prod.issue)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    <b>Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.</b>
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi Rakesh
    The error message
    "Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
    Please check your ODS settings, if 'Unique Data Records' is checked or not.
    Sorry for my late response!
    Regards
    GSK

  • Error while activating the ODS (high priority ticket)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi,
    ODS activation error
    Re: ODS Activation Failed with Status 5
    ODS activation is failing with  incorrect with status 5 erro
    Re: Error Activating the ODS data
    ODS Activation error
    Regards,
    San!

  • ERROR WHILE ACTIVATING THE DATASOURCE

    Hi Experts,
    I'M WORKING ON BW3.0B.I'M GETTING  ERROR WHILE ACTIVATING THE DATASOURCE
    1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

    Hi,
    where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
    Thanks
    Reddy

  • Error while Activating the Standard DSO

    Hi,
    I am getting the below error while Activating the Standard DSO.
    Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
    I tried searching the forum , but didnt find any answer.
    Any suggestions are welcome.
    Thank you,
    Adhvi.

    Hi,
       Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
      If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
    You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
    Thanks,
    Divya.

  • Error in transfer structure while activating the business content

    Hi all
            we got the following error while activating the transfer rules( business content) :
    1)error when determining a number from object BI_TSDTEL and number 01
    2) object name can only contain characters from syntactical character set.
    3) data element for infoobject WAERS 0CURRENCY could not be created.
    can anyone please explain what is this error.

    Hello Tilak,  
    Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
    If the above doesn't fix then try the below
    Goto SE14 -> Transfer Structure Name -> Adjust and activate .
    This will fix if there is any inconsistency in the transfer structure.
    [Thanks|http://chandranonline.blogspot.com/]
    [Chandran|http://chandranonline.blogspot.com/]

  • ERROR while activating the Business Content of Sales Cube 0SD_C03

    Hi,
    iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
    Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
    Thanks,
    Prabhakar.

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Error while activating the function module

    hi,
    am getting error while activating the function module i.e. program or report statement is missing.
    thank you in advance
    karthik

    hii vinu,
    hi there....
    make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting  a program call the function module and test it
    I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
    or
    Its common prob with Function module.
    Goto SE80->Give Function group name->Right click on it->Activate.
    regards,
    Shweta

Maybe you are looking for