Warranty Counters Not Displaying in Customer Warranty Check

Dear All
More then two Characterstics for service in warranty master are not displaying in my warranty check when i try to check the warranty for serial numbers.what i have done is
1.Create Characterstics as numeric value.
2.Define warranty counter in customizing.
3.Define new Customer Master warranty and assign these Charaterstics to service.
Only two line items are displayed in my warranty check
Please help
Thank you
Regards
Nomi

Dear All
My warranty counter is time dependent it means that i dont have to use measuring point and measuring document based on the following SAP help :
"There are time-dependent and performance-dependent warranty counters:
The indicator for time-dependence is set in Customizing, then the warranty counter is time-dependent. In this case, you must create a characteristic of the same name, which has a unit of the u201Ctimeu201D dimension, in the class system.
The system can use this to determine from the warranty start date and the value that was stored in the master warranty for this counter, whether the counter check is still valid for the key date."
Any other Clue ?
Thanks in Advance
Nomi

Similar Messages

C540 wireless not working (horrible customer warranty support)

Just spent the last 3 hours of my life doing 1) on a call with tech support unable to troubleshoot wireless networking 2)getting disconnected TWICE with no call backs even though you have my number 3) unable to call back into the system all lines are busy and no way to connect online with support to restablish the connection.
If you can read this. I'm absolutely disappointed with the level and mechanisms for support.
Please contact me Lenovo. Otherwise, I'm never buying a Lenovo product again. Also, I will affirmatively tell my friends and family of my experience if this is not resolved.
This thing is brand new, and there should be a systemic way to troubleshoot wireless networking.
PLEASE CONTACT ME LENOVO

if you are out of warrenty the two phone options you have are 49.99 per incident or 99$ for a year of phone support. this does not cover hardware. if you wish for free support, here, or hp email or hp live chat can assist you.
I can assist you here. First, check in device manager to see if your system sees the wireless card.
Click start
click control panel
click classic view (link on the left)
open device manager
click the arrow or + sign in front of 'network adapters'
list what you see here
Signature:
I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

Crazy problem - PDF shows image in my AA8, image does not display in customer's AA8

Hi all
As title really. First thing I thought was of course was Overprint Preview but I've turned that on and off with no joy. The image is a cover with a panel containing several images - on the customer's screen the bottom right image is there, on our screen it is not. We have printed thousands of these without the image.
I have never seen a problem like this before. If you break the PDF apart with the Pitstop tools there is no image there, yet when the customer views the same file he says an image displays. The file contains no layers. The original PDF was printed as a postscript then distilled.
Anyone else seen this problem?
thanks,
Iain

Hi. Apologies to LoriAUC and Bill@VT for my delay in replying - I've been off sick. Thanks for your replies.
My description wasn't quite right - the image is missing in my AA8 but the customer swears it is there in his AA8. Viewing the same file!
Bill@VT - It's definitely not due to View Large Images being off. That leaves a grey box but this is a white box (also, the setting is ticked on in my Acrobat).
LoriAUC - I hadn't thought of that. Selecting the images mentioned in the Content panel selects them on the page - I go through all the images and they all appear, there's no image entry in the Content panel for the mysteriously missing image. Which confirms my first finding - that there is just no image there.
I can't explain why the customer says it is displaying in their Acrobat. I talked through it with them on the phone to try and make sure there was no confusion about what we were talking about and as far as I can tell they're looking at the same file as I am but just not seeing the same thing! Any more suggestions gratefully received.

JTable column headers not displaying using custom table model

Hi,
I'm attempting to use a custom table model (by extending AbstractTableModel) to display the contents of a data set in a JTable. The table is displaying the data itself correctly but there are no column headers appearing. I have overridden getColumnName of the table model to return the correct header and have tried playing with the ColumnModel for the table but have not been able to get the headers to display (at all).
Any ideas?
Cheers

Class PublicationTableModel:
public class PublicationTableModel extends AbstractTableModel
    PublicationManager pubManager;
    /** Creates a new instance of PublicationTableModel */
    public PublicationTableModel(PublicationManager pm)
        super();
        pubManager = pm;
    public int getColumnCount()
        return GUISettings.getDisplayedFieldCount();
    public int getRowCount()
        return pubManager.getPublicationCount();
    public Class getColumnClass(int columnIndex)
        Object o = getValueAt(0, columnIndex);
        if (o != null) return o.getClass();
        return (new String()).getClass();
    public String getColumnName(int columnIndex)
        System.out.println("asked for column name "+columnIndex+" --> "+GUISettings.getColumnName(columnIndex));
        return GUISettings.getColumnName(columnIndex);
    public Publication getPublicationAt(int rowIndex)
        return pubManager.getPublicationAt(rowIndex);
    public Object getValueAt(int rowIndex, int columnIndex)
        Publication pub = (Publication)pubManager.getPublicationAt(rowIndex);
        String columnName = getColumnName(columnIndex);
        if (columnName.equals("Address"))
            if (pub instanceof Address) return ((Address)pub).getAddress();
            else return null;
        else if (columnName.equals("Annotation"))
            if (pub instanceof Annotation) return ((Annotation)pub).getAnnotation();
            else return null;
        etc
       else if (columnName.equals("Title"))
            return pub.getTitle();
        else if (columnName.equals("Key"))
            return pub.getKey();
        return null;
    public boolean isCellEditable(int rowIndex, int colIndex)
        return false;
    public void setValueAt(Object vValue, int rowIndex, int colIndex)
    }Class GUISettings:
public class GUISettings {
    private static Vector fields = new Vector();
    private static Vector classes = new Vector();
    /** Creates a new instance of GUISettings */
    public GUISettings() {
    public static void setFields(Vector f)
        fields=f;
    public static int getDisplayedFieldCount()
        return fields.size();
    public static String getColumnName(int columnIndex)
        return (String)fields.elementAt(columnIndex);
    public static Vector getFields()
        return fields;
}GUISettings.setFields has been called before table is displayed.
Cheers,
garsher

Please help. my images/web page not displaying ( just outlines) when checking in my browser

Hi. I am using an old dreamweaver. thats not the problem. I
view my web site in browser to check all ok. When i click my link
to next page, it will open it in new window as it should do, but
displays no images (apart from my email link) just outlines.
Is it my folder location?? it is c:/mywebsites/mywebfolder
If i open each page directly to view they are all fine just
when i go from my links..
Helpppppp please

Did you define your local site?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"janeie" <[email protected]> wrote in
message
news:es3v7h$mo9$[email protected]..
> Hi. I am using an old dreamweaver. thats not the
problem. I view my web
> site in
> browser to check all ok. When i click my link to next
page, it will open
> it in
> new window as it should do, but displays no images
(apart from my email
> link)
> just outlines.
> Is it my folder location?? it is
c:/mywebsites/mywebfolder
> If i open each page directly to view they are all fine
just when i go from
> my
> links..
> Helpppppp please
>

DW CS3 does not display confirmation dialog when checking out file

We have 3 developers set up with DW CS3 Version 9 build 3481.
When checking out a file that is already checked out one pc will
display a dialog box to confirm that you want to check-out the file
as it is already checked out by someone else. This is good as we
want this dialog to appear. However on the other 2 pc's there is no
dialog box displayed and the checkout process continues as if the
file was never checked out.
The text of the confirmation dialog box reads as such :
"index.cfm is checked out by first.lastname. Are you sure you want
to override his/her checkout?". I have been through the preferences
and verified that we have setup the sites in the same manner but we
still have this issue.
Is there a known bug regarding this feature? Is there a
preference setting somewhere that I have missed?
thanks

Are each of your developers sharing the same local site?
That's why you are
getting this error if they are. The proper setup would
involve THREE
locations:
1. Local sites (unique to each workstation)
2. Staging server (shared by all workstations)
3. Production server (the live site)
You would have TWO site definitions, which would be -
(for each workstation)
1. Local = #1 (unique location for each workstation)
2. Remote = #2
(for one MASTER workstation)
1. Local = #2
2. Remote = #3
Use the first site definition for day-to-day work and
checking files in/out.
Use the second site definition ONLY for pushing files from
the staging
server to the production server.
That's the only way it will work....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bemor" <[email protected]> wrote in message
news:g3ojq5$4il$[email protected]..
> We have 3 developers set up with DW CS3 Version 9 build
3481. When
> checking
> out a file that is already checked out one pc will
display a dialog box to
> confirm that you want to check-out the file as it is
already checked out
> by
> someone else. This is good as we want this dialog to
appear. However on
> the
> other 2 pc's there is no dialog box displayed and the
checkout process
> continues as if the file was never checked out.
>
> The text of the confirmation dialog box reads as such :
"index.cfm is
> checked
> out by first.lastname. Are you sure you want to override
his/her
> checkout?". I
> have been through the preferences and verified that we
have setup the
> sites in
> the same manner but we still have this issue.
>
> Is there a known bug regarding this feature? Is there a
preference
> setting
> somewhere that I have missed?
>
> thanks
>

Not Displaying Options tab while Checking Global Consistancy in OBIEE 11G

Hi,
We recently upgraded from 10G to 11 G . Here When I checked Global Consistency I got some Errors but they are negligible . I need to disable those errors but am not finding that option .
Please give me the soln.
Thanks in Advance.

Hi,
11g does not allow beginning or trailing spaces in logical names within the RPD. This causes errors in this release instead of warnings as in OBIEE 10g.I would suggest you to close the window.
For more information go through this blog http://www.skurabigroup.com/blog/?p=759
Hope it helps you,if answered award points.
By,
KK

Text fields are not displayed for custom infotypes in Adhoc query

We have developed a custom infotype , which we had incldued in the adhoc query. when we generate output , it is showng codes instead of text . In the output filed , it is hwoing only vaue and Vale and text is diabled.
please let me know , how to add text in the out filed filed
thanks
rajaram B bhat

HI
But in the out put filed , when i click on the output filed , i am get three drop downs , only text , only value and valu & text.
Only value is enabled and other two ate disabled.
How to enable the othet two , i.e text only and value & text
thanks & regards
Rajaram B Bhat

Approval preview not displaying approval details in 'Check Status'

Hi All,
I am facing an issue in the below scenario:-
First a requestor creates an Advice Special Request Form which goes to a purchaser for approval. The purchaser rejects this item and adds a new item by creating a special request form and fills in correct details. While he does this, the cost assignment for the items is different(multiple cost center assignment). Then he approves this Shopping cart. When the requestor Accepts the Changes, he is not able to view the approver details. But once he clicks on change option, then the approval details are shown in the approval preview.
Is there any way that the approval details are shown when the user clicks on the 'Approval preview' as the SC has already gone for approval to the manager? Is there any particular reason why only in change mode he can see the approval details?

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Web composer option not displaying while Customizing Error Messages of Portal applications

Hi
I am trying to customize the error messages through web composer in sap portal but when i Choose System Administration → System Configuration → Knowledge Management → Content Management Web composer option is not shown . I am using netwearver 7.0
please guide me I searched google but couln't find any satisfactory answer.
Thanks

Hi Raima,
From your description I assume you are attempting to implement the steps outlined in the following documentation, is this correct -
Modifying Error Pages - Carrying Out the Initial Configuration - SAP Library
If you are navigating to the KM configuration through the steps you outlined and you do not see WPC Composer listed under 'Content Management' I would suspect that it is not deployed on your system (at least not successfully). It is not included as part of the default stack in EP 7.0 and must be deployed separately. If you do intent to deploy this component, you should also note that the SP level of the KMC-WPC SCA should match the SP level of the other KM and EP components.

Custom Portal Service not displayed under Service Configuration

Hi All,
I am working on EP 7.0 SP8.
SAP Portal is not displaying any custom built Portal Services under Service Configuration tab.
I checked with the permission, and I am having the required authorization for my service.
I am not able to find any document on making the custom service available under Service Configutation to start/stop the service.
Please let me know any reference docs on this.
-Thanks,
Pavan

Hi Pavan,
> working on EP 7.0 SP8
Glad to hear that you are not stuck on EP5 No, really, that is older than old... Anyhow:
> not displaying any custom built Portal Services under Service Configuration tab
There services are only listed if they are configurable, i.e. if they have a service profile with at least one property (compare http://help.sap.com/saphelp_nw70ehp2/helpdata/en/df/e6b74253ffda11e10000000a155106/frameset.htm). Otherwise it makes less sense to restart a service (normally this is done after changing a service profile parameter).
Hope it helps
Detlev

Customer not displayed in third party PO

Hi,
In third party scenario, subsequent purchase order which generated from TP sales order does not display/copy customer number in delivery tab.This customer number is required to display VAT code in PO.
How can the settings be done to copy customer no in third party PO(Delivery tab).
(*Even in the Purchase requisition triggered by TP sales order,customer number is not copied.)
Regards

Hi,
Which item category u r determining in TP sales order,
It must be TAS & shedule line CS , then customer number & adress will visible in po or pr in DELIVERY ADRESS TAB.
Kapil

How can I register Apple care for my iPad if my ipad's warranty is not expire yet?

Apple care for my iPad will be expire in November 14, 2013. I want to extend my iPad's warranty. I already bought Apple Care warranty but when I register online it said I already had a warranty for my iPad. The question is, how can I extend my iPad's warranty?

You can only buy apple care once to extend your original warranty from one year to two. You can't keep reupping it every year if I'm understanding that's what you're trying to do.
After your device is two years old it's out of warranty and not eligible for any warranty from Apple (some retailers sell you up to 3 years of coverage, but you had to get that with the device)

IE7 Does Not Display Custom Error Pages

Hi,
I set up the "Handling Servlet Exceptions (http://www.oracle.com/technology/sample_code/tech/java/codesnippet/servlets/handlingservletexceptions/handlingservletexceptions.html#log) sample code in JDev 10.1.3 on a WindowsXP desktop.
After modifying the web.xml to run the sample "Catch500Error" servlet I discovered IE7 will not display the custom error page but Mozilla Firefox will.
The web.xml looks like this:
<web-app>
<description>web.xml file for HandlingServletExceptions Application</description>
<servlet>
<servlet-name>CatchError500</servlet-name>
<servlet-class>oracle.otnsamples.servlets.CatchError500</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>CatchError500</servlet-name>
<url-pattern>/catcherror500</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<error-page>
<error-code>500</error-code>
<location>/web/500error.html</location>
</error-page>
</web-app>
Does anyone know how to get IE7 to display the custom error page?
TIA,
Jim

The post documents a problem with 'dashboard designer' not 'sharepoint designer' as the post above mentions. I tried the solution that Jilu posts and that does not fix the problem for dashboard designer.
I figured this out. In the master page gallery where my custom master page was deployed, I had to edit the details, change the content type to 'publishing master page'. After that change there was then UI versions for 3 and 4. I change the UI to 4, published
the master page document in the library then dashboard designer saw the custom master page.
Andy Fitch

Leading zeros are not displaying in the excel

Hi Experts,
Leading zeros are not displaying in the excel
Here is the situation:
I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
Normally our material numbers will start with zeros.
But when I check the email excel file , leading zeros are not displaying.
Even I checked the application server (AL11) file, zeros are there.
I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
Could you please advise, how to display leading zeros to the material number in excel file.
Thanks in advance
Raghu

Application server file showing zeros infront of the material number.
1200# 0012401387# XXXXXXXX
Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
I checked custom FUNCTION MODULE . No mistakes in that.
===
Sudhir,
As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
Application server file showing like below
1200# '0012401387# XXXXXXXX
===
Could you please advise anyone how can we acheive this.
Thanks

Warranty Counters Not Displaying in Customer Warranty Check

Similar Messages

Maybe you are looking for