Warping Text On One Side

I was wondering how I could go about warping the text only on one side like the "Red Ferret" in the image below? Is it all manually done?
http://rall.ee/revolution/wp-content/uploads/2013/01/RedFerretLogo.jpg

One way to do it is to select the lettering, go to Object > Envelope Distort > Make with Mesh; Rows: 1 Columns: 1. With Direct Selection tool click lower left anchor point, then click and drag downward (with shift key depressed to maintain vertical if desired). Adjust angle and length of handle(s).

Similar Messages

HP D4260 printer how to print text on one side single 4.5 " by 5"post card using MSword

How do I print text I have composed on a 4.5" by 5" post card using my HP D4260 printer and MS 200 word or another utility like open office? If I could make the printer & software right justified so the card would feed thru the printer that might work but I am unable to do that.

On my OJ Pro 8600, When I go to print a # 10 envelope, it feeds the envelope through and then prints the address on a letter page. I was forced to set the printer preferences to #10 envelope, and within Word, set the paper type to # 10 envelope, set Word up for center feed, and then put everything back to print normally. ON my 6500 all I had to do was hit print. There must be a way to print single envelopes without jumping through all these hoops!!

How can I add a stroke to only one side of text?

How can I add a stroke to only one side of text characters?

I'm probably misunderstanding what you want, so I'll just ask. Is this it?

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

Or choose Window > Arrange > Tile
And, you of course can copy/paste without tiling.

Laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly.

laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly. i've cleaned the assembly a few times beofre to restor the colors as the printer is in a semi-dusti environment. after cleaning the printer was fine, then about a week later, the black - and only the black - stopped printing on the right side of the page. the text is straight across left to right then starts to waver and then then stops altogether. i tried a different black toner cartidge and the problem remains.

> so this is strictly a hardware issue as no drivers are involved. Yup. > Still prints all black. Ok its not the controller. > Still prints all black. Ok its not the fuser. > its still prints all black. OK its not the laser itself > it still prints all black. Not that part either. > What else left is there? Formatter board hasnt been mentioned. Something is sending a command to the printer that is telling it to open up the doors and charge the entire page. Normally the laser is responsible for charging the media. As the media passes over the toner doors it atracts toner particles. Then as the paper continues it rolls past the fuser where heat melts the particles into permanent place. > The power supply board maybe? Perhaps but not likely. If you have a spare you could try it but power supply problems usually result with the machine unable to boot or print correctly, not printing too much as you have described here. > Is there another part you would reccomend I look at?
You could try the old Halfway test just to verify that the problem is coming from teh laser/toner part of the printer. http://www.printertechs.com/printer-troubleshooting/halfway-test Your paper may have somehow gotten a staic charge that opposes the charge of the toner, thus auto attracting all particles in range as it passes over the toner doors. Might want to grab a fresh ream of paper to test and rule somethign crazy like that out. Not very many options left after that.

Warp text in JTable

hi,
I have an application with Jtable.
In the Jtable I want to display warp text.
In order to do so I use HTML tags.
My problem is that when i try to get the height of the cell in order to ditrminate the row height I get wrong height.
I think that the height that return from the cell is one row text height althoght the cell contains more then one row.
I'll be glad to get help with that.
thanks, yaniv

Maybe this article will help:
[http://www.javaspecialists.eu/archive/Issue106.html|http://www.javaspecialists.eu/archive/Issue106.html]

Problem with warp text tool

I have a text layer which I want to do some warping to. When I hit the warp text tool all the options are greyed out ??? Any help ? Incidentally, I tried to just transform warp it but no "handles" appear...

In the create warped text dialog did you click on one
of the options in the dropdown menu. (it's always on none
unless you already have some warped text)
MTSTUNER

How do you extend the frame from one side but not the whole thing?

I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?

In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
Mark

Real instruments pan to one side.

on the older (not '08) version of Garageband, when i record 'real' instruments, they always pan to one-side, even though it's shown as them being in the middle, and also even if i pan it to the other side. but software instruments are fine and are panned to the middle..
so presumably i changed a setting somewhere without realising?

Chris, similar problem; long time GB user, upgraded to intel machine and '08; in editing existing tracks in new 08 version of GB, can't get them to pan; I searched help and noticed the bit on turning off echo and reverb, which I did. still can't get 'em to pan.......using either pan curves or the knob. Made sure the track was mono.....any ideas? I'd be most grateful.........
todd

Why does my Alesis ioj2 express only come out through one side? When I sing into the microphone, it only comes out one side. I've set everything to stereo and it still has not solved the problem. Please help ASAP.

Please help with my problem. I need to start recording!!

Chris Huber wrote:
Why does my Alesis ioj2 express only come out through one side?
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)

In my iPad mini if I use earphones I can hear from only one side

In my iPad mini if I use earphones I can hear from only one side but the earphones work fine with other devices

Have you tried different headphones in your iPad mini?
Check in Settings > General > Accessibility if little slider half way down isn't moved to either side towards "L" or "R".
If it isn't , try to reboot the device, but it's likely that your audio port isn't working correctly. If so, it should definitely be covered by warranty.

Macbook 13 inch late 2008 screen not illuminated on one side

Hi Apple Community,
I need help! My late 2008 13 inch aluminium Macbook screen has 'died' on one side resulting in one side being noticeably dark. The left side has no problems, only the right side.
I am a student living in New Zealand where there is no Apple store in the country I can go to. Local service shop says just to look at it and confirm that one side is dark (which any 2 year old cad identify that it is) will cost a ridiculous $100. Estimated cost will be around $1000 to replace screen.
Has anyone had the same problem and how have you solved it? What is the cost of repair or is there something I can do it help it?
Macbook specs:
MacBook, 13inch, Aluminium, Late 2008
Processor: 2.4 Ghz Intel Core 2 Duo
Memory: 4 GB
Software: OS X 10.9.4 (Mavericks)
I do not have AppleCare
Thanks!

Try these folks at www.usedmac.com. You may have some luck getting technical help from them by email. It is more difficult by phone. You can look through the parts list for what they have in stock for your computer model to get an idea of the prices. You probably won't need any heavy or large parts so some priority mail service won't break the bank. Your problem may simply be a cable but even a back light led or controller circuit board should not be too expensive. It will require some careful work on your part for replacement.
good luck.

I have two different accounts on my iMac 2011 OSX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

I have two different accounts on my iMac 2011 OCX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

I have 2 users on the imac. when entering text in the first account it is duplicated in the second

How can I copy text from one card to another while creating cards using Iphoto?

I created two cards with different pictures using Iphoto on Macnotebook.
I want to use the same text message.
How can I copy text from one card to another?

select the text and copy (edit menu ==> copy) tehn gpo to the next card and paste
LN

How do I copy text from one layer to another?

I have Googled this but not a single answer seems to work.
I am using Photoshop CS4 on OS X 10.6.7.
OK, so I have a layer that has some text in it. I would like to be able to simply copy that text from one layer to another, but this seems to be impossible as the Edit Paste menu item is grayed out after I have copied it in to the clipboard. I can paste it into the SAME layer, but not into another layer.
This is how I am trying to do this.
In the layer with the text, click on the "T" icon to the left.
Click on the text, in the layer that I want to copy.
I select the text (either by clicking and dragging or pressing Command-A).
Next I press Command-C.
Then I click on the layer In the Layer Panel) where I want to paste the text.
Pressing Command-V is impossible because the Edit-Paste menu option is grayed out!!!!
WHY??????
Perhaps more importantly, HOW do I copy text from one layer to another?

First thing you can simply right click on the Text Layer and choose Duplicate Layer. But that will create a new Text Lay
er identical to the one you have.
To answer your question in your case.... Create the Text Layer. Make a New Layer. Or have the layer you want to paste into visible.
Highlight the text layer in the Layer Palette and Ctrl+Click (Win) Cmd+Click(Mac) so that you see marching ants walking around your text.
Edit>Copy.
Then highlight your Layer you want to paste into and hit Edit>Paste or Cmd+V / Ctrl+V.

Warping Text On One Side

Similar Messages

Maybe you are looking for