Warp stabilizer "Reverse Stabilization" mode with synthesized edges intact?

So here's the end result I need:
My original shot, non-stabilized but with synthesized edges beyond the original frame edge (it's a panning shot so that image information is possible to derive).
I tried using Warp Stabilizer with method "Position", "synthesize edges", and "reversible stabilization". The results are great in terms of creating image beyond the frame edge, but when I use "reverse stabilization" in a duplicated instance of WS it ignores/discards the sythesized edges.
Is it possible to get the position tracking data some other way, so I can use the ol' null object method of inversing the stabilization?
Thanks in advance for any help.

Warp stabilizer produces no tracking information that is accessible by expression or keyframe data so you'll have to try a pre-comp with collapsed transformations.
BTW, once you do the stabilizing you can change the size of your comp and render out a DI (digital intermediate) of your larger video to use in your project. I might try that.

Similar Messages

  • Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

    Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
    pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

    No Clipboard, no copy & paste, as you would not get the full information of the image.
    When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
    Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

  • E72 problem to activate silent mode with 031.023

    now it is very difficult to activate silent mode with the ctrl key !

    I think this is not a bug, but a fix. In the previous FW it was TOO easy to switch to Silent mode and that would happen quite often by mistake (at least to me).
    So I think that Nokia corrected this problem, but did not communicate properly with their customers....
    2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Firefox plug in container has stopped working, even in safe mode with plug ins disabled

    My firefox keeps crashing every 5 - 10 minutes. Sometimes I get a windows error message saying "firefox plugin container stopped working", but most times I don't. These are the actions I've taken so far, with no effect:
    1. Updated all my plug-ins
    2. Run firefox in safe mode with plug-ins disabled
    3. Uninstalled and reinstalled firefox
    4. Run an AVG scan which turned up nothing
    Can anyone offer advice on how to fix this (very annoying) problem?
    I've had to write this in IE because firefox wouldn't stay open long enough for me to copy and paste it into the text box.

    Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

  • How can I get to DFU mode with a broken power button?

    How can I get to DFU mode with a broken power button?

    aarons84 wrote:
    This is bad, but i tried jailbraking my iphone
    You may as well stop there. We can't help you.

  • How to make an applet with curved edges in the browser

    Hi all,
    I m doing an applet application in which i want to show an image inside a player in the website. The edges of the player is designed in curved shape. So i too wanted to do an applet with curved edges. Otherwise my applet and the images are coming out of the player... do any body have come across such a problem. please give me some suggestions. Awaiting for your suggestions and solutions. If u don't understand what i m trying to say let me know..
    Thanks...

    I tried to get the screen height -1 and subtract from
    all the ys in my applet but it doesnt work all the
    time. I am drawing shapes and stuff with an algorithm
    I wrote for class.
    is there a way to get origin(0,0) to the lower left
    screen easily.
    thanksThe only way I can think of would be write a method to convert a "normal" y coord to an applet y coord. That would probably end up being a huge pain in the ass, since you would have to pass all y coords through it before using them, so I suggest you just get used to y being upside down.

  • Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

    Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

    Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
    Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
    marek

  • Firefox 29 When I right click to open in a new tab, the tab will open but it will be a blank page. Tried Firefox Safe Mode & with Ad On Disabled Nothing

    When I right click to open in new tab, the new tab will open but the page is blank. I have tried it in Firefox Safe Mode & with Add Ons Disabled, still doesn't work.

    Hi UKBlue,
    Is your new tab page set to about:blank? You can change this from the about:config page or you can restore defaults by resetting Firefox.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Error when opening XLSX file with Excel 2003 SP3, file does open but in read only mode with temporary name

    I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed.  When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
    "Windows cannot find '<path to file>'.  Make sure you typed the name correctly, and then try again.  To search for a file, click the Start button, and then click Search."
    Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls".  The number seems to increment up each time it happens.
    Now here is the strange part.  If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
    I Googled the error I was getting and found KB211494.  It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case.  Any other ideas?  This is
    really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.

    This may be a file association problem.  To solve that:
    In Windows 7:
    1. Right-click the file,
    2. Select "Open With" 
    select [Your Program Here]
    3. Check always use this program. 
    In Windows XP:
    1. Locate the file as you have described above
    2. Right click the file
    3. Select Open with from the pop-up menu
    4. Click Choose default program…
    5. Select Excel in the Recommended Programs box
    6. Check Always use the selected program to open this kind of file
    7. Click on OK.
    1.  Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
    2. Take a registry backup using the steps given here
    3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
    4. Exit Registry Editor
    5. Undo Step 1 to make Excel available.
    6.  Restart the computer and verify it the issue is fixed.
    If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

  • Reversing a document with MR8M diff value in GR/IR

    When reversing a document with MR8M, differrent amount is posted to GR/IR account and PPV account
    Actual Transaction
    Vendor 123 = 100
    GR/IR account = -80
    PPV account = -20
    After Reversal:
    Vendor 123 = -100
    GR/IR account = 78
    PPV account = 22
    Please let me know what could be the reason?
    Edited by: Rickyy on Apr 27, 2011 9:33 PM

    This sap note explains exactly my problem, but now how do I clear GR/IR account?
                         GRIR Account       PPV account
    CreditMemo     39,319.31        17,834.96
    MR8M             57,294.48     
    So I cannot clear GRIR account because of the amount difference :-S
    Thanks

  • My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

    My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

    What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

  • Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

    Hi,
    I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
    Using qtp in integrated mode worked previously on the solution manager 7.1 system.  Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
    I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
    Sincerely,
    David
    Edited by: David Snyman on Mar 2, 2012 7:38 AM

    Hi Sida,
    Can you check SapLogon.ini file maintaining below location please.
    let me know it resolve the isse, can you forward your details to <email removed by moderator>
    looking forward your response.
    Regards
    Naveen
    File Location
    Use
    C:\Windows\saplogon.ini
    Enable QTP to identify the Solution
      Manager Server
    C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
    Auto log on to SAP Systems for testing
    C:\SAP\FrontEnd\SAPgui\saplogon.ini
    Set Record and Run settings in QTP for
      64 Bit OS
    C:\Program Files
      (x86)\SAP\FrontEnd\SAPgui\saplogon.ini
    Set Record and Run settings in QTP for
      32 Bit OS
    Message was edited by: Manish Kumar

  • My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen.

    My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen after update os7 to os7.04
    My phone is completely disabled, what can i do ?

    Connect to iTunes. The phone is in Recovery mode. Follow the directions in this support document. http://support.apple.com/kb/HT1808

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

Maybe you are looking for