Warping with clipping mask

Hi,
Does anyone know if there is a way to warp a clipping mask on the mask itself? Whenever I am warping a clipping mask the borders of the warp are on the edges of the artwork in the mask. And not on the mask itself. Often times this distorts the artwork in unfavorable ways.
Thanks in advance.

Acidwire,
I believe something is ailing Illy. You may have a look at the list.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Similar Messages

How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

Seamless repeating pattern - using embedded images with clipping masks

Hi forum,
We struggle a bit creating a seemless repeating pattern that includes embedded images with clipping masks applied.
Our pattern is a 550x550mm black square with various embedded inserted on top. All of these images have Clipping Masks applied to hide unwanted areas.
These images are placed so they create a seamless repeating pattern and this includes areas that overlap the square.
Once we create a swatch from this pattern the repeatable area becomes too big as it includes the unwanted areas hidden by the clipping masks.
Because the repeatable area is now too big it's actually not repeatable.
We tried various things in order to solve this issue. Pathfinder/crop to delete the unwanted areas in the images etc.
None of them worked good enough.
We though of just livetracing the images, but due to the complexity this is not an option.
Do we really have to do our "cutting" in Photoshop or do you know any fancy tricks for issues like this?
Appreaciate your insight
Kenneth

Kenneth,
You may try the destructive deed, with the Clipping Mask selected:
1) In the Transparency palette/panel dropdown list select anything but Normal (Multiply is fine),
2) Object>Flatten Transparency, just keep the defaults including 100% Vector,
3) Shudder.
This should reduce the size to the Bounding Box of the Clipping Path.

Problems with clipping mask, Photoshop CS6

I have been working with a clipping mask around a complex item. This included a large clipping mask around the edge of the item, along with sections inside this path that were also 'cut out'. I am not sure how, but I seem to have done something which is now stopping me from making the additional 'internal' paths. Instead of these areas being blocked by the clipping mask, they are appearing as paths drawn over the image and not as part of the clipping layer (yes, checked that I was working in the right layer). I have checked the 'outside' path and this is all connected - no gaps. I have tried to set up a new file and start again, but now can't seem to make the mask behave properly. Can anyone help?
thanks
FB

THanks for that, but to be honest I am a real novice - learning in pieces - so am not sure how to check path modes etc. ..Any suggestions??
Here's a screen grab of the work and current settings:
Message was edited by: fjb3012. When I try and cut out new sections one of two things happen - I lose the image completely OR the new path sits on top of the image, with no clipping.

Trouble with Clipping Masks

Hello!
I created a pattern in illustrator, and then I created an object, and I wanted to fill half of the object with the pattern, so I used a clipping mask to do this.. however, now when i try to group everything together, the clipping mask in released and the pattern spills all over the artbaord... when i try to copy and paste into a new document, everything is pasted as white instead. When i try to merge the layers, the clipping mask is released...
I'm not sure how to fix this and have been searching for a solution for it. I hope you can help me figure out how to keep the clipping mask from releasing..
Also, I tried rasterizing but that doesnt work either and it makes my shapes all rough and choppy!
Thank you

Thanks for replying but unfortunately that did not help!
I always select with the solid selection tool ^^ infact when i want to select everything i just use command+a.
Anyway, I'm still unable to group or copy the entire picture without the clipping mask releasing..

Some help required with Clipping Masks

Hi,
I'm quite new to illustrator - I've made designs before but really just playing at it.
Now, though, I have a design which I had "grunged" up by applying a texture and knocking out the sections of the design with it in Photoshop. However, I want to learn how to do that in illustrator and thought that clipping mask was the answer.
I can get the clipping mask to work except it creates the opposite effect I am after...It masks the portions of the image I want to keep visible leaving those areas I want masked visible.
In effect I need to inverse the mask but I don't know how to do it in illustrator.
Hopefully, I've made it clear what I mean and I appriciate any advice.
Ta
Malc

You can use the Transparency panel to make an opacity bask as well and inverse that.
Or if you wish use the pathfinder panel to minus front. I think the second icon on top from the left.
Read the help files about opacity masks, pathfinder and clipping mask
and it might also work as a compound path Command 8 or Control 8.
Read about compound paths

Issue with Clipping Mask when scrubbing timeline

Has anyone encountered an issue with editing a clipping mask or repositioning it on the timeline only to see that nothing moves on the timeline when scrubbing the playhead?
This has occurred multiple times on different Edge Animate projects.
So far this has happened on SVGs, pngs, basic shapes, etc.
I posted a video in my adobe cc folder to view as a reference.
I'm using OS X 10.10.3 and Edge Animate 2014.1.1

I right click on the clip in Timeline, choose Effects Mask > Apply
The rectangular mask appears on the screen, I drag one corner in to make it smaller - what the exact dimensions are I know not. The logo I need covered happens to be almost at the exact center of the screen.
I choose the EDIT Tab > Brightness/Contrast > Set the levels so the mask is perfectly white (thus, covering up the logo) > Apply > Done
The preview works. When I output as AVI, MOV, MPG, MP4, etc., the mask that I placed over the logo has now moved either above where I originally placed it or above and to the left.
I have no idea how to answer the second part of your question.

Having a Problem with Clipping Masks

Everytime I add an adjustment layer to CS5 layers palette, the adjustment layer comes in as a clipping mask and is clipped to the layer below. I must have accidently invoked something that is causing this. It is very frustrating and time consuming have to change each layer in my stack. WHAT DID I DO WRONG... and HOW DO I FIX IT.

Noel as I have noted in the past it is easy to code around the bug by recording all add adjustment layers clipped to previous layer then un-clip the ones you want to be applied to all, The problem is this will not fix all the good action that been recorded in the past and download by members in a large community of Photoshop user. I don't have a clue to how many have download actions I made available. I stopped using Adobe exchange while the exchange recorded the number of downloads exchange makes it almost impossible to make updates for they need to approved them first and they never seem to. I know thousands have downloaded my actions but don't know if any use them or who use them. The only contact I have is if someone reports a bug. Yes some get by me to. Most of the downloaders of these actions don't know that Adobe has introduce a bug that may effect actions they downloaded and have been using for many releases of Photoshop without problems. The nasty part is action will work correctly sometime and not other time and when some of the failure happen there is no error message an adjustment layer of the right type is added and may effect most of the document correctly so the error my go un-notice at the time it happens and then may notice at some later date. The bug need to be fixed. Then actions with the work around and those without the work around will work correctly.

Working with clipping masks

I am unsure if this is a question regarding Photoshop or Illustrator but can anyone offer guidelines on how this image was created for the text to be behind part of an image but not all? Example image attached.

Gmez, you made a B&W layer on top, clipped to your text. So the B&W only shows up where the text is. I think it actually looks good, but it's not what you were intending to do. There are a couple of ways to do it. An easy way is to just rasterize your text layer, then put a mask on it (not a clipping mask) and paint out what you don't want. But this method is destructive, so if you want to change the type later you're SOL. For this, considering that you want the background desaturated anyway, I would just duplicate the base layer, put it on top, put a layer mask on it, and paint out the background so the text pops through where you want. It involves a little more masking, but if you do it that way then you can just put a desaturation layer below it, and now your foreground will be fully saturated and cover the text, while the background is desaturated.
Edit - scratch that, I guess you can put a layer mask on a text layer without rasterizing it. Learn something new every day. Just do that, paint out (with black) whatever you don't want on the text layer mask.
As to the desaturation. Try using an adjustment layer instead. It's non-destructive (you can reverse or alter it later) and takes less space in your final file (good practice for later when things get more complicated). Click on the bottom layer, then add a Hue/Saturation adjustment layer, and move the saturation down. Now on the mask on that layer, paint the foreground black to bring back the color. There are better ways to get black and white (that give you more control over your contrast and 'colors'), but hue/saturation is a good first step.
Edit: That magazine cover is hysterical.

How do I export with clipping mask?

I'm a newbie to Illustrator.
I have a starburst design with a clipping mask. When I try to export as png or jpg, there is a transparent or white border around my design - where the items clipped by the clipping mask are hidden.
I have flattened the file before exporting. I have "fit to art board". I have checked the "use art board" box when exporting. Nothing removes the border. My art is 8.5 x 11, and my art board is 8.5 x 11. Any other suggestions?
Thank you!

HI Elizabeth,
Here is a link that will help you with this issue. adobe illustrator - Take away negative space in clipping masks - Graphic Design Stack Exchange This should give you a bit of guidance on this.
Scott

How Copy One Piece of Graphic with Clipping Mask

I am using Illustrator CS5. I have a graphic that has several different object that overlay. I need to cut one piece out of this graphic. I know there is no Crop tool in CS5 so I used the a Clipping Mask. This worked but when I try to select just the visible part that I "clipped" out and paste that part into a new Illustrator file the underlining objects that are hidden with the mask are copied as well. I just want one piece of the graphic. How do I does this? It was so easy with the Crop tool.

jt,
Depending on the artwork, you may get lucky with Object>Path>Divide Objects Below, deleting the outlying parts; only select the path to crop the others.

Cropping Images with Clipping Masks | Learn Illustrator CS6 | Adobe TV

In this video you will learn a quick and easy method for cropping images in Adobe Illustrator CS6 and CS5. Using clipping masks allows you to retain the area of the image you cropped out as well as modify the clipping path later on.
http://adobe.ly/V8tW7S

Is there a way to make a clipping mask for a many-layered image without collapsing all the layers? I'd love to keep my image as is (it's quite complex), I just want to crop the entire thing.
thanks!

Help with clipping mask in illustrator cs5

In Illustrator CS5, is there any way to get rid of the white space around the artwork when exporting a jpg? I currently use the mask tool, but when you export the jpg, it still shows the white space where the clipped objects are. Is there any clipping mask? Or any way to just make the jpg the size of the artboard, that way any of the objects that fall off the edge of the artboard woldn't be included?

Yes but if I use the artboard, when I export it to a jpg it still has the white space around the outside. Some of my clipped images fall outside the clipping mask so there is white space where the physical images are even though the mask technically covers them up. Thanks

Copy object with clipping mask from illustrator to photoshop

I want to copy objects from illustrator to use in photoshop, but the eps file that i am working in has a clipping mask and when i attempt to copy objects in that file from illustrator 6 to photoshop 6, portions (in some cases) all of the object turns black or gray. I'm sure this is a simple noob error (hope my question is clear enough), and it's driving me nuts. I have searched for solutions using terms "clipping mask, black, copy, move, illustrator, photoshop, etc." and can't find any discussions on this topic. Can you please help?
Here are the print screens to show you what i get in ai and ps -
(see blue outlined oval object selected - opaque white gradient)
(when moved to ps, opaque whitish oval turns black)
I'm such a noob! Thanks in advance for your help!

You simply lose the blending modes and transparency settings because this stuff works differently in both programs. You will have to reinstate it manually e.g. if the white highlight is created usuing Add blending mode, you will ghave to use the same in PS...
Mylenium

Help with clipping masks, please?

I am running cs4, I have a picture of a hand holding a piece of paper, I want to put text behind the thumb and the forefinger. I'm thinking clipping mask, but I can't seem to get it to work right. Please help?

Youv'e got your clipping mask reversed. You want to draw paths around the areas you want to keep where the text is concerned. What you currently have would allow you to mask content in the fingers themselves, not outside of them. And you want the clipping mask to be placed on the text, not on the hand image.
Basically you want a path which matches the outline of the card (going around those fingers) then place the text inside that clipping mask.
Red path is the clipping mask....

Warping with clipping mask

Similar Messages

Maybe you are looking for