Warranty for Installed Base

Hai,
Is there anyway to handle / attach warranty details through installed base.
regards
SRN

Please check the following views..
Guess warranty can be included for installed bases by configuring these views:
V_T371A
V_T371B
V_T371C
V_T371D
V_T371F
V_T371G
V_T371I
V_T371S_VIEW
V_T371U
V_T371X
V_T371Z
thanks
Bala

Similar Messages

  • User Status for Installed Base

    Hi All,
    Pls let me know where to maintain user status for installed base. I believe status profile could be assigned to transaction level only but still SAP help says it is possible to maintain in installed base.
    Also let me know is it possible to maintain user status for induvidual objects.
    Regards
    Ram.

    Hi Ram,
    In Spro, under the option "Define Installed Base Category and Installation Rules" you have an option to assign status profile to ibase category.
    In ibase the user status can only be maintained at header level according to standard. Further information available in SPRO documentation.
    Best Regards, Adil

  • Hierarchy Category for Installed Base creation

    Hi All,
    We are implementing service management using CRM 5.0 and R/3. We have created some custom material types in R/3 and downloaded to CRM. In CRM configuration "Assignment per Product Type for application Product" the HierarchyID R3PRODSTY is assigned to Product Type "Material". Now, I want to assign the Object family 0401 to a category to be able to create Installed Base records. I cannot modify the Hierarchy R3PRODSTY since it came from R/3. So I created a new hierarchy "IBase" and assigned the Object family and I assigned this hierarchy to Product Type "Material". With this I am able to create a Ibase but not a product because I changed the assignment. Is there straight forward way to have object family in the Hierarchy “R3PRODSTYP" or to be able to create products and Installed Bases simultaneously? Any Input will be greatly appreciated.
    Thanks,
    Uday.

    Hi Ankit ,
    There is some SAP F1 Help. FROM SPRO
    That may answer your question.
    Activate Partner and Address Inheritance
    Use
    In this activity, you can make the following settings for each installed base category:
    Activate partner and adress inheritance for a specified number of installed base hierarchy levels
    The inheritance of partners and addresses is a logical rather than a physical inheritance.
    Activate calculation of geographical coordinates from address information when address data is created or changed
    Enable changes to an installed base for a validity date that is earlier than the system date.
    Partner assignment or address assignment is used during the search for components to take partner inheritance and address inheritance into account.
    For example, this means that in the interaction center or service processes, all components can be found using the business partner.
    Default Settings
    No standard settings are provided.
    The settings are optional. If you do not enter any data, the function is not used.
    Activities
    To activate partner and adress inheritance, select the PInherit. or AdrInherit. checkbox, respectively, and specify the number of levels in the installed base hierachy that should inherit partners or addresses.
    Note: If want partners or addresses to be inherited by all lower-level components in the hierarchy, enter 0 (zero).
    Regards
    Logu

  • Status profile for  Install base component

    Hi,
    As part of project requirement,we have to maintain status profile at Install base component level.Wwe are maintaining one install base for single customer and all his multiple locations comes under this install base.So,as per client requirement we have to mainatin status at Install base object level.
    As per standard functionality,we can maintain status profile at Install base header in status management>status profile>object type
    But,I could not find how to maintain status profile at Install base component of type object  level.I think we have to do enhancement for it.
    Request expert opinion on this.If its configuration,then how to do this.If its BADI,then what are  details of BADI.If its enhancement,then details of it.
    Thanks in advance
    regards
    Naresh

    Hi,
    You need to add the below Object Types in your user status profile.
    Go into your user status profile and click on the Object Types as highlighted below and then enable the list of object types. Then you will be able to see the status profile in the IBase header.
    Enable these object types for IBase.
    Allowed Object Types
    General Object
    Ibase Header
    Product Master Data
    Regards,
    Siraj

  • Tables for Installed Base

    Hi All,
       I have the Assembly Material # and the Assembly Serial # as inputs. I have to pass these inputs to get the Installed Base Number and from the Installed Base Number I need to get the components.
    Pls tell me the flow of the tables where I should look into & Proceed.

    Hi John,
      If i take the Objnr from IBIN & then pass the OBJNR to EQUI I get the Assembly Material and the Assembly Serial Number. But I need the Component and Component Serial # & not the Assembly Material.
    Could u pls tell me the link.

  • Assign warranty to installed base component

    Hello guys :
    When a Ibase is created with a product having warranty , warranty should  automatically assigned i.e it should  show up in warranty fields under the Relationships tab.
    How can I achieve that?
    Hope I'm clear with my question ...else let me know !!
    Thanks ..

    Hi,
    use this fun.mod for ur purpose.
    CRM_IBCWTY_IL_API_CREATE
    best wishes,
    mallik

  • What are BAPI /API for Installed Base in CRM ??

    Hi Experts
    Can any body give list of BAPI /API for IBASE Processing...??
    Thanks,
    AK

    IB_CRM_ADD
    CRM_IBASE_CHECK_TYP
    IB_CRM_API
    CRM_IBASE_ADDRESS_SEARCH
    CRM_IBASE_CHANGE
    CRM_IBASE_COMP_ADDRESS_SEARCH
    CRM_IBASE_COMP_CHANGE
    CRM_IBASE_COMP_CHANGE_TYPE2
    CRM_IBASE_COMP_CREATE
    CRM_IBASE_COMP_DELETE
    CRM_IBASE_COMP_FIND
    CRM_IBASE_COMP_FIND_MULTI
    CRM_IBASE_COMP_FIND_MULTI_R
    CRM_IBASE_COMP_GET_ADDRESS
    CRM_IBASE_COMP_GET_DETAIL
    CRM_IBASE_COMP_GET_FATHER
    CRM_IBASE_COMP_GET_HIERARCHY
    CRM_IBASE_COMP_GET_PARTNER
    CRM_IBASE_COMP_GOTO_DETAIL
    CRM_IBASE_COMP_GOTO_PARTNER
    CRM_IBASE_COMP_IMPORT_DETAIL
    CRM_IBASE_COMP_IMPORT_SUBSCR
    CRM_IBASE_COMP_INDOBJ_SEARCH
    CRM_IBASE_COMP_INDOBJ_SEARCH_R
    CRM_IBASE_COMP_MOVE
    CRM_IBASE_COMP_PARTNER_SEARCH
    CRM_IBASE_COMP_PARTNER_SEARCHR
    CRM_IBASE_COMP_TABLEINFO
    CRM_IBASE_COMP_TRANSL_PARAM
    CRM_IBASE_COPY
    CRM_IBASE_CREATE
    CRM_IBASE_DEQUEUE
    CRM_IBASE_DRILL_DOWN_FOR_COMP
    CRM_IBASE_ENQUEUE
    CRM_IBASE_FIND
    CRM_IBASE_FIND_MULTI
    CRM_IBASE_FREE
    CRM_IBASE_GET_ADDRESS
    CRM_IBASE_GET_ALL
    CRM_IBASE_GET_CHANGE_STATUS
    CRM_IBASE_GET_DETAIL
    CRM_IBASE_GET_HANDLE
    CRM_IBASE_GET_PARTNER
    CRM_IBASE_GOTO_DETAIL
    CRM_IBASE_GOTO_PARTNER
    CRM_IBASE_INITIALIZE
    CRM_IBASE_PARTNER_SEARCH
    CRM_IBASE_PARTNER_SEARCH_RANGE
    CRM_IBASE_SAVE
    CRM_IBASE_SET_HANDLE
    CRM_IBASE_TABLEINFO
    CRM_IBASE_TRANSL_PARAM
    IB_BAPI_IBASE
    BAPI_IBASE_CREATE
    BAPI_IBASE_GET_DETAIL
    BAPI_IBASE_SAVE
    IB_BAPI_COMP
    BAPI_IBASE_COMP_CREATE
    BAPI_IBASE_COMP_GET_DETAIL
    BAPI_IBASE_CREATE
    IB_IBASE_CREATE
    IB_IBASE_CREATE_INITIAL
    CRM_IBASE_COMP_CREATE
    CRM_IBASE_CREATE
    IB_COM2_CREATE_IBASE
    IB_COM_CREATE_IBASE_INITIAL
    *--- Fetch Ibase Handle
        IF ib_handle IS INITIAL.
          CALL FUNCTION 'IB_COM_NEW'
               IMPORTING
                    e_ibco_handle = l_handle.
          ib_handle = l_handle.
        ENDIF.
    <b>Pl. Do reward the points</b>
    Regards,
    Arjun

  • Installed Base - Authorization Management

    Dear Experts
    We're looking for any way to limit authorizations for Installed Base and iObject maintenance. So far we were able to identify COM_PRD as the only relevant authorization object (for iObjects) - I strongly assume there are more sophisticated capabilities than this one? I see authorization groups are available, we're looking for some more flexibility however.
    E.g.
    - differentiate between product and object maintenance
    - limit visibility based on e.g. country
    - limit maintainability of the installed base itself
    Best
    Christian

    Hi Joost, All,
    during our investigation we found that the object you are referring to is not checked any more (SU24 does not return any hits neither in transactions nor in web services). A trace comfirmed this assumption so far.
    We are currently assuming that this object is not used anymore in CRM 2007 and later versions.
    Any comments from anyone here?
    Thanks
    Alex

  • PCUI Installed base -- measuring point exception

    Hi,
    Application: COMM_IBASE ( installed base)
    Path:
    Search for installed base > Select one Installed base> In the tree select one of the attached individual object
    Now Measuring points tab displays.
    Select Measuring point tab -
    > In the drop down select  Measuring point - Ind. Object
    Gives error message
    500 SAP Internal Server Error
    Error message: Basic Customizing in table COMC_IL_UI for structure CRMT_BSP_IL_IOBMP_S_FCAT is missing ( type of termination: ABORT_MESSAGE_STATE )
    Please help me to resolve the same.
    Thanks and Regards,
    Abdul Raheem .S

    Hi Tiest,
    Even I expected the dump.But unforunately there is no dump.
    Vijay,
    I already raised oss message,but most of the times we get quick response in forum.that's what this try.
    Thanks,
    Abdul Raheem .S

  • Need to know How Install Base Items gets Interfaced when an Item is Shipped

    Hi,
    I am creating a sales order with Install Base item. When we book and Ship the Order the Item comes to Install base with the Serial Number.
    Please let me know if there is any workflow or the process which is doing this.
    There is some Standard Process or link between Shiiping and Install base. Please explain this. I have checked the Order Header and line workflow for the Item type and i could'nt find any function which is doing this.
    Thanks and Regards,
    Ragni Gupta

    Thanks a lot for the Info as i was Searching the Line workflow for Install Base Functions. :)
    I am New to Install Base.. I got to know that We are Using SFM to push the Details to Install base
    What are these Xnp_Msgs tables.. Please give more Info On these
    I did some R&D and found Below Tables for Install Base
    csi_t_transaction_lines
    CSI_ITEM_INSTANCES
    csi_t_txn_line_details
    Is there any Other Important Base tables or Interfaces for Install Base. Thanks a lot for your help..
    Please suggest any Documents which will explain these Integration between the Modules so that i can understand the data flow
    Thanks and Regards,
    Ragni Gupta
    Edited by: Ragni^^1234 on May 10, 2013 8:23 AM

  • Installed bases and service contracts

    Hi,
    Is it possible that:
    1. There are multiple installed bases from the same customer being covered in a SINGLE service contract document (i,e, referencing mulitple I-base objects) for the same type of service.
    Example : 100 installations for the same customer being covered for the 3 free services per year through a SINGLE contract document
    2. Is there a functionality where by all the installed bases for a given customer can be seen location wise under a single tree structure ?
    Thanks,
    Dhaval.

    Hi Dhaval,
    It is possible to do this.
    1. You could add all the objects under the object list assignment block in the contract item. So, here you specify that the service item is available as part of the contract for a set of objects.
    2. In this case, you could create the customer's installed base as the root and add all the installed bases under that customer in a hierarchy, while maintaining the Ibase master data. Else, you could search for Installed Base using the search criteria "Header Using Partner Data". But, this does not show a single tree structure.
    Hope this helps.
    Regards,
    Shwetha

  • Individual object settype in installed base

    Hi,
    We have created many set types for individual objects.So,If I go to Individual object application I get a new tab general where all these fields displayed.
    But we need those details in the installed base application itself,while clicking the corresponding individual object.
    Is there any way to get it done without writing Model access class for installed base application.
    Thanks and Regards,
    Abdul Raheem .S

    Hi Abdul,
    This is a new feature for CRM 5.0. To implement this in CRM 4.0 is very difficult because several components are affected. New functionality have to be implemented for the ibase access class, product (iobject) access class and for the settype generation (TA COMM_HIERARCHIE etc.).
    At first the settype generation has to be modified, because if you create or change any settypes in TA COMM_HIERARCHY, several entries in the different tables of the TA CRMC_BLUEPRINT have to be generated. In CRM4.0 these entries will be generated only for the product or iobject application (both use the same access class).
    Then you have to modify the product(iobject) access class: You need a method to set the product guid external and you need a method to control the display mode (if the ibase is locked, no changes at the settypes are allowed, because it is possible that someone edit them in the SAPGUI (IB52)).
    At last you have to modify the access class for the ibase application to handle the product specific data. In this class you have to map the ibase component object key to the product(iobject) guid and you have to call the CHECK_ACTIVE_TABSTRIP method of the product access class before the controller with the settypes tabstrip is displayed the first time (the product tabstrip contains all entries for all settypes and with the first call the access class filters these entries ->product guid->category->settypes).
    Sorry, but a simple implementation is not possible and its not recommended to modify the above mentioned transaction or access classes. In CRM 5.0 this is a standard feature in the ibase application of the pc-ui.
    Best regards,
    Oliver

  • Install Base (CSI)

    could you provide me the link for the ETRIM for "Install Base (CSI)" module.
    Thanks & Regards
    pallis

    Duplicate post -- Install Base (CSI)

  • Installed Base by Call Transaction

    Hi!!
    I have the following questions:
    1) Can I do a call transaction to IB51 (enjoy) ?
    2) Exist a BAPI for installed base?
    Thanks to all!!

    Hello Umberto,
    there are two OSS-notes (178473 and 189231) regarding IB51 and Batchinput. Following these notes, you can call IB51 via Call Transaction. But i've never (until Rel.4.7) found a BAPI .
    Regards Wolfgang

  • Installed base for call center?

    Hi,
    for the CIC implementation where we are going with typical call center functionality where agents handle incoming calls with inquiries and complaints, do we need the installed base? can anyone comment?
    we dont have any returns or warranty for our products
    we sell them, if there is a prob, we resend the product again and customer can keep both...
    thanks,

    Hi,
    Installed base is basically required to keep track of products installed at customer place.
    If you can verywell identify your customer place where product is installed.
    for eg.
    if you install 100 printers at say XYZ company, but this 100 printers may be installed at different branches of XYZ company, it may be across different cities.
    This information you cannot capture for all the 100 printers sold in any of the masterdata.
    Thus you can use installed base to keep a track, how may printers installed at what location.
    During incoming call u identify the BP i.e XYZ ask for the location or printer serial number (Use Individual objects in CRM) to track the printer.
    If you don't have such complex scenario and also you don't need returns or warranty so u can do without installed base.
    Best Regards,
    Pratik Patel
    <b>Reward with points!</b>

Maybe you are looking for