WARNUNG: No PPR-capable id found for elements of CoreMessages
Hi!
I'm getting this warning:
WARNUNG: No PPR-capable id found for elements of CoreMessages[MessagesFacesBean, id=_id21]
its occuring at this tag
<af:messages />
if have tried to give the tag an specified id.. but then i still get this warning (instead of id=_id21 i get id=<given id>)
can somebody, please tell me what this warning mean, and how to remove it?
thanks, christoph
Hi,
are you on 10.1.3.x ?
Frank
Similar Messages
-
KB15N_No adjustment account found for cost element Message no. K5112
When I am trying to post Manual Cost Allocation through TC KB15N with the following input data I am getting the following error message and the same could not be posted. Kindly advise.
Screen Variant used: 01 SAP Cost Center
Input Type: List Entry
Item No.1
Sender Cost Center : 3402100942
Cost Element: 6200001
Amount : 62,201.56
Receiving Cost Center: 3405100945
First four digits represent profit center code. If first four digits are equal the above error is not coming. But posting is needed with different profit centers.
No adjustment account found for cost element
Message no. K5112
Diagnosis
Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
System Response
No adjustment account could be determined for cost element in company code SCCL.
Procedure
Maintain the standard or enhanced account determination for transaction KAMV. Information on maintenance can be found in the program documentation.
ExecuteHi all,
I face the issue like this but with transaction KOAP - Plan settlement
But, the problem is that, I do not active reconciliation ledger, so I do not maintain any thing relate to reconciation ledger or adjustment posting? I can do transaction "actual settlement" without error
So, How this error come to me?
And how I can fix it?
Thanks all! -
No Adjustment account found for cost element
Dear Gurus,
I am getting Three errors msg "No Adjustment account found for cost element" when i try to run the conformation of production order create ( T Code : C015 )" and I am not able to save the record . like
1 ).No adjustment account found for cost element
Message no. K5112
Diagnosis
Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
System Response
No adjustment account could be determined for cost element in company code XXXX
Procedure
Maintain the standard or enhanced account determination. Information on maintenance can be found in the program documentation.
Execute
2) . No adjustment account found for cost element XXXXXXXX
Message no. K5112
Diagnosis
Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
System Response
No adjustment account could be determined for cost element XXXXXXX in company code XXXX.
Procedure
Maintain the standard or enhanced account determination. Information on maintenance can be found in the program documentation.
Execute
3 ) No account is specified in item 0000000002
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000002" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000002" of the FI/CO document.
Could anyone please help me with this.
Regards
SAP COHi,
iam not able to understand of this SAP Notes: 531606 and 1027645
Could you pl give me full details for come out this problem.
Regards
SAP CO -
No method found for XML query element
Hi,
I have an EJB module which contains some entity beans.
If I try to deploy it or verify it using the Sun One Verifier Tool I get the following exception...
Error: ** Error trying to process file: java.lang.RuntimeException: No method found for XML query element: Ambiguous or invalid <query-method>
java.lang.RuntimeException: No method found for XML query element: Ambiguous or invalid <query-method>
at com.sun.enterprise.deployment.xml.EjbNode.parseQueries(EjbNode.java:700)
at com.sun.enterprise.deployment.xml.EjbNode.completeLoadingDescriptor(EjbNode.java:671)
at com.sun.enterprise.deployment.xml.EjbBundleNode.completeLoadingDescriptor(EjbBundleNode.java:524)
at com.iplanet.ias.deployment.EjbBundleXmlReader.load(EjbBundleXmlReader.java:249)
at com.iplanet.ias.deployment.EjbBundleXmlReader.loadStdAloneModule(EjbBundleXmlReader.java:162)
at com.sun.enterprise.tools.verifier.Verifier.openEjbJar(Verifier.java:2421)
at com.sun.enterprise.tools.verifier.Verifier.loadEjbJar(Verifier.java:1318)
at com.sun.enterprise.tools.verifier.Verifier.loadJar(Verifier.java:866)
at com.sun.enterprise.tools.verifier.gui.MainPanel.run(MainPanel.java:187)
at java.lang.Thread.run(Thread.java:536)
Look in file "EntityBeans.jar_verified.xml" for detailed results on test assertions.
This problem can be resolved by un-installing the IDE, removing my user directory, and re-installing the IDE (I am using SunOne Studio 5 SE Update 1). The problem is that it returns with alarming regularity.
Anyone else experiencing this? Any help would be much appreciated.Sometimes, but not always, this exception appears in the ide.log before the error first occurs.
com.sun.forte4j.j2ee.packaging.PackagingIOException: package/EntityBeans.ejbjar
at com.sun.forte4j.j2ee.packaging.PackagingUtil.writeJarFile(PackagingUtil.java:403)
at com.sun.forte4j.j2ee.packaging.PackagingUtil.writeJarFile(PackagingUtil.java:67)
at com.sun.forte4j.j2ee.ejbmodule.EJBModuleDataObject.writeEJBJar(EJBModuleDataObject.java:2673)
at com.iplanet.ias.tools.forte.verifier.VerifierAction.performAction(VerifierAction.java:63)
at org.openide.util.actions.NodeAction$DelegateAction.actionPerformed(NodeAction.java:431)
at org.netbeans.core.ModuleActions$1.run(ModuleActions.java:97)
at org.openide.util.Task.run(Task.java:136)
at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:328)
at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:670) -
How to display no data found for two different elements
i wanted to display report either by dept wise or supplier wise
so when I dont have deptno related data
It should say no data found
for that I'm using if condition
same for supplier too
instead of giving twice can I give it in the same if condition
if so howUse logical operator 'or'
like <?if:not(DEPT_GRP) or not(SUPPLIER_GRP)?>No data Found<?end if?> -
XML File not Found for the Container BC4J.cpx
Hi,
Have following error when I start a BC4J-JSP/Struts application (with Embedded and standalone OC4J) :
500 Internal Server Error
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container BC4J.cpx
oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition(java.lang.String)
DefinitionManager.java:751
oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition()
DefinitionManager.java:793
void oracle.jbo.mom.DefinitionManager.initManager()
DefinitionManager.java:137
void oracle.jbo.uicli.mom.JUMetaObjectManager.<init>()
JUMetaObjectManager.java:57
oracle.jbo.uicli.mom.JUMetaObjectManager oracle.jbo.uicli.mom.JUMetaObjectManager.getJUMom()
JUMetaObjectManager.java:131
oracle.jbo.common.ampool.SessionCookie oracle.jbo.http.HttpContainer.findSessionCookie(javax.servlet.http.HttpSession, java.lang.String, java.lang.String, java.util.Properties)
HttpContainer.java:541
boolean oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(oracle.jbo.html.struts11.BC4JActionMapping, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
BC4JRequestProcessor.java:222
org.apache.struts.action.ActionMapping oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
BC4JRequestProcessor.java:124
void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
RequestProcessor.java:234
void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
ActionServlet.java:1292
void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
ActionServlet.java:492
void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
HttpServlet.java:740
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
HttpServlet.java:853
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
ServletRequestDispatcher.java:721
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
ServletRequestDispatcher.java:306
boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
HttpRequestHandler.java:767
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
HttpRequestHandler.java:259
void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
HttpRequestHandler.java:106
void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
PooledExecutor.java:803
void java.lang.Thread.run()
Thread.java:484
Then I make a Reload and it's ok.
I have a Workspace with two Projects :
BC4J.jpr for Businnes Components
Web.jpr for JSP Struts
In /classes I have the file Web.cpx, but no BC4J.cpx.
From which does this name come ? Can I change this name ?
Thanks
YvesI found this on Metalink...
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
The following is from Note 137429.1. Hope this helps.
Raja.
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
Action: 1. Make sure that the file is present. In particular, if the file is to be found in a zip/jar file, make sure that the Zip/JAR file is included in the CLASSPATH.
2. This error is also reported if the name of the XML file does not match the object Name specified in the XML file. If the file system support case insensitive file names (e.g., Windows NT), make sure that the file name matches the object Name in the XML file in case-sensitive fashion.
3. For a .JPX file, this error is reported if the JPX file is missing the JboProject XML tag. Check the JPX file to make sure that the valid tag is in there.
4. One XML file may be extending another XML file (specified by the Extends element in this XML file). This error is reported if the base XML file is not found.
5. When loading the XML file for a package (JboPackage tag), this error is reported if some unexpected error occurs while loading a containee.
In all of the above cases, a more descriptive message may be printed on Diagnostic. If you are not seeing Diagnostic messages, you can run your application with Diagnostic turned on, as in "java -Djbo.debugoutput=console ...", to see Diagnostic messages. -
How can I buy more storage for Elements?
Looking how to upgrade storage for my Photoshop Elements account. Every time I click on upgrade I'm taken to my products page and can't do anything from there as there are no active links to upgrade, buy more storage. I keep looping from the control panel for Elements to my account dashboard.
Your current Adobe® Photoshop® Elements or Adobe Premiere® Elements storage and sharing membership on Photoshop.com will move to a new service called Adobe Revel. More discussion around the same can be found here http://feedback.photoshop.com/photoshop_family/topics/other_adobe_photo_organizational_sof tware
-
No reference found in element, incorrect attachment reference
Hi All,
I am getting this error. While invoking a webservice.
That web service require me to send using SOAP with Attachments .
the element is declared like this in wsdl
<xsd:element name="doc" nillable="true" type="xsd:base64Binary"/>
I am using
<from expression="bpws:getVariableData('ReadPriceFeed_Read_InputVariable','AmazonEnvelope')"/>
<to variable="InvokeAmazon_postDocument_InputVariable" part="doc" query="/ns3:doc"/>
this command to assin data.
but getting No reference found in element, incorrect attachment reference error.
Please help me.
Thanks,
Varun
[2006/09/14 19:10:33] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
<remoteFault>
<part name="code" >
<code>Server</code>
</part>
<part name="summary" >
<summary>when invoking endpointAddress 'http://merchant-api-qa.amazon.com:80/gateway/merchant-interface-mime', No reference found in element, incorrect attachment reference</summary>
</part>
<part name="detail" >
<detail>AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server faultSubcode: faultString: No reference found in element, incorrect attachment reference faultActor: faultNode: faultDetail: {WASP_ExceptionNs}ExceptionTypeName:WASP_DeserializationException {WASP_ExceptionNs}ExceptionMessage:No reference found in element, incorrect attachment reference {WASP_ExceptionNs}ExceptionStackTrace: thrown in 'bool WASP_MessageAttachmentResolver::resolve(WASP_XMLTokenizer *, WASP_String *, WASP_String *&, WASP_String *&, WASP_String *&, WASP_String *&, WASP_DeserializationContext *, WASP_ExceptionEnv *)' at serialization/helpers/MessageAttachmentHelpers.cpp:119 caught in 'void WASP_DeserializationContextImpl::deserialize(void *, void (*)(void *, void *), WASP_XMLTokenizer *, WASP_String *, WASP_String *, WASP_String *, WASP_String *, bool, WASP_ExceptionEnv *)' at serialization/DeserializationContextImpl.cpp:573 rethrown in 'void WASP_DeserializationContextImpl::deserialize(void *, void (*)(void *, void *), WASP_XMLTokenizer *, WASP_String *, WASP_String *, WASP_String *, WASP_String *, bool, WASP_ExceptionEnv *)' at serialization/DeserializationContextImpl.cpp:573 caught in 'void MIME::_WASP_MerchantInterfaceInstanceMethods::postDocument(MIME::MerchantInterfaceImpl *, WASP_MessageAttachmentManager *, WASP_DeserializationContext *, WASP_SerializationContext *)' at /opt/brazil-pkg-cache/packages/MerchantGatewayServer/MerchantGatewayServer-1.1.14.8/X86_LINUX_GCC2_GLIBC22/src/waspcServer/merchantInterfaceMIMEImpl.cpp:1161 thrown in 'static void MIME::_WASP_MerchantInterfaceInstanceMethods::_WASP_postDocumentCallback(WASP_CallContext *, void *, WASP_Exception *, WASP_ExceptionEnv *)' at /opt/brazil-pkg-cache/packages/MerchantGatewayServer/MerchantGatewayServer-1.1.14.8/X86_LINUX_GCC2_GLIBC22/src/waspcServer/merchantInterfaceMIMEImpl.cpp:1179 caught in 'void WASP_CallContext::callResponseCallbacks(WASP_Exception *)' at runtime/CallContext.cpp:184 </detail>
</part>
</remoteFault>Hello,
have you found any solution for this problem?
Ich have the very same problem and i can't resolve it the last 3 days an i'am hopeless.
Many thx. -
No Receiver agreement found for Sender
Hello,
I have a scenario like this : sending an IDoc from R/3 4.6c to R/3 4.7 through XI 3.0.
I am struck up with the follwoing Error in SXMB_MONI
"outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04"
The Complete TRACE is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Technical Routing
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- <!-- ************************************
-->
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag X</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPR46</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-SET_IDOC" />
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
- <Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA">
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-ITAB_TO_BINARY" />
</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = F0EAB201EEA5F74A814EF22C32394FD0</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0009</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO____0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">No mapping required</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />
<Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">processing the outbound binding</Trace>
<Trace level="1" type="T">search outbound bindings</Trace>
<Trace level="1" type="T">outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace>
I have made neccesary Configurations for the Receiver agreement in the Configuration Directory...
Anybody could please help me out...
Regards,
Romit Arun ShankarHi Frank,
Many Thanks for your reply.The problem got sorted out and the IDoc(ORDERS04) which i send in SAP 4.6c gets into SAP 4.7 AS ORDERS04 but i have a new problem now....
I didnt use any mappings until now...but now i have to have the segment E1EDK14 filled up for Sales organisation, Distribution Channel, Division details as well as the material number. These segments will not be filled up when a PO is sent from the source system.These segments has to be filled only in the XI system...Is it ? or is there any other solution for it....
Now how we can have this segment E1EDK14 which can occur any number of times with constant values for SORG,DV,DC in the mapping process....
Waiting for ur replies....
Bye,
Romit Shankar Arun.
For this -
Account 'Cost elem. for settlmt AuC to CO objects' could not be found for
Hi All,
I am facing one error massage at the time of CWIP Asset settled in Cost centre
Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
Message no. AU133
Which G/L Account (cost element) we have to assing there in Account determinati A090.
What is empact this our G/L Account.
Please help me to resolve this issue.
Thanks & Regards,
juhisHi AP,
Thanks for your reply,
We find one element there assgin but that is not a G/L account what we do we can assgin that element in the Account determination in that asset account determination OR we have to create new G/L Account.
When we create new G/L Account in which Account head we have to create and what is impact that g/l account in our Balance sheet account.
Please help me ot understand that Process.
Edited by: juhis022 on Mar 2, 2012 10:15 AM -
Installation error for elements 11 on mac
I keep getting this error and I don't know how to fix it and get it to install! Please help!
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
----------- Payload: {64191879-379D-4ADF-9D1E-929FC71E7218} Elements 11 Organizer 11.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirg4uZPBoU/Assets1/application/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" to "/Applications/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" Error 0(Seq 3085)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 3085)
ERROR: DF024: Unable to restore file at "/Applications/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" from backup at "/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/Cleanup At Startup/.tempiGYkJC" Error 0(Seq 3085)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 3085)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 11: Install failed
ERROR: DW050: - Elements 11 Organizer: Failed due to Language Pack installation failure
ERROR: DW050: - Elements 11 Organizer_AdobeElements11Organizer_en_US: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11_AdobePhotoshopElements11_en_US: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11: Failed due to Language Pack installation failurePlease move the application /Applications/Adobe Elements 11 Organizer.app to trash(take a backup if you want) and then try again. Please let us know if the issue still persists.
-
WL6.1 : Get '404 : File not found' for all WARs
I had some web applications deployed which were running perfectly. Now suddenly
, I get '404 - File not found' for any URL - including the server root, i.e. http://localhost/
I was able to access admin console using http://localhost/console. I checked the
config of each application & couldn't find anything wrong.
Finally I had to re-deploy the WARs to get some applications running.
However, I am still unable to get the Default Web App running - the one handling
server root path.. (I've checked the server config & it shows DefaultWebApp as
the default application).
Any pointers on what could be wrong / correction needed ?
TIA,
SubodhCreate a subdirectory called 'classes' and copy your servlet class file
to the 'classes' dir.
mydomain/applications/
DefaultWebApp/
WEB-INF/classes.
Modify the web.xml file located in the mydomain/applications/
DefaultWebApp/
WEB-INF/ directory
<web-app>
<servlet>
<servlet-name>
myServlet
</servlet-name>
<servlet-class>
package.name.myServlet
</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>
myServlet
</servlet-name>
<url-pattern>
servlet-url-pattern
</url-pattern>
</servlet-mapping>
</web-app>
Start the default WebLogic Server.
Call your servlet from a Web browser with the following URL:
http://localhost:port/servlet-url-pattern
servlet-url-pattern is the value of the <url-pattern> element that you
defined in the web.xml file.
prakash wrote:
> Hi everybody ,I have this web app on weblogic 7 .The application
> works file with Tomcat 4.0 but on WebLogic server 7,I am getting
> 404 not found for all the servlets ,although weblogic is serving
> the html files without any problems
-
Hi All:
I need help!!!
I am using axis2-1.5.1, jdk 1.6, eclipse 3.5, and Axis2_Codegen_Wizard_1.3.0 and windows xp.
I used Axis2_Codegen_Wizard_1.3.0 to generate the client stub and proxy.
I get the following error when I tried to call the web service:
package com.ttdev.ss.client;
import java.rmi.RemoteException;
import com.ttdev.ss.client.SimpleServiceStub.ConcatRequest;
import com.ttdev.ss.client.SimpleServiceStub.ConcatResponse;
public class SimpleClient
public static void main(String[] args) throws RemoteException
try
SimpleServiceStub service = new SimpleServiceStub();
ConcatRequest request = new ConcatRequest();
request.setS1("abc");
request.setS2("123");
ConcatResponse response = service.concat(request);
System.out.println(response.getConcatResponse());
catch(Exception e)
System.out.println("e.getMessage():"+e.getMessage());
Here is my SimpleService.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="SimpleService" targetNamespace="http://ttdev.com/ss" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://ttdev.com/ss" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<xsd:schema targetNamespace="http://ttdev.com/ss">
<xsd:element name="concatRequest">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="s1" type="xsd:string"/>
<xsd:element name="s2" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="concatResponse" type="xsd:string">
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="concatResponse">
<wsdl:part name="parameters" element="tns:concatResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="concatRequest">
<wsdl:part name="parameters" element="tns:concatRequest">
</wsdl:part>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="concat">
<wsdl:input message="tns:concatRequest">
</wsdl:input>
<wsdl:output message="tns:concatResponse">
</wsdl:output>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSOAP" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="concat">
<soap:operation soapAction="http://ttdev.com/ss/NewOperation"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServiceSOAP" binding="tns:SimpleServiceSOAP">
<soap:address location="http://localhost:8080/axis2/services/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the dos-prompt, I get the following error message:
[INFO] Listening on port 8080
[ERROR] The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a
xis2/services/
org.apache.axis2.AxisFault: The service cannot be found for the endpoint referen
ce (EPR) 127.0.0.1/axis2/services/
at org.apache.axis2.engine.DispatchPhase.checkPostConditions(DispatchPha
se.java:65)
at org.apache.axis2.engine.Phase.invoke(Phase.java:334)
at org.apache.axis2.engine.AxisEngine.invoke(AxisEngine.java:251)
at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:160)
at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostReq
uest(HTTPTransportUtils.java:167)
at org.apache.axis2.transport.http.HTTPWorker.service(HTTPWorker.java:26
6)
at org.apache.axis2.transport.http.server.AxisHttpService.doService(Axis
HttpService.java:281)
at org.apache.axis2.transport.http.server.AxisHttpService.handleRequest(
AxisHttpService.java:187)
at org.apache.axis2.transport.http.server.HttpServiceProcessor.run(HttpS
erviceProcessor.java:82)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:619)
Thank you for your help!!!
Yours,
John.I had the same issue and managed to fix it.
I am using tomcat and had a filter configured for AxisServlet to open a hibernate Session. Somehow (I did not figure it out yet) this filter afects the way the AxisServlet resolves the EPR.
My fix was - remove the filter. It worked. Now I am trying to figure out why.
If you have any clues, please drop a line. -
JSF1091: No mime type could be found for file xyz.png.
Hi all,
I get error logs in weblogic server like :
<ExternalContextImpl> <getMimeType> JSF1091: No mime type could be found for file xyz.png. To resolve this, add a mime-type mapping to the applications web.xml.
I get this for all the image files ... I found something :
http://www.java2s.com/Code/JavaAPI/javax.servlet.http/webxmlmimemapping.htm
<mime-mapping>
<extension>java</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
What should I add (mime-type) for png files ?
Thanks..You use 'image/png' for this. Refer to MIME Types - Complete List » HTML Elements| Learn HTML | Tags | Tutorials | HTML Cheat Sheet for more info.
Timo -
Canon 5D MKIII - Camera Raw for Elements ?
Does anyone know when the Camera Raw plug in that supports the Canon 5D Mark III in Photoshop Elements 10 will be available ? I know release candidate 6.7 is available but only works with Photoshop CS5 - not sure why Adobe chooses to not make it available for Elements ? I also know that I can use the DNG converter to convert my 5D MKIII images to DNG format and then work in Camera Raw. However, this is a beta DNG converter and I have found that my converted images are slightly overexposed (about half a stop) and have more noise. Does anyone else have this problem ?
The real question is - when will the Camera Raw plug that supports the Canon 5D Mark III in for Photoshop Elements 10 will be available ? You pay a price for being an early adopter and this has seriously disrupted my workflow. I have a hard disk full of RAW images to work on - please help !!!!Adobe does not pre-announce software releases, mostly so they can change their mind up until the last minute, I think.
It’s also not the situation where Adobe needs to talk to Canon to decide when to release the next version of ACR. Adobe releases ACR on a relatively fixed schedule, so whatever new cameras have come out that Adobe has had the resources to profile with enough lead time to work out any bugs, will be in the next version of ACR when it is released on the internally-predetermined schedule.
Adobe reverse-engineers their needed information after having a camera in hand, not from discussions with the manufacturer, necessarily. Sometimes Adobe gets a camera from the manufacturer long before it is available to the public, and I would expect an important camera like the 5D.3 might have been one of those, but that just makes it easier to get the camera into the next scheduled ACR, it does not make the ACR update come out any faster.
Adobe also has a CS6 suite to work on and test so they’re not merely working on putting cameras into ACR 6.7 or ACR 7 for use with PSE10.
Maybe you are looking for
-
How do I save all the pics in text messages
I'm trying to upgrade to the Iphone 6, I have the Iphone 4s! After I upgraded my 4s to the * operating system, I go to messages, then details, it list all pics associated with that person! How can I get the pics out of the phone?
-
Is there any known viruses on the 8900?
When using my phone the last 2 days, volume icon keeps going up & down which clips the conversation when I'm talking. Is this a virus or a software problem?
-
Pen tool: Resize image inside a layer/ stop pen outline / white space after crop
I have 3 noob questions all related to the pen tool. 1. Whenever I use the pen to outline something and drag the image to another psd file I see a grey pen outline around the image. ex. http://screencast.com/t/GmKWAr5UH 2. Whenever I outline with the
-
The new safari is not working well
I have safari Version 4.1.1 before i updated to this version I can surf fast but recently after the new updates while surfing it takes too long for the page to open the site and if it takes too long it will say failed to open the page and cannot find
-
Standard pain.002.001.03
Hi We are using BCM, (Bank Communication Management) module Ban request the payment file on pain.002.001.03 format So please tell me if there are any standard Payment format in DMEE Regards