Warp Stabilizer analysis process stopping and never ends (AE CC 2014)

I'm running the latest 2014 AE CC and I've been getting this issue running Warp Stabilizer on my clips. Intermittently, warp stabilizer analysis process would stop at certain frame and never ends. I have to quit / kill AE.
I'm running AE on 15" retina macbook pro 2013 with dedicated nvidia 750M video card, 16GB of RAM and plenty of disk space (over half a terabyte left), running Yosemite 10.10.2.
Has anyone experienced this? How do I solve this issue?

"During the analysis and solving stages, the Warp Stabilizer effect and 3D Camera Tracker effect use memory outside of the pool shared by After Effects and Premiere Pro. Therefore, you can allocate more memory to the analysis and solving phases for these effects by increasing the RAM Reserved For Other Applications value in the Memory & Multiprocessing preferences."
Thank you for that link. I'm going to check the "RAM Reserved For Other Applications" and increase the value if it's too low.

Similar Messages

When I open iTunes , iTunes Match started to process step 1. Always same process and never ending

When I open iTunes , iTunes Match started to process step 1. Always same process and never ending...
I tried some suggestions but I cant fix my problem. Do you have any knowladge about this problem?

For the past few months, and several iTunes upgrades, iTunes Match spends some time in Step 1 "Gathering" and sending information to Apple. Then Step 2 runs through the first 2092 of 2094 pretty quickly. Jumps to 2094. And then immediatly back to Step 1 again.
Repeat every 5 minutes or so until Match is manually turned off.

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203

Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform. The App Store shows there is an upgrade, so I click the download button. After about 2 hrs the process stops and an Error (102) appears on the screen. Any idea what goes wrong? THX

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THX

ahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering.

TS3048 My MacBook OSX 10.6.8 detects the wireless keyboard apple A1255 but once the passkey is ask the "pairing" process stops and displays a warning saying it was unsuccessful. Bateries are new on the keyboard and it has been paired to this MacBook .

My MacBook OSX 10.6.8 detects the wireless keyboard apple A1255 but once the passkey step show on the screen the "pairing" process stops and displays a warning saying it was unsuccessful. Bateries are new on the keyboard and it has been paired to this MacBook before. Mouse, iphone and other bluertooth devices have no problem pairing via bluetooth. Any suggestions where to look?

I read somwhere that firefox disables certain versions of java because it might give control of your computer to other malicious websites
I think you have to go to the java website and down load the version you need and enable it in firefox's prefrences
Sorry I may be a veteran in using firefox, but I know very little since I hardly had problems with mozilla untill just very recently hope this helps

Hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Warp Stabilizer: How to Start and End Full Frame?

Often I only need to stabilize part of a scene so I just crop the segment to be stabilized. But I want the transition to and from the stabilized segment to be smooth. There is no "timer" so I cannot change the level of stabilization from 0% to 100% over a period of 1-2 seconds. So how do I achieve this?

In the past when I wanted to stabilize a portion of a clip, I'd stabilize the part of it that I needed stabilized and then crop the non-stabilized part in to match the percentage that's scaled and then use the motion settings to sort of move the clip around to match the start or end frame that's stabilized. It's not perfect, but it's fairly seemless. Yeah, it would be nice to gradually de-stabilize something but for now, this is what we do on the rare occasion that we need to do it. Warp Stabilizer in After Effects is a bit more fully featured so maybe there's a way to do it there, I don't know.
Good luck!

Analysis Process Designer and Inventory Management

In the How to guide for Inventory Management it mentions that you can you can intialise stock in the Snap shot Cube using the Analysis Process Designer (APD). Has anyone done this and if so can you explain how or outline some steps? Thanks

Hallo,
the APD does`nt be a useful tool for modeling a performant
data flow. A lot of SAP BW user think so.
The performance problems are given by the ddic intern table, using to uploading the extracted data into the apd used wa_table and structures.
To have the best performance on your scenario, please use the following scenario as possible.
Step 1.
upload the extracted data from the psa into a data layer
there you can reduce and harmonize the data by using a transactional ods
Step 2.
build a infoset that joins the data
Step 3.
build one query to reducing data and make two copies of ist
Step 4.
build a useful data mining model
Step 5.
upload the results of the data mining model into a transactional ods
Step 6.
link the uploaded data into a infoset ore write back into a standard ods
Step 7.
query the data
If you use this scenario you have a lot of benefits. Better performance, better quality of persistent data and actual and traininged data.
The recommend next step (if you want a alerting) is to build a reporting agent report - if you have usefull processes in the query.
There are a workshop for Data mining and APD, named BW380.
I hope I helped you.
Otherwise give me a message.
[email protected]

When i open reader two AcroRd32.exe*32 processes open and never close even after exiting the reader.

when i open reader two AcroRd32.exe*32 processes open and do not close after closing the reader. i have seen 10 AcroRd31.exe*32 processes open. do I have an undetectable virus or is the software just poorly written and tested. I am running Windows 7 premium that is fully up to date and the reader is up to date also. i have even deleted reader and reinstalled it.
All 8 Processors activity jumps really high while AcroRd.exe*32 is running with no pdf documents open and as soon as i end the processes the processor activity goes down to near 0 according to the performance tab in task manager. My fan also kicks on because of all the heat from the processor.

open acrord32.exe and go to edit, preferences, internet, and then uncheck "Allow fast web view" and "allow speculative downloading in the background". This will save your processor and keep your system from locking up from all of the acrord32.exe processes running.

Best way to warp stabilize between premiere cs6 and AE cs6

I have a sequence with many clips, some with different speed (warp stabilizer doesn't work with speed in premiere CS6) whats the best way to stabilize these videos that are in different speeds?
Another question, in CS 5.5 I used the warp stabilizer in 1080P clips on a 720p composition (with fit to composition) this way I warp stabilizer could zoom/crop the video without loosing quality. Now premiere CS6 has warp stabilizer but I can use a 720P sequence with a 1080p video, warp stabilizer won't accept it.So whats the best way to do this in premiere CS6? (to get 1080p video stabilized in 720p sequence) or I can just stabilize in 1080p and export the final video to 720p and I will have the same quality?
Thanks

You can make a new sequence from that 1080p file, stabilize it, nest it, then copy and paste it into your 720p project. This way you won't need to export it beforehand.
I notice this topic is old, but it may help someone.
Best,
Bogdan

I click on the Firefox ixcon. Windows appears to start opening it. But it stops and never begins.

The hour glass appears, as if the program will begin. Then after 3 or 4 seconds it disappears. So I am unable to open FireFocx. I now have to use Internet Explorer (yuck).
It started happenming a few weeks ago. I would contunue to try to start the program and eventually it would open. Today for the first time, after dozens of attempts, it fails to open.

I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?

Query running, and never ends, need guidance

I am trying to track down 64 Id's that are not in one table and cannot seem to get the query right. I am in need of some guidance if anyone can help
I have joined two tables in one query:
SELECT line_item.ID
FROM sforce_opportunitylineitem line_item, sforce_opportunity opp
WHERE line_item.opportunityid = opp.ID
   AND line_item.part_outcome__c = 'Won'
   AND opp.TYPE <> 'Production'and that gives me 61957 ID's
Now that ID is a field on another table called oli_id__c
SELECT oli_id__c
FROM sforce_design_winwhich gives me 61893
A difference of 64 records and the Id that I am trying to find for reporting
I tried to combine the two using NOT IN and the query just runs and runs and runs and never finishes.
Any help would be appreciated
here is the full query:
SELECT line_item.ID
FROM sforce_opportunitylineitem line_item, sforce_opportunity opp
WHERE line_item.ID NOT IN (SELECT oli_id__c
                              FROM sforce_design_win)
   AND line_item.opportunityid = opp.ID
   AND line_item.part_outcome__c = 'Won'
   AND opp.TYPE <> 'Production'can someone help me out
TIA,
Mike

There is a fancy word for this something like a large result set for your second predicate or something, but I would try a not exists or a minus since the result sets from both the queries are larger:
SELECT line_item.ID
FROM sforce_opportunitylineitem line_item, sforce_opportunity opp
WHERE NOT EXISTS (SELECT 1
                              FROM sforce_design_win b
                              where b.oli_id__c = line_item.line_item.ID )
   AND line_item.opportunityid = opp.ID
   AND line_item.part_outcome__c = 'Won'
   AND opp.TYPE <> 'Production';or
SELECT line_item.ID
FROM sforce_opportunitylineitem line_item, sforce_opportunity opp
WHERE line_item.opportunityid = opp.ID
   AND line_item.part_outcome__c = 'Won'
   AND opp.TYPE <> 'Production'
minus
SELECT oli_id__c
FROM sforce_design_winHere's a conversation from Tom Kyte talking about the use of exists vs. in:
http://asktom.oracle.com/pls/asktom/f?p=100:11:506495961445515::::P11_QUESTION_ID:953229842074
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:442029737684
Message was edited by:
JoeC

Export just hangs and never ends

I am having an Oracle 9.2.0.6 STD edition in WIN2003r2
The export job was runnig fine but suddenly it starts to hang when it reaches
Exporting cluster definitions.........
It never ends
I have an invlaid XML object....
Any suggestions...
Message was edited by:
Maran Viswarayar

can u please post what are the paramaters u have given while exporting.
Regds
Nirmal

Systematic and Never Ending Problems With Elements 7

Alright I'll start from the top:
I bought this software via the website a year ago. Since the very beginning I've had issues that have NEVER been resolved despite numerous sessions with the support personnel.
I download the software (after paying the over $100 for it) and discovered that I was given an incomplete version. Naturally I was heated. I've tried on at least 3 different occasions to have this rectified by the Adobe personnel who have tried, but always failed to solve the issue. That's the biggest problem. On to the others.
Now, when I go to make a movie, the sound i've recorded from the clip (i use Fraps version 3.2.2, yes the PAID for version) never is allowed to transition over. The clip is without audio when I add it into the software. The only work around I have for this, is that I export the clip via Windows Movie Maker and then add it into Adobe Premeire. Naturally this DESTROYS the video quality.
Third problem, the final quality of the videos I create is very poor. We're talking just NASTY. I can view the clips just fine and their quality is top notch before I export them out of the program. The moment they hit my desktop, well, they look like shark chum bait fed through a paper shredder.
Here's an excellent example:
http://www.youtube.com/watch?v=kHJsf1ucajQ
Now, I know the quality on that video is trash because I had to export it through Windows Movie Maker to keep the game sound effects on the clip and then export it via Adobe. But, even on clips that purely adobe, that i've sacrificed the sound for, they look like trash.
Honestly, if i'm going to spend money on software I want my moneys worth.
I've been asked by scores of people (everyone knows I make and edit movies as a hobby) if I would recommend software for them to use; I've stopped recommending adobe. My entire experience with this software and company has been decidedly lackluster. I'm posting now after a year because I'm simply fed up.
I wanted to check and make sure it's not something I'm doing wrong. Considering that I paid for a complete version that Adobe miraculously never provided to me despite numeroues attempts, I thought that might have something to do with it.
So, online community, if you have words of wisdom, please share them. If not, I'd recommend moving to different software.
v/r
Fed Up Customer

Welcome to the forum.
Unfortunately, you found it rather late in the game. Let's look at a few points:
I download the software (after paying the over $100 for it) and discovered that I was given an incomplete version.
Because of the size of the program, and also the Functional Content (the extra Menus, Themes, etc.), the download is a two file process. The names of these files are similar, and many get confused, and think they are the same, only downloading and installing one, but not the other. This ARTICLE will give you the location and name of the two files. It was originally done done for PrE 7, but PrE 8 is tabbed on that page. First, the program needs to be installed, and then the Functional Content. Personally, I think that Adobe could make it more obvious, that one needs two files, and also rename the second archived file, so that it stands out as the one containing that Functional Content.
Now, when I go to make a movie, the sound i've recorded from the clip (i use Fraps version 3.2.2, yes the PAID for version) never is allowed to transition over.
FRAPS, and several other video-capture programs present problems, due to the specs. of the files that they create, especially the FPS and the CODEC used. To get some background on CODEC's, this ARTICLE will be helpful. PrE, just like its big-brother, PrPro, is designed around a miniDV tape workflow. There are other base workflows, like HDV and AVCHD, plus 100% DVD-compliant VOB, and a few others. However, when working with non-standard workflows, conversion outside of PrE is usually the best course of action.
For FRAPS, see this THREAD, this THREAD, this THREAD, this THREAD, this THREAD, this THREAD, and this THREAD. Note: that is but a start. Also, many of the replies in those have links to other threads. Plenty of reading.
Third problem, the final quality of the videos I create is very poor. We're talking just NASTY. I can view the clips just fine and their quality is top notch before I export them out of the program. The moment they hit my desktop, well, they look like shark chum bait fed through a paper shredder.
Without having the exact workflow, step-by-step, and then the Export/Share settings used, it is impossible to determine where the quality hit has come in, and how to address it.
Good luck, and sorry for your dissatisfaction,
Hunt

CcBPM - process stopped and SXMB_MONI_BPE without entries

Hello,
We have a strange behaviour of ccBPM on SAP PI 7.01.
Sometimes ccBPMs are not working properly.
So e.g. process is not started or in SXMB_MONI_BPE showing that a wrong lane after a switch is started.
Usually we could resolve that by reimporting the Int.process from the Repository or by adding a dummy container step.
But now the behaviour is really strange (but only for one of 6 ccBPMs implemented. So 5 are running fine)
a) ccBPM is not started, only SXMB_MONI shows the step to start the BPM as successful.
(After doing a small change in the ccBPM, which was tested successfully the week before).
b) Adding a dummy step (simply container with an append) enables the process to start.
Test for switch lane 1 is successful
Test for switch lane 2 fails. SXMB_MONI_BPE shows that switch lane 1 is choosen.
But the comm.channel monitor shows that the first step in switch lane 2 was started successfully.
(Connect via JDBC to select data)
c) Adding another container dummy step in switch lane 2 and reimporting the int.proc. into Int.Dir. results in:
SXMB_MONI shows all steps up to switch lane 2 step one (select of data)
-> SXMB_MONI does not show any entries for the started ccBPM.
d) Removing all dummy steps does not change the situation.
So at the end we deleted the implementation of the Int. process and rebuild all the objects using new names for the Int.Proc and its Config.Scenario.
Is there anybody with similar experience for such strange behaviour.
Best Regards
Dirk

Hi Heiko,
Check the OSS note 1126656 - BPE-TS: Permanent errors in the BPE inbound processing
In parrallel goto TCODE "SWF_XI_CUSTOMIZING".
Check whether ,any errors are there.
All entries related workflow or integration process should be with out any errors and active.
Regards,

Warp Stabilizer analysis process stopping and never ends (AE CC 2014)

Similar Messages

Maybe you are looking for