Warp Stabilizer not in Premiere Pro CS5.5

I can't find it anywhere. I've looked in the plug in folders and it isn't there. Is there anywhere I can download it from?

It is in After Effects CS5.5. It wasn't added to Premiere Pro until CS6.

Similar Messages

Warp Stabilizer Constantly Crashing Premiere Pro CC 2014

I have never had an issue applying warp stabilizer to clips, now it constantly crashes my system during the analyze phase. Does not seem to be an issue with any other effects. Have the most current version of premiere CC 2014. Running Windows 8.1 Plenty of memory, etc. Has never been an issue, now it happens every time! Help!!

I am having similar issue - without the crashing. Any clips I use warp stabilizer on do not retain their render after I close the project.
What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update). v8.0.1 (21) build 2014.0.1 release
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) Cloud says i'm up to date
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac". Windows 8.1
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime". mp4 from a gopro
If you are getting error message(s), what is the full text of the error message(s)? no error
What were you doing when the problem occurred?
Has this ever worked before? no
What other software are you running? Chrome
Do you have any third-party effects or codecs installed? No
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU). Dell latitude e7440 8gb ram, ssd
Are you using Mercury Playback Engine GPU Acceleration? i dont think so
Does the problem only happen with your final output, with previews, or both? clips do not stay rendered in timeline after saving/close a project and reopen

Hardware not Supporting Premiere Pro CS5.5 (and after effects)

Hardware: 1st generation Macbook Pro 2.0Ghz Intel Core Duo processor, 2g (maximum ) ram, 500gb hybrid SSD/7200 hard drive. Mac OS leaopard 6.6
I bought the master collection recently which includes premiere and after effects CS5.5. Pre sales I was advised by adobe that ALL macbook pros will run all these products (by an adobe customer services Advisor)
I can't load them because (as I have now learnt) that the core duo processor only supports 32 bit- I phoned technical support, many times since 15th July and was repeatedly told that ALL macbook pros can run them, it was just a case of changing my OS to 64 bit. Apple are clear that this is not the case.
Eventually I was referred to a tier 2 advisor, who asked me which processor type, and finally said it is clear that I need earlier versions to run on this and I would be contacted by email to provide a earlier 32 bit version of these 2 programs (as is supplied to windows 32 bit users). This was 2 weeks ago and I have had no response, I have phoned several times and some advisors try to start the whole process again and insisting that I should be able to install these.
Today an advisor has told me that they have checked the notes and the tier 2 advisor has advised I "need to upgrade my hardware" (ie buy a new mac !!!)
No-one will give me any phone numbers of a tier 2 advisor to discuss this or complain about it. Nor an email address.
First i want to request that adobe, having misled me, should give me earlier copies. Especially as this has already been agreed. Secondly I want to complain about the huge amount of time wasted and how I have been fobbed off.
Apologies if this is not the exact forum space for it but I cannot find the issue on FAQ so I would be very grateful if anyone can put me in touch with the right person, or if any of the moderators would know.
Michael Bannon

8/17/11
Case #0182568779: case update: 0206296078
Withdrawn
8/16/11
Case #0206296078: Download Link
Withdrawn
8/2/11
Case #0182523822: Unable to install After effects
Withdrawn
8/2/11
Case #0182527143: Escalated case :182523822, 0206296078
Withdrawn
8/1/11
Case #0182524205: installation issue
Withdrawn
Many thanks: these were the case numbers- these have all bee witthdrawn despite the fact none of them has yet provided the solution promised by the tier 2 advisor.
Michael

I have a problem with the Warp Stabilizer in Adobe Premiere Pro CC on mac

If I want to apply the Verkrümmungsstabilisator on a clip, suddenly only a small neckline of the clip appears in the upper left corner when the effect has finished analyzing. The rest of the clip appears black. Why is that? Is this some wrong settings, I've met?

Hi skwosnjak,
Please try to switch the renderer to software only mode, So, go to File Menu>Project settings>General and change the Renderer option to Software only Mode.
Regards,
Vinay

Premiere Pro CS5.0.4 -Will not play any video- reinstall didn't help

here's my system info -
Model: MacPro5,1, BootROM MP51.007F.B03, 4 processors, Quad-Core Intel Xeon, 3.2 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
   ----------------I only use one monitor, 1920x1200, 32bit color depth
   ------------------No Capture Card, No Sound Card or I/O box
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: TSSTcorp CDDVDW SH-222AL
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
---------- This 2tb Hitachi is my data drive - there are 600GB free (33%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 223.57 GB
   ---------This 250gb SSD drive is my system/application drive - 120GB free (50%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 111.79 GB
------------this 125GB SSD I use as a project-specific drive to serve up video very quickly when i'm generating Video material using the software VDMX
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd300000 / 2
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd320000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, Up to 800 Mb/sec
i've been using Premiere Pro for about a year and a half with no trouble, no crashes that i can remember.   I updated to 5.0.4 when it came out and experienced no problems.
I have not made any changes to my system (drivers, programs, etc.) since the last time i worked with Premiere Pro with no trouble. The only difference is that i generated approx. 52GB of new video files (mov. uncompressed 32bit 640x480 resolution) that i was beginning to edit in to a music video.
My current problem is:: there is absolutely no playback of video in 5.0.4.   not in the tiny project window preview, not in the source preview, and not in the timeline/canvas window.   when i push PLAY, the button turns into a square STOP button, but nothing happens.   this is independent of project or file type. The project i was working on when playback stopped is using uncompressed 640x480 32bit Quicktime files and one 44khz/16bit .AIFF file.   as a quick doublecheck, I just added a 640x480 Apple Intermediate Codec file and it also will not play back.   I opened older projects and none of them will playback.
My problem started while i was working on a project. I was working on the project for probably an hour and a half with no trouble. Then it seemed to get a bit sluggish and i could hear the HD churning a little more.   After rendering out a short section (just under 10 seconds), PPro did not play back the just rendered (now greenline) section. Immediate playback of rendered material was the default behavior, and this was the first time ever that the just rendered section did not play back.   I then discovered that no video would play back at all--in any of the windows.   I can scrub through all the video without any trouble--all the frames are there.
I shut down PPro, & restarted. No change.   I restarted my computer. No change.
Realizing that the problem was likely related to a lack of space on my data drive, i deleted approx. 500GB of files off my 2 TB drive, leaving just under a 1/3 of it free. i checked the drive for errors, and defragmented it. Premiere Pro still wouldn't play any file from any project.
The files are fine, they will playback anywhere else (several different file types involved in different projects). The files are compatible with Premiere Pro (uncompressed VGA resolution Quicktime .mov), i was editing on the timeline with them for hours before all video playback stopped.   All other Adobe programs (After Effects, Photoshop work fine).
I tried to find an answer/solution on these forums, unsuccessfully.   After uninstalling PPro and reinstall (did not help), and entire Suite uninstall, Adobe Clean, and reinstall, neither version 5.0.0 or 5.0.4 will play video --the no playback problem has persisted.
I was running out of HD space --i had less room than i thought -- down to about 7% of free space, a bone-headed move on my part. I'm not surprised that playback performance got compromised due to lack of space.   But i'm shocked that the problem is persisting.   Fortunately, i had just backed up my entire system the day before. (i've backed up many times before and this never affected PPro performance)
i tried to "CLEAN" the media cache for the sequence but it had no effect (in searching the forums, i saw somebody else have their 'crashing Premiere Pro' problem solved by hitting this button). I just took a look in the user/application support/adobe/common/5.0 to look at the "Media Cache" folder and the "Media Cache Files" folder.   Neither of them are empty, even after hitting the CLEAN cache button in the main preferences 'Media' settings window.   I don't know if this is the correct behavior or not.   (i'd expect a "clean" command to empty the folder, but i'm not the programmer)
This does not appear to be the ATI/5.0 problem that so many Mac users suffered (i was lucky to never have that problem).    Again, i've never had any problems with Premiere Pro over the last year and a half, until working on this latest project with the Hard Drive very low on space.   I'm 99.9% positive that's at the heart of the issue.
I don't understand why a clean reinstall did not help in this regard. The problem is clearly PPro specific.   I found one topic in the forum where someone else experienced this same "no video playback" problem, but there was never follow-up from the user saying whether or not his problem was solved (or what was done to correct the problem).
I'd love to get some help--- seems to be a very rare issue, but right now, i can do no video editing. btw, i started a new project as well and imported a .mov file -- same problem, no video playback.
the weird thing is that i can actually still edit video. i just rearranged my timeline assets and rendered out a minute-long quicktime (Apple Intermediate Codec) .mov and it looks and plays as it should.    This is really weird. I'm baffled -- there must be some way to fix this.   I don't want to have to go back to Final Cut, certainly not when i've already paid for Create Suite 5 Production Premium and EVERYTHING works except for video playback in PrPro.
thanks in advance for your help
Message was edited by: magneticjak
Message was edited by: magneticjak

hello.   hey, thanks very much for writing back. i got some good info with a search or two. (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs, OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
from User /Preferences/Adobe:
com.adobe.AdobePremierePro.plist
com.Adobe.Premiere Pro.5.0.plist
and from System Preferences:
the file: Adobe Premiere Pro Prefs
and..
/.../Premiere Pro/5.0/...
AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
Debug Database.txt
Placeholder Preset.epr
PostEncodeCmds.pref
PresetCache.xml
Trace Database.txt
NOTE:
of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but... it seems to have worked.
I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering, so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
happy editing,
peace

Where can I find Plugins / Transitions for Premiere Pro CS5 (not Cs 5.5 or 6) ?

Hello,
I am searching and searching for transition packs for Premiere Pro CS5, there are lots for 5.5 or 6 but none for 5. At least I could't find them.
Any ideas anyone?
Thanks in advance
Alex

https://www.adobe.com/products/premiere/extend.displayTab4.html
Chances are most plug-ins working for the later versions will also work for CS5, but you can check with each company if you're not sure.

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

Premiere Pro CS5 not responding after 55 minutes of capture with intensity shuttle

Hi and thank you for the valuable resources on this forum.
I am capturing analogue video into Premiere Pro CS5 using he Blackmagic Intensity Shuttle (with Time Base Corrector in the video path). My captures are stopping at 54 or 55 minutes when the computer becomes non responsive. This has happened with the Blackmagic motion jpeg codec as well as the 10 bit YUV capture. Same thing happens if I capture with media express (the blackmagic capture software)
I have tweaked my system as per many of the recommendations in the forum.
Running CS5 5.03, autosave set to 10 minutes (same problem with no autosave or autosave at 20 minutes)
Windows 7 64 bit fully updated
i7 - 930 cpu
Gigabyte x58A - UDP5 (Revision 1)
24 Gb Ram
Nvidia 470 - MSI with the twin Frozr cooling solution.
Restore off, indexing off, windows search off,
Followed tips from forum and Viper regarding optimizing system
3 Hard drives
System on standard Sata 2 drive
Project capture to OCZ Vertex 3 120 g SSD drive (nice bit of gear) running on Sata 3 controller
Page file on another hard drive
Norton 360 unistalled
Anything else I could find unistalled or turned off.
Firmware and drivers for on board USB latest from Driver Station as per Blackmagic Recommendations.
Very succesful capture of things shorter than 55 minutes but I have some longer things I would like to capture in one go.
I have used process explorer to watch what happens. Nothing special that I can identify in terms of processes but cpu seems to be going to 100%.
With progessive tweaks the problems remains the same.
I am not aware of any file size limits with Premire Pro or Blackmagic - are there some?
Considering reinstall but would greatly appreciate any insights. My first post so I hope I have provided the right info to help you help me.
Thank you
Andrew

Good that you got it fixed... bridging device drivers have cause problems clear back to the computer version of the stone ages
I still have a Pinnacle Dv500 card (used via dual-boot with WinXP and Premiere 6x) that went through several device driver versions to get everything working right
While everything is working right... make a full "picture" of your hard drive to external USB drive to make recovering easy in case something goes wrong
Hardware crashes or virus infections happen, so you should buy software to make a full
backup of your hard drive to an external USB hard drive... plus, making step-by-step
backups during a new install or major program addition makes it easy to go back a step
if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive
(or the same drive as long as you don't mind writing over everything) since doing a
restore to a new computer won't work due to Windows and many programs having activation
information that is keyed to your hardware (which is why Windows will force you to RE-
Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to
make the bootable CD) and it reads EVERYTHING on the drive, even the hidden
registration information, so everything is restored when needed... and you may restore
the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a
plain web link) but I use the program and it has saved me a LOT of trouble when I had a
hard drive die... and I was able to restore everything and not have to re-install or
re-activate a single program, from Windows on up

Premiere Pro CS5.5.2 will not install after motherboard replacement ?

Premiere Pro CS5.5.2 will not install after mothboard replacement .It was running correctly for 4 weeks prior to replacement due to AC connection issues and Wireless connectivity.
Adobe Case No. 183519673, Adobe Technicians (Asia/Pacific) have worked on this issue for over 3 hours with no results after uninstalling and reinstalling.
Any ideas to fix issue wou;ld be appreciated.

Also posted to the Hardware section http://forums.adobe.com/message/4634472
There is a New forum for Download & Install & Setup problems
http://forums.adobe.com/community/download_install_setup
Or, call Adobe
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7
I suggested providing motherboard brand/model information
[Additional information from other topic added]

Premiere Pro CS5 crashing and not allowing updates

Hello,
I'm experiencing two problems with ProCS5.
First, while in pro, the program crashes when I click on a video clip in the Lib to view it in the monitor.
Second, I tried to update to the program hoping to correct the first issue, but the update returns the error "installation unsuccessful" for unknown reasons.
I am running:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 7 GB
Bus Speed: 1.33 GHz
I just installed a 1.5T hard drive for video editing and formatted as Mac OS Extended (Journaled).
I can view the videos directly from the hard drive and the play back is fine. I'm only having this problem in Premiere Pro CS5.
Any help will be greatly appreciated
Regards,
DS

>just not Mpeg 4s
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

Premiere Pro CS5 Mac 10.6.5 not releasing memory

I have a Mac Pro running 10.6.5 Mac OS, 16GB Ram that I just installed today (had 8GB). I opened up a rather large 11 minute PPro project. I rendered it out. Noticed that the Used Memory was getting larger, up to about 10GB where it leveled off for the remainder of the render. After the render was done, the used memory stayed at 10GB. I exited PPro, and it stayed 10GB. Seems like it's not releasing the memory back to available or am I not understanding how either the Mac OS works with regards to memory or perhaps PPro?

Yes, that appears to be the problem. I disconnected my secondary monitor (which does have a different vertical resolution) and the eyedropper appears to function properly.
Okay, so now I know the cause of the issue. However, disconnecting and reconnecting monitors is not an acceptable workflow. Apparently this problem affects quite a few Premiere Pro CS5 Mac users with dual monitors since you referred to it as a know issue with all versions of Mac OS. Do you know if there is an update (not an upgrade) for Premiere Pro CS5 to address this?
Thanks.

Premiere Pro CS5 will not install on a brand new PC

I am trying to install CS5 on a brand new PC running Windows 8.1 Pro . The installer says that my computer does not meet the requirements to install Premiere and AfterEffects. However, I know that the hardware meets at least the minimum requirements. Any ideas on how to bypass this and install the two components? THanks.

Hi aarroyave,
CS5 has not been tested on Windows 8.1 Pro.
64 bit support is required for After Effects and Premiere Pro CS5
You can check the tech specs at :
Premiere Pro : http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.html#ma in_Adobe_Premiere_Pro_CS5_system_requirements
After Effects : http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-effects.html#main_Af ter_Effects_CS5_system_requirements

Premiere Pro CS5 - Mac Pro - The eye dropper color picker does not work properly

The eye dropper will not pick up on the colors that are hovered over. Instead, the selected color is offset. The best I can figure out is that I'm experiencing a vertical downward offset of about +/-150 pixels and a horizontal offset to the right of about +/-5 pixels.
Does anyone have the same issue and if so have you found a solution?

Yes, that appears to be the problem. I disconnected my secondary monitor (which does have a different vertical resolution) and the eyedropper appears to function properly.
Okay, so now I know the cause of the issue. However, disconnecting and reconnecting monitors is not an acceptable workflow. Apparently this problem affects quite a few Premiere Pro CS5 Mac users with dual monitors since you referred to it as a know issue with all versions of Mac OS. Do you know if there is an update (not an upgrade) for Premiere Pro CS5 to address this?
Thanks.

Looking for Premiere Pro CS5 v5.0.4 update for Elctronic download Version - not avalible in downloads but download manager keeps saying I need it and wont install

My update keeps telling me I need to update my Premiere Pro CS5 to v5.0.4 but tells me there is an error downloading. Tried to download manually and install but it only has a link for retail DVD version and I have an electronic download version. I know CS5 is no longer supported but shouldn't I at least have some where I can download this update? Thanks

that link is the only one for pre cc app updates.
is the current downloadable version cs5.04? if yes, that would explain why there is no update for the downloadable version. you would uninstall your cs5 and install the current download in that situation.
if the current downloadable version is not cs5.04, contact adobe for clarification, http://helpx.adobe.com/x-productkb/global/service1.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I had to re-install Premiere Pro CS5 and now video are files acting funny...

Hello. I had to reformat my system drive and did a fresh install of Windows 7 Home Premium 64-bit and then I did an anytime upgrade to Windows 7 Professional 64-bit. I then re-installed Premiere Pro CS5. Here's the problem. When I open any of my projects that I worked on BEFORE I re-installed Premiere (when I was using Windows 7 Home Premium), the video files on the timeline all look corrupted when I play the timeline now. They have these weird block artifacts and also a constant pulsing thing going on. I deleted all the media cache files and all the media cache database files but, nothing changed even though Premiere conformed every single video file in the project again. Then, I went to "Sequence" and hit "Render Entire Work Area" and after Premiere was finished rendering, I noticed the artifacts and pulsing are completely gone BUT, the video files look like a VHS tape that has been recorded over a few times. The edges of people and things in focus aren't nice and sharp like they were before I re-installed Premiere. I DO NOT have the time or patience to have to delete all the video files and import them again into the project and re-edit the entire scene! Can someone please help me resolve this problem?! I am about done with Premiere!
Is there a way to delete the video source files that are on the left side of the timeline (next to the "Source" window, where they got imported into the project) without deleting the edited video files on the timeline and then re-import the same source video files into the project, kind of like "refreshing" the video files? If this is possible, it seems like this would fix the problem without me having to re-edit everything again.
*Update* My idea of just re-importing the source video clip won't work either. I deleted one of the source video clips, which deleted its reference clip on the timeline, and I re-imported the video source clip to see if it would play all weird in Premiere and sure enough, it has the same exact block artifacts and pulsing effect like all the other source clips in the project. It seems that if that's the case, it might be a codec problem. But, that doesn't make sense because if I open the clip on my hard drive with Windows Media Player or Allplayer, the clips plays perfectly fine and looks like it is supposed to. So, it must be a codec problem in Premiere??? Could it be that Premiere Pro CS5 doesn't work well with Windows 7 Professional? I find that hard to believe. Can someone please help me?
By the way, all the video clips in the project are from my Panasonic GH1 or my Panasonic GH2. They are all 1080p/24 AVCHD. I even made a new sequence within the same project making sure the sequence settings are AVCHD 1080p 24 and still nothing is fixed.

Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

Warp Stabilizer not in Premiere Pro CS5.5

Similar Messages

Maybe you are looking for