Warp image and path at the same time

I have this pepper, cut out from the background with a vector mask. We need the path for cutting out the printed pepper on our plotter.
From this same pepper we need some variations, like the pictures below (top one is original + path, bottom one is one of many variations).
I made a smart object from the pepper with vector mask and distorted it using a custom warp. I can rasterize the layer, but i can't find a way to bring the distorted path to the parent psd.
How can i distort both the pixels and vector mask at the same time? So i can place different versions in illustrator without needing to redraw the vector mask for each variation.
Thanks!

Ok got to the bottom of this. Turns out it won't work if you have an existing Warp transformation applied to a Smart Object, and a vector mask linked to that. But it will work the first time.
Thinking it through you realise that this is logical, because it would need to produce a kind of "compound Warp", using the existing Transform values applied to the object already, and then applying the new ones. Only one set of Warp values to the mask, and two to the Smart Object. They are not compatible operations.

Similar Messages

Transforming Layers and Paths at the same time

Hi
Does anyone know how I can transform(scale,perspective,distort,etc.) a layer and a path at the same time?
Thanks

1. Draw your path
2. Make it a vector mask linked to the layer you want to transform (Make layer active, then Layer>Vector Mask>Current Path)
3. Hide the path (command-H)
4. Command-T
5. Command-H again to make the path (vector mask) visible
6. Do your transform

Swap Images and URLs at the Same Time

I would like to not only to swap images when one rolls over a thum image, but at the same time I would like to have a link swapped in the new image. I am using behaviors to swap multiple images on a page. So to be clear I have several thums that one can roll over. When a thum is rolled over with the mouse a large image is swaped in a different location on the page. I would like to be able to attach a unique link to a URL to each of these new large images when they are swapped.

The link below will take you to a life page. In this example, the changing
text below the large changing image is in fact an image that is swaped out
as one moves the mouse over a thum on the right side of this page. This
changing text image will have an "Add to Cart" button. The button could be
part of the text or perhaps yet another image that changes as one moves
over the thums on the right. Here is where I need the help. As one clicks
on this text image that is changing (or changing button) I would like to
have a link associated with this image that will add the customors choice
of pillows to their cart. Need help with how to associate a unique link to
unique URLs with this changing text image.
Life page: http://katetroyer.com/Pillows.html

How to transform a layer object and a path at the same time?

Hi all,
I know I am going to kick myself when you tell me the answer to this!
I would really like to know if there is any way I can manage to to transform both a layer object and a path at the same time....or if there is any workaround to achieve this.
In a nutshell, say for example I spend a VERY long time creating an intricate path around a very detailed object, and then at the very end notice just how crooked and out of perspective it is, and would like to straighten it.
Of course I could transform and correct the object, and then carefully transform the path - but it just won't be exact, and I will have to spend a long time adjusting the path and making SURE it is perfect.
Isn't there any way I could get to transform them together?
Usually of course I do all the correction to straighten and correct perspective beforehand, but in some instances after I am done creating the path I then notice that the image could have used further adjustments.
I appreciate so very much any advice you may have:)
Thank you kindly,
Christine

Okay...I found another way as well... suddenly it all started coming to me in the last few minutes:)
Once the image is on it's own layer, then we can select the path and then make a vector mask by going to "Layer>Vector Mask>Current Path". Once the vector mask is created, simply click on the image icon on it's layer, then transform away to your heart's content, and the path is transformed along with it. Once finished, the path for the vector mask can be saved as usual. (Don't click on the vector mask icon when transforming the image, otherwise only the path will be transformed.)

Can I use a camera for application in Labview and VBAI at the same time ?

Dear all,
I'm trying to save an AVI file with Labview and make an image process with VBAI at the same time, in one machine.
The error : "Camera already in use" displayed.
My Camera is a GIGE and I work with Imaqdx. I've test the multicast mode but it only operate with several machines.
How can I do this ?
Thank's to help me,
Yoann B

I'm not necessarily saying that. It's been a while since I've used VBAI, so I don't remember all of the capabilities, but if VBAI can do the inspection and recording at the same time, you should be fine.
The trick is that only one program can access the camera at the same time. That application reserves the camera, thus making it unavailable to others.
Chris
Certified LabVIEW Architect
Certified TestStand Architect

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Can I watch video through my iPhone and TV at the same time?

Can I watch video through my iPhone and TV at the same time while using the Apple composite video cables? I am planning a trip in my car and would like to play videos for my kids through their video screen while my wife watches on the iphone from the passenger seat. I didn't want to spend $50 to find out it doesn't work.
Thanks in advance!

It doesn't work that way, sorry. When video out is being utilized, only the movie artwork (the cover or image) is displayed, and the actual movie is not displayed on the iPhone's screen.

Bulk load users into Directory and Messaging at the same time

Can I bulk load users into Directory and Messaging at the same
time?
<P>
Yes, but you are not really loading users into the Messaging
Server. The Directory Server contains all kinds of information about
users, including information about their email. So if you want to
load user information into the Directory Server, including the users'
messaging infromation, you must install the Directory server first.
Configure the directory server. Then install the Messaging Server.
Then you can load users into both by loading an LDIF file with the
user information.

Hi,
You can check the documentation: Multiple Copies of RMAN Backups ;-)
When backing up datafiles, archived redo log files, server parameter files and control files into backup pieces, RMAN can duplex the backup set, producing up to four identical copies of each backup piece in the backup set on different backup destinations with one BACKUP command. (Note that duplexing is not supported for backup operations that produce image copies.)
There are three ways to specify duplexing of backup sets when using the BACKUP command:
Specify a default level of duplexing with CONFIGURE... BACKUP COPIESAll backup commands that back up data into backup sets will be affected if you use this option, unless you specify different duplexing options for a command using SET BACKUP COPIES or provide a COPIES option for the BACKUP command.
Use SET BACKUP COPIES in a RUN block All commands in the RUN block will be affected, overriding any CONFIGURE... BACKUPCOPIES setting, except those where you provide a COPIES option as part of the BACKUP command.
Provide a COPIES option to the BACKUP command For this specific BACKUP command, files will be duplexed to produce the number of copies you specify.
Cheers
Legatti

Container resize and paint on the same time needed

Hi all,
I am trying to make a transparent window using screenshots and I am getting a flickering of the image I am drawing on the window.
I think this is happening because setLocation() method moves the window and makes the repaint but with the old graphics on it. When the paint() will be called probably the paint event will be executed after the move event so on the window the two Graphics will be painted. This is what I think that causes the flicker.
If anyone has an ideea of how can I make the move - setLocation() - and paint() in the same time please tell me!
Thanks,
Robert

You cannot do this with a UCM hunt group. CCX cannot play media to the caller after you invoke a Call Redirect or Call Consult Transfer.
You can do this if you configure the target users as contact center agents and use a Select Resource step. If none of the agents are available [ready] to take a call, you can play a welcome prompt or other actions that is interrupted if an agent becomes available. There are two noteworthy caveats to this:
1) You can only offer a call to one contact center user at a time. This would be analogous to a Longest Idle hunt group model.
2) There is a second branch that you will see on this step: Connected. Note that when an agent's phone is ringing, the caller is not in the queued branch of the step. The caller is hearing Network MoH.
This means in practice you will want to put the welcome message before whatever else you want to do with the call and let it complete.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Ipod nano (5th generation) - want to use headphones and charge at the same time

I have an ipod nano (5th generation). Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

Warp image and path at the same time

Similar Messages

Maybe you are looking for