Warp stabilizer crops when it shall scale up to full screen?

the picture says it all.
1 hour ago it worked fine, but suddenly it all changed and I don't know why.
do you?

I don't not really know what you are meaning..
Which resolution, which zoom lever? comp, clip?
Look on these pictures...
Tell me in detail how to.
Thanks for answering.

Similar Messages

  • Warp stabilizer crops bottom of video!

    When I try to stabilize some footage shot with my GoPro Hero 3 Black, warp stabilizer crops off the bottom of the video and greatly reduces the res of the video.
    The steps I am following:
    Import video using GoPro Cineform software (This leaves me with an .mp4 file)
    Create new sequence from clip in CS6
    Apply warp stabilizer to section of the clip
    Render
    Watch - and the clip has the bottom 1/3rd cut off and the video looks out of focus.
    I cant for the life in me figure out what is going on! Please help!
    Thanks

    So, the first image is jsut before it gets to the stabilized section....
    Then, as soon as it reaches the selected area that has had the warp stabilizer applied the bottom is cut off!
    Am I missing something stupid here?
    Thanks

  • Warp Stabilizer crops bottom of video if videos layers are beneath it for no reason.  Why???

    Warp Stabilizer crops bottom of video if videos layers are beneath it for no reason.  Why???
    remove the layers beneath and it's fine.  Hopefully adobe addresses this issue asap to save all of us a good amount of time.

    I have noticed similar: apply crop to a layer and with all settings at 0 a line of underlying video can be seen at the bottom.

  • I have problems with my project in imovie, when I play the proyect in full screen it interrupts and tells me to report it to apple...what can I do? I need to finish and convert in video and just cant, who can help me? My mac is Air...

    Dear comunity I need urgent assistance with my imovie proyect
    I have problems when I check my proyect in full screen it simply stops and aborts out of imovie, tells me that ocurred an error and asks me if I want to report to apple the error. But dont know if the problem is that I have too many resources in the proyect. Its long and has a lot of videos and music all the proyect, also it has about 20 min.
    please help me

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • The Firefox window pops up on a regular interval when any other program is being used, even when a film is playing in full screen mode from Firefox.

    The Firefox window pops up on a regular interval (I think every 5 or 10 min) when any other program is being used, even when a film is playing in full screen mode from Firefox. It does not happen if Firefox is not running (i.e. it does not start by itself). The OS is Windows 7 SP1 and this begun after installing the Firefox update 5.0.1. Exactly all programs are updated with the latest version, the computer is clean according to Microsoft Security Essentials. Please solve this problem.

    -> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
    -> go to Help Menu -> select '''Restart with Add-ons Disabled'''
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Toolbars -> unselect All Unwanted/Incompatible Toolbars
    -> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
    -> go to Tools Menu -> Options -> General -> in '''Startup''' section click '''Reset to Default''' button -> place Checkmark on '''Show the Downloads window when downloading a file''' -> select Radio Button option2 '''Always ask me where to save files'''
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
    -> Click OK on Options window
    -> click the Favicon on SearchBar -> click '''Manage Search Engines''' -> select all Unwanted Search Engines and click '''Remove''' -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
    -> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
    -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons and Themes later. Check and tell if its working.

  • Sometimes when i get out of the full screen option for a microsoft word document i lose my main toolbar (the toolbar with the minimize and escape buttons, etc. etc.)

    Sometimes when i get out of the full screen option for a microsoft word document i lose my main toolbar (the toolbar with the minimize and escape buttons, etc. etc.)??

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro

  • When I play an iMovie at full screen, how can I remove the bottom toolbar

    When I play an iMovie at full screen, how can I remove the bottom toolbar?  It shows up on the projector screen and I don't want my audience to see those tools at the bottom quarter of the screen.

    Do a malware check with a few malware scan programs.
    You need to use all programs because each detects different malware.
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Warp stabilizer cropping/position issue?

    So I don't think I've ever had this issue and I'm wondering if has to do with using it on a 13" macbook, since i've never had this issue on my iMac, but when I place the warp stabilizer effect the clip turns into a small cropped corner like so in the photo. This happens with any clip even if I try to adjust the stabilizer settings. Any help would be appreciated!

    Hi mlhidalgo,
    Please go to File > Project settings > General and change the GPU Acceleration to Mercury Playback Engine software only. After you will click ok, it will ask you to delete previews or keep previews. Choose Delete previews and see if it helps.
    Also, please report if you have Intel Iris graphics.
    Thanks!
    Rameez

  • Warp Stabilization crops to letterbox?

    I cant quite put my finger on just what is going on here,
    but I think Warp Stabilisation is pulling a bit of a weird crop job on my footage.
    The letterboxing effect seems to increase as I decrease the maximum scale slider.
    What im doing is replacing a clip with an after effects composition in premiere pro,
    and then simply dragging the warp stabilizer ontop of the footage to let it do its thing.
    Any advice or ideas on whats going on?
    Running windows 7 64bit, AE version 10.5.0.253, PP version 5.5.0.233

    Youre indeed right about there being lots of movement, this is the start of a video with a small airplane darting off.
    Your arguement that maximum scaling is too small doesnt seem to hold up to my problem though.
    If I increase the maximum, the letterboxing gets even worse.
    My goal is to get a steady shot of an aircraft in the air.
    Tracking points dont seem to take hold of them, and warp stabilize also seems to get confused.
    The only program that can do it flawlessly is deshaker in virtualdub.
    How I wish I had that plugin for Premiere Pro.

  • Warp stabilizer crops clip off screen - help!

    Adobe Premiere Pro CC - most current update.
    When I apply the Warp Stabilizer effect, it crops/moves the clip almost completely off screen in the preview window. It also remains this way when I export.
    I am uploading dslr footage with these properties:
    File Path: /Users/Braedin/Desktop/Banff trip/Friday/MVI_9850.MOV
    Type: MPEG Movie
    File Size: 52.5 MB
    Image Size: 1280 x 720
    Frame Rate: 59.94
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:00:10:03
    Pixel Aspect Ratio: 1.0
    I then slow down footage to 40% to a 24fps look (orginally 60fps)
    I then "Nest" the footage to be able to apply the Warp Stabilizer effect.
    This is what it looks like without applying warp stabilizer:
    This is what is looks like after applying warp stabilizer and rendering the clip:
    These are the properties of the "Nested" clip with Warp Stabilizer:
    Nested Sequence 03
    1280 x 720
    00;00;04;22, 59.94 fps
    48000 Hz - Stereo
    Finally, here are my current Sequence Settings in which I am having the issue:
    Any help would be greatly appreciated as I suspect its an issue with sequence setting.
    Thanks,
    Braedin

    If you have a Retina Macbook Pro you can download the latest NVIDIA drivers from their website, which will enable you to use CUDA GPU acceleration in Premiere Pro, which fixed the problem for me, and is faster to render etc than Software Only.
    More info at this link, which also contains a link to the NVIDIA drivers:
    Enabling CUDA for Premiere Pro and After Effects in the MacBook Pro Retina

  • Warp Stabilizer error when using dynamic link

    Hey guys,
    So I'm very new to video editing, and not surprisingly, I'm running into problems.  I'm trying to use dynamic link to allow me to Warp Stabilize and color correct video clips in a Premiere Pro project.  When I try to apply the Warp Stabilizer (through dynamic link) in After Effects, I get this error message:
    After Effects error: Stabilization analysis doesn't work with Collapse Transformations (514)
    (25 :: 101)
    I read the only other thread on this which linked to the following page:
    http://help.adobe.com/en_US/AfterEffects/9.0/WS064964FC-424C-4e5a-A5C3-2160B3DFBCA4a.html
    Unfortunately, that didn't help me much.  Maybe the answer is in there somewhere, but if so, its way over my head.  Can anyone give me a simple explanation of why this doesn't work?  I feel like it should be a simple solution so I don't have to go through the process of importing into AE, render, export, import to Premeire Pro, and replace the clip there, blah blah.  This is what dynamic link is for, right??  Thanks for any advice you guys have!

    Not sure I properly understand you...
    As for me, the solution is in AE warning message - just disable Collapse Transformations switch in your AE precomp...

  • How can I change the background colour when working on a doc in full screen view (pages)?

    Recently I have been working on docs without the distraction of having to see my desktop around my page file by using the full screen view in pages. I do find the contrast to an all black screen too harsh though and it makes my eyes more tired than seeing the clutter of my desktop around the page. Is there any way I can change the background colour?
    Any help much appreciated!

    When you are in Full screen mode move the cursor up to the top to show the Format bar. Then look to the far right. There you'll see Background  and a rectangle. Click on the rectangle and change the colour.
    For information on Pages download the Pages User Guide from your Pages Help menu.

  • How do I stop the taskbar from showing when I watch a video on full screen?

    When I watch a video with Mozilla Firefox on sites like YouTube, Google Video or Bing Video in full screen the taskbar shows at the bottom of my screen and doesn't disappear like it does in Internet Explorer. How do I watch videos in full screen without the taskbar showing? It's not a website problem, it's not a Windows problem, it only does this on Mozilla Firefox's browser. All three websites play perfect full screen video on the Internet Explorer browser with no taskbar showing at the bottom..

    I got it :)
    (I tried using Google Chrome but the same problem occurred, by the way).
    a) Right-click on the desktop area, click on "Personalize" then on "Display" (bottom left), "Set custom text size (DPI)" (left) and check "Use windows xp style DPI scaling".
    or
    b) Right-click on the desktop area, click on "Personalize" and change the Windows 7 Aero theme to Windows 7 Basic or a High Contrast theme.

  • Why my windows 7 when i move up expands to full screen

    My computer HP Intel core 64 bit professional, when I move my windows to the top of the screen it automatically expands to full screen, sometimes I want to use another window and i cant, that is annoying, how to avoid that.
    This question was solved.
    View Solution.

    Welcome the forum, Angelitos.
    You may have Aero Snap turned on.  You can disable the feature.
    See the following document:
    HP PCs - Windows 7 Accessibility Options - c03543992
    Scroll down the document a bit more than halfway;
    See the Section titled:  Disabling Aero Snap
    You might reboot / restart the computer after making the change.
    More information:
    HP Notebooks - Using the Aero Graphics Option (Windows 7) - c01857680
    That should do it.
    Kind Regards,
    Dragon-Fur

  • It won't let me play videos in full sceen mode when I try to, and the full screen option is greyed out. So how do I fix it?

    How do I get it to let it to let me play videos in full screen when there is no option for this by the controls in the little box, the one to maximize won't work, and the full screen option is greyed out in prefernces?

    I had the same issue and have now solved it.
    Here is how: https://discussions.apple.com/thread/2633729?start=229&tstart=0
    Hope this helps,
    Jérôme.

Maybe you are looking for

  • Rounding of document total in draft A/R Invoice

    Hi All, I am creating document draft of A/R invoice through user defined screen (DI API). after creating the draft document, when I see the actual draft document through document draft report in SAP, the document total has the difference of 0.1. wher

  • CC&B LoginModule for Weblogic Change of Password

    Hi All, I realise this is more of a Weblogic question, though I'm specifically after a working example of LoginModule that can be used within CC&B on Weblogic to: a) Force users to change their password if their password is reset; b) Force users to c

  • Displaying an image in my JSF page

    Hello, I am a beginner in JSF, and I wnat todisplay a picture loaded from my Data Base in my JSF page. I follow this steps to get my image from my DataBase but I don't know how can I put it in my JSF page: 1/My image is stored in my Data base (Blob t

  • Need help exporting animation to Wordpress (I've looked at all the tutorials I could find).

    Alright, I've been working on a slide show animation for sometime now, but I need to export it to wordpress and I can't exactly understand how to do it correctly. I've even used the edge wordpress plugin, but it doesn't seem to work at all (I tried o

  • Changing the virtual keyboard on the N8?

    Hi, I have a strange issue with the virtual keyboard on the N8. I live in Flanders-Belgium, we write in Dutch but are using Azerty keyboards like the French so my question is; is it possible to change the virtual keyboard on the N8 from Qwerty to Aze