Warp Stabilizer Analyze Data - where does it really save?

Hello,
I had cut 4 episode documentary series on a macPro with CS6. I had used the Sub Space Warp stabilizer feature on many of the clips. All clips had been stabilized and I saved the project on our server with the projects files, preview files and Auto save files.
I then got a computer upgrade to a new macPro with more RAM - graphic - and processing power.  Yay! I have CS6 and CC installed on this.
I received the final design elements to insert into the series  ( the L3 and titles and credits ) and went to go and export the project off the server from this new computer.
It seems that all of the clips that I have used the Sub Space Warp Stabilizer need to be re-analyzed again, as the exports had the orange banner across the clips stating that it is being analyzed.
My question is, does Premier have to reanalyze the clips again because I have a new computer and the Sub Space warp data doesn't save with the project files but instead locally on the machine that edited the project?
If so, can I get all the project data and cache to save with the project files?
When I started this project, as with any project, I direct all the save elements and caches to a specific drive location, so various computers can work with the edit, and for efficiency. I don't think that the Sub Space Warp analyze data gets off the local computer drive... Am I wrong?
Any comments are appreciated.
Thank for your help.

I see that now as well. Yes thank you for your reply there Snarky.
I wonder why my exports had the orange analyze banner across the clips with the Warp Stabilizer on it.
You figure with that data stored in the project file, it would just load up with the project,
and when the software says "All media Loaded"  - that I wouldn't have to go back to each clip and get it to re-analyze for stabilization.
So time consuming.
I hope that is is an isolated incident.
This doesn't not seem to be the case, as I am not alone.
pass warp stabilizer between computers?
Reanalyzing Warp Stabilized Clips
Thank you Snarky McSnarkster

Similar Messages

  • Where does 3.0 save synched Notes on the computer?

    Where does 3.0 save synched Notes on the computer?
    thanks

    Solved now thanks to another discussion.
    Attempting to sync brought up a message 'Syncing Notes' but I couldn't find them.
    A terminal search revealed no sign of Notes.mbox in my ~/Library/Mail/Mailboxes folder even after multiple sync attempts. I had a look to see if there was a Notes.imapmbox there as well, as IMAP mailboxes have a different suffix but that wasn't there either.
    The poster advised taking the following steps (first make sure that you have Sync notes checked in the Info tab of iTunes:
    1. eject the iPhone from iTunes and disconnect it from the USB port
    2. force quit iTunes using Command-Q
    3. switch off the iPhone completely
    4. reboot the iPhone
    5. re-connect the iPhone via the USB port
    6. allow the sync to take place
    I had my ~/Library/Mail/Mailboxes folder open in a Finder window and shortly after the sync, up popped Notes.mbox. I still didn't see anything under Reminders in Mail but I selected Mailbox/Rebuild in Mail and now I have Notes available under Reminders. I have five active email accounts, each with a Notes folder available, but the one note I had left after losing all the originals during one of my sync attempts appears under On My Mac.
    To be honest, now I have got it working, I'm not sure how much use it is so I doubt if I will use it. I had thought that it would sync via Mobile Me and that there would be a desktop application to go with the iPhone one, or it would be integrated into iCal.

  • How to make the warp stabilizer analyze interlaced (upper + lower field) instead of progressive?

    I am having a little problem since I am new to Premiere pro.
    Until now I always used the warp stabilizer in After Effects for single shots in need of that. But this time, I was handed a project that requires a whole lot of stabilization. My plan is to drop the whole timeline (FCP 7/ProRes422 HQ Interlaced) via XML into Premiere Pro and apply the effect there to multiple clips.
    PROBLEM: When I do this, the warp stabilizer always (no matter how I interpret the footage or set the sequence) analyzes the footage progressively. At least that is what the effect preferences tab says during analysis.
    In After Effects I always see which field is beeing analyzed (it is indicated by a L and an U behind the frame count). Not so in Premiere Pro. Here it always seems to analyze full frames.
    I made a test and compared the results from After Effects and Premiere Pro: The file generated in Premiere Pro is much softer then the one out of After Effects even though I export both with the same output settings.
    Any help would be greatly appreciated !
    Regards, franse

    I just verified and the Description for Products (and possibly other objects too) are stored in table COMM_PRSHTEXT.
    The relevant Data element is COMT_PRSHTEXTX which has the domain PRSHTEXT40.
    If you look at this domain you have a parameter "lowercase" which is available as a flag option.
    <u><b>The explanation about this Flag is the following:</b></u>
    Lowercase letters allowed/not allowed
    If this flag is set, upper case and lower case are distinguished when you enter values with screen masks.
    Otherwise all the letters entered will be converted to upper case when you enter values with a screen mask.
    This mechansim is in effect for all the fields referring to this domain.
    <b>Solution would be</b> to verify if for this data-element the same Domain is used.
    If yes, you can flag this option in the domain.
    this should solve your problem.
    kind regards
    davy pelssers
    please reward if helpful.

  • Warp stabilizer analyzing too much.

    I have a composition that is 10 seconds long with a video clip. I added the Warp Stabilizer and shouldn't it just analyze just 3000 frames? It appears to be analyzing the entire clip even thought the comp is just 10 seconds.

    Make sure you set in and out points for your video layer.
    If for some reason that fails, precompose the video layer and warp stabilize the pre-comp.
    Here's another hint, after Warp Stabilizing your shot RENDER it to what I like to call a DI (digital intermediate) and others call a production codec and use that in the rest of your production. You'll be much better off in the long run unless your project is extremely simple. A DI is a lossless digital copy of your original footage to be used in the production pipeline for preparation of the final digital master from which you render your digital deliverables like H.264 files for almost every digital form of delivery today.

  • Warp stabilizer analyze alert burned into output

    Hello. Having a problem that I have not been able to find an answer to online. I have a clip in a timeline that has warp stabilize on it and when I export using media encoder the output file shows the analyzing bar rendered across the screen. This only happens with media encoder sequences sent from premiere. Doesn't happen if I just export from premiere. Trashed media encoder prefs but that didn't help. The clip is h264. No other effects in the clip. Any help would be greatly appreciated. Thanks! Chris

    Hi RameezKhan!
    Thanks for the input!
    Unfortunately i can't change the renderer, software only for this mac...
    I deleted the media cache and render files right before this happened so i didn't think that would be it...but I did notice that when I re-opend premiere that one clip would always need rendering again...
    I deleted media and render files again and it's been fixed...
    I though media encoder didn't use the render files...maybe it uses the cache and that was the fix.
    Either way it's working.
    Thanks again!
    Chris

  • Warp Stabilizer flicker, software renderer does nothing

    I started this project on CC 2014, then migrated it up to CC 2014.1. I have tried exporting a couple sequences from it multiple times, with different output codecs (uncompressed, Cineform, H.264), and all of the results are the same: flickering video and noisy audio.
    I have isolated the flicker to the Warp Stabilizer-effected shots, but no sequence setting changes or conversion to Software renderer over CUDA renderer makes any difference in the output. The audio also outputs as digital noise (sounds like when you listen to a data CD in an old CD player).
    It is not an option to go through and re-add all of the Warp Stabilizer effects to see what different that makes, there are too many of them on the various clips in the project.
    This affects both Premiere AND Media Encoder, so it's looking very difficult to get a quality render out of this.
    Please help!
    ====
    Windows 7 64-bit PC, latest security updates
    Intel Core i7-3930K CPU
    64GB RAM
    NVIDIA GeForce GTX 670
    CC 2014.1

    Hey Kevin here is my info. Let me know if I can further assist.
    PP 8.1.0 (81) Build
    Windows 8.1 with all the latest updates
    Source footage is Canon 5D MkIII 1080p30 all-I & Gopro Hero 3+ Black 1080p60 protune
    I do get an "unspecified drawing error" sometimes when applying Warp Stabilizer but not all the time
    WS worked fine until I updated from CC to 2014
    I'm not running any other software besides the rest of the Adobe suite. I sometimes have Chrome open while editing.
    I use Red Giant Magic Bullet looks quite a lot. I also use Neat Video noise reduction, Boris Continuum, and Twixtor.
    System Specs:
    Core i7-4770K, Gigabyte Z87X-UD4H-CF, 32GB RAM (Crucial BLS8G3D1509DS1S100 DDR3-1600), MSI GTX 970 Gaming, Samsung 256GB 840 Pro SSD (system), WD 3TB 7200 (Media), Seagate 2TB 5900 (Exports/Cache/Previews). The current project I am editing off of a 2TB WD Passport drive via USB3.
    I'm using MPE GPU acceleration. When I use software only I actually get a lot more render errors and the flicker worsens.
    Previews look perfect only on final output do I see the problem. I have tried rendering with the "use previews" box checked thinking that would help but it makes no difference.
    Hope we can get this solved!
    Edit:
    I also get an "unknown exception on frame 0 in Warp Stabilizer" error sometimes when applying WS.

  • Warp Stabilizer 4K to HD - does PPcs6 interpolate first then downsize when using "stabilize, crop, autoscale?

    I am using CS6. I have warp stabilized my 4K footage and want to output to HD at the best quality I can. I have two choices: I can either have warp stabilizer "stabilize, crop auto scale" then I simply render to HD or I can set "stabilize, crop" and then get rid of the black border (crop) using AME in export settings. So my question is: If I use option 1 does PP interpolate the footage and then "downsize" to HD thus reducing quality? Or Does PP make all the calculations "in one go" so the footage isn't actually interpolated then reduced? I hope I have explained this clearly - though I fear not :-) Thank you for any comments. Paul

    I've been experimenting exactly the same.  My conclusion is that stabilize, crop, auto scale does indeed crop the video first, then rescale back to the original frame resolution. So there is some loss of quality.  I've been working on 4K video and warp stabilizing first (no crop, no auto scale), then cropping as a nested sequence to HD (with key-framing to follow the action).  Depending on the amount of crop, what the video content is, and because you're starting with 4K footage to begin with, it's debatable as to whether the final HD rendered output is visually any different whatever method you choose.  I guess you'll only find out by trial and error.
    Steve

  • Where does SharePoint Foundation save the uploaded documents ?

    Hi,
    Can anyone here please let me know where does the SharePoint Foundation 2013 & Standard edition save the uploaded documents ?
    from the past SharePoint Server 2007 (MOSS 2007) experience, it is saved in the SQL Server
    WSS_Content database, is that still the case ?
    is there any way to redirect it to another file server / file share or even the locally attached SharePoint server itself ?
    /* Server Support Specialist */

    If SQL is down, then SharePoint is down..
    If your content databases are full then you'll likely still have access to the sites, but you'll hit errors when trying to perform any action that wants to write to the database.
    It's not possible to divert the content onto the file system, all you can do is increase the storage available to SQL. (Or if you're using the free SQL databases that have an upper limit, you'll need to migrate the data into a full version of SQL server.)
    Paul.
    Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

  • Adobe After Effects CS5.5-Warp Stabilizer analyzes but doesn't Stabilize.

    First of all,Hello everyone.I'm new around here.Hope you all having a good time.
    The problem is that when I hit the Stabilize Motion button, it starts to analyze in step 1 but when it finishes and skips to step 2 , stabilizing part takes just 3 second.So in the end,it doesn't stabilize the motion,doesn't do anything to the clip.So can anyone help me with that?

    The most common explanation for failed motion stabilization is the user has fialed to go through the steps properly. We know this form manyyears of answering thsi question and we know from manyyears of using the tool ourselves. It can be a bit confusing the first coule fo times you try to use it but it does work and it works beautifully. So, before we go through many posts and questions and suggestions, please review the Help section one more time and try to initiate and apply the stabilizer again. Do it slowly. One step at a time.

  • Mdworker deny file-read-data, what does it really mean?

    I get numerous log posts like this:
    3/17/14 7:22:57.561 AM sandboxd[5688]: ([4412]) mdworker(4412) deny file-read-data /Volumes/Time Machine Backups/Backups.backupdb/Jack Shelton’s iMac/2014-03-17-042247/JackHD/System/Library/Fonts/TimesLTMM (import fstype:hfs fsflag:4809018 flags:48200000056 diag:0 uti:com.apple.font-suitcase plugin:/Library/Spotlight/Font.mdimporter - find suspect file using: sudo mdutil -t 235288)
    My questiions are:
    What is being sandboxed, the mdworker or the file Times LTMM or the mdimporter?
    Which one has the sudo command in it?
    What does the -t flag/option mean?  Looking it up via man mdutil in the terminal, it does't exist.
    I saw this type of post quite frequently in Mavericks so much so that I decided to start over from scratch.  I wiped the HD including the HD Recovery partition and installed OS X 10.6.8.  I am now in Mountain Lion and have reinstalled MS Office 2011 and loaded the main identity data from my recovered files.  I did not see any adverse log posts until I ran the first time machine backup.
    I hope someone can clear the air for me with perhaps a way to fix it.

    Thank you Baltwo.  It's a major relief to know that the sudo command is being used by an Apple app/process and not by a file that's not supposed to have it..  However a few more questions if you don't mind.
    Is the font file the suspect file or is it this particular mdworker?
    If the font file is the suspect file will a process or app that calls for it be allowed to use it?
    Which process/app/file invoked the sandbox and deny file-read-data?
    What is the role of the mdimporter?
    These questions are part of my attempt to understand how a large part of the files on my computer and Time Machine become corrupted when I first installed Mavericks.  Mainly .plist (and other plain text files), .png, jpeg (and other picture types) and pkg info bundles would have thier icons and file Kind changed to Unix Executable files, spreadssheets and doc/docx would become genrandom (or something similar).  I became aware of this when my machine began freezing up.  I made several clean reinstalls and the problems would reoccur on plugging in the Time Machine.  I eventually recovered the files I wanted from the Time Machine but I had to use another iMac with an older OS X.  I repartitioned my machine and rebuilt it to Mountain Lion and i'm in the process of reloading with what I hope are non corrupted files. Although I still see log posts like "Locum[6230]: Connection with distnoted server was invalidated" every time I paste a folder or file.  I don't know what that means but it doesn't seem to cause any further reaction or posts.
    My apologizes for bothering you with alll this and thanks for your insight.

  • Where does OS X save your Web Clip widgets?

    Hi,
    Does anyone know where Leopard saves your webclip widgets? They are not in user/library/widgets or in Mac OS X/library/widgets.
    Thanks
    S

    Ok. My best guess is based on using Activity Monitor to inspect the process, and look at "open files and ports".
    From this a candidate directory stands out to me:
    /private/var/folders/<random characters>/-Caches-/com.apple.dashboard.client/
    This has a cache.db that could be involved.

  • Where does xcode 5 save the executable files that it creates?

    I already built my console application, and I can run it from xCode as well. Now I'd like to find the executable file it generates. I saw in an old tip in this forum that it's just to right-click the corresponding product item and select Show in Finder in the menu. However that option is disabled, as you can see in the picture below.
    I also tryied the bin\release\debug and it's not there as well.
    What am I doing wrong?
    Tks in advance,
    Mauro Assis

    I checked the Locations and they're default, as you can see below:
    Am I correct?
    Opening the default path in Finder:
    Do you think it should be here? Where?
    Tks again,
    Mauro

  • Where does Reader X save update preferences?

    I'm trying to copy preferences to all users folders so anyone logs to the computer will have the same settings... I'm interested in update settings preferences in particular. I set it to don't download and would like to replicate that to all users.
    I tried both C:\Documents and Settings\<username>\Application Data\Adobe\Acrobat\10.0 folder and C:\Documents and Settings\<user Name>\Local settings\Application Data\Adobe\Acrobat\10.0 but it doesn't look like it keeps it here.
    I couldn't find any reg key that has anything to do with update preferences.
    Please advice.
    Thanks
    Ed

    It's most likely this file
    com.apple.CharPaletteServer.plist
    which is in the directory:
    ~/Library/Preferences
    From looking at the file, it's not clear that it has anything more than the last time it was used.

  • Where does Pages temporarly save the documents?

    I worked on a document and wanted to save it. So I closed full screen mode and then Pages had no reaction before being back without crash. But the document is not there anymore. Just the selection of document types is there! How can I get it back?

    First go to:
    Menu > Window > click on Untitled if it is listed
    If it is not listed and you have never saved it then it is lost.
    Make one of the first things you do, save the file with a sensible name in a sensible location. OSX will take care of saving after that. By all means still do a save regularly, as Yvan informs me OSX only saves every hour by default. You can change that I believe (I'm not currently in Lion) in:
    Menu > System Prefernces > Time Machine
    Peter

  • Is there a way to access Warp Stabilizer's internal data?

    Hello,
    I have some footages where I pass through a relatively narrow gate with the camera. My footages are typically quite shaky and so far I have been using Warp Stabilizer with great satisfaction. It really works well. However, in these scenes it messes up: it seems to introduce a perturbation in the scale at the instant of passing through the gate (it quickly zooms out for a short instant), which messes up the background (which contains interesting stuff). Is there a way to access the internal data it produces during the analysis to cross-check my assumption, and try to manually correct it?
    Thank you very much
    Daniel

    Hello,
    Thank you for your response. I think the 'Preserve scale' option would do the job (if my suspicion is indeed correct). However, it does not exist for me. Do I miss something, or is it another version of PP? I am using Premiere Pro CC, and downloaded the app about a month ago (and I have only this 1 month of experience), so it should be pretty recent.
    (It would be nice to have some graphs showing the corrections PremierePro calculated during the analysis, like scale, rotation etc of the camera - but this is for mere curiosity if the 'Preserve scale' did the job I need).
    Thank you
    Daniel

Maybe you are looking for